FTQ352IWX

FTQ352IWB

FTQ352IWW

Electric Range

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

features of your new range

Enhanced convenience. Better cooking. Easy maintenance. Your new electric range has been designed to bring you these benefits and more.

??? The latest in heat-distribution technology

Other ranges with just one fan tend to make a swirl of heat that fails to cover the whole inside of the oven. This means uneven heat distribution and uneven cooking. Your new range has Surround Airvection???, which Samsung innovated by adding a third heating element and a multi-fan system that circulates the heat evenly in all directions. You get more efficient energy consumption and more even cooking.

??? Steam Quick cleaning

Thanks to Steam Quick???, Samsung???s unique technology for light-duty cleaning jobs, keeping your oven spick-and-span is a snap ??? no hassle, no odor, no chemicals. Steam Quick??? cleans the inside of your range with high-temperature steam in just 20 minutes.

??? Bigger is better

With a capacity of 5.7 cubic feet, your new range is equipped with more space than any of its competitors in the U.S. market. This means greater convenience for you when cooking for the holidays or when entertaining.

??? A cooktop with 5 burners

Four main burners with two that dial heat up to different pot sizes.

A smaller warming burner in the center of the range top.

important safety instructions

Read and follow all instructions before using your oven to prevent the risk of fire, electric shock, personal injury, or damage when using the range. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand.

SAFETY SYMBOLS

WARNING: This symbol alerts you to hazards or unsafe practices that could cause serious bodily harm or death.

CAUTION: This symbol alerts you to hazards or unsafe practices that could cause bodily injury or property damage.

Do not attempt or use.

Do not disassemble.

Do not touch.

Follow directions explicity.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

ANTI-TIP DEVICE

To reduce the risk of tipping the range, the range must be secured by a properly installed Anti-Tip device. Refer to the installation manual for instructions.

WARNING

ALL RANGES CAN TIP AND CAUSE INJURIES TO PERSONS

INSTALL THE ANTI-TIP DEVICE PACKED WITH RANGE

FOLLOW ALL INSTALLATION INSTRUCTIONS

Do not step, lean, or sit on the doors of the range. These can cause the range to tip, resulting in burns or serious injuries.

Check to see that the Anti-Tip device is installed properly. Then grasp the top rear edge of the range and carefully attempt to tilt it forward. Verify that the Anti-Tip device is engaged.

If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

Important safety instructions _

FOR YOUR SAFETY

When using electrical appliances, basic safety precautions should be followed, including the following:

Use this appliance only for its intended purpose as described in this Owner???s Manual.

Potentially hot surfaces include the cooktop, areas facing the cooktop, oven vent opening, surfaces near the opening, crevices around the oven door.

Be sure your appliance is properly installed and grounded by a qualified technician.

Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.

Always disconnect power to appliance before servicing by removing the fuse or switching off the circuit breaker.

Do not enter inside the oven.

Do not store items of interest to children in cabinets above a range or on the back guard of a range. Children climbing on the range to reach items could be seriously injured.

Do not leave children alone. Children should not be left alone or unattended in an area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

Never use your appliance for warming or heating the room.

Do not use water on grease fires. Turn off the oven to avoid spreading the flame. Smother the fire or flame by closing the door or use dry chemical, baking soda, or foam-type extinguisher.

Storage in or on appliance. Flammable materials should not be stored in an oven or near surface units. Be sure all packing materials are removed from the appliance before operating it. Keep plastics, clothes, and paper away from parts of the appliance that may become hot.

Wear proper apparel. Loose-fitting or hanging garments should never be worn while using the appliance.

Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let the potholder touch hot heating elements. Do not use a towel or other bulky cloth.

Teach children not to play with the controls or any other part of the range.

_ Important safety instructions

SURFACE COOKING UNITS

Never leave surface units unattended at high heat settings. Boilovers cause smoking and greasy spillovers that may ignite.

Do not lift the cooktop. Lifting the cooktop can lead to damage and improper operation of the range.

Do not operate the cooktop when there is no cookware. If the cooktop operates without a cookware, the control knob will become hot.

Never use the glass cooktop surface as a cutting board.

Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls have been turned off.

Be careful when placing spoons or other stirring utensils on glass cooktop surface when it is in use. They may become hot and could cause burns.

Use proper pan sizes. This appliance is equipped with surface units of different size. Select utensils having fl at bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper relationship of utensil to burner will also improve effi ciency.

Glazed cooking utensils. Only certain types of glass, glass/ceramic, ceramic,earthenware, or other glazed utensils are suitable for range-top service without breaking due to the sudden change in temperature.

Utensil handles should be turned inward and not extend over adjacent surface units. To reduce the risk of burns, ignition of fl ammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.

Read and follow all instructions and warnings on the cleaning cream labels.

Be sure you know which control knob operates each surface unit. Make sure you turned on the correct surface unit.

Always turn the surface units off before removing cookware. When preparing fl aming foods under the hood, turn the fan on.

Keep an eye on foods being fried at high or medium high heat settings.

APPLIANCE OUTLETS

The 120V appliance outlets located on the control console may be used to run portable appliances placed on countertops beside the range.

The outlets operate independently and are not affected by range control settings.

Do not place portable appliances on the cooktop. Damage to the portable appliance could result if the cooktop is hot.

Appliance outlet circuit breakers: The circuit breakers for the appliance outlets on your range are located on top of the control console.They are rated for 15 amps, that may trip if the appliance plugged into it exceeds 15 amps. To reset the circuit breaker, press the switch of located on the control console.

If appliance outlet don???t operate, test out your small portable appliance by plugging into other outlets.

Circuit

Breakers

Important safety instructions _5

OVEN

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF THE OVEN. Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns. Among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors.

Do not heat unopened food containers. Build-up of pressure may cause container to burst and result in injury.

Do not use the oven to dry newspapers. If overheated, they can catch on fire.

Do not use the oven for a storage area. Items stored in an oven can ignite.

Use care when opening door. Let hot air or steam escape before you remove or replace food in the oven.

Protective liners. Do not use aluminum foil to line the oven bottoms, except as suggested in the manual. Improper installation of these liners may result in a risk of electric shock or fire.

Keep oven vent ducts unobstructed. The oven vent is located above the right rear surface unit. this area could become hot during oven use. Never block this vent and never place plastic or heat-sensitive items on vent

Placement of oven racks. Always place oven racks in the desired location while the oven is cool. If the rack must be moved while oven is hot, do not let the potholder come in contact with the hot heating element in the oven.

Do not allow aluminum foil or meat probe to contact heating elements.

WARMING DRAWER

DO NOT TOUCH THE HEATING ELEMENT OR THE INTERIOR SURFACE OF THE DRAWER. These surfaces may be hot enough to burn.

REMEMBER: The inside surface of the drawer may be hot when the drawer is opened.

The purpose of the warming drawer is to hold hot cooked foods at serving temperature.

Always start with hot food; cold food cannot be heated or cooked in the warming drawer.

Use care when opening the drawer. Open the drawer a crack and let hot air or steam escape before removing or replacing food. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

Do not use the drawer to dry newspapers. If overheated, they can catch on fire.

