WARNING

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

Product Registration

Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Attention: Pour ??viter les chocs ??lectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusq?? au fond.

Refer to the identification/rating label located on the back panel of your product for its proper operating voltage.

FCC Regulations state that unauthorized changes or modifications to this equipment may void the user???s authority to operate it.

Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the picture tube (or projection TV picture tubes). ALSO, some network/program logos, phone numbers, etc. may cause similar damage. This damage is not covered by your warranty.

Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Connections & Setup

Choose Your Connection

There are several ways to connect your TV. Determine which connection is best for you.

TV (back panel)

TV + VCR

From Cable, Cable Box, or Antenna

TV

CABLE/

ANTENNA

From Cable

or Antenna

TV Only

Connect the TV to your cable or antenna

Connect the coaxial cable from your cable or antenna to the CABLE/ANTENNA jack on the back of your TV.

Go to page 6

Satellite

VCR

TV

TV (back panel)

2B

CABLE/

ANTENNA

CHAN

CHAN

MENU

Use the CHAN ^/v and VOL +/??? buttons to move through the menu system. Use the MENU button to select items.

How to Use the Remote Control to Complete the Interactive Setup

The technical term is ???Navigation??? ??? how you move through the on-screen menus. The theory is the same throughout the menu screens: highlight your choice and select it.

To highlight a menu item, use the CHAN ^/v buttons to move up or down. Use the VOL +/- buttons to move left or right or to change an item???s setting.

Use the MENU button to select menu items.

You can also use the remote???s number buttons to select menu items directly.

Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).

Turn on the TV

Press the POWER button on the remote control or the TV (the first screen of the Interactive Setup appears). The menu screens ???time out??? after a period of time if you don???t make a selection. The tips in this section tell you how to access the Setup menu screens manually.

Tip

To access the setup menus manually, press

MENU and choose Setup.

Complete the Interactive Setup

The menu system in your TV allows the TV???s features to work properly. In this book, we call it the ???interactive setup??? because the TV asks you questions, you answer, and the TV makes the appropriate adjustments. The first time you turn on your TV, the setup screens appear automatically.

SETUP

Select the language to be used in these menus.

1 English

2 Espa??ol

3 Fran??ais

Set the Menu Language

The first part of the SETUP asks you to select your preferred language for the menu system.

1.Highlight your preferred language for the menu system.

2.Press MENU to select that language.

SETUP

Would you like the TV to search for all available channels?

1 Search for channels

2 Skip this step

Complete Auto Channel Search

The next part of the SETUP asks you if you want the TV to search for all channels viewable through your antenna or cable TV system. This is sometimes called ???auto programming.???

1.Press MENU to tell the TV to begin searching for channels. A progress report appears on the screen.

2.When the screen on the TV tells you the search is complete, press MENU.

Note: If you skip Auto Channel Search now, you can access it later

CHAN

CLEAR MENU RESET

1 2 3

4 5 6

7 8 9

CRK10A2/240959

Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings directly through the remote control.

To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the first digit for two seconds until two dashes appear to the right of the number, then add the second two. Example: to tune to channel 123, press and hold 1 for two seconds, press 2, then press 3.

CHAN (up and down) buttons Scan up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels. Also used as up and down arrows in the menu system.

CLEAR Removes any menu or display from the screen and returns you to TV viewing. Also cancels SKIP timer.

DISPLAY Displays channel information. This button is also referred to as INFO in the TV???s menu system.

INPUT Changes to your TV to its video input channel. The Video Input Channel is the channel your TV must tune to in order for you to access a component that???s connected to your TV???s front panel jacks. Example: to view a tape from your camcorder, connect the camcorder to the TV???s front panel VIDEO and L/MONO and R Audio jacks with the audio/video cables.

MENU Displays the TV???s Main menu. When in the menu system, selects highlighted items or returns you to the previous menu.

MUTE Lowers the volume to its minimum level. Press again to restore volume.

POWER Turns the TV on and off.

PREV CH Returns you to the previous channel.

RESET Resets original settings in several control panels.

SKIP If you press this button before you change the channel, the TV waits 30 seconds and automatically goes back to the original channel. Each time you press SKIP, you add 30 seconds (i.e, if you press SKIP two times before you change the channel, the TV waits 60 seconds and automatically turns back to the original channel). Press CLEAR to cancel the SKIP timer.

