42-4056.fm Page 1 Friday, April 26, 2002 9:14 AM

/&/;:4"/+&+"-G[DQCTF

Two Power Options ??? let you power the keyboard from internal batteries (not supplied) or standard AC power (with an optional adapter), so you can make music almost anywhere (see ???Connecting Power??? on Page 2).

12-Note Polyphonic Sound ??? lets you play and hear up to 12 notes at the same time, so you can play or create almost any type of music.

100 Prerecorded Tunes ??? let you hear a sample of what you and your keyboard can do. You can play the tunes either one at a time or consecutively, and you can turn off the melody or accompaniment portion so you can play along with the tunes (see ???Playing the Prerecorded Tunes??? on Page 5).

Middle ???C???

61 Full-Sized Keys ??? provide the feel of a fine musical instrument.

Large Music Information Display ??? shows you a staff with the notes and chords as you play them, along with the fingering, current tone, rhythm, volume, melody, and tempo. The display also shows a metronome icon to indicate the beat.

This Owner???s Manual explains how to use this electronic keyboard. It does not teach music.

Your keyboard includes a MIDI (Musical Instrument Digital Interface) feature, which lets you connect it to other MIDI-equipped musical instruments or devices ??? even your personal computer. The keyboard conforms to most, but not all, General MIDI specifications. Because of this, you might experience some incompatibility when using the keyboard with another General MIDI device. See ???Using MIDI??? on Page 10.

?? 2002 RadioShack Corporation.

All Rights Reserved.

Adaptaplug, RadioShack, and RadioShack.com are trademarks used by RadioShack Corporation.

42-4056.fm Page 2 Friday, April 26, 2002 9:14 AM

The

#"+/2146#06"#

6*'"(%%"9#065";17"61"-019

KnowtoYouWantsFCC

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and receiver.

???Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

???Consult your local RadioShack store or an experienced radio/TV technician for help.

If you cannot eliminate the interference, the FCC requires that you stop using your keyboard.

You must use shielded interface cables with this equipment.

R"9#40+0)??R"

Dispose of old batteries promptly and properly. Do not burn or bury them.

."%#76+10".

Installing Batteries

%100'%6+0)"219'4

You can power your keyboard using internal batteries or standard AC power with an optional AC adapter.

+056#..+0)"$#66'4+'5

Your keyboard can use 6 AA batteries (not supplied) for power. For the best per- formance and longest life, we recommend RadioShack alkaline batteries. .

1.Make sure POWER/MODE is set to OFF.

2.While pressing the tab on the battery compartment cover on the bottom of the keyboard, pull up the cover to remove it.

3.Place the batteries in the compartment as indicated by the polarity symbols (+ and ???) marked inside.

4.Replace the cover.

When the keyboard stops operating properly, replace the batteries. .#R??

75+0)"#%"219'4

You can power the keyboard using a 9V, 800 mA AC adapter and a size M Adaptaplug??? adapter (neither supplied). Both are available at your local RadioShack store or online at www.radioshack.com. Connecting an AC adapter automatically disconnects any internal batteries. .

1.Make sure POWER/MODE is set to OFF.

2.Set the AC adapter???s voltage switch to

9V.

3.Insert the Adaptaplug adapter into the adapter???s cord so it reads ??? TIP.

4.Connect the AC adapter???s barrel plug to DC 9V on the back of the keyboard.

5.Plug the AC adapter???s other end into a standard AC outlet.

Always disconnect the AC adapter when you finish using the keyboard.

%100'%6+0)"*'#&2*10'5

Using AC Power

You must use a Class 2 power source that supplies 9V DC and

! delivers at least 800 mA. Its center tip must be set to negative and its plug must fit the keyboard's DC 9V jack. Using an adapter that does not meet these specifications could damage the keyboard or the adapter.

To listen to your keyboard without disturbing others, you can connect an optional pair of stereo headphones with a 1/4-inch (6.35 mm) plug. RadioShack sells a wide selection of headphones. Insert the headphones??? plug into PHONES/OUTPUT on the back of the keyboard. Connecting headphones disconnects the keyboard???s built-in speakers.

???Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent hearing loss.

???Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.

???Always connect the AC adapter to the keyboard before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the keyboard.

