Model???PTC20LD

16:10 DIGITAL LCD-TV-Monitor

19 Hi-Definition LCD Flat Panel TV w/Built-in DVD Player

OPERATING MANUAL

Contents

3

3

5

7

7

7

8

9

9

9

10

10

10

11

11

12

14

16

17

17

20

22

22

1

Contents

2

PREFACE

Thank you for buying this TV ! Please read this manual thoroughly before operating the monitor. Make sure the monitor was not damaged in transit. Should the monitor is damaged, do no install it and contact your dealer. Check that you have all the accessories according to the model.

SAFETY PRECAUTIONS

Preparation

Put the monitor on a stable surface.

Do not use the monitor with others fixations than those provided or suggested by the manufacturer.

20cm

Do not place any material on the monitor.

Do not block or cover the ventilation openings on the monitor

If you have a wall mount, check that it is steady

Power source

The monitor must be plugged with a tension source of 110 volts and 60 Hz.

Connexion cables

Power cord and cables must be properly routed and protected to prevent people from stepping on them and causing the monitor to fall.

3

Heating sources and humidity

Keep the monitor dry and away from humidity.

Keep the monitor away from heat sources

Cleaning and maintenance

Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor.

Only clean the monitor with a soft and dry cloth.

In case of troubleshooting, do not use spare parts other than those suggested by

the manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or other incidents.

Departure in holidays

Unplug the LCD during lighting storms or when unused for long periods of time.

4

Front , Back , Connections of LCD

Front View

IR ON/ OFF LED

Back View and Control Connections

5

Side View

DVD Player Control

DVD Function Keys

???EJECT DISK BUTTON

???PLAY / PAUSE

Disc Slot inside

(Label side toward user)

6

TV INSTALLTION DRAWINGS

CONNECTION ANTENNAS

OUTDOOR

ANTENNA

AMPLIFIER

INDOOR

ANTENNA

AMPLIFIER

75 OHM

ANTENNA

PLUG

POWER PLUG OF

ANTENNA

AMPLIFIER

To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.In case of signal of closed circuit TV,

VIDEO CONNECTION

HDMI

S VIDEO CONNECTION

HDMI

7

PCINPUT CONNECTION

HDMI

8

Menu Operation

1.Connecting to the AC input cable then press the main power switch to switch ON LCD TV. At this time the TV will enter standby mode and indicator show red.

2.Use POWER button can turn ON LCD TV from standby mode.

1.Press POWER button or button on the remote control to enter standby mode. The indicator is red.

2.Using main power switch turns off LCD TV completely.

Press MENU to display the main menu.

Press / repeatedly to select the SET MENU. Use / and / to select LANGUAGE.

Press and button to select your desired language. When you are satisfied with your choice, press the MENU to exit.

1.Press VOL+/- to adjust the volume.

2.If you want to switch the sound OFF , press the MUTE .

3.You can cancel this function by pressing MUTE or VOL+.

9

Menu Operation

-Press the MENU button to display the main menu.

-Use / / / buttons to select and adjust the available menus.

The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation.

Press CH+ to increase channel number.

Press CH - to decrease channel number.

You can select the channel number by pressing 0 to 9 or -/--.

To select 1-digit channel (e.g. Channel 5): Press the 5 button.

To select 2-digit channel (e.g. Channel 20): Press the -/-- button repeatedly to display -- then press 2, follow by 0.

To select 3-digit channel (e.g. Channel 103): Press the -/-- button repeatedly to display -- then press 1, follow by 0, follow by 3.

You can select the input source by pressing the INPUT on the remote control or on the front panel.

10

Menu Operation

Ch

Video 1

Video 2

Video 3

Video 4

Video 5

Video 6

In this manual, the OSD ( On Screen Display) may be different from your TV??? s because it is just example to help the TV operation.

1.Use / to select what you want to adjust in the

Picture menu.

2.Press and button to adjust.

3.When you are satisfied with your adjustment, press MENU to exit the main menu.

Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE menu. You may select the picture mode directly by pressing the PMODE button on the remote control.

Press / button and then use / to adjust the contrast of the picture.

Press / button and then use / to adjust the brightness of the picture.

Press / button and then use / to adjust the sharpness level of picture.

Press / button and then use / to adjust the color saturation.

Press / button and then use / to adjust the tint of picture.

Press ???/??? to select the ratio of picture display such as Normal/ Zoom/ Wide and Cinema.

11

Menu Operation

1.Use / to select what you want to adjust in the

Audio menu.

2.Press and button to adjust.

3.When you are satisfied with your adjustment, press MENU or EXIT to exit the main menu.

You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND menu. You may select the sound mode directly by pressing the SMODE button on the remote control.

Press ??? / ???to select one of the audio language such as English/ French and Spain, but the condition is that the program system has included the language code.

Press / button and then use / to increase or decrease the level of the lower-pitched sounds.

Press / button and then use / to increase or decrease the level of the higher-pitched sounds.

Press / button and then use / to adjust the audio output between left and right speakers.

Press ??? / ??? to select the one of mode of the digital audio output such as PCM and RAW.

