Welcome to Sprint

Sprint is committed to bringing you the best wireless

technology available. We built our complete, nationwide network from the ground up, so all your services ??? whether it???s Voicemail, Caller ID, email, or Sprint PCS?? Picture Mail ??? will work the same wherever you go on the Nationwide Sprint PCS Network.

This guide will familiarize you with our technology and your new phone through simple, easy-to-follow instructions. It???s all right here ??? from setting up your account passwords and voicemail to using the most advanced features of your phone.

Welcome and thank you for choosing Sprint.

i

Introduction

This Phone Guide introduces you to Sprint PCS Service and all the features of your new phone. It???s divided into four sections:

???Section 1: Getting Started

???Section 2: Your Phone

???Section 3: Sprint PCS Service Features

???Section 4: Safety and Warranty Information

Throughout this guide, you'll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service. The Table of Contents and Index will also help you quickly locate specific information.

You'll get the most out of your phone if you read each section. However, if you'd like to get right to a specific feature, simply locate that section in the Table of Contents and go directly to that page. Follow the instructions in that section, and you'll be ready to use your phone in no time.

WARNING Please refer to the Important Safety Information section on page 131 to learn about information that will help you safely use your phone. Failure to read and follow the Important Safety Information in this phone guide may result in serious bodily injury, death, or property damage.

ii

Your Phone???s Menu

The following list outlines your phone???s menu structure. For more information about navigating through the menus, please see ???Navigating Through Phone Menus??? on page 24.

CONTACTS (RIGHT SOFTKEY)

VOICE KIT (LEFT SOFTKEY)

PRESS MENU TO DISPLAY THE FOLLOWING:

VOICE KIT

1: Voice Dial

MESSAGING

1:Send Message

2:Inbox

3:Outbox

4:Drafts

5:Voicemail

3:Clear Envelope

6:Settings

1:Notification

2: Sending Options

iii

iv

8:Calculator

9:Set Time (displayed when there is no time information)

SETTINGS

1: Display

1: Screen Saver

1: Color

4:Hyphenate

2:Size

4:Greeting (Sprint/Custom)

5:Backlight

1: Main Display

4:8 seconds

2:Keypad

3:Pwr Save Mode (On/Off)

4:Brightness

1:Lowest/Low/Med/High/Highest

6:Service Light (On/Off)

2:Sounds

v

1: Ringer Type

1: Voice Calls

1: With Caller ID

vi

3: Tone Length (Short/Long)

3: Security

1: Lock Phone

vii

4: Right Key

1: Abbrev. Dial (On/Off)

2: Contacts Match (On/Off)

3: Restriction

1: Outgoing Call (Allow all / Contacts Only / Special# Only)

4: Call Answer

CALL HISTORY

1: Outgoing Calls

2: Incoming Calls

3: Missed Calls

viii

4: All Recent

CONTACTS

1: Find

2: Add New Entry

3: Speed Dial #s

4: Group

Press Options (right softkey) to display the following options:

ix

Getting Started With Sprint PCS Service

Determining if Your Phone is Already Activated

If you purchased your phone at a Sprint Store, it is probably activated, unlocked, and ready to use. If you received your phone in the mail, it probably has been activated; all you need to do is unlock it.

If your phone is not activated, please refer to the activation card included with your phone.

Unlocking Your Phone

To unlock your phone, follow these easy steps:

1.Press to turn the phone on.

2.Press Unlock ().

Note: To select a softkey, press the softkey button directly below the softkey text that appears at the bottom left and bottom right of your phone???s display screen. Softkey actions change according to the screen you???re viewing and will not appear if there is no corresponding action available.

3.Enter your four-digit lock code. (For security purposes, the code is not visible as you type.)

Tip: If you can???t recall your lock code, try using the last four digits of either your Social Security number or wireless phone number or try 0000 or NATL (6285). If none of these work, call Sprint Customer Service at 1-888-211-4PCS (4727).

4Section 1A: Setting Up Service

Sprint PCS Account Passwords

As a Sprint PCS customer, you enjoy unlimited access to your personal account information and your voicemail account. To ensure that no one else has access to your information, you will need to create passwords to protect your privacy.

Account Password

If you are the account owner, you'll have an account password to sign on to www.sprint.com and to use when calling Sprint Customer Service. Your default account password is the last four digits of your Social Security number. If you are not the account owner (if someone else receives the invoice for your Sprint PCS Service), you can get a sub-account password at www.sprint.com.

Voicemail Password

You'll create your voicemail password (or passcode) when you set up your voicemail. See ???Setting Up Your Voicemail??? on page 100 for more information on your voicemail password.

6Section 1A: Setting Up Service

Receiving Automated Invoicing Information

For your convenience, your phone gives you access to invoicing information on your Sprint PCS account. This information includes balance due, payment received, invoicing cycle, and an estimate of the number of minutes used since your last invoicing cycle.

To access automated invoicing information:

???Press .

Note: This service may not be available in all Affiliate areas.

Sprint 411

You have access to a variety of services and information through Sprint 411, including residential, business, and government listings; movie listings or showtimes; driving directions, restaurant reservations, and major local event information. You can get up to three pieces of information per call, and the operator can automatically connect your call at no additional charge.

There is a per-call charge to use Sprint 411 and you will be billed for airtime.

To call Sprint 411:

???Press .

8Section 1A: Setting Up Service

Section 2A

Your Phone: The Basics

Front View of Your Phone

14 Section 2A: Your Phone: The Basics

Key Functions

9.Shift/Asterisk Key enters the asterisk [*] character for calling features. In text entry mode, press to change the capitalization mode.

10.Plus Code Dialing Key automatically dials the international access code for the country in which you are located (for instance, 011 for international calls placed from the United States).

11.Power/Accessory Interface Connector allows you to connect charging accessories and optional accessory cables to your phone.

12.Microphone allows other callers to hear you clearly when you are speaking to them.

13.Space/Pound Key enters the pound [#] character for calling features. In text entry mode, press to enter a space.

14.Numeric Keypad allows you to enter numbers, letters, and characters.

15.BACK Key (Clear) deletes characters from the display in text entry mode. When in a menu, press the Back key to return to the previous menu.

16.Speaker Key turns on or off the speaker phone.

17.END Key (Power) ends a call. Press and hold this key for two seconds to turn your phone on or off. While in the main menu, it returns the phone to standby mode and cancels your input. When you receive an incoming call, press to enter silent mode and mute the ringer.

18.OK/Menu Key allows you to access the menu screen. It also allows you to accept choices when navigating through a menu.

