user manual

RTD316W

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

Ventilation

You must adequately ventilate the product. Make sure there is adequate space around

ventilation. See diagram.

7 cm

10 cm10 cm

FCC Information

THE LIGHTNING FLASH AND ARROWHEAD

WITHIN THE TRIANGLE IS A WARNING

SIGN ALERTING YOU OF "DANGEROUS

VOLTAGE" INSIDE THE PRODUCT.

THE EXCLAMATION POINT WITHIN THE

TRIANGLE IS A WARNING SIGN ALERTING

YOU OF IMPORTANT INSTRUCTIONS

ACCOMPANYING THE PRODUCT.

Important Information

Important battery information

new and old batteries. Do not use rechargeable batteries.

observe the polarities indicated inside the battery compartment. Replace only with

echarge them.

a long period of time, remove the batteries.

CAUTION

controls or adjustments or performance of procedures other than those

open covers and do not repair yourself.

liquids, such as vases, should be placed on the apparatus.

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiates radio frequency energy and, if not installed

10 cm

7 cm

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USERSERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED

Please respect the environment and prevailing regulations. Before you dispose of batteries or accumulators, ask your dealer whether they are subject to

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil num??rique de la class B est

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be

and on, the user is encouraged to try to correct the interferebce by one or more of the following measures:

This product complies with DHHS Rules 21 CFR Subchapter J. Applicable at the date of manufacture.

For your safety

The AC power plug is polarized (one blade is wider than the other) and on

power outlets one way. If the plug won???t go into the outlet completely, turn the plug over and try to insert it the other way.

SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT

EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.

WARNING: MAINS PLUG IS USED AS DISCONNECT DEVICE AND IT SHOULD

REMAIN READILY OPERABLE DURING INTENDED USE. IN ORDER TO

DISCONNECT THE MAINS PLUG FROM MAINS COMPLETELY, THE MAINS PLUG

SHOULD BE DISCONNECTED FROM THE MAINS SOCKET OUTLET COMPLETELY.

special recycling and if they will

accept them for disposal.

Illustrations contained in this document are for representation only.

Important Safety Instructions

Please read and save for future reference

Some of the following information may not apply to your particular product; however, as

conforme ?? la norme du NMB-003 du Canada

WARNING

placed on the apparatus.

???Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for

AUDIO IN

unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This Home Theater has earned the ENERGY STAR.

electrician to change the outlet, or use a

safety feature.

Removing the power plug is the only way to completely remove power from your product. Make sure the power plug remains easily accessible.

Note:

This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, this player cannot play the disc. The Region number for this DVD player is Region 1.

Service information

This product should be serviced only by those specially trained in appropriate servicing techniques.

Main plug is used as the disconnect device, it shall remain operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the main plug of the apparatus shall be disconnected from the mains socket outlet completely.

Caution

Invisible laser radiation when open. Avoid

DVD copy protection

In accordance with the DVD standard, your DVD player is equipped with a Copy Protection system, which can be switched on

make any recording of the relevant DVD disc onto a videotape of very poor picture quality, or even impossible. This product

incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright

with any electronic product, precautions should be observed during handling and use.

???Read these instructions.

???Keep these instructions.

???Heed all warnings.

???Follow all instructions.

???Do not use this apparatus near water.

???Clean only with dry cloth.

???Do not block any ventilation openings. Install in accordance with the manufacturer???s instructions.

???Do not install near any heat sources such as radiators,heat registers, stoves, or other

outlet, consult an electrician for electrician for replacement of the obsolete outlet.

???Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

???Use only with the cart, stand, tripod, bracket,

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

???Unplug this apparatus during lightning storms or when unused for long periods of time.

???

Servicing is required when the apparatus has been damaged in any way, such as power-supply

It is important to readthis instructi

exposure to beam. Class 1 laser product.

technicians to prevent accidents caused by the laser beam.

Reverse engineering or disassembly is prohibited.

Portable Cart Warning

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped

Important Safety Instructions

Connections and Setup

Additional safety information

??? Apparatus shall not be exposed to dripping

liquids, such as vases, shall be placed on the apparatus.

???

product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet

vent openings.

???Do not place lighted candles, cigarettes, cigars, etc. on the product.

???Connect power cord only to AC power source as marked on the product.

???Care should be taken so that objects do not fall into the product.

???Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.

If your product operates on batteries, adhere to the following precautions:

A.Do not mix old and new batteries.