.+56'0+0)"5#('.;

To protect your hearing, follow these guidelines when you use headphones.

???Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level.

2

42-4056.fm Page 3 Friday, April 26, 2002 9:14 AM

%100'%6+0)"#0"':6'40#."#/2.+(+'4

75+0)"6*'"5*''6"/75+%"56#0&

Connecting an External Amplifier

To easily view sheet music while playing your keyboard, insert the supplied sheet music stand into the holes on the top back panel.

3

42-4056.fm Page 4 Friday, April 26, 2002 9:14 AM

#"37+%-".11-"#6";174"-';$1#4&

(Back of Keyboard)

Look Quick A

MIDI In/Out Jacks ???

let you connect the keyboard to another MIDI-equipped device. To connect a MIDI device to your keyboard, see ???Making the MIDI Connections??? on Page 10.

Sustain Jack ??? lets you connect a sustain pedal (not supplied) to the keyboard so you can sustain your keyboard???s sound (see ???Using a Sustain Pedal??? on Page 10).

Headphones/ Output Jack ??? lets you connect headphones so you can play without disturbing others, or an external amplifier so you can play for a crowd (neither supplied).

Keyboard Your at

Chord Book ??? lets you easily see which keys to press and which fingers to use to form a chord, as well as a chord???s name (see ???Using the Chord Book??? on Page 9).

Transpose Function ??? lets you instantly change the key of the music, even while you are playing (see ???Changing Keys??? on Page 10).

Tune Control ??? lets you adjust the pitch of your keyboard so you can play in tune with other instruments (see ???Tuning the Keyboard??? on Page 10).

Tempo Control ??? lets you speed up or slow down the tempo of any selected music pattern.

Numeric Keypad ???makes it easy to enter the name of a chord, song, tone, and rhythm, to adjust the accompaniment volume, and to change the key and pitch.

4

42-4056.fm Page 5 Friday, April 26, 2002 9:14 AM

$#5+%"12'4#6+10

1.To turn on the keyboard, set POWER/

MODE to NORMAL. The POWER/MODE indicator lights. ??

2.To hear a sample of the keyboard???s many sounds, play a prerecorded tune (see ???Playing the Prerecorded Tunes???). To make your own music, simply begin playing the keyboard.

3.Repeatedly press MAIN VOLUME ??? or ??? to increase or decrease the volume. The current setting appears.

4.To turn off the keyboard, set POWER/ MODE to OFF. The POWER/MODE indicator turns off.

If you use batteries to power the keyboard, it automatically turns itself off after about 6 minutes if you do not press a key. To turn on the keyboard again, set POWER/MODE to NORMAL. To cancel auto power off, turn on the keyboard while holding down TONE. The next time you turn the keyboard off, then back on again, it automatically turns off after about 6 minutes.

??"016'"??"

Basic Operation

2.#;+0)"6*'"24'4'%14&'&"670'5

The keyboard at the bottom of the display shows the location of the keys being pressed.

Playing Back a Prerecorded Tune

2.#;+0)"$#%-"#"

24'4'%14&'&"670'

1.Press SONG. An indicator appears next

to SONG and the number of the current tune appears. ??

2.Choose a tune from the 100 SONGS

list and enter its two-digit number on the keypad. ??

Or, you can press ??? or + to move to the next higher or lower numbered tune.

3.Press PLAY/PAUSE to start playing the tune.

You can change the tune by repeating Step 2 even while a tune is playing. The new tune immediately begins to play.

As a tune plays, the display shows:

??? a ???score??? revealing the notes that are playing (right side of the display)

??? a ???keyboard??? to show you the fingering and which

keys are pressed (bottom of the display)

??? a ???metronome??? to show you the selected tempo ??? the metro- nome???s bar swings along with the tempo you selected, and the black dots above the metronome show the beat count in the measure

???the chord name (except for tunes 80 to 99, center right of the display)

??? ???hands??? that show the fingering to play the tune and chords

4.Use MAIN VOLUME to adjust the overall volume as desired.

To adjust only the accompaniment volume (except tunes 80 to 99), press

ACCOMP VOLUME then enter the

desired volume level using the number keys (between & and /) or press + or ??? within 5 seconds.