Do not use aluminum foil to line the drawer. Foil is an excellent heat insulator and will trap heat beneath it. This will upset the performance of the drawer and it could damage the interior finish.

Do not leave paper products, plastics, canned food or combustible materials in the drawer. Never leave jars or cans of fat drippings in or near your drawer.

Do not warm food in the drawer for more than three hours.

_ Important safety instructions

SELF-CLEANING OVENS

Do not clean door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.

Never keep pet birds in the kitchen. The health of birds is extremely sensitive to the fumes released during an oven self-clean cycle. Fumes may be harmful or fatal to birds. Move birds to a well-ventilated room.

Clean in the self-clean cycle only parts listed in this manual. Before self-clean the oven, remove the broil pan , rack, utensils, and food.

No commercial oven cleaner or oven liner protective coating of any kind should be used in or on the outside of the oven. Use only a ceramic cooktop cleaner or the cleaner supplied with this appliance on the glass cooktop.

Nickel oven shelves should be removed from the oven before beginning the self-cleaning cycle, or they may discolor.

If the self-clean mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

VENTILATING HOOD

Clean ventilating hoods frequently. Grease should not be allowed to accumulate on the hood or filter.

When flaming foods under the hood, turn the fan on.

GLASS/CERAMIC COOKING SURFACES

DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS. Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among these areas are the cook-top and facing the cook-top.

Do not cook on broken cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock. Contact a qualified technician immediately.

Clean cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.

Before you begin

Clean the oven thoroughly before using for the first time. Remove accessories and operate the oven at the bake setting at 400??F for 1 hour before using. There will be a distinctive odor; this is normal, but ensure your kitchen is well ventilated during this conditioning period.

Important safety instructions _

contents

introducing your new range

9

surface cooking

10

using the warming drawer

16

operating the oven

18

maintaining your appliance

38

troubleshooting

48

warranty

52

9 Overview

9What???s included with your range

10About surface cooking

12How to set the appliance for surface cooking

14 Using the proper cookware

14Choosing the proper cookware

15Protecting the smoothtop surface

16About the warming drawer

17Turning the warming drawer on or off

18The oven control panel

19Setting the clock

20Minimum and maximum settings

20Setting the kitchen timer

21Using the oven racks

22Baking

23Convection baking

25 Convection roasting

27Timed cooking

28Delay timed cooking

29Broiling

31Using the custom cook feature

32Proofing

33Using the keep warm function

33Turning the oven light on and off

34Extra features

38 Self-cleaning

40Steam-cleaning

41Care and cleaning of the oven

43 Care and cleaning of the glass cooktop

45Removing and replacing the oven door

46Removing and replacing the warming drawer

47Changing the oven light

48Troubleshooting

_ Contents

introducing your new range

OVERVIEW

Surface control knobs

See page 11 for more information

Oven control panel

See page 18 for more information

Automatic oven light switch

Oven light

Self/steam clean latch

Convection fan

Gasket

Shelf position

Glass surface

Oven door

Warming drawer

INTRODUCING 01

WHAT???S INCLUDED WITH YOUR RANGE

Introducing your new range _9

surface cooking

About surface cooking

BEFORE COOKING

CAUTION ??? Do not use the glass cooktop surface as a cutting board.

???Do not place or store items that can melt or catch fire on the glass cooktop, even when it is not being used.

???Turn the surface units on only after placing the cookware.

???Do not store heavy items above the cooktop surface. They could fall and damage it.

DURING COOKING

CAUTION ??? Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon holders, or plastic wrappings on the range when it is in use. The hot air from the vent could melt plastics or ignite flammable items.

???Make sure the correct surface unit is turned on.

???Never cook directly on the glass. Always use cookware.

???Always place the pan in the center of the surface unit you are cooking on.

???Never leave surface units unattended while using a high heat setting. Boilovers cause smoking and greasy spillovers that may catch on fire.

???Turn the surface units off before removing cookware.

???Do not use plastic wrap to cover food. Plastic may melt onto the surface and be very difficult to remove.

AFTER COOKING

CAUTION ??? Do not touch the surface units until they have cooled down.

???The surface may be still be hot and burns may occur if the glass surface is touched before it has cooled down sufficiently.

???Immediately clean spills on the cooking area to prevent a tough cleaning chore later.

???If cabinet storage is provided directly above the cooking surface, make sure that the items are infrequently used and can be safely stored in an area subjected to heat. Temperatures may be unsafe for items such as volatile liquids, cleaners or aerosol sprays.

About the radiant surface elements

The temperature rises gradually and evenly. As the temperature rises, the radiant element will glow red. To maintain the selected setting, the element will cycle on and off. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle. For efficient cooking, turn off the element several minutes before cooking is complete. This will allow residual heat to complete the cooking process.

Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is normal and can occur if the cookware is too small for the radiant element or if the cookware bottom is not flat.

10_ Surface cooking

Location of the radiant surface elements and controls

The radiant control knobs operate the radiant surface elements on the cooktop as shown below.

15 2

Hot surface indicator

???Comes on when the unit is turned on or hot to the touch.

???Stays on even after the unit is turned off.

???Glows until the unit is cooled to approximately 150??F.

Cooking areas

???The cooking areas on your range are identifi ed by permanent circles on the glass cooking surface. For the most effi cient cooking, fi t the pan size to the element size.

???Pans should not extend more than ????? to 1??? beyond the cooking area.

???When a control is turned on, a glow can be seen through the glass cooking surface. The element will cycle on and off to maintain the preset heat setting, even at high settings.

???For more information on selecting proper types of cookware, refer to the section ???Using the proper cookware??? on page 14.

COOKING SURFACE 02

Surface cooking _11

How to set the appliance for surface cooking

???At high or medium-high settings, never leave food unattended. Boilovers cause smoking and greasy spillovers may catch on fire.

???Be sure you turn the control knob to OFF when you finish cooking.

???The area between the high and off settings, are not appropriate for cooking.

Single surface unit control knob (left rear, right rear)

1. Push the knob in.

2. Turn in either direction to the setting you want.

??? At both the off and high settings, the knob clicks into position.

Dual surface unit control knob (left front, right front)

The dual surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.

1. Push the knob in.

2. Turn in either direction to the setting you want.

??? To use the small surface unit, turn the control knob to the small burner (A) settings.

??? To use the large surface unit, turn the control knob to the large burner (B) settings.

When changing from a high heat setting to a lower heat setting, the surface unit may stop glowing. This is normal.

Recommended settings

12_ Surface cooking

Using the warming center

The warming center, located in the back center of the glass surface, will keep hot, cooked food at serving temperature.

???Always use potholders or oven mitts when removing food from the warming center as cookware and plates will be hot.

???When warming pastries and breads the cover should have an opening to allow moisture to escape.

???Do not use plastic wrap to cover foods. Plastic may melt onto the surface and be very diffi cult to clean.

???Food should be kept in its container and covered with a lid or aluminum foil to maintain food quality.

???Always start with hot food. Eating uncooked or cold food placed on the warming center could result in illness.

