Important Safety Instructions

?????? Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

?????? Do not use this product while driving.

?????? Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to flames or dispose of it in a fire: the battery may explode. Check with local authorities for possible battery disposal instructions.

?????? Do not disassemble, modify, or attempt to repair any component of this product.

?????? Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions require.

SAVE THESE INSTRUCTIONS!

2

3

BTS150 HIGH-DEFINITION SPEAKER

Uniden???s BTS150 high-definition Bluetooth speaker provides clear stereo sound in a compact, portable package. With Bluetooth V2.0 compatibility, the BTS150 pairs with your mobile phone to become a speakerphone for hands free conversations. You can also connect your music player (wired or wireless) for crisp, clear audio.

?????? Bluetooth V2.0.

?????? Up to 2 Bluetooth devices can be paired with your speaker.

?????? Supporting A2DP/AVRCP/HFP/HSP profiles.

?????? Portable

?????? Up to 5 hours of play from a fully-charged battery.

?????? Up to 33 ft (10 m).

?????? Call Waiting feature

The BTS150 speaker is not a data storage device; do not attempt to copy files to it.

What???s in the Box?

?????? BTS150 Speaker

?????? AC Adapter (E18-00774-01) with USB cable.

4

SET UP YOUR BTS150 SPEAKER

Charge the Battery

1.Slide the main power switch to the ON position (see page 8).

2.Insert the adapter???s mini USB connection into your speaker???s USB slot (see page 8).

3.Plug the adapter into your computer.

4.The LEDs flash blue while the battery is charging (charge time = 7.5 hours on a completely empty battery). The LEDs turn solid blue when the battery is fully charged.

Charge the battery fully before using the speaker.

Turn on Your Speaker

When you turn on your speaker for the first time, it automatically goes into pairing mode. The LEDs rapidly flash red and blue while in pairing mode. After you pair Bluetooth devices to your speaker, the next time you turn it on it searches for these paired devices and then moves into a standby state.

1.Slide the main power switch to the ON position.

2.Press and hold for at least 3 seconds. A ???power on??? tone sounds.

3.The LEDs flashes blue and red slowly while looking for Bluetooth devices. It remains steady on (blue) when Bluetooth devices are discovered; otherwise, it keeps flashing.

5

Pair Bluetooth Devices to Your Speaker

Make sure your speaker has been fully charged and is in pairing mode.

Pair First Bluetooth Device

Pair your first Bluetooth device to your speaker when you turn your speaker on for the first time. Be sure your speaker is in pairing mode (see step 2-3 of ???Pair Second Bluetooth Device??? below).

1.Select a Bluetooth V2.0 device (mobile phone or music player) to pair.

2.Select the Searching mode on your Bluetooth device (refer to your Bluetooth device???s owner???s manual for details if necessary).

3.Your Bluetooth device should find BTS150; select it and use 0000 for a pairing code if necessary.

4.Verify that you are connected to your speaker. The Bluetooth LED moves to a steady ON state when pairing is complete.

Pair Second Bluetooth Device

When you want to pair the second Bluetooth device:

1.Turn on your speaker.

2.Press and hold until your speaker beeps twice.

3.Release . The BTS150 is ready to pair.

4.Follow the same procedures for pairing your first Bluetooth device (see above).

6

GETTING TO KNOW THE BTS150 SPEAKER

BTS150 Top

7

NOTE: This key can also turn your BTS150 speaker on and off.

BTS150 Back

8

LEDs

Two LEDs on the front of your speaker provide visual cues to different processes.

9

BTS150 SPEAKER OPERATION

When you want to turn on your speaker, remember to slide the main power switch to the ON position.

Press and hold for at least 3 seconds.

and music playback. Press and release the keys to increase or decrease the volume level

Your speaker sounds an alert tone when it reaches the maximum upper and lower volume levels.

Basic Mobile Phone Operations

When you have an incoming call, the speaker sounds an incoming call tone and the LEDs flash blue. Both the speaker and your mobile phone may ring, depending on your mobile phone settings.

10

Call Waiting

You can receive call waiting notification when your mobile phone is paired to your speaker. The LED flashes and your speaker sounds an alert tone.

Your mobile phone must subscribe to Call Waiting service to use these features; contact your telephone provider for more information.

11

Basic Music Operation

When you pair a Bluetooth music player to your speaker, you can control operation through your speaker.

12

13

SPECIAL FEATURES

Play Music through a Wired Connection

You can still play music through your BTS150 speaker even if your music device is not paired to your speaker. You can physically connect your music device to your speaker with a 3.5 mm minijack cable (not included).

1.Plug one end of the cable into your music device, just like you would a pair of headphones.

2.Plug the other end of the cable into your speaker???s 3.5 mm jack labeled Audio In.

3.Use your music device to start and control music playback and volume through your speaker.

The following restrictions apply when you are playing music through a wired connection:

?????? If both a Bluetooth device and a wired device are connected to your speaker, the Bluetooth device will take priority over the wired device.

?????? The BTS150 does not control the wired device; it only plays music through a wired connection.

14

16

SPECIFICATIONS

?????? Total 6W output (3W / Channel)

?????? Full-range (35 mm) driver / Channel + Passive Radiator

?????? Li-Ion Batt: 1180mAh

?????? Playtime: Up to 5 hours in 80% Volume

?????? Recharging Time: 7.5 hours

?????? Range: Class 2, 10 m

Compatibility

?????? Bluetooth 2.0 or above device with A2DP/AVRCP/ HFP / HSP

Safety and Handling Information

For maximum product life, do not drop, throw, or crush the speaker. Do not expose it to humidity, dust, or temperatures above 51.6??C/125??F.

Lithium-Ion battery information

This device contains a non-removable lithium-ion battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.

17

?? 2011 Uniden Australia Pty Ltd/Uniden New Zealand Limited

Printed in PRC