B.Do not mix alkaline, standard (carbon-zinc), or rechargeable (NiCd, NiMH, etc) batteries.

C.Any battery may leak electrolyte or explode

to charge a battery not intended to be recharged.

D.Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury. When discarding batteries, be sure to dispose of them in the proper manner, according to your state/provincial and local regulations.

E.Battery shall not be exposed to excessive

Positioning speakers

Courtesy Dolby Laboratories

1. Left, Right (Front Speakers)

Front speaker placement

For best results, follow the speaker placement below.

Alignment

Align the center speaker evenly with (A) or slightly behind (B) (the left and right speakers), but not ahead of them.

Front speakers carry primarily music and

Angle

AB

2. Center

In surround mode, the center speaker carries most of the dialog as well as music and

It should be set between the left and right speakers.

3. Surround (Rear Speakers)

The surround speakers??? overall sound balance should be as close as possible to the front speakers. Proper placement is vital to establish

4. Subwoofer

A subwoofer is designed to reproduce

Place the left and right speakers to form a 45-degree angle with your favorite viewing position to duplicate the soundtrack mixer???s perspective.

Height

The three front speakers should be as close as possible to the same height. This often requires placing the center speaker directly on top (A) or beneath (B) the TV set.

A

Things to consider before you connect

???Ensure that the mains supply in your house sticker located on the back of your unit.

???Install your unit horizontally, away from any

stron

The components of this unit are sensitive to heat. The maximum ambient temperature should not exceed 35??C/95??F.

???Leave enough space around the unit to allow adequate ventilation: 10 cm/4 inches on either side and above the top, and 5 cm/2 inches at the rear.

One external AM loop antenna

???The humidity of the room should not exceed 75%. If you have to use the unit outdoors, do not expose it to rain or splashing water. The apparatus should not be exposed to dripping or splashing and no

objects led with liquids, such as vases, should be placed on the apparatus.

???Moving the unit from a cold place to a

warm one can cause condensation on some components inside the unit. Let the condensation disappear on its own before turning the unit on again.

???Before moving the unit, make sure the disc tray is empty.

powerful low bass ects (explosions, the rumble of spaceships, etc.).

Note: Front, Center speakers provided with this unit are magnetically shielded to protect your TV set. It is not recommended to place the surround speakers and subwoofer near the TV set.

B

Connections and Setup

Test tone/Channel balance

??? to listen to the audio input from the connected TV, VCR or Set Top Box.

Overview of Controls

Remote functions in DVD/CD mode

ON???OFF ??? S DVD ??? Selects the DVD mode

TUNER ??? Selects the TUNER and selects between FM/AM AUDIO IN ??? Selects the FRONT AUDIO IN mode

AUX ??? Selects the Auxiliary input (for listening to audio input from connected TV, VCR or SetTop Box)

0-9 ??? Number entry.

CLEAR ??? Quits the current setting manually from the TV screen without saving change.

INFO ??? Accesses the Info menu

TITLE ??? Accesses the title menu of DVD discs

DISC MENU ??? Accesses the disc menu during playback.

OK ???

??? To navigate through the menus. The left and right arrows also tune the radio frequency in the tuner mode.

MUTE ??? Mutes and restores the sound. SETUP ??? Enters Setup menu

RETURN ??? In DVD mode, returns to the previous menu.

VOL +/- ??? Adjusts the sound volume.

CH +/ , CH ???/ ??? Directly accesses the next or previous chapter (DVD) or track (CD). Selects programmed stations in TUNER mode

REV ??? Starts reverse accelerated play PLAY ??? Starts playing a disc

FWD ??? Starts forward accelerated play SLOW ??? Select SLOW motion function. STOP ??? Stops playback.

PAUSE ??? Freezes frame, accesses frame advance

AUDIO ??? Accesses the audio function

ANGLE ??? Accesses the camera angle function for DVD disc

ZOOM ??? Accesses the Zoom function

SUBTITLE ??? Selects the subtitle languages or tunrs subtitle

HDMI ??? Changes video output signals (480p, 720p, 1080i or 1080p)

SUBWOOFER ??? Selects among subwoofer output levels (soft/balance/strong/powerful).

RCR 192 AA4

Overview of Controls

RANDOM ??? Turns on/o??? random playback on CDDA/ wma/jpeg discs.

REPEAT ??? Accesses the repeat function.