1. Turn the warming center on.

Press the WARMING CENTER ON/OFF pad.

2. Select the power setting you want.

Pressing the WARMING CENTER LEVEL pad once will set it to the level 1 setting. Press the pad twice for the level 2 setting, 3 times for level 3.

. Turn the warming center off.

Press the WARMING CENTER ON/OFF pad.

???Pressing the CLEAR/OFF pad does not turn the warming center off.

???The surface warmer will not glow red like the cooking elements.

???For best results, all foods on the warming center should be covered with a lid or aluminum foil. When warming pastries or breads, the cover should be vented to allow moisture to escape.

Recommended settings

1Breads/pastries, casseroles, gravies, eggs

2Dinner plate with food, soups (cream), vegetables, sauces, stews, meats  Fried foods, soups (liquid), hot beverages

COOKING SURFACE 02

Surface cooking _1

USING THE PROPER COOKWARE

Using the right cookware can prevent many problems, such as uneven cooking or extended cooking times. Using the proper pans will reduce cooking times and cook food more evenly.

Check for fl atness by rotating a ruler across the bottom of the cookware.

???Always match pot diameter to element surface diameter.

Heavy handle tilts pan.

CHOOSING THE PROPER COOKWARE

What your cookware is made of determines how evenly and quickly heat is transferred from the surface element to the pan bottom.

???ALUMINUM - Excellent heat conductor. Some types of food will cause the aluminum to darken. (Anodized aluminum cookware resists staining & pitting.). If aluminum pans are slid across the ceramic cooktop, they may leave metal marks that resemble scratches. Remove these marks immediately.

???COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see above).

???STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.

???CAST IRON - A poor conductor; retains heat very well. Cooks evenly once cooking temperature is reached. Not recommended for use on ceramic cooktops.

???ENAMELWARE - Heating characteristics will vary depending on base material. Porcelain- enamel coating must be smooth to avoid scratching ceramic cooktops.

???GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass.

1_ Surface cooking

Protecting the smoothtop surface

Cleaning

???Clean the cooktop before using it for the first time.

???Clean your cooktop daily or after each use. This will keep your cooktop looking good and can prevent damage.

???If a spillover occurs while cooking, immediately clean the spill from the cooking area while it is hot to prevent a tough cleaning chore later. Using extreme care, wipe the spill with a clean dry towel.

???Do not allow spills to remain on the cooking area or the cooktop trim for a long period of time.

???Do not use abrasive cleansing powders or scouring pads, which will scratch the cooktop.

???Do not use chlorine bleach, ammonia, or other cleansers not specifically recommended for use on a glass-ceramic surface.

Preventing marks and scratches

???Do not use glass cookware. They may scratch the cooktop.

???Do not place a trivet or wok ring between the cooktop and the pan. These items can mark or scratch the cooktop.

???Make sure the cooktop and the pan bottom are clean.

???Do not slide metal pans across the cooktop.

Preventing stains

???Do not use a soiled dish cloth or sponge to clean the cooktop surface. A film will remain, which may cause stains on the cooking surface after the area is heated.

???Continuously cooking on a soiled surface may/will result in a permanent stain.

Preventing other damage

???Do not allow plastic, sugar, or foods with high sugar content to melt onto the hot cooktop. Should this happen, clean immediately.

???Do not let a pan boil dry as this will damage the cooktop. and the pan.

???Do not use the cooktop as a work surface or cutting board.

???Do not cook food directly on the cooktop without the proper cookware.

COOKING SURFACE 02

Surface cooking _15

using the warming drawer

About the warming drawer

The warming drawer will keep hot, cooked foods warm. Always start with hot food. Do not use to heat cold food other than crisping crackers, chips or dry cereal.

Allow approximately 25 minutes for the warming drawer to preheat.

???Do not line the warming drawer or pan with aluminum foil. Foil is an excellent heat insulator and will trap heat beneath it. This will upset the performance of the drawer and could damage the interior finish.

???Do not put liquid or water in the warming drawer.

???All foods placed in the warming drawer should be covered with a lid or aluminum foil. When warming pastries or breads, the cover should be vented to allow moisture to escape.

???Remove serving spoons, etc., before placing containers in the warming drawer.

???Food should be kept hot in its cooking container or transferred to a heat-safe serving dish.

Plastic containers or plastic wrap will melt if in direct contact with the drawer, pan or a CAUTION hot utensil. Melted plastic may not be removable and is not covered under your warranty.

16_ Using the warming drawer

TURNING THE WARMING DRAWER ON OR OFF

1. Set the warming drawer to the heat level you want.

Press the WARMING DRAWER pad once for low, twice for medium, or 3 times for high.

The warming drawer starts automatically once you have fi nished selecting the level you want.

2. Turn the warming drawer off.

Press the WARMING DRAWER pad when the warming level is high.

???Pressing the CLEAR/OFF pad does not turn the warming drawer off.

???The warming drawer cannot be used during a self-cleaning cycle.

Recommended settings

???Different types of food may be placed in the warming drawer at the same time. For best results, do not leave foods in the warming drawer for longer than 1 hour. Do not leave smaller quantities or heat-sensitive foods, such as eggs, for longer than 30 minutes.

???The warming drawer will shut off automatically after 3 hours.

DRAWER WARMING 03

Using the warming drawer _1

operating the oven

THE OVEN CONTROL PANEL

READ THE INSTRUCTIONS CAREFULLy BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this user manual.

1.DISPLAy: Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode, and the times set for the timer or automatic oven operations.

2.NUMBER PADS: Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the start time and length of operation for timed baking.

. SET/START: Must be pressed to start any cooking or cleaning function.

. CLEAR/OFF: Press to cancel all oven operations except the clock and timer, warming center, warming drawer.

5. CLOCK AM/PM: Press to set the time of day.

. OVEN LIGHT: Press to turn the oven light on or off.

. CUSTOM COOK: Press to record and recall your favorite recipe setting.

. KITCHEN TIMER ON/OFF: Press to select the timer feature.

9.SELF CLEAN: Press to select self-cleaning function.

10.STEAM CLEAN: Press to select steam-cleaning function.

11.DELAy START: Use along with Bake, Conv. Bake, Conv. Roast, Cooking Time, and Self Clean pads to set the oven to start and stop automatically at a time you set.

12.COOKING TIME: Press and then use the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

1. BROIL: Press to select the broil function.

1. BAKE: Press to select the bake function.

15. CONVECTION BAKE: Press to select baking with the convection function.

1. CONVECTION ROAST: Press to select roasting with the convection function.

1. KEEP WARM: Press to keep cooked foods warm.

1. PROOF: Press to select a warm environment useful for rising yeast-leavened products.

1_ Operating the oven

SETTING THE CLOCK

The clock must be set to the correct time of day for the automatic oven timing functions to work properly.

???The time of day cannot be changed during a timed cooking, a delay-timed cooking or a self- cleaning cycle.

???You can choose between a 12-hour or 24-hour display. The default is 12-hour.

How to set the clock

1. Start the set up.

Press the CLOCK AM/PM pad.