5.To move to a particular section of a tune, hold down REW or FF during play. When you think you have reached the section you want, release REW or FF to resume normal play.

6.To change the tempo, press TEMPO ??? or ???. The current tempo setting appears. ??

Basic Operation

5

42-4056.fm Page 6 Friday, April 26, 2002 9:14 AM

??"016'"??"

Playing Along with a

Prerecorded Tune

???You can find the scores for most of the prerecorded tunes in the Play Guide for the Prerecorded Tunes, supplied with your keyboard.

???Tunes 80 to 99 are solo tunes. You can turn off either the right-hand or left-hand portion, but not both.

???If you select tunes 00 through 79 and turn off both the melody and accompaniment, the keyboard plays an obligato accompaniment (a simple background accompaniment).

???You can turn the melody on or off by repeating Step 2 even while the current tune is playing.

Using the Preset Tones

7.To temporarily stop playing the tune, press PLAY/PAUSE again. To stop the tune completely, press STOP.

2.#;+0)"#.10)"9+6*"#" 24'4'%14&'&"670'

Follow these steps to have the keyboard not play the melody or accompaniment of a prerecorded tune, so you can play it instead!

??

1.Select and enter the tune you want to play.

2.Press ON/OFF RIGHT to turn off the mel- ody. H disappears from the ???hands,??? indicating that the keyboard is not play- ing the right-hand portion of the music.

Or, press ON/OFF LEFT to turn off the accompaniment. B disappears from the ???hands.???

3.Press PLAY/PAUSE to start play.

4.Adjust the tempo and volume as desired.

5.Play along with the tune on the keyboard.

6.To temporarily stop playing the tune, press PLAY/PAUSE again. To stop the tune completely, press STOP.

6740+0)"#22.#75'"1((110

When you turn off either the melody or accompaniment and then play a tune, applause automatically sounds at the end of the tune. To turn off the applause, hold

down STOP and press either ON/OFF LEFT or ON/OFF RIGHT. 7fbi3E\\ appears. To turn the

applause on again, press the same buttons. 7fbi3Ed appears.

%105'%76+8'.;"2.#;+0)" $#%-"6*'"670'5

Normally, the tune you selected plays continuously until you press STOP. To play all 100 prerecorded tunes consecutively, press either TONE or RHYTHM, then press PLAY/PAUSE. The keyboard plays the tunes in sequence starting with Tune 00.

To stop consecutive playback, press STOP.

75+0)"6*'"24'5'6"610'5

Tones Preset the Using

Selecting/Playing a Preset Tone

???Precede a single-digit number with a 0. For example, to select ELEC PIANO 1 (No. 04), press 0 4.

???If you enter an incorrect first digit, press TONE to clear your entry, then enter the correct digit.

Your keyboard can simulate 100 different musical instruments or sound effects. The TONES list on the keyboard???s top panel shows the name and two-digit number for each 100 preset tone.??

5'.'%6+0)12.#;+0)"#"24'5'6" 610'

1.Press TONE. An indicator appears next

to TONE and the current tone???s number appears. ??

2.To play a different tone, choose a preset tone from the 100 TONES list and enter its two-digit number on the keypad. As you press the keys, the selected digits appear.

Or, you can use + or ??? to move to the next higher or lower numbered tone.

3.Play the keyboard to hear the selected tone and adjust MAIN VOLUME to the desired level.

4.To select a different tone, repeat Steps 1 and 2.

6QPG".KUV

SYNTH-SOUND

60SYN-LEAD 1

61SYN-LEAD 2

62SYN-LEAD 3

63SYN-CALLIOPE

64SYN-PAD 1

65SYN-PAD 2

66SYN-PAD 3

67GLASS HMCA

68COUNTRY FARM

69SYN-BASS

70PEARL DROP

71COSMIC SOUND

72SOUNDTRACK

73SPACE PAD

74VOICE BASS

75APPLAUSE

76SYNTH-SFX (sound effects)

77VEHICLE

78PHONE

79FUNNY

.#;'4'&"610'5

The preset tones numbered 80 through 89 on your keyboard let you automatically play two different layered tones at the same time when you press one key. For example, STR PNO (No. 80) plays string and piano tones when you press a key.

