CC417

USER???S

GUIDE

C A M C O R D E R

Important Safety Information

Be sure to read all the safety information before you begin to use this product.

WARNING: To reduce the risk of fire or shock hazard, do not expose camcorder or AC adapter/charger to rain or moisture.

CAUTION

RISKOFELECTRICSHOCK

DO NOT OPEN

ATTENTION

RISQUEDECHOC

ELECTRIQUENEPASOUVRIR

This symbol indicates ???dangerous voltage??? inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE

COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour ??viter les chocs ??lectriques, introduire la lame

la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond.

To reduce risk of injury, charge only rechargeable batteries recommended by the manufacturer for this camcorder. Other types of batteries may burst causing damage and personal injury.

CAUTION: Avoid operating your camcorder immediately after moving it from a cold location to a warm location. Give the camcorder 2 to 3 hours to reach a stable temperature before inserting a video cassette. When moved from a cold area to a warm location, moisture may condense on the head drum inside the machine. This moisture could cause the tape to stick to the headwheel and damage the headwheel or tape.

FCC Regulations state that unauthorized changes or modifications to this equipment may void the user???s authority to operate it.

Product Registration

Please fill out the product registration card and return it immediately. Returning this card allows us to contact you if needed.

Keep your sales receipt for proof of purchase to obtain warranty parts and service and attach it here. Record the serial and model numbers located on the bottom of the camcorder.

Model CC417

Serial No:_____________________________________________________

Purchase Date: ________________________________________________

Purchased From: ______________________________________________

i

Assistance

We want to make sure you enjoy your new camcorder. If you have any questions, call:

1

2

First-Time Operation

This section describes only the basic steps necessary to set up your camcorder to record. Refer to the other sections for detailed operation and feature options.

Assistance

The toll-free numbers are available to help you with any problem you may encounter.

Camcorder Exchange Warranty . . . . .800-283-6503

Customer Service . . . . . . . . . . . . . . . .800-336-1900

Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376

1.Unpack the camcorder and accessories.

???Save the box and packing materials in case you ever need to store or ship your camcorder.

???The items shown below are packed with your camcorder. If any of them are missing or appear damaged, contact your dealer immediately.

WARNING: LEAD-

ACID BATTERY.

MUST BE DISPOSED

OF PROPERLY.

Rechargeable 10-Volt Battery

Stock No. EP096FS

Camcorder

Model CC417

Shoulder Strap

Stock No. 227327

AC Adapter/Charger: Stock No. 221355 or 221356 DC Cable: Stock No. 209342

Caution: Do not use this adapter/charger for any purpose other than charging the EP096FL or EP096FS battery pack or supplying power to the camcorder.

3

First-Time Operation

Adapter/

Charger

BATTERY

POWER

CHARGE

DC OUTPUT

Jack

Adapter/Charger???s

DC Cable

DC IN 9.6V Jack on

Back of Camcorder

2.Attach the adapter/charger.

Since the battery must be charged before it can be used the first time, attach the adapter/charger to the camcorder.

???Attach one end of the adapter/charger???s DC cable to the DC OUTPUT jack on the adapter/charger.

???Attach the other end of the cable to the DC IN 9.6V jack on the camcorder.

???Plug the adapter/charger???s plug into an operating outlet.

???Details are on page 10.

4

First-Time Operation

POWER (CAMERA/OFF/VCR)

Switch and Indicator

VCR

OFF

OWER

Handstrap

REC/PAUSETRACKING

Lens Cap

3.Remove the lens cap and attach it to the handstrap.

4.Turn on the camcorder.

The position of the POWER

(CAMERA / O F F / V C R ) switch tells the camcorder whether you want to record (CAMERA), play back tapes (VCR), or turn off the power (OFF).

???Press and hold the small button on POWER while sliding it in CAMERA. The POWER indicator will light when the camcorder is turned on.

(continued on next page)

5

First-Time Operation

Safety Tab

Tape Window

REC (Record)

/PAUSE

Button

Lens Cap on

Handstrap

Cassette Door

Press Here to Close

5.Insert a cassette.

???Press STOP/EJECT to open the cassette compartment.

???Insert the cassette with the safety tab facing up and the tape windows facing out.

???Press the cassette down gently until it locks into place, and close the cassette compartment door.

???Details are on page 17.

6.Position viewfinder and adjust eyepiece focus control.

???Grasp the viewfinder and rotate it horizontally.

???Pull the viewfinder out from the camcorder and rotate the eyepiece into a comfortable viewing position.

Caution: Pulling on the eyepiece may cause damage to the eyepiece or camcorder.

???If the image in the viewfinder is blurry, adjust the eyepiece focus control for your vision. Details are on page 22.

6

First-Time Operation

POWER (CAMERA/OFF/VCR)

Switch and Indicator

STOP/EJECT

REC (Record)

/PAUSE

REC/PAUSETRACKING

VCR

OFF

OWER

PLAY

REW (Rewind)

Eyepiece

Eyepiece

Focus

Control

Electronic Viewfinder (Grasp Here to Move)

7.Start and stop recording.

Start and stop recording by pressing and releasing REC/PAUSE. REC appears in the viewfinder. You do not have to hold the button to record.

Notes: If you do not record within five minutes, the camcorder will automatically shut off to prevent excessive tape wear. Press REC/PAUSE to turn on the camcorder.

Any material recorded on the tape will automatically be erased if you record over it.

8.Play back what you have recorded.

???Press REC/PAUSE to stop recording.

???Press and hold the small button on POWER while sliding it in VCR.

???Press REW (rewind) to rewind the tape.

???Press PLAY to play back the tape in the viewfinder.

???Press STOP/EJECT when you are finished playing back the tape.

???Details on viewfinder playback are on page 36.

(continued on next page)

7

First-Time Operation

9. Review the camcorder???s operating controls.

POWER

(CAMERA / O F F / V C R) Switch

and Indicator

Viewfinder

Microphone

STOP/EJECT Button

Also EDIT???ADV Button

VCR

OFF

OWER

REC/PAUSETRACKING

Lens

Eyepiece

Focus

Control

Lens

Hood

VIDEO, AUDIO, and RF DC OUT

Jacks (Located Behind Small Cover)

8

First-Time Operation

9. Review the camcorder???s operating controls.

Shoulder Strap

Attachment

Ring

BATTERY

Eject Lever

BATTERY

DCIN 9. 5V

DC IN 9.6V Jack

Shoulder Strap

Attachment

Ring

Power Zoom Buttons

(W and T) also TRACKING

Buttons

REC (Record)

/PAUSE Button

Hand Strap with

Lens Cap Holder

Cassette Door

9

Powering the Camcorder

Caution: Do not attempt to use a ???power converter??? to use your AC adapter/charger on a power source other than 120 volts, 50/60 Hz, or the adapter/charger and camcorder may be damaged. If you wish to operate the AC adapter/charger on a power source other than 120 volts, 50/60 Hz, use only a transformer-type power converter. Do not use ???solid-state??? or ???switching-type??? power converters. They

will damage your AC adapter/charger. An optional CPS014 shown on page 45 is

designed for use on 100-240 volts, 50/60 Hz.

Using the Adapter/Charger to Power Your Camcorder

Plug in AC Outlet (120V, 50/60Hz)

Adapter/Charger

BATTERY

POWER

CHARGE

POWER

Indicator

1.Connect one end of the adapter/ charger???s cable to the adapter/ charger???s DC OUTPUT jack and the other end to the DC IN 9.6V jack on the back of the camcorder.

2.Plug the adapter/charger into the nearest AC outlet (120V, 50/60 Hz).

3.The POWER indicator on the adapter/charger will light when it is properly connected.

Notes: The adapter/charger cannot charge the battery and operate the camcorder at the same time. If you connect both, the adapter/charger will power the camcorder. Remove the adapter/charger???s cable from the DC OUTPUT jack to charge the battery.

When using the adapter/charger to power the camcorder, the battery level indicator may display . This indicator is used for battery operation and has no meaning when using the adapter/charger to power the camcorder.