2. Select AM or PM.

Press the CLOCK AM/PM pad again, once to select AM or twice to select PM.

This step is skipped in the 24-hours display mode.

. Enter the present time.

Enter the current time in hours and minutes on the number pad, eg. 1, 3, 0, for 1:30.

. Exit the set up.

Press the SET/START or CLOCK AM/PM pad.

How to change between a 12-hour and 24-hour display

1. Start the set up.

Press CLOCK AM/PM and 0 on the number pad at the same time for 3 seconds.

The display will show the present mode (eg. 12 hour).

2. Select the display mode you want.

Press 0 on the number pad to select 12 hour or 24 hour.

Pressing 0 on the number pad changes the display between 12 hour and 24 hour.

. Exit the set up.

Press the SET/START pad.

OVEN THE OPERATING 04

Operating the oven _19

MINIMUM AND MAXIMUM SETTINGS

All of the features listed have minimum and maximum time or temperature settings.

A beep will sound each time a pad on the control panel is pressed and the entry is accepted. An error tone will sound in the form of a long beep if the entered temperature or time is below the minimum or above the maximum setting for the feature.

SETTING THE KITCHEN TIMER

The kitchen timer serves as an extra timer that will beep when the set time has elapsed. It does not start or stop cooking functions. The feature can be used during any of the other oven functions.

How to set the timer

1. Turn the timer on.

Press the KITCHEN TIMER ON/OFF pad.

2. Select the unit of time you want.

Press the KITCHEN TIMER ON/OFF pad once to select hours/ minutes, twice to select seconds or three times to turn the kitchen timer off.

. Enter the amount of time you want.

Enter the amount of time you want using the number pad, eg. 1, 5. The timer can be set for any amount of time from 1 minute to 9 hours and 99 minutes or 1 second to 99 minutes and 99 seconds. If you make a mistake, press the KITCHEN TIMER ON/OFF pad and start again.

. Start the timer.

Press the KITCHEN TIMER ON/OFF pad.

5. When the set time has elapsed, the oven will beep and the display will show End until you press the KITCHEN TIMER ON/OFF pad. You can cancel the timer at any time by pressing the KITCHEN TIMER ON/OFF pad.

20_ Operating the oven

USING THE OVEN RACKS

Oven rack positions

Baking layer cakes

Centering the baking pans in the oven as much as possible will produce better results. If baking with more than one pan, place the pans so each has at least 1??? to 1????? of air space around it.

If cooking on multiple racks, place the oven racks in positions 2 and 5. Place the cookware as shown in the fi gures below.

OVEN THE OPERATING 04

Before using the racks

The oven has two racks.

Each rack has stops that need to be placed correctly on the supports. These stops will keep the rack from coming completely out.

Operating the oven _21

BAKING

The oven can be programmed to bake at any temperature from 150??F to 550??F.

How to set the thermostat

1. Start the set up.

Press the BAKE pad. The default temperature is 350??F.

2. Enter the temperature you want on the number pad, eg. 3, 7, 5.

. Start the bake function.

Press the SET/START pad. The temperature display will start to change once the oven temperature reaches 150??F.

. If you want to cancel baking or if you have fi nished, press the

CLEAR/OFF pad.

Place food in the oven after preheating if the recipe calls for it. Preheating is very important for good results when baking cakes, cookies, pastry, and breads. After the oven has reached the desired temperature, a long beep will sound 6 times.

How to adjust the thermostat while cooking

1. Start the set up.

Press the BAKE pad. The display will show the present temperature, eg. 375??F.

2. Enter the temperature you want, eg. 425??F, by using the number pad.

. Complete the entry by pressing the SET/START pad.

22_ Operating the oven

CONVECTION BAKING

cooked on a single oven rack will generally cook faster and more evenly with convection baking. Multiple oven

rack cooking may slightly increase cook times for some foods, but the overall result is time saved. Breads and pastries brown more evenly.

Tips for convection baking

The amount of time you save will vary depending on the amount and type of food you are cooking. When baking cookies or biscuits, you should use pans with no sides or very low sides to allow the heated air to circulate around the food. Using a pan with a dark fi nish will allow faster cooking times.

When using convection baking with a single rack, place the oven rack in position . If cooking on multiple racks, place the oven racks in positions 2 and 5.

When baking a cake, using the bake mode will produce better results.

How to set the oven for convection baking

1. Start the convection baking mode.

Press the CONV. BAKE pad. The default temperature is 350??F.

2. Enter the temperature you want, eg. 400??F, by using the number pad.

. Press the SET/START pad to begin convection baking.

Conv. Bake and the adjusted oven temperature, eg. 375??F, will appear in the display for 2 seconds.

The temperature display will start to change once the oven temperature reaches 150??F.

A beep will sound 6 times when the adjusted oven temperature, eg. 375??F, is reached and the display will show the auto-converted oven temperature.

. Turn off or cancel convection baking by pressing the CLEAR/OFF pad.

In convection baking mode, the oven automatically reduces the set regular baking temperature by 25??F to the appropriate conversion temperature.

The convection oven fan shuts off when the oven door is opened.

DO NOT leave the door open for long periods of time while using convection cooking or you may shorten the life of the convection heating element.

OVEN THE OPERATING 04

Operating the oven _2

Recommended convection baking guide

*The convection bake temperature is 25??F less recommended on packages or recipes. The temperature in this chart has been reduced 25??F.

** Actual times depend on the mixes or recipes baked. Follow recipe or package directions and reduce temperature appropriately.

24_ Operating the oven

CONVECTION ROASTING

Convection roasting is good for cooking large tender cuts of meat, uncovered.

Heat comes from the top heating element. The convection fan circulates the heated air evenly over and around the food. Meat and poultry are browned on all sides as if they were cooked on a rotisserie. The heated air seals in juices quickly for a moist and tender product while, at the same time, creating a rich golden brown exterior.

How to set the oven for convection roasting

1. Start the convection roasting mode.

Press the CONV. ROAST pad. The default temperature is 350??F.

2. Enter the temperature you want, eg. 400??F, by using the number pad.

. Press the SET/START pad to begin convection roasting.

Conv. Roast and the adjusted oven temperature, eg. 375??F, will appear in the display for 2 seconds.

The temperature display will start to change once the oven temperature reaches 150??F.

A beep will sound 6 times when the adjusted oven temperature, eg. 375??F, is reached and the display will show the auto-converted oven temperature.

. Turn off or cancel convection roasting by pressing the CLEAR/ OFF pad.

In the convection roasting mode, the oven will automatically reduce the set regular baking temperature by 25??F to the appropriate conversion temperature.

The convection oven fan shuts off when the oven door is opened.

DO NOT leave the door open for long periods of time while using convection cooking or you may shorten the life of the convection heating element.

When you use the convection roasting feature, it is important that you use the broil pan and insert. The pan is used to catch grease spills and the grid is used to prevent grease spatters.

OVEN THE OPERATING 04

Operating the oven _25

Recommended convection roasting guide

*Roasting times are approximate and may vary depending on the shape of the meat.