EQ . LEVEL ??? Toggles channels for di???erent channel

level settings. Adjusts the value using VOL +/-

SURROUND ??? Changes the Surround sound setting. In DVD mode, press the button to select between Dolby Digital and Stereo modes (Dolby ProLogic is available if the input is Dolby 2ch). In the AUX IN / AUDIO IN

mode (analog input), press the button to select between Dolby ProLogic and

STEREO modes. (Refer to details on Dolby Digital and Dolby ProLogic.)

Remote control functions in tuner mode

TUNER ??? Selects the TUNER and switch between FM/AM

VOL+/??? ??? Adjusts the sound volume. MUTE ??? Mutes and Restores the sound.

TUNER +/??? ??? Tunes down and up the radio frequencies

MEMORY ??? Stores a station

CH+/??? ??? Selects programmed stations

AUDIO ??? Selects between Stereo and Mono mode for Tuner (FM)

Using remote control to navigate through the on-screen menus

Use and OK on the remote control to navigate through the on-screen displays (the DVD player???s menu, the Info Display that appears during playback, or a disc???s menu).

Use on the remote to move through on-screen menus in the direction of the arrow button (e.g., to move right, press >). The arrow buttons are used to highlight an option. Once highlighted, press OK to select the option that is highlighted.

Note: Insert 2 "AAA"("UM-4"/"R03")

batteries to the remote control prior to use.

Playing Discs - Basic Functions

Compatible discs

???DVD, DVD-R,DVD-RW, DVD+R, DVD+RW

???CD, CD-R, CD-RW

Compatible formats

???DVD, JPEG

???CD, WMA

Regional coding

Your unit has been designed to process regional management information stored on DVD discs. The regional code for your unit

is 1

will not play.

Operating the DVD receiver

1.Turn on your television set.

2.Press ON???OFF on the remote or ON/ STANDBY located on the unit???s front panel. Press DVD on the remote control.

Loading disc

1.Press on the front panel to open the disc tray.

2.Place a disc onto the disc tray with the label side up.

3.Press again to close the disc tray.

Playback

Switch the unit and the TV set on.

1.After loading a disc, playback starts automatically, or the disc menu appears. If the disc menu appears, select the Play option to begin playback.

2.Press STOP to stop playback.

Accelerated play

While the disc is playing, press REVERSE or FORWARD one or more times to vary the speed and direction of the accelerated play. Press PLAY to resume normal playback.

Pause

While the disc is playing, press PAUSE once for freeze frame. Press PLAY to resume normal playback.

Frame advance

1.Press PAUSE twice. ???Step??? is displayed.

2.Each time you press PAUSE button, the picture advances one frame.

3.Press PLAY to resume normal playback.

The Info Menu

Title/chapter (DVD)/track

(audio CD )

To directly access a title, chapter (DVD) or a track (audio CD), press INFO, press OK. Select the Title(TT), Track(TRK) or Chapter(CH) icon and enter a number directly with the numeric buttons. Press OK

Note: Many discs only have one title.

Time display

To access the Time Display, press INFO on the remote. Press the up/down buttons repeatedly to display:

DVD: Chapter elapsed time, Chapter remaining time, Title elapsed time and Title remaining time.

Audio CD: Track elapsed time, track remaining time, disc elapsed time, disc remaining time.

Audio (DVD)

Some discs have several audio tracks used for

audio formats.

To change the language or audio format during playback:

1.Press the INFO button twice.

2.Use the left/right arrow buttons to select the Audio icon, or press the AUDIO button on the remote control.

3.Choose a language or an audio format with the up/down arrow buttons.

dialog languages or audio formats. When you change the dialog language using the Info menu, it only changes the dialog language of the disc being played. When

language will revert to the one you selected in the Language Setup menu.

Subtitles (DVD)

The Info Menu

Camera angle (DVD)

1.To change the camera angle, press the ANGLE button on the remote or press the INFO button twice and select the Camera angle icon with the left/right buttons.

2.Choose the angle with the up/down arrow buttons.

If the disc was recorded using a single camera angle, this function is not available.

Play mode (all discs except WMA/jpeg)

1.While the disc is playing, press the INFO button twice for CD and three times for DVD.

2.Select the Play Mode icon using the left/ right arrow buttons.

3.Use the up/down arrow buttons to select an option.

Creating a Program List for Program Play Mode (Audio CDs and DVD discs)

create a program list.

1.To create a program list, press the INFO button twice for CD and three times for DVD. Highlight the Play Mode option and press the up arrow to select the Program option.