To Remove the Adapter/Charger

1.Remove the adapter/charger???s plug from the AC outlet.

2.Remove the adapter/charger???s DC cable from the DC IN 9.6V jack on the camcorder.

Caution: Do not use this adapter/charger for any purpose other than charging the EP096FS, EP096FL, CB096FS, or CB096FL battery pack or supplying power to the camcorder.

10

Powering the Camcorder

Using the Battery to Power Your Camcorder

Charging the Battery

The battery must be charged before it can be used the first time. Charging will take approximately two hours depending on the condition of the battery. When fully charged, the battery should supply approximately 60 minutes of operating time (depending on how much you use zoom and pause). To extend the battery???s operation time, turn off the camcorder???s power when not in use.

POWER

CHARGE

CHARGE

Indicator

Plug in AC Outlet

(120 V, 50/60 Hz)

Caution: When a battery is attached to the adapter/charger, do not turn them upside down. The battery may fall off and be damaged or cause injury.

1.Attach the battery to the adapter/ charger as shown. Align the reference arrow on the battery with the arrow on the adapter/charger. Hold the battery flush against the adapter/charger and slide it in the direction of the arrow.

Note: You cannot charge the battery and operate the camcorder from the adapter/ charger at the same time. Remove the adapter/charger???s DC cable from the camcorder to charge the battery.

3.The CHARGE indicator will light while the battery is being charged. When the indicator turns off, the battery is fully charged.

4.Remove the battery from the adapter/charger by sliding the battery up and off.

5.Attach the charged battery to the camcorder as shown on the next page.

2. Plug the adapter/charger into the

11

Powering the Camcorder

Using the Battery to Power Your Camcorder

POWER Switch

and Indicator

BATTERY

Eject Switch

FOCUS

BRIGHT

Rechargeable

Battery

Hold Battery

Flush and

Slide Down

Align Arrows

Attach Charged Battery

1.Align reference arrow on battery with arrow on camcorder. Hold battery flush against camcorder while sliding it down in the direction of the arrow as shown.

2.Press and hold small button on POWER while placing it in CAMERA. POWER indicator will light if battery is properly attached.

Remove the Battery

1.Slide POWER to OFF. POWER indicator will turn off.

2.Press and hold BATTERY eject while sliding battery up and off the camcorder.

12

Powering the Camcorder

Using the Battery to Power Your Camcorder

Battery Care

???Your battery will provide better service and longer performance if you charge it before and after use, and store it at normal room temperature.

???The battery should be charged at a temperature of 32??F-95??F (0??C-35??C) to prevent damage.

???Do not operate the battery at temperatures below 14??F (-10??C) or above 95??F (35??C). The battery may be

damaged if operated at temperatures above 122??F (50??C). Operation time will decrease at extremely low temperatures.

???After repeated chargings and use, the operation time will gradually decrease. When operation time becomes too short to be useful, it is time to replace the battery.

Battery Storage

???Store the battery at normal room temperature.

???Lead acid batteries discharge if not used. Recharge the battery at least once every six months or you may not be able to recharge it.

???A battery stored for a long period may not supply power for the specified time. Additional rechargings may help restore the battery???s operation time.

Battery Safety Precautions

Batteries being recharged that have not been used for an extended period may continue to charge after the normal time. Do not charge a battery for more than 24 hours.

If both indicators on the adapter/ charger start flashing, remove the battery, and reattach it. If after several attempts ??? the indicators continue to flash ??? your battery cannot take a charge and must be replaced.

Throwing the battery into a fire or exposing the battery to excessive heat ??? over 149?? F (65?? C) could be hazardous.

Do not short the battery???s terminals.

Allow battery to cool down before attaching it to adapter/charger. The CHARGE indicator will not light and the battery will not charge if you attach a hot battery.

Do not attempt to disassemble or modify the battery. There are no user- serviceable parts inside.

Use the battery only with specified AC adapter/chargers and camcorders.

If leakage from a damaged battery contacts your skin or clothing, wash it off immediately with running water.

13

Powering the Camcorder

Check Battery Power (Battery Level Indicator)

Battery Level Indicator

Display in Viewfinder

The battery level indicator ( ) always appears in the camcorder???s viewfinder to show how much battery power is left in the rechargeable battery.

This indicator is not recorded on the tape.

???When the battery is fully charged, the display shows .

???After a while, only appears.

???When the battery reaches the empty level, will start flashing. Recharge the battery or attach the adapter/charger before continuing to use the camcorder.

Note: The battery level indicator has no meaning when you power the camcorder with the adapter/charger or optional car cord.

Caution: When the battery reaches its empty level during use, the camcorder will turn off. However, the battery should have enough reserve power to eject the cassette when you press STOP/EJECT.

If the camcorder does not eject the cassette when you press STOP/EJECT, do not force the cassette door open. This will damage your camcorder.

Before attempting to eject the cassette, power your camcorder with the adapter/charger or recharge the battery.

14

Powering the Camcorder

Using the Optional Thomson Car Cord Adapter

To power your camcorder from the cigarette lighter socket of a car, truck, or RV, you need the optional car cord adapter DCC096 shown on page 45.

The DCC096 car cord is especially designed to convert power from a 12-volt battery to the 9.6-volt input jack on the camcorder.

Caution: The DCC096 car cord is designed to be used only with vehicles having 12-volt negative ground electrical systems.

Warning: To avoid possible damage to your camcorder, use only the DCC096. It has positive tip polarity and is capable of converting 12-volts to 9.6 volts.

Cigarette Lighter Socket

BATTERY

DCIN

9.5V

DC IN 9.6V Jack

Optional Car Cord

Adapter (DCC096)

1.Remove the adapter/charger???s DC cable or battery from the camcorder, if either is attached.

2.Connect the small plug on the car cord to the DC IN 9.6V jack located on the back of the camcorder.

3.Insert the other end of the car cord into the vehicle???s cigarette lighter socket.

4.Place the camcorder???s POWER switch in CAMERA. If the car cord is connected properly, the POWER indicator will light.

Notes: The vehicle does not have to be turned on for the camcorder to operate from the DC car cord.

When using the car cord to power the camcorder, the battery level indicator may display . This indicator is used for battery operation and has no meaning when using the car cord to power the camcorder.

15

Video Cassettes

We recommend that our cassettes be used with your camcorder. Use of poor quality tapes or tapes that have been damaged or mishandled can contaminate the video heads, resulting in a snowy picture or no picture at all during playback. Because there is no control over the type of tape purchased or rented by consumers, head cleaning is not covered under warranty. It is considered normal maintenance.

If a snowy picture or no-picture condition persists, consider the use of a dry chemical non-abrasive head-cleaning tape. Be sure to follow the directions with the head- cleaning kit carefully. Improper use of a head cleaner may damage your camcorder.

Erase Protection ??? Safety Tab

You can use your video cassettes over and over again. To erase a previous recording, just record over it.

Safety Tab

Recording and Playback Times

The camcorder records and plays back in VHS standard speed (SP). The chart shows the maximum SP recording times for popular VHS cassettes.

16

Video Cassettes

Inserting and Removing Cassettes

Safety Tab

STOP/EJECT

Caution: Insert cassette with safety tab facing up and tape windows facing out. Cassette should slide easily into the compartment.

Gently push the cassette down until it locks into place.

Tape Windows

Press Here to Close

1.Attach a power source to the camcorder (either a charged battery or adapter/charger).

2.Press STOP/EJECT on the top of the camcorder to open cassette door.

3.Insert or remove the cassette from the cassette compartment.

4.Gently close the cassette door with your hand.

Cassette Care and Storage

Follow these directions for continued high-quality performance from your cassettes.

???When you are finished with a cassette, rewind it and remove it from the camcorder.

???Label and store cassettes vertically in their protective cases at normal room temperatures. Excessive heat or cold may damage your cassettes.

???Keep dust from entering the cassette compartment. All dust is abrasive and will cause excessive wear on the tape and the camcorder???s recording or playback heads.

