Check the version

The wireless LAN function was added in DP90S/DP90 version 2.00. If the version is earlier than 2.00, download the update from the support page (http://www.roland.com/ support/) g Downloads g product name (DP90S/DP90) g DP90S/DP90 System Program Version 2.00, and update your DP90S/DP90.

*If this supplementary manual was included with a new DP90S/DP90 you purchased, your instrument has already been updated to version 2.00 or later; you do not need to update.

How to check the version

Hold down the [???] and [+] button and turn ON the

DP90S/DP90.

What is Wireless LAN Function?

By inserting the wireless USB Adapter (WNA1100-RL; sold separately) into the DP90S/DP90???s USB MEMORY port, you???ll be able to use wireless-compatible applications (such as the ???Piano Partner??? iPad app).

Wireless USB Adapter (sold separately: WNA1100-RL)

Items required to use the wireless LAN function

????Wireless USB Adapter (sold separately: WNA1100-RL) ????Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3 ????iPad etc.

*1 The wireless LAN access point you use must support WPS. If your wireless LAN access point does not support WPS, you can connect using the procedure described in ???Connecting to a Wireless LAN Access Point That You Select (Select AP)??? (p. 2).

*2 The ability to connect with all kinds of wireless LAN access points is not guaranteed.

*3 If you???re unable to connect to the wireless LAN access point, try connecting using Ad-Hoc mode (p. 3).

Basic Connection Method (Connect by WPS)

The first time you connect the DP90S/DP90 to a wireless network, you???ll need to perform the following procedure (WPS) to join the wireless network.

This procedure is required only the first time. (Once you???ve joined the network, this procedure will no longer be necessary.)

What is WPS?

This is a standard that makes it easy to make security settings when connecting to a wireless LAN access point. We recommend that you use WPS when connecting to a wireless LAN access point.

???Proceed???? will appear.

6. Perform the WPS operation on your wireless LAN access point (e.g., press the WPS button on your wireless LAN access point).

For details on WPS operation of your wireless LAN access point, refer to the documentation for your wireless LAN access point.

7. Press the [ ] (Fast) button of the DP90S/DP90.

Once successfully connected, ???Success??? will appear.

*If you fail to connect, refer to ???Troubleshooting??? (p. 4).

8.Press the [Key Touch] or [Transpose] button to exit Function mode.

NOTE

*The device (e.g., iPad) running the app must be connected to the same network.

MEMO

???The connection data is stored in memory when you perform the WPS procedure; the device will automatically connect to the wireless network the next time.

???All connection data will be erased if you perform a factory reset.

Wireless LAN Function Settings

You can view or edit the wireless settings.

Basic Operation

1. While holding down the [Key Touch] button, press the [Transpose] button.

In the explanations that follow, procedures will be indicated using arrows, like this: ???Wireless??? g ???Status.???

Status Indication

This shows the wireless LAN status.

1. Select ???Wireless??? g???Status.???

The status screen will appear.

2. Press the [] (Fast) button to display the IP address.

Connecting to a Wireless LAN Access Point That You Select (Select AP)

This method lets you connect by choosing a wireless LAN access point from the list that is displayed.

* Wireless standards 802.11g/n (2.4 GHz) and authentication methods WPA/WPA2 are supported.

1. Select ???Wireless??? g???Connect??? g???Select AP,??? then press the [Song] button.

The Select Access Point screen will appear.

???An ???*??? symbol is shown for the currently-connected wireless LAN access point.

2.Press the [???] [+] button to choose the wireless LAN access point to which you want to connect, and press the [Song] button.

???You will be connected to the selected wireless LAN access point.

???If you???re using this wireless LAN access point for the first time, you???ll proceed to the authorization (PASS) screen.

???If this is a wireless LAN access point to which you have connected in the past, just press the [Song] button and you???ll be connected. Once successfully connected, ???Success??? will appear.

Authorization screen (PASS)

3. Enter the security code (passphrase) of your wireless LAN access point, and press the [Song] button.

How to enter characters

Use the [ ] [ ] (Slow/Fast) buttons to select the position at which you want to specify a character. Use the [???] [+] buttons to change the character.

* You cannot enter a space at the end of the passphrase.

Once successfully connected, ???Success??? will appear.

*If you fail to connect, refer to ???Troubleshooting??? (p. 4).

4.Press the [Key Touch] or [Transpose] button to exit Function mode.

Parameter Explanation

Specifies the final digits of the DP90S/DP90???s device name and Ad-Hoc SSID (DP90S/DP90) that will be shown as the instrument in the wirelessly connected app.

Normally, you should specify ???0,??? but if you have more than one of the same instrument, you can set the Wireless ID in

ID (Wireless ID) the range of 1???99 to change the device name and Ad-Hoc SSID for each instrument, as follows.

Connecting in Ad-Hoc mode

Here???s how to connect in Ad-Hoc mode.

What is Ad-Hoc mode?

Ad-Hoc mode lets you connect the DP90S/DP90 directly to an iPad or other wireless device without using a wireless LAN access point. This is a convenient way to use the DP90S/DP90 with an iPad or other wireless device if you???re in a location where the wireless LAN access point you normally use is unavailable, such as when you???re away from home.

Limitations

The iPad or other wireless device connected in Ad-Hoc mode will be unable to communicate with the Internet or with another wireless device. However, an iPad or other wireless device that has cellular capability will be able to connect to the Internet via the cellular connection.

Please be aware that if you use a cellular connection for Internet connectivity, you may incur costs depending on your rate plan.

The Ad-Hoc key is the five-digit number that???s displayed here. Each piano has its own unique number.

MEMO

???The Ad-Hoc SSID (DP90S/DP90) will be the value that you specified in the WIRELESS OPTIONS screen ???Wireless ID??? setting.

???The Ad-Hoc SSID and the Ad-Hoc key can also be verified in the status screen.

4.On the iPad or other wireless device that you want to connect, select the Ad-Hoc SSID shown in the above screen to make the connection. (For example, on an iPad, choose [Settings] g [Wi-Fi] g [Choose a Network] to select the above Ad-Hoc SSID (DP90S/90). A password entry screen will appear; enter the above Ad-Hoc key.)

For details on how to connect to a wireless LAN from an iPad or other device, refer to the owner???s manual of that device.

5.Press the [Key Touch] or [Transpose] button to exit Function mode.

6.When you have finished the Ad-Hoc mode connection, restore the iPad settings in [Settings] g [Wi-Fi] g [Choose a

Network] to their previous state.