6QPG".KUV

80 STR PIANO

81 STR E.PIANO

82 CHOIR E.P

83 CHOIR ORGAN

84 STR GUITAR

85 STR HARP

86 BRASS STR

87 VIB PAD

88 12 STR GTR

89 CHOIR STR

6

42-4056.fm Page 7 Friday, April 26, 2002 9:14 AM

-';$1#4&"52.+6"610'5 2'4%755+10"5170&5

The preset tones numbered 90 through 96 on your keyboard let you automatically play two different musical instruments or sound effects independently on opposite sides of the keyboard.

The instrument listed first in the tone???s name plays on the left half of the keyboard (below middle C). The instrument listed next plays on the right half of the keyboard (above middle C). For example, BS/PNO (No. 90) plays a bass tone on the left half of the keyboard and a piano tone on the right.

PERCUSSION (No. 99) lets you play the 39 different percussion sounds shown here. The symbol for each sound appears above the corresponding key on the keyboard. ??

??"016'"??"

Percussion Sounds

When you select the Fingered or Concert Chord mode, the keys in the lower 11/2 octaves become the accompaniment keys and do not produce percussion sounds. See ???Using Auto Accompaniment??? on Page 8.

Selecting/Playing an Auto-Rhythm

???The keyboard automatically selects the rhythm Club Pop (No. 00) when you turn the power on.

???Precede a single-digit number with an 0. For example, to select POP BALLAD (No. 05), press 0 5.

???If you incorrectly enter the first digit of the rhythm, press RHYTHM to clear the entry and return to the last selected auto-rhythm.

???You can adjust the tempo to play an auto- rhythm from 20 to 255 beats per minute.

???To quickly slow down or speed up the tempo, hold down TEMPO ??? or???.

???To reset the tempo to its default (original) speed, press TEMPO ??? and ??? at the

same time.

75+0)"6*'"24'5'6"#761/4*;6*/5

Your keyboard has 100 preset auto-rhythms that provide a steady beat for your music. The name and two-digit number of each preset auto-rhythm is listed on the keyboard???s top panel.

You can play a preset auto-rhythm on the keyboard in any of the following ways:

???Select and play a rhythm (see ???Selecting/Playing an Auto-Rhythm???)

???Synchronize the start of a rhythm with your music (see ???Using SYNCHRO???)

???Briefly vary the pattern of a rhythm (see ???Using FILL-IN???)

5'.'%6+0)12.#;+0)"#0"

#761/4*;6*/

1.Press RHYTHM. An indicator appears to

the right of RHYTHM and the number of the current auto-rhythm appears. ??

2.To select a different rhythm, choose an auto-rhythm from the 100 RHYTHMS list and enter its two-digit number on the keypad. Or, repeatedly press + or ??? to move to the next higher or lower numbered rhythm.

3.Press START/STOP to start the selected auto-rhythm.

4.Adjust MAIN VOLUME and ACCOMP VOLUME to the desired level (see ???Adjusting the Accompaniment Volume??? on Page 8).

5.To change the auto-rhythm speed, press TEMPO ??? or ???. The current tempo setting appears.

6.Play the keyboard along with the auto- rhythm.

7.To select a different rhythm, repeat Steps 1 and 2.

8.To stop the auto-rhythm, press START/ STOP again.

75+0)"5;0%*41

This feature lets you synchronize the start of an auto-rhythm with the beginning of your music.

After you select and enter an auto-rhythm, press SYNCHRO/FILL-IN. The bars of the metronome flash to show the keyboard is in standby mode.

Begin playing the keyboard. The keyboard automatically begins to play the rhythm when you press any key within the first 11/2 octaves of the lower end of the keyboard (the first 18 keys from the left side of the keyboard).

75+0)"(+../+0

This feature lets you insert a short (1- to 2- measure) variation in the beat pattern of a selected auto-rhythm.

Press and release SYNCHRO/FILL-IN while the auto-rhythm is playing. The keyboard inserts a 1- to 2-measure variation, then the

Using the Preset Auto-Rhythms

7

42-4056.fm Page 8 Friday, April 26, 2002 9:14 AM

Accompaniment Auto Using

??"016'"??"

Using Auto Accompaniment

???You can use the keyboard???s rhythm controls (FILL-IN and SYNCHRO) with both types of auto accompaniment.