2.Press OK. The Program screen is displayed.

the number buttons on the remote to enter a track number. As for DVD discs: T stands for Title while C stands for Chapter. As for Audio CDs: T stands for Track.

4.Use the arrow buttons to move to the next spot in the list. Enter the next track number.

5.Continue entering tracks until you have completed your list.

6.Highlight the Play option at the bottom of the screen and press OK or press PLAY to start playback. The program list will play in the order you programmed it.

The Info Menu

To stop program play, press STOP or select Standard from the Play Mode option in the INFO display.

If you want to cancel the list, repeat steps 1 and 2 to select CLEAR and press OK.

Sleep

1.Press INFO twice for CD and three

times for DVD. Select Sleep icon with the left/right arrow buttons.

2.Select one of the available options using

the OK

Note: This function is not available in AUX/AUDIO IN/TUNER mode.

Introscan (CD)

each track on a CD.

Radio

The unit has a built-in tuner that allows for FM radio function. The AM loop antenna allows for AM radio function.

Manual tuning

1.Connect the FM antenna and the AM loop antenna at the back of the unit. Rotate the AM loop for better reception.

2.Press TUNER.

3.Tune a station by pressing TUNER+/- repeatedly until the desired station is found. Alternatively, you can press and hold the same buttons down for about one second to activate the automatic search function. In this mode the unit will

automatically tune frequencies until it station.

4.Repeat step 3 to tune to another radio station.

5.Press TUNER to toggle between FM and AM.

Storing radio stations

The unit can store up to 30 radio stations in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in

Radio

Tips:

???When the FM station broadcasts Stereo sound is found, ST is displayed.

???When you manually tune into a weak FM station, press AUDIO on remote control to switch from Stereo to Mono mode. This will reduce the background noise.

???If there is any interference, change the antenna???s position until ideal sound reception is obtained. TV and other electronic devices could be the cause

of interference, so try to position the antenna away from them.

???

???Automatic preset programming???

antenna for better reception and a

AUDIO IN/ AUX IN

TV, VCR or Set Top Box can be connected to AUX input jacks at the back of the unit or AUDIO IN at the front panel so that sound from the auxiliary component comes into the unit and out through the speakers.

Connecting auxiliary components

Refer to ???Connecting to external audio sources ??? for details on connecting the auxiliary components to the unit.

Selecting AUDIO IN/AUX IN mode

Press either SOURCE on the main unit or AUX / AUDIO IN on the remote control to select AUX IN or AUDIO IN mode

Sound output in Aux-In mode

???You may change the surround setting by pressing SURROUND to select between Dolby ProLogic and Stereo modes.

???If the auxiliary audio signal is mono, there is no output from speakers in either Dolby ProLogic or Stereo mode.

To directly access a location on the disc which does not correspond to the start of a title or chapter, press INFO once and press OK, highlight the Time Display icon using the arrow buttons, then enter a time with the number buttons (hh:mm:ss) and

press OK.

Note: Time display function may not be available on all discs.

Subtitles as follows:

1.While the disc is playing, press INFO twice, then select the Subtitles icon using the left/right arrow buttons.

2.Select a language using the up/down arrow buttons.

or press SUBTITLE on the remote.

When you change the language of the subtitles using the Info menu, it only applies to the disc currently being played. When you

subtitles will default to the subtitle language you selected in the Languages menu.

This function may not be available on all discs.

4.To stop repeat playback, select the Play Mode icon and use the up/down arrow buttons to choose the Standard option.

Creating a program List for program play mode (WMA CDs)

To use program play mode with a WMA disc,

program up to 16 songs.

1.To create a program list, press the INFO button twice. Highlight the Play Mode option and press the down arrow to select the Program option.

2.Press OK. The Program screen is displayed.

3.The F stands for Folder, and the T stands for Track. Highlight the space below the Folder indicator (F) and use the number buttons to enter the desired folder number.

4.Use the arrow buttons to move to the space beneath the Track indicator (T). Use

the number buttons to enter the track number

5.Repeat steps 3 and 4 until you have completed your list.

6.Highlight the Play option at the bottom of the screen and press OK or press PLAY to start playback. The program list will play in the order you programmed it.

Bookmark (DVD and audio CD)

1.Press INFO twice for CD and three

times for DVD. Select the Bookmark icon with the left/right buttons, and press OK.

2.