The convection roast temperature is 25??F less recommended on packages or recipes. The temperature in this chart has been reduced 25??F.

** Stuffed turkey requires additional roasting time. The minimum safe temperature for stuffing in poultry is 165??F.

26_ Operating the oven

TIMED COOKING

In a timed cooking, the oven turns on immediately and cooks for the length of time you select. At the end of the cooking time, the oven turns off automatically.

???You can use the timed cooking feature only with another cooking operation (bake, convection bake, or convection roast).

???You can set the oven for a timed cooking before setting other cooking operations.

???The clock must be set for the correct time of day.

How to set the oven for timed cooking

1. Enter the set up.

Press the pad for the cooking operation you want, eg. BAKE. The default temperature is 350??F.

2. Enter the temperature you want, eg. 375??F, by using the number pad.

. Press the COOKING TIME pad.

. Enter the cooking time you want, eg. 45 min, by using the number pad.

You can set the cooking time for any amount from 1 minute to 9 hours and 99 minutes.

5. Press the SET/START pad to begin cooking operation.

The temperature display will start to change once the oven temperature reaches 150??F.

The oven will continue to cook until the set amount of time has elapsed, then turn off automatically unless the keep warm feature was set. (Refer to the section on the keep warm feature on page 33.)

. You can cancel a timed cooking at any time by pressing the

CLEAR/OFF pad.

Place food in the oven after preheating if the recipe calls for it. Preheating is important for good results when baking cakes, cookies, pastry, and breads. After the oven has reached the desired temperature, a long beep will sound 6 times.

Use caution with the timed cooking or delay timed cooking features. Use these

CAUTION features when cooking cured or frozen meats and most fruits and vegetables. Foods that can easily spoil, such as milk, eggs, fi sh, meat or poultry, should be chilled in the

refrigerator fi rst. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be removed promptly when cooking is completed. Eating spoiled food can result in sickness from food poisoning.

OVEN THE OPERATING 04

Operating the oven _2

DELAY TIMED COOKING

In a delay timed cooking, the oven???s timer turns the oven on and off at times you select in advance.

???You can use the delay timed cooking feature only with another cooking operation (bake, convection bake or convection roast).

???You can set the oven for a delay timed cooking before setting other cooking operations.

???The clock must be set for the correct time of day.

How to set the oven for delay timed cooking

1. Position the oven rack(s) and place the food in the oven. 2. Enter the set up.

Press the pad for the cooking operation you want, eg. BAKE. The default temperature is 350??F.

. Use the number pads to enter the temperature you want, eg. 375??F.

. Press the COOKING TIME pad.

5. Enter the cooking time you want, eg. 45 min, by using the number pad.

You can set the cooking time for any amount of time from 1 minute to 9 hours and 99 minutes.

. Press the DELAy START pad.

???AM, PM??? is not displayed in 24 hour mode.

. Select AM or PM.

Press the CLOCK AM/PM pad once to select AM or twice to select PM.

This step is skipped in the 24-hour display mode.

. Enter the time you want the oven to turn on, eg. 4:30, by using the number pad.

9. Press the SET/START pad.

At the set time, a short beep will sound. The oven will begin to bake. When the oven has reached the desired temperature, a long beep will sound 6 times and the oven lamp will fl ash.

Place food in the oven after preheating if the recipe calls for it. Preheating is important for good results when baking cakes, cookies, pastry, and breads. After the oven has reached the desired temperature, a long beep will sound 6 times.

2_ Operating the oven

BROILING

Always operate broil mode with door closed.

CAUTION

Using the broil pan

The broil pan and the insert allow grease to drain and be kept away from the high heat of the broiler.

??? Do not use the pan without the insert.

??? Do not cover the insert with foil; the exposed grease could ignite.

Should an oven fi re occur, close the oven door and turn the oven off. If the fi re continues,

CAUTION throw baking soda on the fi re or use a foam-type fi re extinguisher. Do not put water or

fl our on the fi re. Flour may be explosive and water can cause a grease fi re to spread and cause personal injury.

How to set the oven for broiling

1. Select the broil setting you want.

Press the BROIL pad once for HI or twice for LO.

Use LO to cook foods such as poultry or thick cuts of meat thoroughly without over-browning them.

2. Start the broiling function. Press the SET/START pad.

Broil on one side until food is browned; turn and cook on the other side.

. Press the CLEAR/OFF pad once you have fi nished cooking or if you want to cancel broiling.

OVEN THE OPERATING 04

Operating the oven _29

Recommended broiling guide

The size, weight, thickness, starting temperature, and your preference of doneness will affect broiling times.

This guide is based on meats at refrigerator temperature.

30_ Operating the oven

USING THE CUSTOM COOK FEATURE

By using the custom cook feature, you can record up to 3 different recipe settings. The feature may be used for baking, convection baking, or convection roasting. It will not work with any other function, including the delay start feature.

How to record a recipe setting

1. Press the pad for the cooking operation you want to store, eg. BAKE. The default temperature is 350??F.

2. Use the number pad to enter the temperature you want, eg. 375??F.

. Press the CUSTOM COOK pad the number of times corresponding to where you want to store the setting, eg. for recipe setting 2, press the CUSTOM COOK pad twice.

Recipe settings may be stored at 1, 2, or 3.

. Press the SET/START pad.

How to recall a setting

1. Press the CUSTOM COOK pad the number of times corresponding to where the recipe setting is stored, eg. for recipe setting 2, press the CUSTOM COOK pad twice.

Recipe settings may be stored at 1, 2, or 3.

2. Start the stored cooking operation. Press the SET/START pad.

OVEN THE OPERATING 04

Operating the oven _1

PROOFING

The proofi ng feature maintains a warm environment useful for rising yeast-leavened products.

How to set the oven for proofi ng

1. Enter the proofi ng mode. Press the PROOF pad.

2. Start the proofi ng function. Press the SET/START pad.

The proofi ng feature automatically provides the optimum temperature for the proof process, and therefore does not have a temperature adjustment.

. Press the CLEAR/OFF pad at any time to turn off the proofi ng feature.

???If you press the PROOF pad when the oven temperature is above 100??F, Hot will appear in the display. Because these functions produce the best results when started while

the oven is cool, we recommend that you wait until the oven has cooled down and Hot disappears from the display.

???To avoid lowering the oven temperature and lengthening proofi ng time, do not open the oven door unnecessarily.

???Check bread products early to avoid over-proofi ng.

???Do not use the proofi ng mode for warming food or keeping food hot. The proofi ng oven temperature is not hot enough to hold foods at safe temperatures. Use the keep warm feature to keep food warm.

???For best results, cover the dough with a cloth or with plastic wrap (the plastic may need to be anchored underneath the container so the oven fan will not blow it off).

2_ Operating the oven

USING THE KEEP WARM FUNCTION

The keep warm feature will maintain an oven temperature of 170??F. You should not use this feature to reheat cold foods. The keep warm feature will keep cooked food warm for serving up to 3 hours after cooking has fi nished.

After 3 hours, the feature will shut the oven off automatically. The feature may be used without any other cooking operations or may be set to activate after a timed or delay timed cooking operation.