1.Use / to select what you want to adjust in the

Setup menu.

2.Press and button to adjust.

3.When you are satisfied with your adjustment, press MENU to exit the main menu.

Press Enter key to select Air, Cable, Cable HRC, Cable IRC or Cable Auto.

In DTV mode, you can tune manually and adjust the angle, orientation of the antenna etc

12

Menu Operation

Press ??? / ??? key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press Enter key to enter your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically saved as below:

Autoprogram Menu

When the channels are found, use / to add it to the channel list.

Press Enter button to display a channel list that you can select channel as below:

Manual Channel Set Menu

To Move Enter To Select M enu To Exit

Allows you to name the channel that is selected. Use ??? / ??? to move the cursor and use ???/??? to input the name and then press Menu or Enter to return or exit as following:

Channel Labels Menu

To select language of the OSD such as English/ French and Spain

13

Menu Operation

1.Use / to select what you want to adjust in the

Feature menu.

2.Press and button to adjust.

3.When you are satisfied with your adjustment, press MENU to exit the main menu.

Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.

Time Set Menu

You can select one of auto and manual to set the time. When selected auto, the item of year/date and time will be disabled and can not to adjust. When select the manual mode, you can press ???/??? and ???/??? to set the corresponding functions.

Press ???/??? to select the time zone such as Pacific/ Alaska/

Hawaii/ Eastern/ Central/Mountain.

Press ???/??? to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min /60min/90min and OFF.

14

Menu Operation

-Noise Reduction--Spatial: press Enter to select on or off.

-Noise Reduction--Speckle: press Enter to select on or off.

-Noise Reduction--Temporal: press Enter to select on or off.

-Auto Contrast Enhancement: press Enter to select on or off.

-Color Temperature: press Enter to select one of Normal/Cool and Warm.

-3D Y/C: press Enter to select on or off.

-Adaptive Contrast: press Enter to select on or off.

-Setting: press Enter to return to the factory setting.

Press Enter to enter the Enter Old Password menu, and then input the number of 0-9 as below, and you can change the password when you input the new one twice.

Enter Old Password

Press Enter to enter the sub-menu and then uses the 0-9 to enter the correct password.

Candlan Rating Menu

This item allows you to set the closed caption, and press Enter to enter Closed Caption Options menu as below:

Digital Closed Caption

15

Menu Operation

-Style: press Enter to select one of Automatic and Custom, when you select automatic, the others are disable and can not be adjusted.

-Size: press Enter to select one of Normal/Large and Small.

-Font: press Enter to select one of Default and from Font1 to Font7.

-Text Color: press Enter to select one of Red/Green/Blue/Yellow/Magenta/Cyan/Black and White.

-Text Opacity: press Enter to select one of the Solid/Flashing/Transparent/Translucent.

-Background Color: press Enter to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.

-Background Opacity: press Enter to select one of the Solid/Flashing/Transparent/Translucent.

-Edge Effect press Enter to select one of the None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.

-Edge Color press Enter to select one of the Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.

1.Use / to select what you want to adjust in the

Feature menu.

2.Press and button to adjust.

3.When you are satisfied with your adjustment, press MENU to exit the main menu.

Press / button and then use Enter to enter the VGA set menu as below:

VGASetting-1024x768@70Hz

Press / button and then use / adjust the horizontal position of the picture.

Press / button and then use / adjust the vertical position of the picture.

Press / button and then use / to adjust the phase of the picture.

Press / button and then use / to adjust the clock of the picture.

16

Menu Operation

-Position This function is to adjust the picture to Left/Right and Up/Down as you prefer..

Press / button and then use / to do auto adjust that automatically adjusts the available options for the best viewing configuration.

Press Enter to do preset that can return to the factory setting.

1.Use / to select what you want to adjust in the

Feature menu.

2.Press and button to adjust.

3.When you are satisfied with your adjustment, press MENU to exit the main menu.

Press / button and then use Enter to enter the VGA set menu as below:

Component Setting-720x480I@30/29.97Hz

17

Menu Operation

Press / button and then use Enter the time set menu as below that allows you to set the time the TV will display.

Press ???/??? to select the amount of time before your TV turn off automatically and press the Enter that can select the 30 min /60min/90min and OFF.

Press Enter to enter the advance video menu.

Advanced Video Menu

18

REMOTE CONTROL

Remote control instructions

Switch on LCD TV when at standby mode or vice versa.

Press to mute the sound. Press again or press VOL+ to unmute.

Press to cycle through the input source in following: Ch Video1 Video2 Video3 Video4

Video6 Video5

Press repeatedly to cycle through the available video picture modes.

Press to cycle through the different sound settings.

Audio selection button.

Lets you select amount of time before your TV turn itself off automatically.

Press 0-9 to select a TV channel directly when you are watching TV. The channel change after 2 seco- nds.

-/--

Press this button to enter a program number for multiple program channel such as 2-1,etc.

Return to the previous channel viewed.

19

Brings up the main menu to the screen.

Closed caption button.

MTS

Clears all on-screen displays and returns to TV viewing from any menu.