Press OK to set the bookmark. The book mark is saved and is indicated by the

bookmarks on a disc.

3.To start playback from a bookmark, press the PLAY button on the remote.

4.To delete a bookmark, highlight it and press CLEAR.

Note: This function is only available with discs whose elapsed time or remaining time appears in the Info menu.

ascending order.

Automatic preset programming

1.Press TUNER to enter the Tuner mode.

2.Press and hold TUNER for two seconds to start automatic preset programming.

3.Radio frequencies will be browsed and radio stations stored automatically. When all the available radio stations are stored or all 30 memory locations are full, the auto preset programming function

will stop.

Manual preset

1.Tune to a radio station (see ???Manual tuning??? for details).

2.Press MEMORY. While the Program Preset

preset number using the numeric buttons, then press MEMORY to store it.

Retrieving preset stations

1.Press TUNER to enter the Tuner mode.

2.Press CH +/- to search up or down for the preset stations or directly press the numeric buttons.

WMA Files and jpeg Files

compresses recorded music. The main advantage of the mp3/WMA format is that CD-quality music tracks can be stored on a personal computer in user friendly

they have a resolution of less than 2 megapixels.

1.Open the disc tray.

2.Place the disc with the printed side facing up and close the disc tray.

The folders on the disc will be listed in numerical order on the left side of the screen. When you highlight a folder, then press OK button. The list of songs or pictures in the folder are listed in numerical order on the right side of the screen.

3.Select a folder using the up/down arrow buttons on the remote, then press the left arrow button to move to the music/picture icons at the bottom of the screen. Use the left/right arrow buttons to select either music or picture mode.

4.Press the up arrow button to move to the the up/down arrow buttons to select a

???

subfolders contained in the same folder. The unit then plays the contents of the folders at the same level as the folder

???

subfolders located in the same folder. You can set the amount of time a picture remains on the screen in the General Setup menu.

WMA Files and jpeg Files

The Setup Menu

The Setup Menu

The Setup Menu

Additional Information

Additional Information

During the slide show you can use the left/right button to rotate the picture, the

up arrow button to rotate the image vertically, the down arrow button to rotate the image horizontally. Use the ZOOM button to magnify the picture. Use the CH- button to go back to the previous picture or the CH+ button to go to the next one, and the STOP button to interrupt the slide show and display the disc???s contents.

5.Press INFO to display the Info menu during

playing, press INFO two times and select the Play Mode icon using the left/right arrow buttons. Press the up/down arrow button to select a play mode (Standard, Random, Program, Repeat Folder, Repeat Disc and Repeat Track), and press OK.

6.

music or slide show stops and the disc???s contents are displayed again.

7. Press STOP to end playback.

Notes:

???

playback simultaneously.

???The time taken for the contents of the disc to be displayed varies according to

disc. If nothing is displayed after a few

another disc.

???Before inserting a disc, make sure it is compatible with the unit.

There are four options in the main setup menu: General Setup, Language Setup, Audio Setup and Video Setup.

Press SETUP to bring up the main menu. Select one of the menu icons across the top of the screen using the left/right arrow buttons. The menu???s options are displayed on the left side of the screen. Press the right arrow button to move to the option???s choices on the right. Press SETUP if you want to exit setup.

General Setup

General Setup

Video

HDMI Setup

TV Type

Default

Video

Progressive Function provides high quality

Progressive Scan if you used the Component Video jacks of the unit to connect a TV or monitor compatible with a progressive

scan signal.

Select P-Scan YPbPr and press OK to activate Progressive Scan.

HDMI Setup

This lets you select the resolution of the player's output according to the connected

???Supported HD JPEG mode: 480p, 720p, 1080i and 1080p.

ratio) best suited to the format of your TV screen:

???4:3 PS: reproduces a 4:3 picture without distortion

???4:3 LB: gives best reproduction of pictures recorded in this format (i.e. with horizontal bands at the top and bottom of the screen) or in 16:9.

???16:9 (widescreen): reproduces 16:9 format

Default

This option allows you to return the unit???s settings to the original factory settings. Any changes you have made to the unit???s settings will be reverted back to the original settings

IMPORTANT!

Once Progressive Scan has been activated, an image will only be visible on a progressive scan TV or monitor. If you choose this option and you don???t have a progressive scan TV or monitor, you may get a picture with incorrect color or no color

Language Setup

With this menu, you can set the language for unit menus, dialog, subtitles and the disc menus.