???Keep cassettes away from strong magnetic fields, such as electric motors and other devices.

???Do not use a cassette if it has been damaged or exposed to moisture. The tape may jam or damage the camcorder.

???When you are finished recording, break off the safety tab on the cassette to prevent accidental erasure.

???Do not leave your camcorder or cassettes in a car or outdoors for an extended period. Excessive heat or cold may damage them.

17

Camcorder Traveling and Cassette Tips

Traveling Tips

Write down your camcorder???s serial number and keep it separate from the camcorder when traveling. If your camcorder is lost or stolen, you will be able to identify it.

Make sure you have any plug adapters you need before taking your camcorder to other countries. Consult your dealer.

Use extra care to avoid damage to your camcorder and accessories when operating them at a beach or pool. Spray, sand, and dust should be avoided. If your lens has been exposed to the elements, clean it only with proper lens cleaning supplies.

Carry your camcorder in a carrying case when traveling. See page 44 for a specially designed case. An ordinary suitcase or carry bag does not offer the protection your camcorder needs. Treat your camcorder as carry-on luggage to protect it from rough handling.

Cassette Tips

Do not use a cassette if it has been damaged or exposed to moisture. The tape may jam or damage your camcorder.

When you are finished recording, break off the safety tab on the cassette to prevent accidental erasure.

Label your cassettes before storing them.

Store your cassettes vertically in their protective cases at normal room temperature.

Do not leave your camcorder or cassettes in a car or outdoors for an extended period. Excessive heat or cold may damage them.

18

Camcorder Features

STOP/EJECT

F.FWD (Fast Forward)

REW (Rewind)

POWER Switch in CAMERA

REVIEW

Microphone

VCR

OFF

OWER

REC/PAUSE

TRACKING

Quick Review

Press REVIEW when POWER is in CAMERA and the camcorder is in record pause to review the last few seconds of a recording.

The camcorder will play back the last few seconds of the recording, return the tape to its previous position, and return to record pause.

Microphone

The microphone picks up sound during a recording. It is more sensitive to sounds coming from the direction the lens is pointed.

AI (Artificial Intelligence)

The camcorder will automatically adjust focus, white balance and iris according to the recording conditions..

Tape Positioning

When POWER is in VCR and the camcorder is in the stop mode, you can quickly fast-forward or rewind the tape.

???Press F.FWD (fast forward) to fast forward the tape. Press STOP/EJECT to stop fast-forwarding.

???Press REW (rewind) to rewind the tape to the beginning. Press STOP/EJECT to stop rewinding.

19

Camcorder Features

Program AE (Auto Exposure)

Program auto exposure automatically selects the shutter speed and adjusts the iris according to the shutter speed.

AE:60

Viewfinder Display

The AE indicator for the shutter speed selected (1/60, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1000,

1/1500, 1/2000, or 1/4000 second) appears in the viewfinder.

Auto Focus

The camcorder will focus on the subject in the center of the viewfinder.

Auto focus operates on the telephoto ???T??? side from approximately 3.6 feet to infinity and on the wide-angle ???W??? side 3/8 of an inch from the lens surface to infinity.

The following conditions may prevent auto focus from operating properly.

???Subject has close foreground and background far away.

???Two subjects at different distances that overlap.

???Subject with distinct horizontal stripes or small pattern.

???Subject not in center of the viewfinder.

???Subject with shiny surfaces or sharp angles.

???Recording in low-light situations.

???Recording through a window.

Macro Focus

The macro-focus feature lets you focus on objects as close as 3/8 of an inch from the camcorder lens.

1.Press and hold zoom button ???W??? until the lens is completely zoomed out.

2.Position the subject in the center of the viewfinder.

Notes: Zooming is not possible when using macro focus. To change the size of the subject, move the camcorder???s lens closer or farther away from it.

For best results, increase illumination when recording using macro focus.

20

Camcorder Features

Electronic Indexing

Each time you begin recording (after the camcorder has been turned off for at least four hours), the camcorder will automatically record an index mark at the beginning of the new recording.

When you play back the indexed tape in a VCR that has a compatible indexing feature called ???VHS Index Search System???, the invisible marks can be located automatically. See your VCR owner???s manual for index playback instructions.

INDEX

Viewfinder Display

INDEX will appear briefly in the viewfinder to let you know the camcorder is recording an index mark.

Note: The camcorder does not record index marks every time you stop and start recording. An index mark is recorded only once ??? at the start of each day???s recording session (or whenever the camcorder has been turned off for at least four hours).

Time Remaining Display

The time remaining display shows the amount of recording or playback time left on the tape in the camcorder.

Viewfinder Display

?????? ??? ??? ??? ??? ??????will appear for approximately ten seconds when you first start playing or recording a tape while the camcorder calculates the time remaining.

Once time remaining has been calculated, it will automatically be updated and readily available as long as the same tape remains in the camcorder.

21

Viewfinder

The camcorder???s viewfinder is a miniature monitor that displays the picture seen by the camcorder when recording. The viewfinder also can be used for viewing the tape during playback.

When carrying or storing the camcorder, return the viewfinder to the original position to prevent possible damage.

Viewfinder in carrying

or storing position

VCR

OFF

OWER

Pull here

REC/PAUSETRACKING

Caution: Pulling on the eyepiece may cause damage to the camcorder.

1.Grasp the viewfinder and rotate it horizontally.

2.Pull the viewfinder out from the camcorder and adjust the eyepiece for convenient viewing.

Eyepiece Focus Control

Eyepiece Focus

Control

The eyepiece focus control lets you set the focus of the viewfinder for your personal vision. If you wear eyeglasses, you probably can operate the camcorder without them.

Set the correct focus by focusing on one of the viewfinder???s displays (such as the

counter). Look through the viewfinder, and adjust the eyepiece focus control for your vision.

The eyepiece focus control does not affect the focus of the picture actually recorded by the camcorder.

22

Viewfinder

Eyepiece BRIGHT and FOCUS Controls

BRIGHT

FOCUS

BRIGHT and FOCUS Controls

The small BRIGHT and FOCUS controls are set at the factory and should require no adjustment. If they ever require adjustment, use a plastic screwdriver. Make the adjustments with caution to prevent damaging the miniature controls.

Tilt Adjustment

For convenient viewing, you can rotate the eyepiece about 225?? degrees.

Caution: Do not force the eyepiece to rotate completely around. This will damage the eyepiece and/or the camcorder.

23

Displays in Viewfinder

1AE (Auto Exposure) Shutter Speed

The shutter speed selected by the camcorder appears here. It is not recorded on the tape.

2Zoom Level

???The zoom level indicator appears when you press power zoom button T or W.

???Details are on page 30.

3Status

The following displays appear in this area. They are not recorded on the tape.

???REC for recording.

???66 during fast forward.

???55 during rewind.

??? during record pause.

4Tape Counter with Memory Stop (M)

The tape counter helps you locate tape segments. It is not recorded on the tape.

???Press DISPLAY to turn memory stop on or off.

???Details are on pages 28-29.

5Time Remaining ( )

This display shows the amount of recording or playback time remaining on the tape. It is not recorded on the tape. Details are on page 21.

6Battery Level ( )

This indicator shows the amount of time left for the rechargeable battery. It is not recorded on the tape. Details are on page 14.

24

Displays in Viewfinder

DATE/TIME

DISPLAY

VCR

OFF

OWER

POWER

7INDEX

INDEX appears briefly when the camcorder automatically indexes the tape. It is not recorded on the tape.

Details are on page 21.

8TAPE, NO TAPE, and TAPE END

???TAPE flashes when you try to record and the safety tab has been removed.

???TAPE flashes when a damaged tape is inserted. Remove the tape and replace it with a new one.

???NO TAPE flashes when you try to record and there is no cassette in the camcorder.

???TAPE END flashes when you have approximately three minutes recording time left on the cassette.

???TAPE END briefly appears when you reach the end of the cassette during recording.