19.Right Softkey allows you to select softkey actions or menu items corresponding to the bottom right line on the display screen.

16 Section 2A: Your Phone: The Basics

Turning Your Phone On and Off

Turning Your Phone On

To turn your phone on:

???Press and release .

Once your phone is on, it may display ???Searching for Service,??? which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode ??? the phone???s idle state. At this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.

In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for Sprint PCS Service by pressing any key (when your phone is turned on).

Note: The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.

Turning Your Phone Off

To turn your phone off:

???Press and hold for two seconds until you see the powering down animation on the display screen.

Your screen remains blank while your phone is off (unless the battery is charging).

20 Section 2A: Your Phone: The Basics

Installing the Battery

To install the Li-Ion battery:

1.Insert the battery into the opening on the back of the phone at a 45-degree angle, making sure to line up the gold contacts. Gently press down until it snaps into place.

2.Install the protective cover by lining up the tabs at a and gently press up until the cover snaps into place.

Removing the Battery

To remove your battery:

1.Remove the protective cover by pressing down on the back of the cover.

2.Grip the battery at the bottom and pull up and out at a 45-degree angle.

22 Section 2A: Your Phone: The Basics

Navigating Through Phone Menus

The navigation key on your phone allows you to scroll through menus quickly and easily. The scroll bar at the right of the menu keeps track of your position in the menu at all times.

To navigate through a menu, simply press the navigation key up or down. If you are in a first-level menu, such as Settings, you may also navigate to the next or previous first-level menu by pressing the navigation key right or left.

For a diagram of your phone???s menu, please see ???Your Phone???s Menu??? on page iii.

Selecting Menu Items

As you navigate through the menu, menu options are highlighted. Select any numbered option by simply pressing the corresponding number on the phone???s keypad. You may also select any item by highlighting it and pressing .

For example, if you want to view your last incoming call:

1.Select Menu ( ) to access the main menu.

2.Select Call History by pressing or by highlighting it and pressing .

3.Select Incoming Calls by pressing or by highlighting it and pressing . (If you have received any calls, they are displayed on the screen.)

Note: For the purposes of this guide, the above steps condense into ???Select Menu > Call History > Incoming Calls.???

24 Section 2A: Your Phone: The Basics

Making and Answering Calls

Holding Your Phone

Since the antenna has been integrated into the design of the phone, it is important not to block the reception path accidentally to ensure the strongest signal possible is achieved. The orbital internal antenna is located near the hinge of your handset.

ATTENTION

Obstructing the internal antenna could inhibit call performance.

26 Section 2A: Your Phone: The Basics

Making Calls

Placing a call from your phone is as easy as making a call from any landline phone. Just enter the number, press , and you???re on your way to clear calls.

To make a call using your keypad:

You can also place calls from your phone by using the Contacts menu (page 81), Sprint PCS?? Voice Command (page 123), speed dialing numbers from your Contacts (page 37), and using your Call History listings (page 75).

Dialing Options

When you enter numbers in standby mode, select Options ( ) to see the following dialing options.

To initiate an option, press the corresponding softkey button.

???Dial dials the number or digits displayed.

???Send Msg allows you to send text messages to the number being dialed.

???Save allows you to enter a seven- or ten-digit number (phone number and area code) and press Options (right softkey) > Save to save the phone number in your Contacts. (See ???Saving a Phone Number??? on page 33.)

???Find allows you to enter a digit or string of digits, press Options (right softkey), and then press Search to display Contacts entries that contain the entered numbers. (See ???Finding a Phone Number??? on page 34.)

???Hard Pause allows you to enter a hard pause. To continue dialing, you must press a key. (See ???Dialing and Saving Phone Numbers With Pauses??? on page 35.)

???2sec Pause allows you to enter a two-second pause. The phone will pause and then continue dialing without any additional keys being pressed. (See ???Dialing and Saving Phone Numbers With Pauses??? on page 35.)

28 Section 2A: Your Phone: The Basics

Answering a Roam Call With Call Guard Enabled

Call Guard is an option that helps you manage your roaming charges when making or receiving calls while outside the Nationwide Sprint PCS Network. Please see Section 2D: Controlling Your Roaming Experience for more information about roaming.

To answer a call when you are roaming and Call Guard is enabled:

???Select Answer to answer the call. (See ???Using Call Guard??? on page 72 for additional information.)

Note: When your phone is off, incoming calls go directly to voicemail.

Ending a Call

To disconnect a call when you are finished:

???Close the phone or press .

Missed Call Notification

When an incoming call is not answered, the Missed Call log is displayed on your screen.

To display the Missed Call entry from the notification screen:

???Highlight the entry and press . (To dial the phone number, press .)

To display a Missed Call entry from standby mode:

1.Select Menu > Call History > Missed Calls.

2.Highlight the entry you wish to view and press .

30 Section 2A: Your Phone: The Basics

In-Call Options

Pressing Options (right softkey) during a call displays a list of features you may use during the course of a call. To select an option, press the corresponding keypad number or highlight the option and press . The following options are available through the Options menu:

Warning! Due to higher volume levels, do not place the phone near your ear during monitor use.

???Call History checks your call log for Outgoing, Incoming, Missed, and Recent calls. You can also erase the logs from this menu.

???Contacts accesses the Contacts menu.

???3-Way Call allows you to talk to two different people at the same time. (For more information, see ???Making a Three-Way Call??? on page 113.)

???Messaging accesses the Messaging menu options.

???Voice Memo allows you to record incoming audio from your conversation. (For more information, see ???Managing Voice Memos??? on page 120.)

???Tools accesses the Tools menu options.

???Phone Info displays the following menu options:

???Phone Number

???Icon Glossary

???Version

???Advanced

During a call, the left softkey button functions as the Mute button. Press it to mute the phone???s microphone for privacy. Press it again to Unmute the phone.

32 Section 2A: Your Phone: The Basics

4.Enter a name for the entry using the numeric keys. Press

to select the desired entry method T9(English), Alpha, Symbol, or Number. (See ???Entering Text??? on page 38.)

5.When you have finished entering the name, press to return to the contact entry.

6.Press for Done to save the entry.

Finding a Phone Number

You can search Contacts entries for phone numbers that contain a specific string of numbers.

To find a phone number:

1.While in standby mode, enter three or more of the last digits of the phone number. (The more numbers you enter, the more specific the search becomes.)

2.Press Options () and select Find. (All Contacts entries matching the entered numbers will be displayed.)

3.To display the Contacts entry that contains the phone number you entered, highlight the entry and press . To dial the number, press .