If you chose ???English??? during initial set-up, any menus generated by the disc are in

English, and so is the language of the dialogs (if this language is available on the disc).

Language Setup

Player Menu

Audio

Subtitles

Disc Menu

1.Select the Language Setup icon in the main menu using the left/right

arrow buttons.

2.Select one of the options using the up/ down arrow buttons.

3.Press the right arrow button to move to the language choices.

4.Use the up/down arrow buttons to highlight the language of your choice and press OK.

Player Menu

Select the language of player menus and press OK.

Audio

Select the dialog language using up/down arrow buttons and press OK.

To change the Audio language during playback, press INFO twice for DVD and use

the left/right arrow buttons to highlight the Audio icon.

Press the up/down arrow buttons or AUDIO on the remote control to select audio language.

Subtitles

Select the subtitle language using up/down arrow buttons and press OK.

To change the language of the subtitles during playback, press INFO twice for DVD and use the left/right arrow buttons to highlight the Subtitle icon. Press the up/down arrow buttons or the SUBTITLE button on the remote to select a subtitle language.

Disc Menu

To change the language of the disc menus, select the language using the up/down arrow buttons and press OK.

The language you select will only be displayed if the disc is programmed with that language.

Notes:

???If the selected language is not available on a disc, the disc???s language will be used instead.

???If the language chosen is available, it is automatically selected when you display the subtitles or press SUBTITLE on the remote control. Otherwise, the subtitle language indicated on the disc is selected.

Audio Setup

You can adapt your unit to other equipment and access spe Setup menu.

1.Select the Audio Setup icon in the main menu using the left/right

arrow buttons.

2.Select an option using the up/down arrow buttons. Press the right arrow to move to the option???s choices.

Audio Setup

Night Mode

Center Delay

Rear Delay

Test Tone

Night Mode

You can use this function to control the

It improves the quality of the sound track at a low volume, and quiets the loudest sounds. You can choos

Distance

Basic settings have been preset for the speakers included with your unit. However, to suit the acoustic conditions in your listening room and to make the sound more ctive, you may need to delay the signal coming from some of the speakers. Channel delay compensates for center or surround speakers that are closer to the listening position than the front speakers.

1.Highlight a distance option using the up/ down arrow buttons.

???Center (CT Distance)

???Surround (SL/SR Distance)

2.Press the right arrow button to move to the default distance.

3.Press the up/down arrow buttons to adjust the distance.

Test Tone

This function is used to test the speaker setting. A short noise comes successively from each speaker.

Video Setup

1.Select the Video icon in the main menu using the left/right arrow buttons.

2.Select a menu option using the up/down arrow buttons and press OK.

Video Setup

Brightness

Contrast

Saturation

Slide Time

Slide Time

The Slide Time option lets you select the amount of time a picture is displayed in a slide show. The choices are 5 seconds, 10 seconds, or 15 seconds.

Troubleshooting

The unit does not switch on.

???Make sure it is plugged in.

???Press the ON???OFF button on the remote control or the ON/STANDBY button on the front of the unit.

???

when it is in STOP mode for more than 30 minutes without any user intervention. Switch it on again.

???It might be impossible to read the disc.

???Insert the disc with the printed side facing up.

???Check that the disc can actually be played by this device .

???Check that the disc???s regional code matches the unit???s regional code. This unit???s regional code is 1.

???Clean the disc.

There is no picture.

???Check you have switched on the TV set.

???Check the connections

???Select the AV input assigned to the unit on the TV.

???Replace the HDMI cable with a better one. Bad HDMI cable can cause data lost.

???Press HDMI key on remote handset several

The picture is of poor quality (with snow or lines).

??? Check the connections

There is no sound or the sound is of poor quality.

???Check the connections

???Make sure the speakers are connected.

???Make sure the MUTE function is not on.

No surround sound.

???

Setup menu (See Positioning speaker or Audio Setup).

???

The remote control does not work or works only intermittently.

???Check that batteries are inserted or change them.

???Aim the remote control at the unit. The infrared beam must not be blocked

or interrupted.

???Check that the remote control is

trying to operate with it.

The subtitles do not appear.

???Check that the DVD disc provides subtitles.

???Refer to the section on how to display subtitles.

The disc menu language is not the correct one.

???The disc menu language has not been set up.

???The language of your choice is not available on the disc .

Precautions

Use

???If your unit has been stored in a cool place for any length of time, during a journey for example, wait for about 2 hours before using it.