???These displays are not recorded when they appear.

9Time and Date Display

???Press DATE / T IME repeatedly to display time and date, AUTO date, date only, or no date display when the camcorder is in record pause.

???These displays are recorded when they appear.

???Details are on pages 26-27.

25

Date and Time Display

Set the Time and Date

REW (Rewind)

DATE/TIME

F.FWD (Fast Forward)

POWER

STOP/EJECT

1.Attach a power supply (battery or adapter/charger) to the camcorder.

2.Press and hold the small button on

POWER and place in CAMERA.

3.Press DATE / T IME to display the date and time in the viewfinder. A flashing cursor lets you know which part of the display you are setting.

Note: If flashing cursor does not appear, press and hold DATE/TIME and then press

STOP/EJECT.

12:00AM 1/ 1/95

4.Repeatedly press F.FWD or REW until correct month appears. Press and hold the button to advance the digits faster.

5.When the correct digit is displayed, press STOP/EJECT. The cursor will move to the next part of the display.

6.Repeat steps 4 and 5 to set the correct month, day, year, hour, minute(s), and

AM/PM.

7.After setting AM or PM, press DATE/TIME to remove the flashing cursor and start the internal clock.

To Correct the Date or Time

To correct the date or time, press and hold DATE/TIME and then press STOP/EJECT. The display will appear in the viewfinder along with the flashing cursor. Use F.FWD and REW to correct the time or date. Press DATE/TIME to remove the flashing cursor and start the clock.

26

Date and Time Display

Recording Date and Time (or Date) on Your Tape

The time and date (or date only) can be recorded on your tape. Whenever one of the displays appears in the viewfinder, it will be recorded.

The camcorder has an auto-date feature that will record the date only for approximately ten seconds when you begin recording.

Repeatedly

Press DATE/

TIME

Automatically Recorded

for Ten Seconds at

Beginning of Recording

11/18/95

Charging the Camcorder???s Built-in Clock Battery

The camcorder has a built-in rechargeable clock battery.

This battery must be charged approximately every two months.

1.Attach a power supply (adapter/ charger or charged battery) to the camcorder.

2.Make sure POWER is in OFF.

3.Leave the power supply attached at least 24 hours.

Cautions: If this battery is not charged every two months, it will over-discharge and shorten its useful life.

Do not attempt to replace this battery. Take the camcorder to an authorized Servicenter.

27

Tape Counter with Memory Stop

The tape counter is automatically displayed in the viewfinder and acts as a handy reference to help you locate tape segments.

VCR

OFF

OWER

REC/

PAUSE

REC/PAUSETRACKING

28

Tape Counter with Memory Stop

Memory Stop

The tape counter???s memory stop helps you locate a certain point on the tape. When memory stop is turned on, the tape will stop automatically during fast forward or rewind when the tape counter reaches ???0000M???.

Using Memory Stop:

1.Press DISPLAY to turn memory stop on. ???M??? appears after tape counter when memory stop is turned on.

2.Locate the place on the tape you want to return to and press RESET to reset tape counter to ???0000M???.

Memory

0000M Stop On

3.Continue to record or play the tape. When you want to return to the place you marked, press REC/PAUSE to stop recording, or press STOP/EJECT to stop playback.

4.Make sure POWER is in VCR. Then press REW (rewind). The tape will rewind until it reaches the tape counter reading of ???0000M???.

Notes: Press DISPLAY to turn memory-stop feature on or off.

Whenever memory stop is turned on, the camcorder will stop rewinding or fast forwarding when the counter reaches ???0000M???. To continue rewinding or fast forwarding the tape, press REW (rewind) or F.FWD (fast forward) again.

The tape counter is automatically reset to ???0000??? whenever a cassette is inserted.

29

Zooming

VCR

OFF

OWER

Power Zoom Buttons

T = Telephoto

W = Wide Angle

REC/PAUSETRACKING

Using Power Zoom Buttons

To zoom in or out slowly, press the zoom button lightly. To zoom in or out quickly, press the zoom button firmly.

???Press ???T??? to move the lens in the ???telephoto??? (close-up) direction.

???Press ???W??? to move the lens in the ???wide-angle??? direction.

The zoom level indicator will appear briefly in the viewfinder.

Zoom

LevelT

Indicator

W

30

ProEdit Features

ProEdit?? System

??? Flying Erase Head

??? Edit Search

??? Titler

The camcorder incorporates a complete package of advanced editing features to make it easy and fun to edit your home videos like a professional. The major ProEdit?? System features are described here and on the following pages.

Flying Erase Head

A separate erase head is mounted on the spinning headwheel (hence the term ???flying???). The flying erase head allows you to make clean edits without ???glitches??? or ???rainbow noise???.

Edit Search

The edit-search feature allows you to edit as you make your recording by using F.FWD, REW, and PLAY to precisely position the tape while the camcorder is in record pause.

???Press and hold REW (rewind) to visually search the recorded tape in reverse.

???Press and hold F.FWD (fast forward) to visually search forward on the recorded tape.

???Press and hold PLAY to view the recorded tape at normal speed.

When you release the button, the camcorder will return to record pause at that point on the tape.

31

ProEdit Features

Titler

The camcorder???s built-in titler can store two different titles in memory. Either title can be displayed and recorded at any time.

The built-in character register contains over 45 different characters for creating your titles. Each title can contain up to 32 characters on two lines.

TITLE SEL ???

(Also REW)

TITLE SEL +

(Also F.FWD )

EDIT???ADV

(Also STOP/EJECT)

32

ProEdit Features

To Create a Title

1.Attach a power source to the camcorder, press and hold the small button on POWER while sliding it to CAMERA. POWER indicator will light.

2.Press TITLER to display titler graphics in the viewfinder. A flashing cursor will appear.

Note: Press TITLE SEL (select) to select the other title page. Each time you press TITLE SEL, it will switch between the two title pages.

3.Press EDIT???ADV to move the flashing cursor to the place you want to begin your title.

4.Select the first character for your title by pressing TITLE SEL + or TITLE SEL ??? until the character you want appears in the viewfinder.

Notes: You can scroll through the character register at a faster pace by pressing and holding the TITLE SEL + or

TITLE SEL ???.

See the ???Chart of Characters in Titler???s Register??? below for the characters available.

5.After you have selected the first character, press EDIT???ADV to move the flashing cursor where you want your next character to appear.

6.Repeat steps 4 and 5 until you have completed the title.

7.Press TITLE SEL if you wish to create another title on the other title page.

8.When you are finished, press TITLER to store the title and remove the title display from the viewfinder.

Important Note: Remember to remove the titler graphics from the viewfinder for normal recording.

To Correct an Error

1.Press TITLER to display the titler graphics in the viewfinder.

2.Press EDIT???ADV until the flashing cursor is placed over the character you wish to correct.

3.Press TITLE SEL + or TITLE SEL ??? until the correct character appears.

Note: If you want to delete a character, press TITLE SEL + or TITLE SEL ??? until the blank space appears.

Chart of Characters in Titler???s Register

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ? ???

. / , ??? ; : < > ! (BLANK)

(continued on next page)

33

ProEdit Features

Recording Titles on a Tape in the Camcorder

To record a title on a tape in the camcorder, follow the steps below.

1.Attach a power source to the camcorder, slide POWER to

CAMERA.

2.Locate the place on the tape where you want to record the title.

Notes: If you record a title on a pre- recorded tape, the audio and video will be erased where the title is inserted. There will also be a three-to-four second pause of blank tape before the existing audio and video return.

3.Press TITLER to display the titler graphics in the viewfinder.

Note: If you want to record the other title page, press TITLE SEL to display it in the viewfinder.

4.Press REC/PAUSE to start recording the title.

5.After you have recorded the title for the desired length of time, press TITLER to remove titler graphics from the viewfinder. The camcorder will now record as normal. If you do not want to continue recording, press

REC/PAUSE.

Important Note: Remember to remove the titler graphics from the viewfinder for normal recording.