VOL (up and down) buttons Decrease or increase the TV???s volume. Also used as left and right arrows in the menu system.

00:00

Sample displays on a Channel Banner.

Channel Banner

There are several indicators that might appear when you press the DISPLAY button on the remote. This display is called the Channel Banner. The following list describes the items on the Channel Banner screen (left to right and top

to bottom).

TV MAIN MENU

1 Audio

2 Picture Quality

3 Screen

4 Channel

5 Time

6 Parental Controls

7 Setup

PARENTAL CONTROLS

0 Exit

1 V-Chip TV Rating Limit

2 V-Chip Movie Rating Limit

3 V-Chip Unrated Program Block

4 Channel Block

5 Front Panel Block

6 Lock Parental Controls

0 Exit

This channel has not been approved for viewing.

Change channel or press INFO to enter password and temporarily deactivate

Parental Controls

This screen appears when you try to tune to a channel or program that???s blocked by Parental Controls. Press DISPLAY on your remote to enter your password.

Parental Controls and V-Chip

The Parental Controls menu allows you to pr ogram your TV so that children cannot see certain programs, channels, or use the front panel controls.

The first three choices in the Parental Controls menu involve softwar e inside your TV (referred to as V -Chip) which allows you to block TV pr ograms and movies based on violence, sex, or other content you may believe children should not view. In other wor ds, it lets you pr ogram your TV so it won???t display certain programs.

Once you block programs, you or other adults can unblock programs by entering a password.

By default, the software inside your TV is turned ???off,??? so if you don???t want to use this feature, you can just ignore it.

Important Note About Parental Controls

Once you???ve locked Parental Controls, the TV blocks the picture of all channels and programs that you???ve set as blocked. The screen to the left appears when you try to tune to a pr ogram or channel that???s blocked.

To temporarily unlock Parental Controls when you see the screen to the left:

1.Press DISPLAY on your remote control.

Important: The on-screen display refers to an ???INFO??? button, which the remote that comes with your TV does not have. Use the DISPLAY button instead.

2.Use the number buttons on your remote to enter your password. If you want to cancel, press CLEAR.

3.Once you???ve successfully entered your password, press CLEAR to exit.

The Parental Controls function remains unlocked until the next time you turn on your TV.

V-Chip TV Rating Limit

The V-Chip TV Rating Limit lets you decide which TV pr ograms can and cannot be viewed.

To set TV programming limits:

1.Choose Parental Controls from the Main menu. If Parental Controls have previously been locked, you must enter your password. If they are not locked, you will get a message reminding you that your limits will not be effective until you lock Parental Controls.

2.Press MENU to continue.

3.Highlight and select V-Chip TV Rating Limit.

4.Once you get to the V-Chip TV Rating Limit screen, use the arrow buttons and MENU on your remote to change the status of a TV program rating or content theme from View to Block.

The following sections give you more details about how to change the status of TV program limits.

Rating Field

Lets you select from a

list of age-based ratings

you can block or view.

V-CHIP TV RATING LIMIT

Lists the content themes you

can block or view.

Content Status Fields

Lets you select which content themes to view for the selected rating, and whether the status of the content theme is currently View (V) or Block (B).

V-CHIP TV RATING LIMIT

Tip

When you change the status of a rating to

Block, the system will automatically block higher ratings and all corresponding content themes.

Hierarchy of Age-Based Ratings

Blocking Age-Based Ratings

You can automatically block all program ratings above a specified age-based rating level. For example, if you only want your child to watch programs that have a TV-G rating and lower (in other words, you want the child to watch TV-G, TV-Y7, and TV-Y), then you need to block out other programming with higher ratings.

To block programs with higher ratings:

1.First, determine the lowest level rating you don???t want the child to watch (see chart of age-based ratings on next page).

2.Press the VOL+ and VOL- buttons to highlight the Rating field.

age-based rating limits. Keep scrolling until the rating corresponding with the lowest rating you do not want the child to watch appears on the screen.

In the example discussed above, you would scroll through the Rating field until TV-PG appears, since the highest rating you want the child to watch is TV-G.

4.Press the VOL+ button to move the yellow highlight to the

Status field.

5. Press the CHAN^ or CHAN^ button to toggle between View and Block. The status for the rating listed to the left and all higher ratings automatically changes to Block (and B).