???The openings located on the top and bottom are for ventilation and must not be obstructed.

???During thunderstorms, we recommend that you isolate the unit from the electrical supply so that it is not damaged by electrical or electromagnetic surges.

???This unit is designed for continuous use.

does not disconnect it from the mains supply. To completely isolate the equipment, remove the plug from the mains jack as some components remain connected to the electrical supply.

???If you notice any burning or smoke, disconnect the unit immediately to avoid any risk of electrocution.

???Do not attempt to look inside the unit through the disk tray opening or any other opening. You may be electrocuted or exposed to laser radiation.

???This unit is for domestic use only and must not be used for industrial purposes.

???Total or partial copying of recordings protected by copyright legislation, without the explicit permission of the holder of the rights, contravenes current legislation.

sale or any other business purpose constitutes or could constitute a violation of copyright law.

Cleaning

???Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.

???Using solvents, abrasive or alcohol-based products risks damaging the unit.

???If an object or liquid enters inside the unit, unplug it immediately and have it checked by an authorized servicer or service center.

Handling and caring for discs

???Handle your discs with care. Hold the disc the hole.

???Insert the disc with the label facing up (for a single-sided disc).

???Place the disc properly into the tray in the allotted holder.

???Use a soft cloth to clean discs if necessary, always wiping from the centre to

the edge.

???Always put discs back in their cases after use and store in a vertical position.

???Do not close the tray with two discs in it or with a disc not sitting correctly in the holder.

???Do not play cracked, chipped or warped discs nor try to repair them with adhesive tape or glue.

???Do not write on a disc.

???Do not move the unit when a disc is being played.

???Do not scratch discs or store them in places exposed to direct sunlight, high humidity or high temperatures.

???Do not use aerosol cleaners, benzene, anti-static liquids or any other solvent for cleaning discs. When cleaning, wipe gently with a soft damp (water only) cloth from the centre to the edge, avoiding circular motions, which could cause scratches and interference during playback.

Additional Information

Compatible Formats

In order to ensure playback, discs must conform with DVD or CD

standards. This unit may not play some

recording formats, software used and disc types.

DVD-Video

Digital video discs - 12 cm, single or double sided, single or dual layer. DVDs are high density optical discs on which high quality picture and audio are recorded by means of digital signals.

DVD-R,DVD-RW, DVD+R, DVD+RW

Most DVD-R and DVD+R (one recording only), DVD-RW and DVD+RW discs (rewritable), depending on the DVD writer and discs used.

However, depending on the condition of the CD-writer, computer and the disc used, you

playing a CD-R disc, it is normal for the unit to take up to 60 seconds to recognize the disc before starting to play.

If the disc is not recognized after a period of 120 seconds, remove the disc, and insert it again

???Do not use its full capacity.

???CD-Rs should be preferably used instead of CD-RWs (rewritable CDs) as, in certain cases, CD-RW playback may be faulty.

???Use reliable, good-quality CD write software.

???Close all other applications on the computer to ensure reliable CD-R disc recording.

CD-R and CD-RW discs containing

Additional Information

???Do not record copyright-protected mp3 code protected to prevent illegal copying.

cannot be read by this unit.

IMPORTANT!

The above recommendations do not guarantee that the unit will play mp3 recordings, or as an assurance of sound quality. Certain technologies and

on your unit (i.e. degraded sound quality and in some cases, inability of the unit to

Sound Enhancement Systems

This receiver is equipped with several built-in sound enhancement systems.

Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Prologic

The Pro Logic mode uses the built-in circuit to steer the Left, Center, Right and Mono Surround

play both stereo and Dolby Pro Logic program source, such as TV and VCR.

Additional Information

RMS Output Power: Dolby Digital Mode with 10% Total Harmonic Distortion Rear Channels: 32 Watts/channel (1kH, 4??)

Front and Center Channel: 32 Watts per channel (1kHz, 4??)

Subwoofer Channel: 40 Watts (100Hz, 3??)

Total RMS Output Power, Dolby Digital mode: 200 Watts

Muting Attenuation: 70 dB

Frequency Response: 200Hz ??? 20KHz/3dB, 1KHz ref.

Subwoofer Frequency Response: 20Hz ??? 200Hz/-3dB, 100Hz ref.

Signal to Noise Ratio: 70 dB (Dolby Digital)

AM Tuner Section:

Frequency Response: 2kHz +/-3dB, 400Hz ref.