???After you press the auto accompaniment keys, the keyboard plays the same chord until you press other keys to play a different chord or press START/STOP.

original rhythm automatically resumes at the end of the current measure.

Adjusting the Accompaniment Volume

You can adjust the accompaniment volume separately for your keyboard play and prerecorded tune playback.

Concert Chord

You can press any labeled note(s) to the right of the lowest note in the chord to produce a minor, a dominant seventh, or minor seventh chord.

You can set the keyboard to play two different types of auto accompaniment using the accompaniment keys. ??

???Concert Chord ??? lets you play chords on the accompaniment keys using chord formations of one to four notes. The number of keys you press determines the type of chord that plays (see ???Concert Chord???).

???Standard Fingering ??? lets you play chords on the accompaniment keys using standard chord formations of three or four notes (see ???Standard Fingering??? on Page 9).

#&,756+0)"6*'"

#%%1/2#0+/'06"81.7/'

The keyboard lets you adjust the volume of your accompaniment separately from the overall volume of the keyboard.

1.Press ACCOMP VOLUME. The current

accompaniment volume setting appears next to 7Yecf??Leb.

2.Within 5 seconds, enter a number from 0 (no sound) to 9 (loudest) on the keypad. The number appears as you press the key.

Or, press ??? or + to select the next lowest or highest accompaniment volume setting.

To reset the accompaniment volume to its default value of 7, press ??? and + at the same time. ??

The number of accompaniment keys you press determines the type of chord that plays. This chart shows the chord type that plays when you press one, two, three, or four accompaniment keys at the same time.

0WODGT"QH"-G[U"2TGUUGF %JQTF"6[RG

C D E F G A B C D E F

Major

C D E F G A B C D E F

Minor (m)

C D E F G A B C D E F

Dominant

Seventh (7)

C D E F G A B C D E F

Minor

Seventh (m7)

The lowest note you play determines the key of the chord. For example, if the lowest note is C, the keyboard plays a C chord. ??

1.Set POWER/MODE to CONCERT CHORD.

2.Enter a two-digit auto-rhythm number.

3.To start the auto-rhythm before the auto accompaniment, press START/STOP.

Or, to synchronize the start of the selected auto-rhythm with your accompaniment, press SYNCHRO/FILL- IN.

4.Begin the accompaniment at the desired interval by pressing the desired accompaniment key(s).

To play a melody along with the accompaniment, press any key(s) to the right of the accompaniment keys.

5.Adjust the tempo, MAIN VOLUME, and ACCOMP VOLUME to the desired levels.

6.To change chords without interrupting the rhythm, simply press the auto accompaniment key(s) required to form the new chord.

7.To stop auto accompaniment and the auto-rhythm, press START/STOP.

8

42-4056.fm Page 9 Friday, April 26, 2002 9:14 AM

56#0&"(+0)'4+0)

The standard fingering method uses standard formations of three or four notes, and lets the experienced musician play a wider variety of accompaniment chords. ??

This chart shows the 15 chord types you can play on your keyboard by using standard fingering.

1.Set POWER/MODE to FINGERED.

2.Select and enter an auto-rhythm.

3.To start the auto-rhythm before your auto accompaniment, press START/ STOP.

Or, to synchronize the start of the selected auto-rhythm with your accompaniment, press SYNCHRO/FILL- IN.

4.Begin the accompaniment at the desired interval by pressing at least three accompaniment keys to play the desired chord.

To play a melody along with the accompaniment, press any key(s) to the right of the accompaniment keys.

5.Adjust the tempo, MAIN VOLUME, and ACCOMP VOLUME to the desired levels.

6.To change chords without interrupting the rhythm, simply press the auto accompaniment keys required to form the new chord.

7.To stop auto accompaniment and the auto-rhythm, press START/STOP.

??"016'"??"

Standard Fingering

???You do not have to press the key marked with parentheses on the keyboard in the chart to produce a 7, m7, M7, mM7, add9, or madd9 chord.

???Although the chart shows only one possible fingering position for each chord, it is possible to play a chord using several different positions. For example, the following three positions produce the same C chord.

???When you play an aug, 7??? 5, or dim7 chord, the lowest note you play determines the root of the chord. Be sure that your fingering correctly defines the root you want.