6.Press MENU on the remote to return to the menu or exit the screen when you are finished.

7.Select Lock Parental Controls from the Parental Controls menu. Enter a password, and if you have not already set your password, you will be prompted to enter it again to confirm.

Viewing Age-Based Ratings

After you block age-based ratings, you have the option of changing some of the ratings back to View.

1.Determine which blocked rating you want to view.

2. Use the CHAN^ and CHAN^ buttons to select the rating with a status of Block.

3.Press the VOL+ button to move the yellow highlight to the rating status field.

4.Press the CHAN^ button to select View.

Notes: The content status fields corresponding to the unblocked rating become View as well. They and the age-based rating status are the only fields that automatically change back to View when you complete this process.

You must remember to lock Parental Controls for rating limits to take

effect.

Content status fields

V-CHIP TV RATING LIMIT

Press ^/v to block programs with this content for this rating.

Content status fields

Blocking Specific Content Themes

You can block programs based on their content. (Content is represented by the D, L, S, V and FV on your screen. See the beginning of this section for details.) When you block a content theme for a particular rating, you automatically block that content theme for higher rated programs as well.

For example, if you do not want your child to watch programs that have adult language (L) rated TV-PG or higher, then you could block out all programming TV-PG and above containing adult language.

To block program content:

1.Determine the lowest level of content you don???t want the child to watch.

2. Use the CHAN^ and CHAN^ buttons on the remote to scroll through the age-based ratings until the rating that corresponds with the lowest content you do not want the child to watch appears. (In the example above, you would scroll through the ratings until the TV-PG rating appeared.)

3.Press the VOL+ button to move the highlight to the field corresponding with the content theme you wish to block out.

4. Press the CHAN^ or CHAN^ button to change content status from V to B. All higher ratings??? content theme will automatically change to B.

5.Press MENU to return to the menu or exit the screen.

Notes: Broadcasters are not required to provide content themes or age- based ratings. Programs received with no content themes will only be blocked if you block their age-based rating.

You must remember to lock Parental Controls for rating limits to take effect.

Viewing Specific Content Themes

If you block specific content themes, you have the option of going back and changing some of the content themes back to (V) View:

1.Determine the content themes you want to change to (V) View.

2. Use the CHAN^ and CHAN^ buttons to scroll through the age-based ratings until the rating whose content theme you want to change to View appears.

3.Press the VOL+ button to move the yellow highlight to a particular content theme status, such as the B under language (L) corresponding with TV-14.

4. Press the CHAN^ or CHAN^ button to change its status back to V. Your child would then be able to watch programs with TV-14 adult language content, but not programs with TV-PG or TV-MA language content.

Note: Only the content theme status corresponding to TV-14 (L) language changes to (V) View. Higher rated content themes, such as that for TV-MA language, do not change.

V-Chip Movie Rating Limit

You set movie rating limits by blocking movies rated above a specified level. How to block movie ratings and view movie ratings is explained in the next two sections.

To access the V-CHIP MOVIE RATING LIMIT menu:

1.Press MENU on the remote control (the TV MAIN MENU appears).

2.Select Parental Controls (press 6).

3.Select V-Chip Movie Rating Limit (press 2).

V-CHIP MOVIE RATING LIMIT

Press ^/v to view programs with this rating. Press MENU to exit.

XBlock

NC-17 Block

RBlock

GView

Blocking Movie Ratings

If you only want your child to watch movies that have a PG rating and lower (in other words, movies rated PG and G), then you could automatically block out all other movies with higher ratings.

To block movies:

1. Highlight the Rating field and press the CHAN^ and CHAN^ buttons to find the rating that is the lowest rating you don???t want the child to watch. (In the example above, you would highlight the rating status button corresponding to PG-13, since the highest rating you want the child to watch is PG.)

2.Press the VOL+ button to highlight the rating Status field. Press the CHAN^ and CHAN^ buttons to change the button from View to Block. All higher ratings automatically change to Block.

3.Press MENU to return to the menu or exit the screen.

4.If Parental Controls are not locked, you must lock them so the movie rating limits will take effect.

Note: Some movies may be given a Not Rated (NR) rating. After blocking movie ratings, you must set NR to View separately to view NR movies.

V-CHIP MOVIE RATING LIMIT

Press ^/v to block programs with this rating. Press MENU to exit.