Usable Sensitivity: 3000uV/m @ S/N 20dB

Signal to Noise: 38dB

IF Rejection: 35dB

FM Tuner Section:

Frequency Response: 15kHz +/-3dB, 1kHz ref.

Quieting: 24dB

Signal to Noise: 62dB(stereo) / 65dB(mono)

IF Rejection: 70dB

Dimensions (H x W x D mm) :

Unit: 66 x 430 x 240

Front Speakers: 112 x 88.4 x 88.2

Center Speaker: 112 x 88.4 x 88.2

Rear Speakers: 112 x 88.4 x 88.2

Subwoofer: 307 x 145.1 x 255

Limited Warranty

Your Responsibility

3)Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance, or use in violation of instructions provided with the

product, or to product which has been altered or without authorization of AVC, or to products or parts thereof which have had the serial number removed or changed.

Out of Warranty

In the event your product requires repair after the limited warranty period has expired, please contact our Customer Support Center at 1-800-506-5746, 1-877-252-6873 or

www.1800customersupport.com/RCA

Hours: Monday???Thursday: 9am???7pm, Friday: 9am???5pm, Saturday: 9am???NOON Eastern time.

Important: You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns Center.

All warranties implied by state law, including the implied warranties of merchantability andfor a particular purpose, are expressly limited to the duration of the limited warranties set forth above.

mode. Recordings using DVD+RW discs must be made in accordance with the sations for DVD+RW discs with a 4.7 GB capacity.

Audio CDs

Audio CDs (12 cm).

CD-R, CD-RW

Most CD-R (one recording only) and

CD-RW discs (rewritable).

CD-Rs written during a multisession recording can be played, provided that the session has ended before the disc is played

(depending on the write software).

R WMA discs, please follow all the recommendations for CD-R, along with the comments below:

???

format. ISO 9660 format and Joliet WMA ompatible with Microsoft???s DOS and Windows, as well as with Apple Mac.

???

and should end with the ???.wma??? extension. General name format: Title.wma

When composing your title, use 10 characters or or less, no spaces, and avoid the use of special

characters including (. , / , \, =, +).

Obtaining audio CD quality sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least 128 kB/sec. Choosing

higher rates, such as 192 kB/sec or more, only rarely produces even better sound quality. Converth sampling rates below 128 kB/sec. will not be played

the ???.jpg??? extension. Files without the ???.jpg??? extension will not be able to be read by the unit

on your computer.

CD-R and CD-RW discs

(Windows Media Audio) format. Please follow all the

recommendations for CD-R above.

You can use this mode with any stereo program source (such as VCR/TV) to enjoy multi-channel sound experience.

Dolby Digital

The Dolby Digital mode lets you enjoy full digital surround from software processed in the Dolby Digital format. Dolby Digital provides better sound quality and a more powerful presence than conventional Dolby Surround. This unit is equipped with Dolby Digital 5.1-channel so that you can enjoy enhanced full digital surround sound.

four channels (Front Left, Front Right, Centre and Rear ) are used, the new system provides stereo separation of the rear speakers (Rear- Right, Rear-Left ). Adding the to the 5 channels the subwoofer channel for bass sounds (counted as 0.1 channel) results in 5.1 channels (or 6 Channels) that bring you the most sophisticated Dolby Digital sound enjoyment.

Limited Warranty (U.S.)

AVC MULTIMEDIA(???AVC???)makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product.

One Year Parts & Labor Warranty

AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or refurbished parts and products, at AVC ???ssole discretion.

During a period of one year from the ctive warranty date, AVC will provide, when needed,

service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you mucall our Customer Support Center at 1-800-506-5746or

1-877-252-6873, during the hours listed in the box on the right. The determination of service will be made by AVC Customer Support. PLEASE DONOT RETURN YOUR UNIT TOAVC

WITHOUT PRIOR AUTHORIZATION.New or remanufactured replacements for defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the

arranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs.

The customer is responsible for all transportation charges to the service facility.

Packaging and Shipping Instruction

When you send the product to the AVC service facility you must use the original carton box and packing material or an equivalent as designated. by AVC

With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of

manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.

This warranty gives you spelegal rights and you may also have other rights, which may vary, from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.

For more information on other products and services, please visit our web site at www.1800customersupport.com/RCA

Important: Also keep your ???Bill of Sale??? as proof of purchase.

Specications and external appearance are subject to change without notice.

printed in China 811-316W91W010

properly.