Recording Titles While Copying a Tape from Camcorder to Another VCR

This method of adding titles lets you keep the original tape as it is, and add titles to the copy you are making on another VCR. Connect your camcorder to a VCR as shown on pages 38-39.

1.Attach a power source to the camcorder.

2.Place the tape you want to copy in the camcorder and place POWER in VCR.

3.Press TITLER to display the title you want to record. If you want to record the other title page, press TITLE SEL. The camcorder will recall the last title page displayed the next time you press

TITLER.

4.Press TITLER to remove titler graphics from the viewfinder.

5.Place a blank tape in the VCR, and place the VCR in record pause.

6.Start copying the tape from the camcorder to the VCR. Details for copying a tape are on pages 38-39.

7.When you see the place on the tape you want to insert the title, press

TITLER.

8.After you have recorded the title for the desired time, press TITLER to stop recording the title.

9.Stop the camcorder and VCR when you are finished copying the tape.

Important Note: Remember to remove the titler graphics from the viewfinder for normal playback.

34

Recording Tips

Make a recording of your home and contents to store in a safe place in case of fire or theft.

Practice recording under a variety of lighting conditions. This will help you respond quickly whenever you see a scene you want to record.

Do not move the camcorder rapidly from side-to-side while recording. A steady, gradual ???pan??? avoids blurring and ???jitter???.

Use the viewfinder to make sure the camcorder is level while recording or your scenes will appear ???tilted???.

Make sure indoor scenes are well-lit to improve picture quality and color reproduction.

Do not bump or tap the camcorder???s microphone while recording because this sound will be recorded.

Be aware of video and audio backgrounds. Background details barely noticed while you are taping may show up as visual ???clutter??? on your recording. Background noises (especially TV sets, radios, household appliances, traffic sounds, etc.) can detract from the sound you want to record.

Avoid long ???still??? shots of landmarks and scenic attractions. Recordings are more interesting if they include people and details. ???Local color??? will give travel videos lasting appeal. Consider recording a familiar or landmark scene from an unfamiliar vantage point for added interest. Remember to check the lighting before starting to record.

Try to avoid taping backlit subjects indoors. Bright light behind your subject may cause the subject to appear too dark.

Include close-up shots of individuals when taping family outings or group functions.

For a different perspective, try kneeling down (or laying) on the floor when recording children or pets.

35

Viewfinder Playback and Playback Features

REW (Rewind)

POWER Switch in VCR

F.FWD (Fast Forward)

STOP/EJECT

VCR

OFF

OWER

TRACKING

REC/PAUSETRACKING

Viewfinder Playback

1.Attach a power supply to the camcorder.

2.Press and hold the small button on POWER while sliding it to VCR.

3.Press STOP/EJECT and insert the cassette you want to play back.

Note: The camcorder can only play back tapes recorded at SP speed.

4.Press PLAY to begin playback. Adjust TRACKING if necessary.

5.Press STOP/EJECT when you are finished.

36

Viewfinder Playback and Playback Features

Playback Features

Stop-Action Pause

During playback, you can view one frame of the tape.

???Press REC/PAUSE to stop the action.

???Press REC/PAUSE again to return to normal playback.

Caution: Pause is designed for momentary interruptions and should not be used for an extended period of time. If the camcorder remains in pause for more than five minutes, it will automatically remove the tape from the spinning heads to prevent excessive tape wear.

Picture Search

During playback you can visually search the tape at a higher speed in forward or reverse.

???Press and hold F.FWD to search the tape forward.

???Press and hold REW to search the tape in reverse.

???Release the button to return to normal playback.

Tracking

When you play a tape not recorded on your camcorder, streaks may appear. To remove the streaks, press either TRACKING button to move the streaks up or down and out of the picture.

Press either TRACKING button during stop-action (play-pause) to reduce picture ???jitter??? (picture bouncing up or down).

TRACKING

(Also Power Zoom)

Remove the cassette to reset the camcorder???s tracking to its preset center.

The TRACKING buttons only affect tape playback. They have no effect during recording.

37

Playback on a TV or VCR with AUDIO and VIDEO IN Jacks

To connect your camcorder to a TV monitor (or VCR) with AUDIO IN and VIDEO IN jacks, you will need an optional audio/video cable, such as AH005 shown on page 46. already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV.

VCR

OFF

OWER

REC/PAUSETRACKING

Yellow Video Plug

Caution: The unauthorized recording of television programs and other materials may infringe the rights of others.

38

Playback on a TV or VCR with AUDIO and VIDEO IN Jacks

1Attach the white plug on one end of the audio/video cable to the AUDIO IN jack on the TV or VCR.

Note: If your TV (or VCR) has stereo left and right AUDIO IN jacks, attach the plug to the one labeled MONO. If one of the jacks is not labeled MONO, you may need a Y-adapter, such as AH25 shown on page 46, to hear both channels.

2Attach the yellow plug on the same end of the audio/video cable to the VIDEO IN jack on the TV or VCR.

3Attach the yellow plug on the other end of the audio/video cable to the yellow VIDEO jack and the white plug to the white AUDIO jack on the side of the camcorder.

Playback Operation and How to Copy Tapes on a VCR

1.A. Camcorder connected directly to TV monitor: Turn on the TV and tune it to its video input channel.

B.Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the ???line??? or ???camera??? mode. (If your VCR does not have a ???line??? or ???camera??? mode, consult the VCR owner???s manual.) Operate the TV as you normally do to see the signal coming from the VCR.

2.Press and hold the small button on the camcorder???s POWER switch while

sliding it to VCR. Insert the cassette you want to playback (or copy).

Note: The camcorder can only play back tapes recorded at the SP speed.

3.Press PLAY on the camcorder. To copy what the camcorder is playing, place a blank cassette in the VCR and start the VCR recording. Adjust the tracking on the camcorder if necessary.

Details are on page 37.

???During playback, use the playback features described on pages 36-37.

4.Press STOP/EJECT when you are finished.

Watching What the Camcorder is Seeing or Recording on the TV

1.A. Camcorder connected directly to TV: Turn on the TV, and tune it to its video input channel.

B.Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the ???line??? or ???camera??? mode. (If your VCR does not have a ???line??? or ???camera??? mode, consult the VCR owner???s manual.) Operate the TV as you normally do to see the signal coming from the VCR.

2.Press and hold the small button on the camcorder???s POWER switch while sliding it to CAMERA. Insert the cassette you want to record on.

Note: When the camcorder is used as a camera, turn the TV???s volume down to prevent a high-pitched squeal caused by feedback.

3.Press the camcorder???s REC/PAUSE button to begin recording. You can watch what the camcorder is seeing or recording on the TV screen.

39

Playback on a TV Without Audio and Video Inputs

To connect your camcorder to a TV without audio and video input jacks. You will need an optional RF output adapter (such as CRF95) and an optional coaxial RF cable (such as AH065G or AH066G) shown on page 46.

Antenna

VCR

OFF

OWER

REC/PAUSETRACKING

Transformer

Optional Coaxial RF Cable (such as AH065G or AH066G)

3

Channel Selector

Optional RF Output Adapter

(such as CRF95)

OUT

TO TV

1Disconnect the VHF antenna from your TV. If you are going to leave the RF adapter connected to the TV, connect the antenna to the RF output adapter.

A.If antenna is round 75-ohm cable, connect it to IN FROM ANT connector on RF output adapter.

B.If antenna is flat twin-lead, connect flat-lead connectors to screw terminals on optional 300- 75 ohm transformer. Then connect transformer to IN FROM ANT connector on RF output adapter.

2Attach one end of coaxial RF cable to OUT TO TV connector on RF adapter, and attach other end of the cable to VHF input on TV as shown.

Note: If TV has screw terminals, you may need an optional 75-to-300 ohm transformer, such as AH011.

3Attach RF output adapter???s yellow plug to the VIDEO jack, small plug to the RF DC OUT jack, and white plug to the AUDIO jack on the side of the camcorder.