XBlock

NC-17 View

RBlock

GView

Viewing Movie Ratings

After you block movie ratings, you have the option of changing some of the rating status buttons back to View:

For example, if movies with a rating of PG-13 and higher are blocked, you can change the rating status corresponding with NC-17. Your child would then be able to watch all movies with a G, PG, and NC-17 Rating.

3.Press MENU to exit the screen, and be sure parental controls are locked.

PARENTAL CONTROLS

1 V-Chip TV Rating Limit

2 V-Chip Movie Rating Limit

3 V-Chip Unrated Program Block

4 Channel Block

V-CHIP UNRATED PROGRAM BLOCK

5 Front Panel Block

6 Lock Parental Controls

0 Exit 1 View

2 Block

PARENTAL CONTROLS

Press ^ or v, keypad, or CH ^/v to set channel, MENU to exit.

V-Chip Unrated Program Block

Selecting this option lets you decide if programs that the V-Chip recognizes as ???unrated??? can be viewed. Note that ???unrated??? TV programs may include news, sports, political, religious, local and weather programs, emergency bulletins, public announcements, and programs without ratings.

View All unrated programs are available.

Block All unrated programs are not available.

Note: You must remember to lock Parental Controls for rating limits to take effect.

Channel Block

Selecting this option lets you decide what channels can be viewed. View Makes the selected channel viewable.

Block The front panel and remote control channel buttons will tune only to channels that you have marked as View. The remote will still tune to the blocked channel if you use the digits to access the channel, but the channel will be blocked.

Don???t forget to lock parental controls after you change the status of Channel Block. If you do not, the channel block will not take effect.

Note: If you have a digital cable box channels 126-999 can be blocked but will not be removable from your scan list.

PARENTAL CONTROLS

1 V-Chip TV Rating Limit

2 V-Chip Movie Rating Limit

3 V-Chip Unrated Program Block

4 Channel Block

5 Front Panel Block

6 Lock Parental Controls

Front Panel Block

Selecting this option lets you block (disable) or unblock (enable) the TV???s front panel. The remote still tunes to any channel. Front Panel Block can:

0 Exit

FRONT PANEL BLOCK

1 Unblock

2 Block

PARENTAL CONTROLS

1 V-Chip TV Rating Limit

2 V-Chip Movie Rating Limit

3 V-Chip Unrated Program Block

4 Channel Block

5 Front Panel Block

6 Lock Parental Controls

0 Exit

(When using this as a Parental Control method, you should remove access to any remote that is capable of operating the television while you have the front panel blocked.)

Don???t forget to lock parental controls after you change the status. If you do not, the front panel block will not take effect.

Lock/Unlock Parental Controls

Selecting this option lets you lock and unlock parental controls settings using a password.

If you do not lock parental controls, none of the settings for V-Chip, Channel

Block, or Front Panel Block will take effect.

If you forget your password, simultaneously press and hold MENU on the television and volume down on the remote for 3 seconds. Nothing appears on the screen, Parental Controls simply unlock and you can re-enter a password via

Lock Parental Controls.

TV MAIN MENU

1 Audio

2 Picture Quality

3 Screen

4 Channel

5 Time

6 Parental Controls

7 Setup

0 Exit

Tip

Feel free to explore the menu system.

If you???re ever unsure where you are in the menu system, or you???re just plain tired of exploring, press CLEAR to remove the menus from the screen and start over again.

Tip

If the control panel is not set to the current time, use the VOL + and

VOL ??? buttons to go back over the columns and the digits to make changes.

You can also enter numbers by using the CHAN ^ and CHAN v buttons on the remote.

BASIC PICTURE CONTROLS

Contrast

Color Tint Black Level Sharpness Press MENU to exit.

Menus

The first menu is called the Main menu. Press MENU on the remote or on the front panel to bring up the Main menu.

Menus take you to another menu or a control panel. There are two ways to select a choice in a menu:

???Use your CHAN and VOL buttons on your remote control to highlight your choice, and press MENU.

???Press a number button on the remote. For example, in the Main menu press 3 to go straight to the Screen menu.

Exiting a menu

There are three ways to exit a menu:

???Highlight Exit and press MENU.

???Press 0 on the remote.

???Press CLEAR. The on-screen displays are cleared from the screen and you return to TV viewing.