???See ???Standard Fingering Chord Charts??? on Page 13 for all the chords you can play on your keyboard using standard fingering accompaniment.

Using the Chord Book

Using the Chord Book

75+0)"6*'"%*14&"$11-

You can use your keyboard???s chord book display feature to see which keys to press and which fingers to use to form a chord. You can also display the name of a chord you play.

1.Set POWER/MODE to NORMAL or CONCERT CHORD, then press CHORD BOOK.

2.Press CLEAR (0) to clear any previous chord entry.

3.If you want to see information about a major chord while you play it, skip to Step 4. Otherwise, enter the chord???s name using that chord???s keys on the numeric keypad.

For example, to enter a minor 7??? 5 chord, press m (8) 7 (9) ???5 (2). Or, to enter 7sus4, press 7 (9) and sus4 (1).

4.Press the root key on the accompaniment keyboard to play the chord.

As the chord plays, the display shows the chord you entered, the keys to press to form the chord (on the bottom ???keyboard???), the fingers you need to use to play the chord (on the center ???hands???), and the notes that make up the chord (on the staff display).

5.Use ??? or + to scroll through the chords associated with the root chord you entered in Step 3. Or, press a different

root key to see the chords based on that key. ??

6.Using the center ???hands??? as a guide, play the displayed chord on the keyboard.

7.You can also display the name of the chord you play on the accompaniment keyboard. Press CHORD BOOK then CLEAR to erase any previous entry. Then play the chord on the accompaniment keyboard. The name of the chord appears.

8.When you have finished, press CHORD BOOK to turn off chord book.

9

42-4056.fm Page 10 Friday, April 26, 2002 9:14 AM

52'%+#."('#674'5

The keyboard automatically selects the key of middle C each time you turn it on.

For added flexibility as you play, the keyboard lets you change (transpose) the musical key in which it plays. ??

1.Repeatedly press TRANSPOSE/TUNE/ MIDI until JhWdi and the current key setting appear.

2.Within 5 seconds, press ??? or + to lower or raise the key. Each time you press ??? or +, the number decreases or increases by 1 semitone.

As you raise the key, 1 is C, 2 is D, and so on. As you lower the key, ???1 is B, ???2 is B , ???3 is A, and so on.

Although your keyboard never goes out of tune, you can adjust its pitch to match other instruments or musical recordings. ??

1.Repeatedly press TRANSPOSE/TUNE/ MIDI until the display shows Jkd[ and the current pitch setting.

2.Within 5 seconds, repeatedly press ??? or + to lower or raise the keyboard???s pitch. Each time you press the key, the number decreases or increases by 1 cent.

75+0)"#"5756#+0"2'&#.

For added flexibility and control as you make music, you can connect an optional sustain pedal, available through RadioShack.

A sustain pedal lets you sustain the keyboard???s sound.

To connect a sustain pedal to your keyboard, insert the pedal???s plug into SUSTAIN on the back of the keyboard.

75+0)"/+&+

Tuning the Keyboard

???You cannot tune the keyboard while a prerecorded tune is displayed or playing.

???The number on the display is the number of cents to which the keyboard is currently tuned, compared to its default pitch. A cent is the measurement representing the acoustical interval between two tones. 1200 cents equal 1 octave. You can tune the keyboard to within 50 cents (101 levels) of its default pitch.

???You can use the number keypad to raise the pitch by entering the cent change value.

???The keyboard automatically resets the tuning pitch to the default value of 00 (cents) each time you turn off the keyboard or play the prerecorded tunes.

Making the MIDI Connections

You do not need to make both connections if you are only either sending or receiving.

MIDI Data

???The keyboard???s prerecorded tunes cannot be sent as MIDI data.

???For detailed specifications of the MIDI function, see the ???MIDI Implementation

."%#76+10".

Your keyboard includes a feature called MIDI (Musical Instrument Digital Interface). MIDI is the universal standard for sending and receiving performance data between all types of electronic musical instruments, regardless of manufacturer. Using MIDI, you can play music on your keyboard and another instrument at the same time while pressing the keys on only one, record your music to a sequencer, acquire a wider selection of preset tones from a sound module, and much more.