40

Playback on a TV Without Audio and Video Inputs

Playback Operation

1.Set the channel selector switch on the RF output adapter to CH3 or CH4.

2.Turn on the TV and tune it to the same channel (3 or 4) you selected with the channel selector switch on the RF output adapter.

3.Press and hold the small button on the camcorder???s POWER switch while sliding it to VCR.

4.Insert the cassette you want to play back into the camcorder.

Note: The camcorder can only play back tapes recorded at the SP speed.

5.Press PLAY on the camcorder. Adjust tracking on the camcorder, if necessary. Details are on page 37.

???During playback, use the playback features described on pages 36-37.

6.Press STOP/EJECT on the camcorder when you are finished playing back the tape.

Watch What the Camcorder is Seeing or Recording on the TV

1.Turn on the TV and tune it to channel 3 or 4 (the same channel you selected with the CH3/CH4 switch on the RF output adapter).

2.Press and hold the small button on the camcorder???s POWER switch while sliding it to CAMERA. Insert the cassette you want to record on.

3.Press the camcorder???s REC/PAUSE button to begin recording. You can watch what the camcorder is seeing or recording on the TV screen.

Note: When the camcorder is used as a camera, turn the TV???s volume down to prevent a high-pitched squeal caused by feedback.

Normal TV Viewing

Note to Cable-TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code,

Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

41

Attaching the Shoulder Strap

The shoulder strap is designed to let you carry the camcorder from your shoulder and

??? when you are ready to shoot ??? bring the camcorder to shooting position in one quick movement.

Cautions: When carrying the camcorder with the shoulder strap, place the viewfinder in its original position. This helps prevent possible damage to the viewfinder from bumping against your body as you move.

Make sure the shoulder strap is firmly attached before using it to carry your camcorder.

To Attach the Shoulder Strap

1.Unfasten one end of the shoulder strap from the buckle. Make sure you leave the buckle on the strap.

2.Thread one end of the shoulder strap through one of the shoulder strap rings as shown below in diagrams A and B.

Shoulder Strap Rings

3.Thread the strap back into the buckle as shown below. Pull on the strap and make sure it is fastened correctly and tightly before using it to support your camcorder.

4. Repeat steps 1???3 to attach the other end of the shoulder strap.

42

Specifications

General

Power requirement: 9.6VDC

Power consumption: 7 watts (normal)

Weight: 4.4 lbs. (2 kg)

Dimensions:

4-1/2"(W) x 8-1/8"(H) x 12-1/4"(D) (111 x 205 x 311mm)

Video Recorder Section

Format: VHS

Record/Playback System:

Two video record/playback heads One flying erase head

Headwheel Cylinder Diameter: 62 mm

Video Signal: EIA Standard NTSC Color

Camera Section

Scanning: 525 Lines/60 Fields/30

Frames

Image Sensor: 1/4??? high/resolution, solid state CCD imager

Tripod Mount: One 1/4" x 20 threaded hole

Lens: f1.6 ??? 12:1 (4-48mm)

Diameter: 46 mm

Adapter/Charger

Power Requirement: 120 V 50/60 Hz

Power Consumption: 30 Watts (max)

Weight: (390 grams)

Dimensions:

(78 x 52 x 155 mm)

Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and receiver.

???Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

???Consult the dealer or an experienced radio/TV technician for help.

Alterations or modifications carried out without appropriate authorization may invalidate the user???s FCC right to operate the equipment.

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled ???Digital Apparatus???, ICES-003 of the Department of Communications.

Cet appareil num??rique respecte les limites de bruits radio??lectriques applicables aux appareils num??riques de Classe B prescrites dans la norme sur le mat??riel brouilleur: ???Appareils Num??riques???, NMB-003 ??dict??e par le ministre des Communications.

43

Optional Accessories

We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your camcorder. These pages have a selection of accessories to help make your memorable moments look and sound even better.

To order accessories, contact your local dealer.

Accessories are available by calling toll-free or by using the order form

on page 49.

AC028A Soft Camcorder Case

This case provides exceptional protection and utility for full size camcorders and most accessories. It is constructed of rugged, 1000 denier weight, Cordura nylon fabric for years of reliable service and good looks.

Three outside pockets provide ample accessory storage with mesh-covered lens filter compartment and built-in holders for memo pads, pens, and other accessories. The hand grip and adjustable shoulder strap allow for convenient, comfortable transportation of the camcorder.

VCC1000 Video Color Control Center

The VCC1000 is two accessories in one. The color control center allows you to adjust the color intensity, tint, white balance, and sharpness of tapes being dubbed. This is especially helpful when the original tape was produced in poor lighting conditions or poor color settings.

The second feature, the character generator, lets you create titles that can be recorded on your tapes. This lets you add a professional and/or personal touch to your home videos.

All specifications and descriptions of accessories are subject to change without notice.

44

Optional Accessories

DCC096 DC (Battery) Car Cord

CPS014 AC Adapter/Charger

POWER

CHARGE

This DC car cord enables you to operate your camcorder from your car, truck, or RV by plugging the car cord directly into the vehicle???s cigarette lighter.

Caution: Do not use any other car cord with this camcorder.

This adapter/charger operates on 100- 240 volts, 50/60 Hz, so it can be used almost anywhere in the world to power your camcorder and recharge the EP096FS battery supplied with your camcorder.

It also charges the EP096FL (2 hour) battery. A simple plug adapter may be required in some countries.

EP096FS and EP096FL Rechargeable Batteries

These rechargeable lead-acid batteries are specifically designed for long life. The EP096FS can power your camcorder up to one hour and the EP096FL up to two hours (depending on how much you use zoom and pause).

Both batteries can be recharged with the AC adapter/charger that came packed with your camcorder. First charging takes approximately two hours for the EP096FS and three hours for the EP096FL.

(continued on next page)

45

Optional Accessories

AH005 Audio/Video Cable

This six foot audio/video dubbing cable is used to connect your camcorder to a VCR or TV monitor to copy tapes.

CRF95 RF Output Adapter

This adapter is used with coaxial RF cable (AH065G or AH066G) to connect your camcorder to a standard TV (one without audio/video input jacks) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-75 ohm transformer such as 193983. If your TV has 300 ohm VHS screw terminals, you will need an optional 75/300 ohm transformer such as AH011.

193983 Cable Transformer

This 300-to-75 ohm transformer is used to connect a standard 300-ohm antenna twin-lead to a standard round 75-ohm connector.

AH011 Cable Transformer

This 75-to-300 ohm transformer is used to connect a standard 75-ohm antenna cable, such as AH065G or AH066G, to the 300-ohm screw terminals on a TV.

AH25 Y-Adapter

This Y-adapter allows you to connect your camcorder???s mono audio cable to a stereo TV or VCR.

46

Optional Accessories

Removing the Lens Hood

The lens hood can be removed so you can attach optional accessories, such as wide- angle lens, lens extender, or lens filter kit.

To remove the lens hood, place your hand flat against the lens hood and turn it counterclockwise. Do not grasp the end of the lens hood.

Attaching Accessory Lens

Remove the lens hood as shown above.

REC/PAUSETRACKING

Turn the accessory lens clockwise into the camcorder???s lens. Make sure the lens is tightened firmly, but do not over tighten.

All specifications and descriptions of accessories are subject to change without notice.

(continued on next page)

47

Optional Accessories

Using an Optional Tripod

Mounting the camcorder on a tripod, such as AC031 or AC040, will keep the camcorder steady and produce excellent video results.

AC031 Deluxe Tripod

This tripod???s fluid effect head provides smooth camera pan and tilt. Its quick- release mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section leg design folds down to 24" when not in use and weighs only 4-1/4 lbs. Rubber feet allow for sure footing and the built-in retractable leg spikes eliminate the need for removing the feet.

AC040 Heavy Duty Tripod

This high-end tripod is equipped with many professional features that enable you to produce professional results. The spring-flow head system combines both fluid and spring action for smooth ???panning??? and tilt action. It features heavy-duty 30 mm ???D-channel??? styled legs, oversized quick-release pad, click stop tilt adjustment, pan-drag tension adjustment, tilt-lever lock, transferable handle, bubble level, adjustable elevator friction tube, non-skid rubber feet with retractable spikes and quick-release leg lever locks.