34 Section 2A: Your Phone: The Basics

Plus (+) Code Dialing

When placing international calls, you can use Plus Code Dialing to automatically enter the international access code for your location (for example, 011 for international calls placed from the United States).

To make a call using Plus Code Dialing:

1.Press and hold until a ???+??? appears on your phone display.

2.Dial the country code and phone number you???re calling and press . (The access code for international dialing will automatically be dialed, followed by the country code and phone number.)

Dialing From the Contacts List

To dial directly from a Contacts entry:

36 Section 2A: Your Phone: The Basics

Entering Text

Selecting a Character Input Mode

Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or SMS Text Messaging).

To change the character input mode:

1.When you display a screen where you can enter text, press the right softkey to change the character input mode.

2.Select one of the following options:

???T9(English) to enter text using a predictive text entering system that reduces the number of keys that need to be pressed while entering a word (see page 39).

???Alpha to cycle through the alpha characters associated with the letters on the keypad (see page 40).

???Symbol to enter symbols (see page 41).

???Number to enter numbers by pressing the numbers on the keypad (see page 41).

???Preset Msg to enter preprogrammed messages (see page 41).

???Recent Msg to enter a message from a list of previous messages.

???Emoticons to enter ???emoticons??? (see page 41).

Tip: When entering text, press the * (Shift) key to change letter capitalization (Abc > ABC > abc).

38 Section 2A: Your Phone: The Basics

Entering Characters by Tapping the Keypad

To enter characters by tapping the keypad:

1.Select the Alpha mode. (See ???Selecting a Character Input Mode??? on page 38.)

2.Press the corresponding keys repeatedly until the

desired letter appears. (For example, to enter the word

???Bill,??? press twice, three times, three times, and three times again.) (If you make a

mistake, press to erase a single character. Press and hold to delete an entire entry.)

By default, the first letter of an entry is capitalized and the following letters are lower cased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.

Characters scroll in the following order:

40 Section 2A: Your Phone: The Basics

Section 2B

Controlling Your Phone???s Settings

Sound Settings

Ringer Types

Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages.

???Preprogrammed Ringers include a variety of standard ringer types and familiar music.

???Vibrating Ringer alerts you to calls or messages without disturbing others.

Selecting Ringer Types for Voice Calls

Your phone provides a variety of ringer options that allow you to customize your ring and volume settings. These options allow you to identify incoming calls by the ring.

To select a ringer type for voice calls:

1.Select Menu > Settings > Sounds > Ringer Type > Voice Calls.

2.Select With Caller ID or No Caller ID.

3.Select Single Tones, Ring Tones or Melodies, and press

. (The list of ringers is displayed.)

4.Use your navigation key to scroll through the available ringers. A sample ringer will sound as you highlight each option.

5.Press .

44 Section 2B: Controlling Your Phone???s Settings

Selecting Ringer Types for Roam Ringer

To select a ringer type for roam ringer:

1.Select Menu > Settings > Sounds > Ringer Type > Roam Ringer.

2.Select Normal or Distinctive and press .

Selecting a Key Tone

Your phone offers a number of options for selecting the audible tones accompanying a keypress. (Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems.)

To select a key tone:

1.Select Menu > Settings > Sounds > Key Tone.

2.Select Tone Type and press .

3.Select Xylophone, DTMF, or Simple and press .

Tone Level

Your phone allows you to set the desired volume level of the key tones.

To set the key tone level:

1.Select Menu > Settings > Sounds > Key Tone > Tone Level.

2.Press left or right until you hear the desired tone level and press .

46 Section 2B: Controlling Your Phone???s Settings

Adjusting the Phone???s Volume Settings

You can adjust your phone???s volume settings to suit your needs and your environment.

To adjust your phone???s volume settings:

1.Select Menu > Settings > Sounds > Volume.

2.Select Messages, Voicemail or Alarms, and press .

3.Select Use Ringer Volume to use the ringer settings or select Separate Volume.

4.Use the navigation key to choose a volume level and select Done ( ). (Select Vibrate to make the ringer vibrate at any volume level.)

Alert Notification

Your phone can alert you with an audible tone when you change service areas, once a minute during a voice call, when the signal fades, when powering your phone on or off, or when a call has been connected.

To enable or disable alert sounds:

1.Select Menu > Settings > Sounds > Alerts.

2.Select Minute Beep, Service, Connect, Sig. Fade Tone, or Power On/Off and press .

Note: If Power On/Off is selected, choose On or Off and press OK.

3. Select On or Off and press .

48 Section 2B: Controlling Your Phone???s Settings

Changing the Backlight Time Length

The backlight setting lets you select how long the display screen and keypad are backlit after any keypress is made.

To change the backlight setting:

1.Select Menu > Settings > Display > Backlight > Main Display.

2.Select a time setting and press .

To change the keypad setting:

1.Select Menu > Settings > Display > Backlight > Keypad.

2.Select a time setting and press .

Note: Long backlight settings affect the battery???s talk and standby times.

Changing the Display Screen

Your new phone offers options for what you see on the display screen and when in standby mode.

To change the display images on main LCD:

1.Select Menu > Settings > Display > Screen Saver.

2.Choose the desired image and press to assign it as a screen saver.

50 Section 2B: Controlling Your Phone???s Settings

Changing the Dialing Font

This setting allows you to adjust the display appearance when dialing phone numbers.

To change the dialing font:

1.Select Menu > Settings > Display > Dialing Font > Size.

2.Select Large, Normal, or Small and press .

Location Settings

Your phone is equipped with a Location feature for use in connection with location-based services that may be available in the future.

The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except 911.

Note: Turning Location on will allow the network to detect your position using GPS technology, making some Sprint PCS applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.

52 Section 2B: Controlling Your Phone???s Settings

Deleting Old Messages

You can delete messages that you???ve already read whenever you like, or you can have your phone delete them automatically for you when your phone's message memory becomes full.

To automatically delete read messages:

1.Select Menu > Messaging > Settings > Auto Erase.

2.Select Yes or No and press .

Adding a Customized Signature

Each message you send can have a customized signature to reflect your personality.

To add a customized signature to each sent message:

1.Select Menu > Messaging > Settings > Edit Signature.

2.Select On and press . (If you do not wish to attach a signature to your outgoing messages, select Off and press .)

3.Enter your signature and press Done (). (See ???Entering Text??? on page 38.)

Managing Preset Messages

Your phone is programmed with 10 preset messages to help make sending text messages faster and easier. These messages, such as ???Where are you?,??? ???Let???s get lunch,??? and ???Meet me at,??? can be customized or deleted to suit your needs. You can even add your own preset messages to the list (up to 20 messages total).