How to use the keep warm feature

1. Press the KEEP WARM pad.

2. Press the SET/START pad.

. Press the CLEAR/OFF pad at any time to turn the feature off.

How to set the oven to activate the keep warm mode after a timed cooking

1. Press the KEEP WARM pad during a cooking operation, eg. baking.

The oven is now programmed to activate the keep warm mode automatically after completing the cooking operation.

2. Press the CLEAR/OFF pad at any time to turn the feature off.

TURNING THE OVEN LIGHT ON AND OFF

???The oven light turns on automatically when the door is opened.

???The oven light turns off automatically when the door is closed.

???You can turn the oven light on and off manually by pressing the OVEN LIGHT pad.

???The oven light will not turn on during a self-cleaning cycle.

OVEN THE OPERATING 04

Operating the oven _

EXTRA FEATURES

12 hour energy saving

With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.

How to turn 12 hour energy saving feature on or off

1. Press COOKING TIME and 0 on the number pad at the same time for 3 seconds.

The display will show 12 Hr (12 hour shut-off) or -- Hr (no shut- off).

The default is 12 Hr.

2. Press 0 on the number pad to select OFF or ON.

Pressing 0 on the number pad changes the mode between 12 Hr and -- Hr.

. Press the SET/START pad..

Fahrenheit or Celsius temperature selection

The oven control can be programmed to display temperatures in Fahrenheit or Centigrade. The oven has been preset at the factory to display in Fahrenheit.

How to change the display from Fahrenheit to Centigrade or from Centigrade to Fahrenheit

1. Press BROIL and 0 on the number pad at the same time for 3 seconds.

The display shows F (Fahrenheit) or C (Centigrade). The default is F.

2. Press 0 on the number pad to select F or C.

Pressing 0 on the number pad changes the display between F and C.

. Press the SET/START pad.

_ Operating the oven

Convection auto conversion feature

When using convection bake, the convection auto conversion feature will automatically convert entered regular baking temperatures to convection baking temperatures.

This feature is activated so that the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350??F and press the Set/Start pad, the display will show the converted temperature of 325??F.

How to disable or enable the auto conversion feature

1. Press CONV. BAKE and 0 on the number pad at the same time for 3 seconds.

The display will show Con On (enabled) or Con OFF (disabled). The default setting is Con On.

2. Press 0 on the number pad to select Con On or Con OFF.

Pressing 0 on the Number pad changes the mode between Con On and Con OFF.

. Press the SET/START pad.

Thermostat adjustment

The temperature in the oven has been preset at the factory. When fi rst using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

The oven temperature can be adjusted ??35??F (??19??C ).

How to adjust the oven temperature

1. Press BAKE and 0 on the number pad at the same time for 3 seconds.

The display will show AdJ 0.

2. Enter the adjustment you want, eg. 20??F, by using the number pad.

You can adjust the temperature to lower than the factory setting by pressing the BAKE pad.

. Press the SET/START pad.

This adjustment will not affect the broiling or the self-cleaning temperatures. The adjustment will be retained in memory after a power failure.

OVEN THE OPERATING 04

Operating the oven _5

Sound on/off

By using this feature, you can set the oven controls to operate silently.

How to turn the sound on or off

1. Press Oven Light and 0 on the number pad at the same time for 3 seconds.

The display will show Snd On (sound on) or Snd OFF (sound off). The default setting is Snd On.

2. Press 0 on the number pad to select OFF or ON.

Pressing 0 on the number pad changes the mode between Snd On and Snd OFF.

. Press the SET/START pad.

Control lockout

This feature will allow you to lock the buttons on the touch pad so they cannot be activated accidentally.

How to activate the control lockout feature

1. Press the CLEAR/OFF pad for 3 seconds.

The display will show Loc and an icon of a lock continuously and the time of day if not blacked out.

All functions must be cancelled before the control lockout is activated.

This function is available under 400??F.

How to unlock the controls

1. Press the CLEAR/OFF pad for 3 seconds.

Loc and the lock icon will disappear from the display.

_ Operating the oven

Setting the Sabbath

(For use on the Jewish Sabbath & Holidays)

The Sabbath feature can be used with baking only. The oven temperature may be set higher or lower after setting the Sabbath feature (the oven temperature adjustment feature should be

used only during Jewish holidays). The display, however, will not change and tones will not sound when a change occurs. Once the oven is properly set for baking with the Sabbath feature active, the oven will remain continuously on until cancelled. This will override the factory preset 12 hour energy saving feature. If the oven light is needed during the Sabbath, press the OVEN LIGHT pad before activating the Sabbath feature. Once the oven light is turned on and the Sabbath feature is active, the oven light will remain on until the Sabbath feature is turned off. If the oven light needs to be off, be sure to turn the oven light off before activating the Sabbath feature.

How to use the Sabbath feature

1. Press the BAKE pad.

The default temperature is 350??F.

2. Enter the temperature you want, eg. 375??F, by using the number pad.

. Press the SET/START pad.

The temperature display will start to change once the oven temperature reaches 150??F.

. Press the CLOCK AM/PM and the KITCHEN TIMER ON/OFF pads at the same time for 3 seconds.

The display will show SAb.

Once SAb appears in the display, the oven control will no longer beep or display any further changes.

You may change the oven temperature once baking has started. Remember that the oven control will no longer beep or display any further changes once the Sabbath feature.

5. You can turn the oven off at any time by pressing the CLEAR/OFF pad. This will turn only the oven off. If you want to deactivate the Sabbath feature, hold down the CLOCK AM/PM and KITCHEN TIMER ON/OFF pads at the same time for 3 seconds. Sab will disappear from the display.

It is not advised to attempt to activate any other program feature except BAKE while the Sabbath feature is active. ONLY the following key pads will function correctly with the Sabbath feature: NUMBER, BAKE, SET/START and CLEAR/OFF pad. ALL OTHER KEyPADS should not be used once the Sabbath feature is activated.

OVEN THE OPERATING 04

Operating the oven _

maintaining your appliance

SELF-CLEANING

A self-cleaning oven uses high temperatures (well above cooking temperatures) to burn off leftover grease and residue completely or reduce them to a fi nely powdered ash that you can wipe away with a damp cloth.

???The health of some birds is extremely sensitive to the fumes given off during the self- cleaning cycle of any range. Move birds to another well-ventilated room.

???Do not line the oven walls, racks, bottom or any other part of the range with aluminum foil. Doing so will result in poor heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven).

???Do not force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the self-cleaning cycle is complete. Stand to the side of the oven when opening the door to allow hot air or steam to escape. The oven may still be VERy HOT.

Before a self-cleaning cycle

???The silver-colored oven racks can be self-cleaned, but they will darken, lose their luster and become hard to slide.

The health of some birds is extremely sensitive to the fumes given off during the self- cleaning cycle of any range. Move birds to another well ventilated room.

_ Maintaining your appliance

How to set the oven for self-cleaning

1. Select the length of time for the self-cleaning operation, eg. 3 hours.

Press the SELF CLEAN pad once for a 3 hour clean time, twice for a 4 hour clean time, or 3 times for a 2 hour clean time.