Caution: Before using a tripod, make sure it is stable enough to hold the camcorder without falling over. Do not transport the camcorder attached to the tripod.

When attaching your camcorder to a tripod, be careful not to force the tripod screw into the camcorder???s tripod mounting hole.

The tripod screw should not protrude into the camcorder more than approximately three-eighth (3/8) inch. Forcing the screw could damage the mounting hole on the bottom of the camcorder.

All specifications and descriptions of accessories are subject to change without notice.

48

Accessory Order Form

Detach Here

Order Form for Camcorder Models CC417

check must be in U.S. currency only. No COD or cash.

???Allow 8 weeks for delivery.

???All accessories are subject to availability.

???Where applicable, we will ship a superseding model.

Please complete other side also

49

Accessory Order Form

Charge your order on your VISA or MasterCard by

filling in below

USE YOUR CREDIT CARD

??

IMPORTANT: Copy complete account number from your VISA card

My card expires:

AUTHORIZED SIGNATURE

Prices are subject to change without notice.

Please make sure that both sides of this form have been filled out completely.

DetachHere ???

50

Accessory Order Form

To order accessories, contact your local Dealer.

If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail.

United States and Canada Orders

To place your order by phone, have your Visa or MasterCard ready and call the toll- free number listed below between 8AM and 8PM Eastern Standard Time. Use this

number only to place an order for accessory items listed on this order form.

1 ??? 800 ??? 338 ??? 0376

Most times your order will be shipped UPS within 72 hours of receipt. If ever it is not possible to ship within 30 days, we will notify you with an update on your order and an option to cancel.

To place your order by mail, detach and mail the completed order form with credit card information, money order, or check in U.S. currency (made payable to Thomson Consumer Electronics, Inc.) to the following address:

Video Accessories

PO Box 8419

Ronks, PA 17573

For more information on these accessories (or current prices), write to the following address:

Video Accessories Customer Service

Thomson Consumer Electronics, Inc.

Distributor & Special Products

2000 Clements Bridge Rd

Deptford, NJ 08096-2088

International Orders

This offer is valid only in the United States and Canada. For international orders, please send your request for a price quotation (not an order) to:

International Customer Service

Thomson Consumer Electronics, Inc.

Distributor & Special Products

2000 Clements Bridge Rd

Deptford, NJ USA 08096-2088

51

Care and Maintenance

Things to Avoid

52

Care and Maintenance

Cleaning the Camcorder

Caution: Use of strong cleaning products, such as those containing alcohol or benzine, may damage the camcorder.

Cleaning the Camcorder???s Lens

To clean the camcorder???s lens, blow it with a blower brush, and then gently wipe the lens with cleaning tissue and commercially prepared cleaning solution designed for use on camera lens. Improper cleaning may scratch the lens.

Caution: Do not touch the lens with your fingers. The oil from your skin can damage the lens.

Cleaning the Camcorder???s Viewfinder

1. Depress tab to open small cover.

Caution: Do not force the cover to open completely. This could damage the cover.

2. Gently use a cotton swab and clean the mirror inside viewfinder.

3. Gently close cover until tab snaps in place.

53

Trouble Checks

Troubles sometimes are caused by simple ???faults??? that you can easily correct without the help of a service technician by first checking a few basic remedies.

Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter, look below for the type of trouble you are experiencing. Then perform the simple checks and adjustments listed for that trouble.

54

Trouble Checks

(continued on next page)

55

Trouble Checks

56

Customer Assistance and Service

You can reach Thomson at the following number:

800-283-6503

(Toll free inside U.S.A.)

Our toll-free Camcorder number operates from 8 a.m. to 5 p.m., CST Monday ??? Friday

for U.S. customers only

Thomson provides a toll-free telephone number to help you with any problems you may encounter with your camcorder. Many can be diagnosed over the phone, and if necessary, a replacement unit can be shipped to you. Please have your camcorder model/serial number and date of purchase ready when you call. If your unit is out of warranty, we will quote the cost of an exchange unit to you.

Returning equipment to Thomson for repair or exchange

If we are unable to resolve your problem over the phone, we will gladly service your unit or exchange it for a new or refurbished camcorder. Refer to the limited warranty on the reverse side to learn about your specific rights and responsibilities.

Always consult Thomson and get a Return Authorization number before returning anything! Obtain a Return Authorization (RA) number from the telephone representative before returning your equipment to avoid delays, accounting errors, or even loss of your unit.

Important information to customers who ship defective equipment to Thomson Consumer Electronics

The Thomson representative who authorized the return of your equipment will give you an RA number over the phone. They will also provide you with instructions on where and how to return your camcorder. Write the number in large, clear characters on the outside of the box. To avoid confusion and misunderstandings, shipments without an RA number clearly visible on the outside of the box will be returned to you at your expense.

Include a brief note describing the problem and any conversations about the problem you have had with Thomson personnel. Include your name, address

and model/serial number of your camcorder. These numbers are located on the bottom of your unit. If your camcorder is within the warranty period, please provide a copy of the bill of sale to verify purchase date. Use the original box and packing material to protect the equipment from damage in shipment.

For your protection, insure all shipments for full replacement value and use a reliable shipper. Thomson assumes no responsibility for warranty shipments from the customer to the factory if not shipped in the manner prescribed by Thomson.

(continued on next page)

57

Limited Warranty

What your warranty covers:

???Any defect in materials or workmanship.

For how long after your purchase:

???90 days for labor charges.

???One year for parts.

What we will do:

During the initial 90 days

???Exchange your camcorder with a new or, at our option, a refurbished unit or at your option, repair your camcorder at no cost to you.

After the 90 days and within one year

???Exchange your camcorder with a new or, at our option, a refurbished unit or at your option, repair your camcorder. Parts will be provided at no charge, but you will be responsible for the cost of labor required for the repair.

How you get service:

???Call 1-800-283-6503 and have your unit???s date of purchase and model/serial number ready. The model/serial number information is on the bottom of your camcorder.

???A representative will troubleshoot your problem over the phone. If the representative determines that you should receive a replacement unit, you will be provided with a Return Authorization (RA) number and the location of a nearby exchange point if one exists. No returns will be accepted without the RA number.

To receive a replacement camcorder before you return yours:

If you are located near an exchange point:

1.We will send a replacement unit to the exchange point next business day delivery.

2.The exchange location will notify you of its arrival.

3.Take your unit, including all accessories, and your bill of sale

which validates date of purchase to the exchange location and you will be provided the new or refurbished unit.

4.If the repairs were covered by your warranty, you will not be billed.

If you are not located near an exchange point:

1.Provide your Discover, MasterCard or Visa account number and expiration date to our phone representative. This is for security purposes. If we receive your unit including all accessories within 14 days from the date you were provided a Return Authorization number, only items not covered by warranty will be charged to your account. IF YOUR UNIT

INCLUDING ALL ACCESSORIES

IS NOT RECEIVED WITHIN 14

DAYS, THE SUGGESTED

RETAIL VALUE OF THE

CAMCORDER AND/OR

ACCESSORIES WILL BE

CHARGED TO YOUR CREDIT CARD. This amount will be credited if the unit is subsequently received.

2.We will send you a replacement unit next business day delivery.

3.You will receive an invoice packed with the replacement product, but will not be charged for the unit portion of the invoice amount if we receive your unit including all accessories within 14 days from the date you were provided the RA number. Any labor and parts charges not covered by our warranty will be included and charged against your account.

4.Ship the unit back to us along with all accessories included with your camcorder using the replacement unit???s carton. Shipping instructions will be included in the carton along with your RA number, which will allow you to easily ship the unit back to us. Make sure you insure your

58

Limited Warranty

shipment in case of damage or loss.

Include with the shipment:

???A copy of your dated bill of sale to verify your unit???s warranty eligibility.