54 Section 2B: Controlling Your Phone???s Settings

Airplane Mode

Airplane Mode allows you to use many of your phone???s features, such as Memo Pad and Voice Memos when you are in an airplane or in any other area where making or receiving calls or data is prohibited. When your phone is in Airplane Mode, it cannot send or receive any calls or access online information.

To set your phone to Airplane Mode:

1.Select Menu > Settings > Others > Airplane Mode.

2.Read the disclaimer and press .

3.Select On or Off and press .

While in Airplane Mode, your phone???s standby screen will display ???Phone off.???

TTY Use With Sprint PCS Service

A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities, to communicate by telephone.

Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission. Your phone and TTY device will connect via a special cable that plugs into your phone's headset jack. If this cable was not provided with your TTY device, contact your TTY device manufacturer to purchase the connector cable.

When establishing your Sprint PCS Service, please call Sprint Customer Service via the state Telecommunications Relay

56 Section 2B: Controlling Your Phone???s Settings

Phone Setup Options

Display Language

You can choose to display your phone???s onscreen menus in English or in Spanish.

To assign a language for the phone???s display:

1.Select Menu > Settings > Others > Language.

2.Select English or Espa??ol and press .

Call Setup Options

Call Setup options allow you to set up the following options:

???Abbreviated Dial allows you to program a five- or six-digit prefix for commonly used phone numbers (page 59).

???Contacts Match allows you to turn on or off the contacts matching feature (page 60).

???Restriction allows you to restrict outgoing calls (page 60).

???Call Answer allows you to set up how you answer incoming calls (page 61).

???Auto Answer allows you to answer incoming calls automatically with the optional hands-free car kit (page 61).

58 Section 2B: Controlling Your Phone???s Settings

Contacts Match

With the Contacts Match feature, your phone displays the contact???s name and phone number if the incoming call or outgoing call is in your Contacts list.

To access Contacts Match:

1.Select Menu > Settings > Others > Call Setup > Contacts Match.

2.Select On or Off and press .

Restriction

Allows you to restrict outgoing call options by selecting one of the following options:

???Allow all to allow outgoing calls to be made (no restrictions).

???Contacts Only to allow outgoing calls to only those numbers saved in the Contacts list.

???Special# Only to allow outgoing calls to only the numbers set up in the special numbers list. (See ???Using Special Numbers??? on page 66.)

To access call restriction:

1.Select Menu > Settings > Others > Call Setup > Restriction.

2.Enter your lock code.

3.Select Outgoing Call and press .

4.Select Allow all, Contacts Only, or Special# Only and press .

60 Section 2B: Controlling Your Phone???s Settings

Call Answer Mode

You can determine how to answer incoming calls on your phone, whether by pressing , by pressing any number key, or simply by opening the phone.

To set call answer mode:

opened.

Auto Answer Mode

You may set your phone to automatically pick up incoming calls when connected to an optional hands-free car kit.

To set Auto Answer mode:

1.Select Menu > Settings > Others > Call Setup > Auto Answer.

2. To select an option, highlight it and press .

???CarKit/Headset select Yes to answer calls automatically when the phone is connected to a hands-free car kit or a headset (sold separately). Remember, your phone will answer calls in Auto Answer mode even if you are not present.

Section 2C

Setting Your Phone???s Security

Accessing the Security Menu

All of your phone???s security settings are available through the Security menu. You must enter your lock code to view the Security menu.

To access the Security menu:

1.Select Menu > Settings > Security.

2.Enter your lock code to display the Security menu.

Tip: If you can???t recall your lock code, try using the last four digits of either your Social Security number or wireless phone number or try 0000 or NATL (6285). If none of these work, call Sprint Customer Service at 1-888-211-4PCS (4727).

Using Your Phone???s Lock Feature

Locking Your Phone

When your phone is locked, you can only receive incoming calls or make calls to 911, Sprint Customer Service, or special numbers. (See ???Using Special Numbers??? on page 66.)

To lock your phone:

1.From the Security menu, select Lock Phone.

2.Highlight Lock Now and press . (To set your phone to lock the next time it is turned on, select On Power-up and press .)

64 Section 2C: Setting Your Phone???s Security

Using Special Numbers

Special numbers are important numbers that you have designated as being ???always available.??? You can call and receive calls from special numbers even if your phone is locked.

You can save up to three special numbers in addition to your Contacts entries. (The same number may be in both directories.)

To add or replace a special number:

1.Select Menu > Settings > Security.

2.Enter your lock code. (The Security menu is displayed.)

3.Select Special #.

4.Select a location for your entry and press .

5.Enter the number and press .

Note: There are no speed dial options associated with special numbers.

66 Section 2C: Setting Your Phone???s Security

Section 2D

Controlling Your Roaming Experience

Understanding Roaming

Recognizing the Roaming Icon on the Display Screen

Your phone???s display screen always lets you know when you???re off the Nationwide Sprint PCS Network. Any time you are roaming, the phone displays the roaming icon ().

Tip: Remember, when you are using your phone off the Nationwide Sprint PCS Network, always dial numbers using 11 digits (1 + area code + number).

Note: Unless your Sprint PCS Service Plan includes roaming, you will pay a higher per-minute rate for roaming calls.

Roaming on Other Digital Networks

When you???re roaming on digital networks, your call quality and security will be similar to the quality you receive when making calls on the Nationwide Sprint PCS Network.

However, you may not be able to access certain features.

Note: If you???re on a call when you leave the Nationwide Sprint PCS Network and enter an area where roaming is available, your call is dropped. If your call is dropped in an area where you think Sprint PCS Service is available, turn your phone off and on again to reconnect to the Nationwide Sprint PCS Network.

Checking for Voicemail Messages While Roaming

When you are roaming off the Nationwide Sprint PCS Network, you will not receive on-phone notification of new voicemail messages. Callers can still leave messages, but you will need to periodically check your voicemail for new messages if you are in a roaming service area for an extended time.

70 Section 2D: Controlling Your Roaming Experience

Using Call Guard

Your phone has two ways of alerting you when you are roaming off the Nationwide Sprint PCS Network: the onscreen roaming icon and Call Guard. Call Guard makes it easy to manage your roaming charges by requiring an extra step before you can place or answer a roaming call. (This additional step is not required when you make or receive calls while on the Nationwide Sprint PCS Network.)

To turn Call Guard on or off:

1.Select Menu > Settings > Roaming > Call Guard.

2.Highlight On or Off and press .

Note: Voice dialing and speed dialing are not available when you are roaming with Call Guard enabled.