The default setting is 3 hours.

2. Start the self-cleaning cycle.

Press the SET/START pad. The motor-driven door lock will engage automatically.

???You will not be able to start a self-cleaning cycle if the control lockout feature is activated or if the oven???s temperature is too hot.

???The oven door locks automatically. The display will show the clean time remaining. It is not be possible to open the oven door until the temperature drops to a safe/cool temperature.

???The self-cleaning feature will not operate when a surface element is on. If a surface element gets turned on during a self-cleaning cycle, the cycle will turn off automatically.

How to delay the start of self-cleaning

1. Press the SELF CLEAN pad.

Select the desired self-clean time by pressing SELF CLEAN pad. 2. Press the DELAy START pad.

. Using the CLOCK AM/PM and number pads, enter the time you want the clean cycle to start.

. Press the SET/START pad.

The display will show Delay, Self clean and Lock icon. And the motor-driven door lock will engage automatically.

5. Self-Cleaning cycle will turn on automatically at the set time.

How to turn off the self-cleaning feature

You may fi nd it necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fi re in the oven. (When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times.)

1. Press the CLEAR/OFF pad.

2. You will be able to open the oven door once the oven has cooled down for approximately 1 hour.

After a self-cleaning cycle

???You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. (If white spots remain, remove them with a soap-fi lled steel wool pad and rinse thoroughly with a vinegar and water mixture.)

???If the oven is not clean after one cycle, repeat the cycle.

???You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

APPLIANCE YOUR MAINTAINING 05

Maintaining your appliance _9

STEAM-CLEANING

How to set the oven for steam-cleaning

Steam-cleaning saves time and energy for light cleaning. For heavier-duty cleaning of debris and grease, use the self-cleaning function.

1. Remove all accessories from the oven.

2. Pour approximately 10 oz. (300 ml) of water onto the bottom of the empty oven and close the oven door.

Use normal water only, no distilled water.

. Press the STEAM CLEAN pad.

. Press the SET/START pad.

When the operation is complete, the display will blink and a beep will sound.

5. Press the CLEAR/OFF pad. . Clean the oven???s interior.

There will be a signifi cant amount of water remaining on the bottom of the oven after a steam-cleaning cycle. Remove the residual water with a sponge or soft dry cloth.

When steam-cleaning, use exactly 10 oz. of water since this produces the best results.

If you press the STEAM CLEAN pad when the oven temperature is above 100??F, Hot will appear in the display. Because these functions produce the best results when started while the oven is cool, we recommend that you wait until the oven has cooled down and Hot disappears from the display.

After a steam-cleaning cycle

???Take care when opening the door before a steam-cleaning procedure has ended; the water on the bottom is hot.

???Open the oven door and remove the remaining water with a sponge. Do not leave the residual water in the oven for any length of time. Wipe the oven clean and dry with a soft cloth (do not forget to wipe under the oven door seal).

???Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven interior. Remove stubborn residue with a nylon scourer. You can remove lime deposits with a cloth soaked in vinegar.

???If the oven remains dirty, you can repeat the procedure once the oven has cooled.

???For heavy residue, such as grease left over from roasting, we recommend that you rub detergent into the residue before activating the steam-cleaning function.

???After cleaning, leave the oven door ajar at a 15?? angle to allow the interior enamel surface to dry thoroughly.

0_ Maintaining your appliance

CARE AND CLEANING OF THE OVEN

WARNING

??? Be sure all controls are OFF and all surfaces are COOL before cleaning any part of the range.

???If your range is removed for cleaning, servicing or any reason, be sure the Anti-Tip device is re-engaged

properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury.

Oven vent

Cleaning painted parts and decorative trim

???For general cleaning, use a cloth with hot and soapy water.

???For more diffi cult residue and built-up grease, apply a liquid detergent directly onto the area and leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do not use abrasive cleaners on any of these surfaces; they can scratch.

Cleaning stainless steel surfaces

1.Shake the bottle of Stainless Steel Appliance Cleaner or polish well.

2.Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or damp paper towel.

3.Clean a small area, rubbing with the grain of the stainless steel if applicable.

4.Dry and buff with a clean, dry paper towel or soft cloth.

5.Repeat as necessary.

???Do not use a steel-wool pad; it will scratch the surface.

???If a mineral oil-based stainless steel appliance cleaner has been used before to clean the appliance, wash the surface with dishwashing liquid and water prior to using the Stainless Steel Appliance Cleaner or polish.

APPLIANCE YOUR MAINTAINING 05

Maintaining your appliance _1

Cleaning the broil pan and insert

??? Do not attempt to clean the broil pan or insert by leaving it in the oven during a self-cleaning cycle.

??? After broiling, remove the broil pan from the oven. Remove the insert from the pan. Carefully pour out the grease from the pan into a proper container.

??? Wash and rinse the broil pan and grid in hot water with a soap-filled scouring pad.

??? Soaking the pan will remove burned-on foods.

??? Both the broil pan and insert may be cleaned with a commercial oven cleaner and are dishwasher-safe.

???Do not store a soiled broil pan and insert anywhere in the range.

Oven racks

???If the racks are left in the oven during a self-cleaning cycle, their color will turn slightly blue and the fi nish will be dull. After the self-cleaning cycle is complete and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of oil. This will help the racks glide more easily into their tracks.

Oven door

on???t hand ean the

oven door gasket.

You may

hand clean the oven door.

???Use soap & water to thoroughly clean the top, sides, and front of the oven door. Rinse well. You may use a glass cleaner on the outside glass of the oven door. DO NOT immerse the door in water. DO NOT spray or allow water or the glass cleaner to enter the door vents. DO NOT use oven cleaners, cleaning powders, or any harsh abrasive cleaning materials on the outside of the oven door.

???DO NOT clean the oven door gasket. The oven door gasket is made of a woven material which is essential for a good seal. Care should be taken not to rub, damage or remove this gasket.

2_ Maintaining your appliance

CARE AND CLEANING OF THE GLASS COOKTOP

Normal daily use cleaning

Use only a ceramic cooktop cleaner or the cleaner supplied with this appliance on the glass cooktop. Other creams may not be as effective.

By following these steps, you can maintain and protect the surface of your glass cooktop.

1.Before using the cooktop for the fi rst time, clean it with a ceramic cooktop cleaner or the included cleaner. This helps protect the top and makes cleanup easier.

2.Daily use of a ceramic cooktop cleaner or the included cleaner will help keep the cooktop looking new.

3.Shake the cleaning cream well. Apply a few drops of cleaner directly to the cooktop.

4.Use a paper towel or a cleaning pad for ceramic cooktops to clean the entire cooktop surface.

5.Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.

DAMAGE to your glass surface may occur if you use scrub pads other than those WARNING recommended.

Removing burned-on residue

1. Allow the cooktop to cool.

2. Spread a few drops of ceramic cooktop cleaner on the entire burned residue area.

. Using the included cleaning pad for ceramic cooktops, rub the residue area, applying pressure as needed.