???A brief note describing your camcorder problem.

???Your name, address and phone number.

Return transportation, storage, and handling costs and insurance are your sole responsibility. We accept no liability in case of damage or loss.

To receive a replacement unit after we have received your unit:

1.Write the RA number on the outside of the carton used to return the unit.

Make sure you insure your shipment in case of damage or loss.

2.Carefully pack the unit along with all accessories included with your camcorder, using the original box and packing material if possible.

3.Include with the shipment:

???A copy of your dated bill of sale to verify your unit???s warranty eligibility.

???A brief note describing your camcorder problem.

???Your name, address and phone number.

Return transportation, storage, and handling costs, and insurance are your responsibility. We accept no liability in case of damage or loss.

4.Include a cashier???s check or money order for payment if there are any out of warranty labor or parts charges which were indicated by the representative, and you elected not to use your credit card.

5.Upon receipt of your product, a new or refurbished unit will be shipped to you next day delivery.

To have your Camcorder repaired by an Authorized RCA Camcorder Servicenter:

???Check with your dealer or call 1-800- 336-1900 for the Authorized RCA Camcorder Servicenter nearest you.

???Take your unit to the Authorized RCA Camcorder Servicenter of your choice.

???Show the Authorized RCA Camcorder Servicenter representative your sales receipt or other, evidence of purchase.

???Pick up your camcorder when repairs are complete.

What your warranty does not cover:

???Adjustment of customer controls.

???Damage from misuse or neglect.

???A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes.

???Battery for clock and other features.

???Cleaning of video/audio heads.

???Camcorders purchased or serviced outside the U.S.A.

???Return transportation, storage and handling costs of your unit, including insurance for loss or damage.

???Acts of God, such as but not limited to lightning damage.

Product Registration:

???Please complete and mail the Product Registration Card packed with your camcorder. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage.

How State Law relates to warranty:

???This warranty gives you specific legal rights and you may have other rights that vary from state to state.

If you purchased your Camcorder outside the United States:

???This warranty does not apply. Contact your dealer for warranty information.

59

Index

60

Index

Picture Search . . . . . . . . . . . . . . . .36-37 PLAY Button . . . . . . . . .7,8,31,36,39,41 Playback on a TV With

AUDIO/VIDEO IN Jacks . . . . .38-39 Playback on a TV

Without Audio/Video Inputs . .40-41 Playback, First . . . . . . . . . . . . . . . . . . . .7 Playback, Viewfinder . . . . . . . . . . . . .36 Plug Adapter, Optional . . . . . . . . . . . .10

POWER (CAMERA/OFF/VCR)

Switch . . . .5,7,12,19,26-27,36,39,41

Power Zoom Buttons . . . . . . . . . . . . .30

Powering Your Camcorder . . . . . .10-15

Problem Solving . . . . . . . . . . . . . .54-56

Product Registration . . . . . . . . . . . . . . .i

ProEdit Features . . . . . . . . . . . . . .31-34

Program AE (Auto Exposure) . . . . . . .20

Quick Review . . . . . . . . . . . . . . . . . . .19

REC Indicator . . . . . . . . . . . . . . . . . .7,24

REC/PAUSE Button .7,9,29,34,37,39,41

Rechargeable Battery . . . . . . . . . . .11-14

Recording Date and Time . . . . . . . . . .27

Recording Speed . . . . . . . . . . . . . . . . .16

Recording Tips . . . . . . . . . . . . . . . . . .35

Recording Titles . . . . . . . . . . . . . . . . .34

Recording, First . . . . . . . . . . . . . . . . . . .7

Registration Card . . . . . . . . . . . . . . . . . .i

Removing Lens Hood . . . . . . . . . . . . .47

Removing the Rechargeable Battery .12

RESET Button . . . . . . . . . . . . . . . . .8,29

REVIEW Button . . . . . . . . . . . . . . . .8,19

REW (Rewind) Button

. . . . . . . . .7,8,19,26,28-29,31,33,37

RF DC OUT Jack . . . . . . . . . . . .8,40-41

RF Output Adapter . . . . . . . . . .40-41,46

Safety Information . . . . . . . . . . . . . . . . .i

Safety Precautions, Battery . . . . . . . . .13

Safety Tab . . . . . . . . . . . . . . . . . . . . . .16

Set the Date and Time . . . . . . . . . . . . .26

Shoulder Strap Attachment Rings . .9,42

Shoulder Strap, Attaching . . . . . . . . . .42

Solving Problems . . . . . . . . . . . . . .54-56

SP (Standard Play) Speed . . . . . . . . . .16

Specifications . . . . . . . . . . . . . . . . . . .43

Status Displays . . . . . . . . . . . . . . . . . .24

Stop Action Pause . . . . . . . . . . . . .36-37

STOP/EJECT Button

. . . . . .6,7,8,17,19,26,29,36,37,39,41 Tab, Safety . . . . . . . . . . . . . . . . . . . . .16 Table of Contents . . . . . . . . . . . . . . . .1-2 TAPE END Indicator . . . . . . . . . . .24-25 TAPE Indicator . . . . . . . . . . . . . . .24-25 Tape Copying . . . . . . . . . . . . . . . .38-39 Tape Counter . . . . . . . . . . . . . .24,28-29 Tape Positioning . . . . . . . . . . . . . . . . .19 Things to Avoid . . . . . . . . . . . . . . . . .52 Tilt Adjustment . . . . . . . . . . . . . . . . . .23 Time and Date Display . . . .24-25,26,27 Time and Date Recording . . . . . . . . . .27 Time Remaining Display . . . . . . . .21,24 Tips, Cassette . . . . . . . . . . . . . . . . . . .18 Tips, Recording . . . . . . . . . . . . . . . . . .35 Tips, Traveling . . . . . . . . . . . . . . . . . .18 TITLE SEL + and ??? Buttons . . . .8,32-34 TITLE SEL Button . . . . . . . . . . .8,32-34 TITLER Button . . . . . . . . . . . . . .8,32-34 Titler . . . . . . . . . . . . . . . . . . . . . . .32-34 TRACKING (Also Power Zoom)

Buttons . . . . . . . . . . . . . . . .37,39,41 Traveling Tips . . . . . . . . . . . . . . . . . . .18 Tripod, Using . . . . . . . . . . . . . . . . . . .48 Trouble Checks . . . . . . . . . . . . . . .54-56 Unpacking the Camcorder . . . . . . . . . .3 Using a Tripod . . . . . . . . . . . . . . . . . .48 Using Adapter/Charger . . . . . . . . . . . .10 Using the Rechargeable Battery . .11-14

VCR/OFF/CAMERA

Switch . . . .5,7,12,19,26-27,36,39,41

VIDEO/AUDIO Jacks . . . .8,38-39,40-41

Video Cassettes . . . . . . . . . . . . . . .16-17

Viewfinder . . . . . .6,8,22-23,24-25,36,53

Viewfinder Playback . . . . . . . . . . . . . .36

Viewfinder, Cleaning . . . . . . . . . . . . .53

Warranty, Limited . . . . . . . . . . . . .58-59

Zoom Buttons . . . . . . . . . . . . . . . . .9,30

Zoom Level Control . . . . . . . . . . . .24,30

Zooming . . . . . . . . . . . . . . . . . . . . . . .30

61

Need Assistance? We want to help!

U.S. Consumers:

Camcorder Exchange Warranty . . . . . .800-283-6503

Customer Service . . . . . . . . . . . . . . . . .800-336-1900

Accessories . . . . . . . . . . . . . . . . . . . . .800-338-0376

Canadian Consumers:

English . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0338

French . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0445

If your camcorder needs service, please contact your dealer or the nearest Servicenter from the yellow pages. Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product.

10330 N Meridian Street

Indianapolis, IN 46290

?? 1995 Thomson Consumer Electronics, Inc.

Trademark(s)?? Registered

Marca(s) Registrada(s)

Printed in Japan

Part Number 95-CC417-1

QR12657