To place roaming calls with Call Guard on:

1.From standby mode, dial 1 + area code + the seven-digit number and press .

2.Select Roam Call ().

To answer incoming roaming calls with Call Guard on:

1.Press .

2.Select Answer ( ).

Note: If the Call Guard feature is set to On, you need to take extra steps to make and receive roaming calls.

72 Section 2D: Controlling Your Roaming Experience

Section 2E

Managing Call History

Viewing History

You???ll find the Call History feature very helpful. It is a list of the last 20 phone numbers (or Contacts entries) for calls you placed, accepted, or missed. Call History makes redialing a number fast and easy. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.

Each entry contains the phone number (if it is available) and Contacts entry name (if the phone number is in your Contacts). Duplicate calls (same number and type of call) may only appear once on the list.

To view a Call History entry:

1.Select Menu > Call History.

2.Select Outgoing Calls, Incoming Calls, Missed Calls, or All Recent and press .

3.Highlight the entry you wish to view and press .

74 Section 2E: Managing Call History

Call History Options

For additional information and options on a particular call, highlight a Call History entry and press . This feature displays the date and time of the call, the phone number (if available), and the caller???s name (if the number is already in your Contacts). By pressing Options ( ), you can select from the following options:

Tip: You can also view the next Call History entry by pressing the navigation key right or view the previous entry by pressing the navigation key left.

Making a Call From Call History

To place a call from Call History:

1.Select Menu > Call History.

2.Select Outgoing Calls, Incoming Calls, Missed Calls, or

All Recent and press .

3. Use your navigation key to select a Call History entry and press .

Note: You cannot make calls from Call History to entries identified as No Caller ID, Unknown, or Restricted.

Saving a Phone Number From Call History

Contacts entries can store up to a total of five phone numbers, and each entry???s name can contain 20 characters.

To save a phone number from Call History:

1.Select Outgoing Calls, Incoming Calls, Missed Calls, or All Recent and press .

2.Use your navigation key to select the desired entry and select Options ( ).

3.Select Save and press .

4.Select New Entry and press .

5.Select a label and press .

6.Enter a name for the entry using the keypad and press .

7.Select Done ( ) to save and exit.

After you have saved the number, the Find screen is displayed. (See ???Finding Contacts Entries??? on page 81.)

Note: You cannot save phone numbers already in your Contacts or from calls identified as No Caller ID, Unknown, or Restricted.

76 Section 2E: Managing Call History

Prepending a Phone Number From

Call History

If you need to make a call from Call History and you happen to be outside your local area code, you can add the appropriate prefix by prepending the number.

To prepend a phone number from Call History:

Erasing Call History

To erase individual Call History entries, see ???Call History Options??? on page 75.

To erase Call History:

1.Select Menu > Call History.

2.Select Outgoing Calls, Incoming Calls, Missed Calls, or

All Recent and press .

3. Press Options ( ) and select Erase for the highlighted entry or Erase All for all entries and press .

Section 2F

Using Contacts

Adding a New Contacts Entry

Your phone's Contacts list can store up to 299 entries and each entry???s name can contain 20 characters.

To add a new entry:

1. Select Menu > Contacts > Add New Entry.

Shortcut: Enter the phone number in standby mode and press OK. Proceed with steps 2-5.

2.Enter a name for the new entry and press the navigation key down. (See ???Entering Text??? on page 38.)

3.Highlight the desired label entry (Mobile, Home, Work, Pager, Fax, or Others) and enter the phone number.

4.Select OK ().

5.Select Done ( ).

After you have saved the number, the Find entry screen is displayed. (See ???Finding Contacts Entries??? on page 81.)

80 Section 2F: Using Contacts

Finding Contacts Entries

There are several ways to display your Contacts entries: by name, by speed dial number, and by group. Follow the steps outlined in the sections below to display entries from the Contacts menu.

Finding Names

To find Contacts entries by name:

7.??? or ???

8.To display additional Contacts entries, press the navigation key left or right.

Shortcut: From standby mode, press Contacts (right softkey) to display the Contacts menu.

Finding Speed Dial Numbers

To find phone numbers you have stored in speed dial locations:

1.Select Menu > Contacts > Speed Dial #s.

2.Scroll through speed dial entries using your navigation key. Speed dial numbers are displayed in numeric order.

3.??? or ???

4.Enter the number of a speed dial location using your keypad.

5.To display an entry, highlight it and press .

6.To dial the entry???s default phone number, press .

Finding Group Entries

To find entries designated as part of a group:

1.Select Menu > Contacts > Group.

2.Scroll through the group titles using your navigation

key. To display entries belonging to a group, highlight the group and press .

3.Navigate through the group to find the desired contact.

4.To dial the entry???s default phone number, press .

82 Section 2F: Using Contacts

Editing a Contacts Entry???s Phone Number

To edit an entry???s phone number:

1.Display a Contacts entry (see page 81) and press .

2.Press Options ( ) > Edit.

3.Highlight the number you wish to edit and press .

4.Press to clear one digit at a time, or press and hold to erase the whole number.

5.Re-enter or edit the number and press .

6.Press OK ( ).

7.Press Done () to save the number.

Assigning Speed Dial Numbers

Your phone can store up to 98 phone numbers in speed dial locations. For details on how to make calls using speed dial numbers, see ???Using Speed Dialing??? on page 37.

Speed dial numbers can be assigned when you add a new Contacts entry, when you add a new phone number to an existing entry, or when you edit an existing number.

To assign a speed dial number to a new or existing phone number:

1.Add a phone number to a new or existing Contacts entry. (See ???Adding a New Contacts Entry??? on page 80 or ???Adding a Phone Number to a Contacts Entry??? on page 83.)

2.Highlight the number and press Options ( ).

Note: If you select a location that already has a speed dial entry associated, you can press Edit to overwrite the location.

84 Section 2F: Using Contacts

Selecting a Ringer Type for an Entry

You can assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See ???Ringer Types??? on page 44.)

To select a ringer type for an entry:

1.Display a Contacts entry and highlight the name of the person you wish to edit.

2.Press Options ( ) > Edit.

3.Highlight the current ringer type and press .

4.Select the desired ringer category and press .

5.Use your navigation key to scroll through available ringers. (When you highlight a ringer type, a sample ringer will sound.)

6.Highlight your desired ringer and press .

7.Press Done ( ) to save the new ringer type.

86 Section 2F: Using Contacts

Section 2G

Using the Phone???s Scheduler and Tools

Using Your Phone???s Scheduler

Adding an Event to the Scheduler

Your Scheduler helps organize your time and reminds you of important events.