. If any residue remains, repeat the steps listed above as needed.

5. For additional protection, after all residue has been removed, polish the entire surface with ceramic cooktop cleaner and a paper towel.

Removing heavy, burned-on residue

1. Allow the cooktop to cool.

2. Use the single-edge razor-blade scraper at approximately a 45?? angle against the glass surface and scrape the soil. It will be necessary to apply pressure in order to remove the residue.

. After scraping with the razor scraper, spread a few drops of ceramic cooktop cleaner on the entire burned residue area. Use the included cleaning pad to remove any remaining residue. (Do not scrape the seal.)

. For additional protection, after all residue has been removed, polish the entire surface with the included cooktop cleaner and a paper towel.

APPLIANCE YOUR MAINTAINING 05

Maintaining your appliance _

Removing metal marks and scratches

1.Be careful not to slide pots and pans across your cooktop. It will leave marks on the cooktop surface. You can remove these marks by applying ceramic cooktop cleaner or the included cleaner with a cleaning pad for ceramic cooktops.

2.If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. You should remove this discoloration immediately or it may become permanent.

Carefully check the bottoms of pans for roughness that may scratch the cooktop.

WARNING

Cleaning the cooktop seal

To clean the seal around the edges of the glass, lay a wet cloth on it for a few minutes, then wipe clean with a nonabrasive cleaner.

Potential for permanent damage to the glass surface

???Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your cooktop. This is not covered under the warranty. You should clean the spill while it is still hot. Take special care when removing hot substances. Refer to the following section.

???When using a scraper, be sure it is new and the razor blade is still sharp; do not use a dull or nicked blade.

Cleaning sugary spills and melted plastic

1.Turn off all surface units. Remove hot pans.

2.Wearing an oven mitt, use a single-edge razor-blade scraper to move the spill to a cool area of the cooktop. Remove the spill with paper towels.

3.Any remaining spillover should be left until the surface of the cooktop has cooled.

4.Don???t use the surface units again until all of the residue has been completely removed.

If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary.

_ Maintaining your appliance

REMOVING AND REPLACING THE OVEN DOOR

How to remove the door

CAUTION

??? The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle.

??? Turn the power OFF before removing the door.

1.Open the door completely.

2.Pull the hinge locks down toward the door frame to the unlocked position.

Hinge lock

3.Firmly grasp both sides of the door at the top.

4.Close the door to the door removal position, which is approximately 5 degrees from vertical (Fig. 1).

5.Lift door up and out until the hinge arm is clear of the slot (Fig. 2).

about 5??

How to replace the door

1.Firmly grasp both sides of the door at the top.

2.With the door at the same angle as the removal position, slide the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into the bottom of the slot.

APPLIANCE YOUR MAINTAINING 05

Bottom edge of slot

Maintaining your appliance _5

3.Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the bottom edge of the slot.

4.Push the hinge locks up against the front frame of the oven cavity to the locked position.

Hinge lock

5. Close the oven door.

REMOVING AND REPLACING THE WARMING DRAWER

Turn the power OFF before removing the warming drawer.

CAUTION

How to remove the warming drawer

1.Open the drawer to the fully opened position.

2.Locate the glide lever on each side of the drawer; push down on the left glide lever and pull up on the right glide lever.

3. Pull the warming drawer away from the range.

How to replace the warming drawer

1.Replace the shield on the right glide of the drawer body.

2.Pull the bearing glides to the front of the chassis glide.

3.Align the glide on each side of the drawer with the glide slots on the range.

4.Push the drawer into the range until levers click (approximately 2 inches). Pull the drawer open again to seat bearing glides into position. If you do not hear the levers click or the bearing glides do not feel seated, remove the drawer and repeat steps 1-This will minimize possible damage to the bearing glides.

_ Maintaining your appliance

CHANGING THE OVEN LIGHT

The oven light is a standard 40-watt appliance bulb. It will come on when the oven door is open. When the oven door is closed, press the OVEN LIGHT pad to turn it on or off. It will not work during a self-cleaning cycle.

1.Make sure the oven and the bulb are cool.

2.Unplug the range or disconnect power.

3.Turn the glass bulb cover in the back of the oven counterclockwise to remove.

4.Turn the bulb counterclockwise to remove it from its socket.

Remove Replace

5.Replace the light bulb and glass bulb cover by turning them clockwise.

6.Plug in the range or reconnect power.

Before changing your oven light bulb, disconnect the electrical power to the range at the CAUTION main fuse or circuit breaker panel. Make sure the oven and the bulb are cool.

APPLIANCE YOUR MAINTAINING 05

Maintaining your appliance _

troubleshooting

Troubleshooting

Samsung works hard to ensure that you don???t have problems with your new electric range. If you run into unexpected trouble, look first for a solution in the table below. If, after trying the suggested solution, you???re still having trouble, call Samsung at 1-800-SAMSUNG (1-800-726-7864).

The surface unit This is normal. The unit is still on and hot. stops glowing when

changed to a lower setting.

48_ Troubleshooting

Troubleshooting _49

50_ Troubleshooting

Troubleshooting _51

warranty

PLEASE DO NOT DISCARD THIS REPLACES THE WARRANTY PAGE IN THE USE & CARE GUIDE

SAMSUNG ELECTRIC RANGE

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) Year Parts and Labor, Five (5) Years Parts Warranty

For Glass Cooktop and Radiant Surface Unit

During this limited additional four-year warranty, you will responsible for any labor or in-home service.

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center, and any unauthorized service will void this warranty. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG???s authorized service center. Samsung will provide in-home service during the one (1) year warranty period at no charge subject to availability within Canada. In home service is not available in all areas. To receive in home service product must be unobstructed and accessible to the service agent. If service is not available Samsung may elect to provide transportation of the product to and from an authorized service center.

SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.

This limited warranty shall not cover cases of incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. Furthermore, damage to the glass cooktop caused by the use of cleaners other than the recommended cleaners and pads, damage to the glass cook top caused by hardened spills of sugary materials or melted plastic that are not cleaned according to the directions in the use and care guide are not covered. SAMSUNG does not warrant uninterrupted or error-free operation of the product.

EXCEPT AS SET FORTH HEREIN THERE ARE NO WARRANTIES OR CONDITIONS ON THIS PRODUCT EITHER EXPRESS OR

IMPLIED AND SAMSUNG DISCLAIMS ALL WARRANTIES AND CONDITIONS INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTIES AND CONDITIONS OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO

WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE

BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS

OR OTHER BENEFITS, OR ANY OTHER GENERAL, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED

BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS

BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF

ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG

AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY

FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER???S PROPERTY AND TO OTHERS AND THEIR PROPERTY

ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO

ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE

REMEDY.

Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction.

To obtain warranty service, please contact SAMSUNG at:

SAMSUNG ELECTRONICS CANADA INC.,

55 STANDISH COURT MISSISSAUGA ONTARIO, L5R 4B2 1-800-SAMSUNG (726-7864) and www.samsung.com/ca

52_ Warranty

QUESTIONS OR COMMENTS?

DG68-00106A