Connecting your keyboard to another MIDI device requires a MIDI cable (not supplied).

For detailed specifications of the MIDI function, see the ???MIDI Implementation Chart??? on Page 17.

#$176"/+&+

Every MIDI-equipped instrument has MIDI OUT and IN terminals, and some also have a MIDI THRU terminal. Each of these terminals serves a different purpose.

MIDI OUT sends MIDI data to (???talks to???) the other MIDI instrument(s).

MIDI IN receives (???listens to???) MIDI data sent by the other MIDI instrument(s).

MIDI THRU lets you connect (???network???) additional MIDI instruments, and sends other MIDI devices a copy of all data it receives through its MIDI IN terminal.

The cable that connects MIDI devices does not actually carry sound between them, like a speaker wire carries sound from a receiver to a speaker. Instead, MIDI-equipped devices communicate with each other using digital codes (instructions). One MIDI device sends digital instructions representing exactly what is being played on it. The other MIDI device receives and translates those instructions, then produces (or records) the sound exactly as it was played on the first device.

/#-+0)"6*'"/+&+" %100'%6+105

To connect your keyboard to another MIDI- equipped device, you must use a MIDI cable (available at RadioShack). .

To send MIDI data from your keyboard, use a MIDI cable to connect the keyboard???s MIDI OUT terminal to the other device???s MIDI IN terminal.

To receive MIDI data on your keyboard, use a MIDI cable to connect the keyboard???s MIDI IN terminal to the other device???s MIDI OUT terminal. ??

/+&+"&#6#

Your keyboard can send and receive several different types of MIDI data. The keyboard???s tones, rhythms, and other types of MIDI data are sent automatically as you play. ??

Your keyboard has MIDI OUT and MIDI IN terminals.

10

MIDI IN

42-4056.fm Page 11 Friday, April 26, 2002 9:14 AM

Note On/Off ??? specifies which keys are pressed (Note On) or released (Note Off). Also includes how loud a note is played as a value from 0 to 127. ??

Program Change ??? specifies the tone. The keyboard sends program change data in the range of 0 to 99, corresponding to tone numbers. It receives data within the same range if GM tone mapping is set to N, or in the range of 0 to 127 if GM tone mapping is set to G. In the latter case, tones in the range of 100 to 127 are translated to the closest tone that the keyboard has.

Pitch Bend ??? supplies Pitch Bend information. The keyboard???s pitch changes as it receives a Pitch Bend message through the terminal.

Control Change ??? adds effects such as vibrato and volume changes during keyboard play. The message includes a control number (the effect type) and a control value (the on/off and depth of the effect).

Here is the data that can be received with this keyboard and the corresponding control number.

The keyboard can send Hold1 Control Change data only when you connect a sustain pedal and press it.

%*#0)+0)"/+&+"5'66+0)5

The keyboard lets you change two MIDI parameters, Tone Map and Keyboard Channel.

Tone Map ???sets the range of program change values received/recognized by this keyboard.

1.Repeatedly press TRANSPOSE/TUNE/ MIDI until JedCWf3D appears.

2.Within 5 seconds, press ??? or + to select the setting you want.

D: Normal Tone Map. This setting allows receipt of 0 to 99 program changes. Each program change corresponds to one of the prerecorded tones.

=: General MIDI Tone Map. This setting allows receipt of all 0 to 127 program changes. Any data over 100 are translated to the closest tone the keyboard has. See ???Note Table??? on Page 15 for details.

Select = when you listen to General MIDI data from an external device.

Keyboard Channel ??? sets the channel for sending MIDI data to an external device (Default: 01). The keyboard receives MIDI data on channels 1 through 4 and 10 only. The data received on other channels are ignored. For transmission of MIDI data, you can use any of 16 channels.

1.Repeatedly press TRANSPOSE/TUNE/ MIDI until A[oXZ??9^ appears.

2.Within 5 seconds, press ??? or + to select the channel you want.

016'5"#$176"6*'"/+&+" +/2.'/'06#6+10"%*#46

The ???MIDI Implementation Chart??? on Page 17 shows specific details about how your keyboard is compatible with the MIDI standard. The following notes explain how the keyboard works within the MIDI standard.