To add an event:

1.Select Menu > Tools > Scheduler.

2.Using your navigation key, highlight the day to which you would like to add an event and press .

Tip: Press the navigation key up or down to scroll by week through the Scheduler.

3. Select Options ( ) > Add New ( ).

Note: If there are not any events scheduled for the selected day, the New Event screen is automatically displayed.

4.Enter a title for the event and press Next (). (See ???Entering Text??? on page 38.)

5.Select an initial time and date for the event by entering the Start time and Date.

???Using your keypad, enter the start time and date for the event.

6.Select an end time and date for the event by highlighting the End time and Date.

???Using your keypad, enter the end time and date for the event.

7.Select an alarm time for the event by highlighting the alarm field and pressing the navigation key left or right to select one of the following:

90 Section 2G: Using the Phone???s Scheduler and Tools

Going to Today???s Scheduler Menu

To go to the Scheduler menu for today???s date:

???Select Menu > Tools > Today.

Erasing a Day???s Events

To erase a day???s scheduled events:

1.Select Menu > Tools > Scheduler.

2.Using your navigation key, highlight the day for which you would like to erase events and press .

Tip: In the Scheduler view, days with events scheduled are highlighted.

3.Press Options ( ) and select Erase or Erase All. (An alert will appear notifying you of the number of events to be erased.)

4.Select Yes to confirm or No to Cancel.

Using Your Phone???s Alarm Clock

Your phone comes with a built-in alarm clock with multiple alarm capabilities.

To use the alarm clock:

1.Select Menu > Tools > Alarm Clock.

2.Select Alarm #1, Alarm #2, or Alarm #3 and press .

3.Turn the alarm on or off by highlighting the activation field.

???Press the navigation key left or right to select On or Off .

92 Section 2G: Using the Phone???s Scheduler and Tools

Using Your Phone???s Memo Pad

Your phone comes with a memo pad you can use to compose and store reminders and notes to help keep you organized.

To compose a note:

1. Select Menu > Tools > Memo Pad .

Note: If there are no memos saved yet, the New Memo screen is automatically displayed.

2.Select Options ( ) > Add New.

3.Type your note using the numeric keypad and press

. (See ???Entering Text??? on page 38.)

To read a saved note:

1.Select Menu > Tools > Memo Pad.

2.Highlight a note and press .

To delete saved notes:

1.Select Menu > Tools > Memo Pad.

2.Highlight a note and select Options ( ).

3.Select Erase or Erase All and press .

4.Select Yes and press .

Using Your Phone???s Tools

In addition to helping you be more efficient and organized, your phone offers useful and entertaining tools.

Using the Calculator

Your phone comes with a built-in calculator.

To use the calculator:

1.Select Menu > Tools > Calculator.

2.Enter the first number using your keypad.

???Press the navigation key up for Multiplication (x).

???Press the navigation key down for Division (??).

???Press the navigation key left for Subtraction (-).

???Press the navigation key right for Addition (+).

???Press or for a decimal point.

???Press for a negative number.

???Press to clear all numbers.

3.Enter the second number and press for Equals (=).

94 Section 2G: Using the Phone???s Scheduler and Tools

Task List

This option allows you to manage daily tasks that include dates, times, and priority levels.

Countdown

This option allows you to enter a timer that counts down to an event based on a date and time specified.

1. Select Menu > Tools > Countdown.

Note: If there are no countdowns saved, the New Countdown screen is automatically displayed.

2.Select Options ( ) > Add New.

3.Enter the countdown name using the keypad and press .

4.Select a time by highlighting the Time field.

???Using the keypad, enter the time of the countdown.

5.Select a date by highlighting the Date field.

???Using the keypad, enter the date of the countdown.

6.Select Done ( ) to save and exit.

World Time

To view the time in 24 different locations:

1.Select Menu > Tools > World Time.

2.Press the navigation key left or right to scroll through different cities and time zones.

3.Press Option () > DST Setting () to turn daylight saving time on or off.

96 Section 2G: Using the Phone???s Scheduler and Tools

Using Voicemail

Setting Up Your Voicemail

All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your Sprint PCS Voicemail and personal greeting as soon as your phone is activated.

To set up your voicemail:

1.Press and hold .

2.Follow the system prompts to:

???Create your passcode.

???Record your name announcement.

???Record your greeting.

???Choose whether or not to activate One-Touch

Message Access (a feature that lets you access messages simply by pressing and holding , bypassing the need for you to enter your passcode).

Note: Voicemail Passcode

If you are concerned about unauthorized access to your voicemail account, Sprint recommends you enable your voicemail passcode.

100 Section 3A: Sprint PCS Service Features: The Basics

Retrieving Your Voicemail Messages

You can review your messages directly from your phone or from any other touch-tone phone. To dial from your phone, you can either speed dial your voicemail or use the menu keys.

Using One-Touch Message Access

???Press and hold . (Your phone will dial your voicemail box.)

Using the Menu Keys on Your Phone to Access Your Messages

1.Select Menu > Messaging > Voicemail > Call Voicemail.

2.Press to listen to your messages.

Note: You are charged for airtime minutes when you are accessing your voicemail from your phone.

Using a Phone Other Than Your Phone to Access Messages

1.Dial your wireless phone number.

2.When your voicemail answers, press .

3.Enter your passcode.

Tip: When you call into voicemail, you first hear the header information (date, time, and sender information) for the message. To skip directly to the message, press 4 during the header.

102 Section 3A: Sprint PCS Service Features: The Basics

Setting Up Group Distribution Lists

Create up to 20 separate group lists, each with up to 20 customers.

1.Press and hold to access your voicemail. (If your

voicemail box contains any new or saved messages, press to access the main voicemail menu.)

2.Press to change your Personal Options, following the system prompts.

3.Press for Administrative Options.

4.Press for Group Distribution Lists.

5.Follow the voice prompts to create, edit, rename, or delete group lists.

Sprint PCS Callback

Return a call after listening to a message without disconnecting from voicemail.

???Press after listening to a message. (Once the call is complete, you???re returned to the voicemail main menu.)

Voicemail-to-Voicemail Message

Record and send a voice message to other Sprint PCS Voicemail users.

1.From the main voicemail menu, press to send a message.

2.Follow the voice prompts to enter the phone number.

3.Follow the voice prompts to record and send your voice message.

104 Section 3A: Sprint PCS Service Features: The Basics

Extended Absence Greeting

When your phone is turned off or you are off the Nationwide Sprint PCS Network for an extended period, this greeting can be played instead of your normal personal greeting.