Press to display the source and channel???s info- rmation.

MENU CCD EXIT DISPLAY

Allows you to navigate the on-screen menus and adjust the system settings to your preference.

Press to scan through channels. To scan quickly channels, press and hold down either +/-button.

Press to increase / decrease the sound level.

VD SETUP ZOOM EPG D. DISPL

DVD ZOOM.

Display Electronic Program Guide.

DVD DISPLAY

To display subtitle in DVD mode.

20

MTS

MENU CCD EXIT DISPLAY

PLAY/PAUSE

Fast backward key.

Fast forward key.

Jump to previous track.

Jump to next track.

DVD THUMB STICK/OK.

DVD STOP

OPEN/CLOSE

21

Battery Usage Caution

a)Open the cover

b)AA size batteries, When inserting the batteries, make sure correct polarities as per???+???and ???-???marks on the batteries and within the battery compartment

c)Replace the battery cover

To prevent battery leakage which may result in bodily injury or damage to the remote:

1.Install all batteries correctly, and as marked on the remote control. 2.Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc) Remove batteries when the remote is not used for a long time.

ACCESSORIES

1Adapter Plug

2One Remote Control

32 Batteries 1.5V

4One User Manual

22

THE DVD SETUP MENU SYSTEM

8.1 Basic Operation

1.Press TV/DVD button on the remote controller or DVD button on the TV set to turn on ( or off ) DVD .

2.Press OPEN / CLOSE button to load disc into disc tray.

3.Press OPEN / CLOSE button to close the tray.

Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position.

8.2 DVD Setup Mode

??Setup Mode provides the menu for the configuration of General Setup Page, Speaker Setup Page, Dolby Digital???Setup ,Video Setup Page and Preference Page .

??Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP button and the OK button.

??Press the SETUP button first , enter into SETUP menu, then press the DIRECTION RIGHT button, you can enter into the next Sub-menu.

??Press the SETUP button again to exit the Setup Menu.

8.2.1 General Setup

TV Display

??PS

This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown on the screen, but with some parts cut automatically.

??LB

This is selected when the player is connected to a normal TV. Wide-screen images are shown on the screen, with black belt on the top and bottom.

??Wide

This is selected when the player is connected to a wide-screen TV.

Angle Mark

This only works when there is an angle mark on the disc. Select ON, the screen shows the mark when playing DVD.

??ON

??OFF

23

OSD Language

This is used to select the OSD language.

??English ??French ??Spanish

Screen Saver

Start the screen saver, the screen saver image will appear when the player stops or the picture is frozen for a few minutes. This saver can keep the screen from being damaged.

??On (Start the screen saver) ??Off (Remove the screen saver).

24

8.2.2 Speaker Setup Page

Downmix

??LT/RT

A disc recorded multi channel soundtrack, the output signal will be incorporated to left and right channel.

??Stereo

A disc recorded multi channel soundtrack, The output signal will be incorporated to stereo.

8.2.3 Dolby Digital Setup

Dual Mono

This is used to select the Stereo, L-MONO, R-MONO and MIX-MONO.

25

Dynamic

This option is used to set the compression ratio in order to control the sound (Vume) contrast.

8.2.4 Video Setup

Sharpness

This option is used to set the sharpness level of the sharpness of the video output

??High ??Medium ??Low

26

Brightness

User can set the level of brightness for the image displayed. is ranged from -20 to 20.

Contrast

User can set the level of contrast for the image displayed. It is ranged from -16 to 16.

27

8.2.5 Preference Setup

You must press STOP twice to enter Preference Page

TV Type

??PAL

This is selected when the player is connected to an PAL System TV.

??MULTI

The player will set the TV system according to the disc in the tray.

??NTSC

This is selected when the player is connected to a NTSC System TV.

28

Audio

If a language listed below is recorded on the disc, you can play the sound in such language. If not, the language recorded will be used.

??English

??French

??Spanish

??Chinese

??Japanese

??German

??Duch

??Italian

Subtitle

If a language listed below is recorded on the disc, you set the subtitle to be displayed in such language. If not, the language recorded will be used.

??English

??French

??Spanish

??Chinese

??Japanese

??German

??Duch

??Italian

29

Disc Menu

If a language listed below is record on the disc, you can set the Menu to be displayed in such language. If not, the language recorded will be used.

??English ??French ??Spanish ??Chinese ??Japanese ??German ??Duch ??Italian

Parental

When playing disc with parental lock function, you may select an Age Control Grade according to grade of disc and your own preference. For example, if PG is selected, DVD Video disc rated higher than the PG grade cannot be played.

??KID SAFE

??G

??PG ??PG 13 ??P GR

??R

??NC 17

??ADULT

30

Password

User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function.

NOTE:(Default password is 3308 )

Default

User can load the original factory setting by choose RESET and press OK button .

31

TROUBLESHOOTING AND ADVICE

Before calling our SAS centre, please check if you can solve the troubleshooting by yourself.

32

SPECIFICATIONS

This manual is only for your reference, any change to the design and specification will not be advised.

33