Basic Channel ??? The MIDI standard allows for the use of up to 16 channels to exchange data. Like a TV broadcast, each of these channels can contain different data. The keyboard can send data on all 16 of these channels and can receive data on channels 1 through 4 and channel 10.

Mode ??? The MIDI standard allows for four separate modes of operation. The keyboard sends and receives data in Mode 3. This means that the data sent and received by the keyboard can be polyphonic and can be sent or received on only one channel at a time.

Note Number ??? The MIDI standard allows for note numbers from 0 through 127. This number represents each possible note that a device can play. The lowest note number

(0) is five octaves below middle C and the highest note number (127) is three octaves above middle C. The keyboard can receive all 128 note numbers and can send note numbers between 36 and 96.

If the keyboard receives a note number outside its range, it automatically assigns the note to a key within its key range.

The keyboard???s lowest note is two octaves below middle C, and the highest note is three octaves above middle C.

Velocity ??? The MIDI standard allows for velocity numbers from 0 through 127. Velocity is how fast a key is pressed (or if the key is pressed at all) or how loud a note sounds. A velocity of 0 means that the key is not pressed. The lowest velocity (1) is pianissimo and the highest velocity (127) is fortissimo. The keyboard can receive all 128 velocity numbers and can send velocity numbers 75 or 100.

9n ??? This means that the Note ON message is 9 hexadecimal for the channel number n.

??"016'"??"

???The pitch of a note depends on the tone that is being used, as shown in the ???Note Table??? on Page 15.

???If the keyboard receives a ???request??? to play notes outside of its range (higher or lower), it automatically selects the same note in the nearest octave.

Using MIDI

11

42-4056.fm Page 12 Friday, April 26, 2002 9:14 AM

Troubleshooting

12

Keep the keyboard dry; if it gets wet, wipe it dry immediately. Use and store the keyboard only in normal temperature environments. Handle the keyboard carefully; do not drop it. Keep the keyboard away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

5'48+%'"#0&"4'2#+4

If your keyboard is not performing as it should, take it to your local RadioShack store for assistance. Modifying or tampering with the keyboard???s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it.

42-4056.fm Page 13 Friday, April 26, 2002 9:14 AM

56#0&"(+0)'4+0)"%*14&"%*#465

These tables show the left-hand fingering for the chords you play most often.

This illustration shows which fingers on your left hand match the numbers on the charts. The illustration also appears on your keyboard???s display.

You cannot play chords marked with an asterisk (*) in the fingered mode on this keyboard.

Standard Fingering Chord Charts

13

Charts Chord Fingering Standard

14

42-4056.fm Page 15 Friday, April 26, 2002 9:14 AM

016'"6#$.'

Legend:

(1)Tone number

(2)Maximum polyphony

(3)Range type (see Page 17)

(4)Corresponding general MIDI number (see ???MIDI Data??? on Page 10)

Note Table

15

42-4056.fm Page 16 Friday, April 26, 2002 9:14 AM

Table Note

Legend:

Range of keyboard play

Playable range (when receiving MIDI data)

Range transposed to nearest octave (when receiving MIDI data or using the keyboard???s transpose function)

(1)The received MIDI data is played one octave lower

(2)The received MIDI data is played one octave higher

16

42-4056.fm Page 17 Friday, April 26, 2002 9:14 AM

/+&+"+/2.'/'06#6+10"%*#46

MIDI Implementation Chart

*2: If MAIN VOLUME is set to 0 or 1, V (velocity) is set to 75. If MAIN VOLUME is set to 2or higher, V is set to 100.

*4: Depends on GM tone map setting. See ???Changing MIDI Settings??? on Page 11.

17

42-4056.fm Page 18 Friday, April 26, 2002 9:14 AM

Specifications

18

52'%+(+%#6+105

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

42-4056.fm Page 19 Friday, April 26, 2002 9:14 AM

016'5

Notes

19

42-4056.fm Page 20 Friday, April 26, 2002 9:14 AM

Limited One-Year Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under nor- mal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized Ra- dioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS

WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE

NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RE-

SPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-

MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT

NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROP-

ERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM- AGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of inci- dental or consequential damages, so the above limitations or exclusions may not apply to you.

In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law:

(a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alter- ation, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a Ra- dioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

12/99