1.From the main voicemail menu, press for Personal Options.

2.Press for greetings.

3.Press to record an Extended Absence Greeting.

Clearing the Message Icon

Your phone may temporarily continue to display the message icon after you have checked your voice and text messages.

To clear the icon from the display screen:

1.Select Menu > Messaging > Voicemail > Clear Envelope.

2.Select Yes or No and press .

106 Section 3A: Sprint PCS Service Features: The Basics

Autoplay

Message Date & Time On/Off

Change Passcode

Group Distribution List

Return to Personal Options Menu

Greetings

Personal Greetings

Name Announcement

Extended Absence Greeting

Return to Personal Options Menu

Expert Mode (On/Off)

Place a Call

Disconnect

108 Section 3A: Sprint PCS Service Features: The Basics

6.Review your message and press Send (). You may also select the following additional messaging options by pressing Options ():

???Edit to edit the existing message before sending.

???Priority to set the message priority level [Normal or Urgent].

???Call Back # to set the callback number.

???Save to Drafts to save the message without sending.

Accessing SMS Text Messages

To read an SMS Text message:

???When you receive a text message, it will automatically appear on your phone???s main display screen. Use your navigation key to scroll down and view the entire message.

To reply to an SMS Text message:

1.While the message is open, select Reply ( ).

2.Compose your reply, use the preset messages or emoticons.

???To type a message, use your keypad to enter your message. Use to select a character input mode.

???To use a preset message or an emoticon, select

Options ( ) and select Preset Msg, Recent Msg, or

Emoticons. Press the number on the keypad that corresponds to the number next to the message or emoticon.

3.Select Next ( ).

4.Review your message and press Send (). You may also select the following additional messaging options by pressing Options ():

???Edit to edit the existing message before sending.

110 Section 3A: Sprint PCS Service Features: The Basics

Using Caller ID

Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.

To block your phone number from being displayed for a specific outgoing call:

1.Press .

2.Enter the number you want to call.

3.Press .

To permanently block your number, call Sprint Customer Service.

Responding to Call Waiting

When you???re on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your phone???s screen informs you that another call is coming in and displays the caller???s phone number (if it is available).

To respond to an incoming call while you???re on a call:

???Press . (This puts the first caller on hold and answers the second call.)

To switch back to the first caller:

???Press again.

Tip: For those calls where you don???t want to be interrupted, you can temporarily disable Call Waiting by pressing *70 before placing your call. Call Waiting is automatically reactivated once you end the call.

112 Section 3A: Sprint PCS Service Features: The Basics

Using Call Forwarding

Call Forwarding lets you forward all your incoming calls to another phone number ??? even when your phone is turned off. You can continue to make calls from your phone when Call Forwarding is activated.

To activate Call Forwarding:

1.Press .

2.Enter the area code and phone number to which your future calls should be forwarded.

3.Press . (You will see a message and hear a tone to confirm the activation of Call Forwarding.)

To deactivate Call Forwarding:

1.Press .

2.Press . (You will see a message and hear a tone to confirm the deactivation.)

Note: You are charged a higher rate for calls you have forwarded.

114 Section 3A: Sprint PCS Service Features: The Basics

Programming the Phone for Voice Dialing

Programming your phone for voice activated dialing is easy. The phone provides voice prompts and screen displays to guide you through the recording process. To program the phone for voice activated dialing:

1.Select Menu > Voice Kit > Voice Dial > Record.

2.The phone will prompt you to ???Please say the name???? Wait for the beep and then say the name. (For best results, use names with at least two syllables, or use both a first and last name.) The phone stores the name as a ???first??? sample, and then prompts you to say the name again.

3.Respond to the prompt by repeating the name after the beep exactly as you did the first time. The phone stores the name as a second sample and then requests you to enter a phone number.

4.Enter the phone number on the keypad and select OK ( ).

5.Enter a name for the voice dial entry using the keypad and select Save ( ).

Note: If you do not enter a name for the voice dial entry, the phone number will display when reviewing your voice tag list.

116 Section 3A: Sprint PCS Service Features: The Basics

Placing a Call Using Voice Dial

To place a call if Voice Dial is inactive:

1.Open the flip and press and hold .

2.At the voice prompt, say the name into the phone.

???The phone automatically places the call if it recognizes the name.

???If the phone does not recognize the name, it beeps twice and says ???Please say the name.???

Reviewing Voice Dial Entries

To review Voice Dial entries:

1.Select Menu > Voice Kit > Voice Dial > Review.

2.A list of saved voice dial tags is displayed. Scroll to the

desired entry and press . The recorded name plays audibly.

Note: You can scroll through entries without having to listen to each one, or you can listen to them all as they play in order.

3. Press to return to the previous screen.

118 Section 3A: Sprint PCS Service Features: The Basics

Managing Voice Memos

You can use your phone???s Voice Services to record brief memos to remind you of important events, phone numbers, or grocery list items.

Recording Voice Memos

To record a voice memo:

1.Select Menu > Voice Kit > Voice Memo > Record.

2.Begin recording after the prompt.

To end the recording of your memo:

???Press for Done.

To record a conversation during a phone call:

1.During a call, select Options > Voice Memo. (A one- minute counter is displayed on the screen indicating the amount of time a single voice memo can be recorded.)

2.To pause the memo, select Pause ( ). To resume the recording, select Resume ( ).

3.To finish recording, select Done ( ).

Note: Your voice is not recorded during this process, only the incoming audio from the other caller.

Note: Your phone can store a total of 20 memos or up to three minutes.

120 Section 3A: Sprint PCS Service Features: The Basics

Erasing Voice Memos

To erase an individual memo:

1.Select Menu > Voice Kit > Voice Memo.

2.Select Review and press .

3.Highlight the desired memo.

4.Select Options ( ) and press Erase.

5.Select Yes and press .

To erase all voice memos:

1.Select Menu > Voice Kit > Voice Memo > Review.

2.Select Options ( ) > Erase All ( ).

3.Select Yes and press .

122 Section 3A: Sprint PCS Service Features: The Basics

Getting Started With Sprint PCS

Voice Command

With Sprint PCS Voice Command:

???You can store all your contacts??? phone numbers, so you can simply say the name of the person you want to call.

???There???s no need to punch in a lot of numbers, memorize voicemail passwords, or try to dial while you???re driving.

???You can call anyone in your address book ??? even if you don???t remember their phone number.

???You don???t need to worry about losing your contacts or address book. This advanced service is network-based, so if you switch or happen to lose your phone, you won???t lose your contacts or address book.

It???s Easy to Get Started

There are two easy ways to sign up for Sprint PCS Voice Command:

???Sign up when you purchase and activate your phone.

???Just dial from your phone to contact Sprint Customer Service and sign up.

There is a monthly charge for Sprint PCS Voice Command.

124 Section 3B: Sprint PCS Voice Command

Making a Call With Sprint PCS

Voice Command

To make a call with Sprint PCS Voice Command:

1.Press and you???ll hear the ???Ready??? prompt.

2.After the ???Ready??? prompt, simply say, in a natural voice, ???Call??? and the name of the person or the number you???d like to call. (For example, you can say, ???Call Jane Smith at work,??? ???Call John Baker on the mobile phone,??? ???Call 555-1234,??? or ???Call Bob Miller.???)

3.Your request will be repeated and you will be asked to verify. Say ???Yes??? to call the number or person. (The number will automatically be dialed.) Say ???No??? if you wish to cancel.

Tip: Keep in mind that Sprint PCS Voice Command recognizes not only your voice, but any voice, so that others can experience the same convenience if they use your phone.

For more helpful hints on Sprint PCS Voice Command, including a list of recognized commands and an interactive

tutorial, visit www.talk.sprintpcs.com.

126 Section 3B: Sprint PCS Voice Command

General Precautions

There are several simple guidelines to operating your phone properly and Speak directly into the mouthpiece.

???Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery.

???Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending, or sitting on it.

???Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment and void your authority to operate this equipment.

Note: For the best care of your phone, only Sprint authorized personnel should service your phone and accessories. Failure to do so may be dangerous and void your warranty.

Maintaining Safe Use of and Access to Your Phone

Do Not Rely on Your Phone for Emergency Calls

Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.g., medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services and/or mobile phone features are in use. Check with your local service provider for details.

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone without a hands-free device) is prohibited in some jurisdictions. Laws vary as to specific restrictions. Remember that safety always comes first.

Tip: Purchase an optional hands-free accessory at your local Sprint Store, or call the Sprint PCS Accessory Hotline?? at 1-800-974- 2221 or by dialing #222 on your phone.

132 Section 4A: Important Safety Information

Turning Off Your Phone in Dangerous Areas

To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives.

Turn your phone off when you're in any area that has a potentially explosive atmosphere. Although it's rare, your phone and accessories could generate sparks. Sparks can cause an explosion or fire, resulting in bodily injury or even death. These areas are often, but not always, clearly marked. They include:

???Fueling areas such as gas stations.

???Below deck on boats.

???Fuel or chemical transfer or storage facilities.

???Areas where the air contains chemicals or particles such as grain, dust, or metal powders.

???Any other area where you would normally be advised to turn off your vehicle???s engine.

Note: Never transport or store flammable gas, flammable liquids, or explosives in the compartment of your vehicle that contains your phone or accessories.

Restricting Children???s Access to Your Phone

Your phone is not a toy. Do not allow children to play with it as they could hurt themselves and others, damage the phone or make calls that increase your Sprint PCS Invoice.

134 Section 4A: Important Safety Information

Getting the Best Hearing Device Experience With Sprint PCS Vision Phone A420 by Samsung??

To further minimize interference:

???There is usually less interference on the microphone setting than the telecoil setting.

???Set the phone???s Display and Keypad backlight settings to ensure the minimum time interval:

1.Press Menu > Settings > Display > Backlight.

2.Select Main Display or Keypad and press .

3.Select the minimum time setting (8 seconds) and press .

???Use phones with a pull-out antenna. Phones with embedded antennae may produce more interference.

???Position the phone so the antenna is farthest from your hearing aid.

???Move the phone around to find the point with least interference.

136 Section 4A: Important Safety Information

Special Note: Be sure to dispose of your battery properly. In some areas, the disposal of batteries in household or business trash may be prohibited.

Radiofrequency (RF) Energy

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When it???s turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.

Knowing Radiofrequency Safety

The design of your phone complies with updated NCRP standards described below.

In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) joined in updating ANSI???s 1982 standard for safety levels with respect to human exposure to RF signals. More than 120 scientists, engineers and physicians from universities, government health agencies and industries developed this updated standard after reviewing the available body of research. In 1993, the Federal Communications Commission (FCC) adopted this updated standard in a regulation. In August 1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE standard and the guidelines published by the National Council of Radiation Protection and Measurements (NCRP).

Body-Worn Operation

To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Sprint supplied or approved carrying case, holster or other body-worn accessory. Use of non-Sprint-approved accessories may violate FCC RF exposure guidelines.

For more information about RF exposure, visit the FCC Web site at

www.fcc.gov.

Specific Absorption Rates (SAR) for Wireless Phones

The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head of a user of a wireless handset.

The SAR value of a phone is the result of an extensive testing, measuring, and calculation process. It does not represent how much RF the phone emits. All phone models are tested at their highest value in strict laboratory settings. But when in operation, the SAR of a phone can be substantially less than the level reported to the FCC. This is because of a

138 Section 4A: Important Safety Information

Phone Guide Proprietary Notice

CDMA Technology is licensed by QUALCOMM Incorporated under one or more of the following patents:

4,901,307 5,109,390 5,267,262 5,416,797

5,506,865 5,544,196 5,657,420 5,101,501

5,267,261 5,414,796 5,504,773 5,535,239

5,600,754 5,778,338 5,228,054 5,337,338

5,710,784 5,056,109 5,568,483 5,659,569

5,490,165 5,511,073

T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.

Phone Guide template version 5A (September 2005)

140 Section 4A: Important Safety Information

Manufacturer???s Warranty

STANDARD LIMITED WARRANTY

What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P. (???SAMSUNG???) warrants to the original purchaser (???Purchaser???) that SAMSUNG's Phones and accessories (???Products???) are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date:

What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical, electrical or electromechanical stress, or modification of any part of Product, including antenna, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) any plastic surfaces or other externally exposed parts that are scratched or damaged due to normal use; (d) malfunctions resulting from the use of Product in conjunction with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada. This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks, and this Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG phone for which it is specified.

142 Section 4B: Manufacturer???s Warranty

SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG

AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT

APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY

DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR

MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR

INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM

THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL,

SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF

ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY

TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT

COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY

BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST

PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION

MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO

HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO

PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE

OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES

PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED

WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,

SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE

ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY

WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE

CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW

PERMITS.

THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY

SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.

SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE

ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,

AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR

SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER

SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE

PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE

ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE

PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND

SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE

SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR

SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE

MAY BE.

144 Section 4B: Manufacturer???s Warranty