Control Panels

Control panels allow you to adjust the default settings on many features of your TV. Y ou can choose a setting, enter a number, or adjust a level such as tint or brightness. There are three types of control panels: sliders, numeric entry and choice lists.

Sliders

Sliders are used to make adjustments to a particular control.

To use a Slider in a menu:

1. Press the CHAN ^ or CHAN^ button to select the slider control for the feature you want to adjust.

2.Press the VOL+ or VOL- button to adjust the indicator line on the slider.

SET TIME

: AM

Enter01to12forthehour.

Press MENU to exit.

CLOSED-CAPTION MODE

1 CC1

2 CC2

3 CC3

4 CC4

5 Text 1

6 Text 2

7 Text 3

8 Text 4

TV MAIN MENU

1 Audio

2 Picture Quality AUDIO

3 Screen

4 Channel1 Mute

Numeric Entry

A numeric entry control panel is used to enter numbers or letters.

A pointer appears underneath the column you are changing.

1.Use the digits to^enter a number in the column above the pointer.

2.Press the VOL+ button to move to the next column, then use the digits to enter a number.

3.When you have finished entering information, press MENU.

Choice Lists

Choice lists are used to choose a particular setting from a list. When the choice list appears, the highlighted item is the one that is currently selected, or

???in use.???

Highlight a choice on a menu and press MENU to select that choice. You will then return to the previous screen.

Now that you know how to access the menus and adjust the control panels the following pages provide a brief explanation of all the menu features. The features are organized in order of their location on the Main Menu.

Audio Menu

Mute Press MENU to reduce the TV???s volume to its minimum level. Press MENU again to restore the volume.

Tone Controls Displays the slider controls for adjusting the TV???s treble, bass and balance.

Audio Processor Displays a choice list of available audio modes, which contr ol the way the sound comes through your speakers.

Mono Plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals.

Stereo Splits the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio. The word STEREO appears on the TV when you tune to a program that is broadcast in stereo.

Expanded Stereo Electronically ???widens??? sound from stereo broadcasts, stereo VCRs, digital satellite systems, DVD players, and LaserDisc players for a fuller, more spacious sound.

Sound Logic??? Stereo Reduces the annoying blasts in volume during commercial breaks, and also amplifies softer sounds in program material. Eliminates the need to constantly adjust volume control.

Second Audio Program (SAP) Plays the program???s audio in a second language, if one is available. The word SAP appears on the TV when you tune to a program that is broadcast with SAP information. SAP audio is broadcast in mono. SAP is also used to broadcast a program???s audio with descriptions of the video for the visually impaired.

TV MAIN MENU

1 Audio

2 Picture Quality

3 ScreenPICTURE QUALITY

4 Channel

5 Time1 Basic Picture Controls

62 Picture Presets

Picture Quality Menu

Basic Picture Controls Displays the five slider contr ols for adjusting the way the picture looks.

Contrast Adjusts the difference between the light and dark areas of the picture.

Color Adjusts the richness of the color.

Tint Adjusts the balance between the red and green levels.

Black Level Adjusts the brightness of the picture.

Sharpness Adjusts the crispness of the edges in the picture.

When exiting this menu, the Save Personal Picture Preset choice list will appear. You can choose either Yes or No. If you save the settings as a Personal Pictur e Preset, the TV will store the settings so you can re-select them quickly if someone changes the settings.

Picture Presets Displays a choice list that lets you select one of thr ee preset picture settings: Bright Lighting, Normal Lighting, Soft Lighting or Personal Picture Preset. Choose the setting that is best for your viewing envir onment.

Auto Color Displays a choice list that lets you turn on the feature that automatically corrects the color of the picture. (This is especially useful for tracking realistic flesh tone colors as you switch from channel to channel.) Choose On or Off, depending on your preference.

Color Warmth Displays a choice list that lets you set one of thr ee automatic color adjustments: Cool for a more blue palette of picture colors; Normal; and Warm for a more red palette of picture colors. The war m setting corresponds to the NTSC standard of 6500 K.

Screen Menu

Closed-Caption Display Displays a choice list that lets you choose the way closed captioning information is shown on the screen.

Off always No captioning information is displayed.

On always Captioning information is shown always, when available.

On when sound is muted Captioning information is shown, when available, whenever the TV???s sound is muted. (To mute the sound, press the MUTE button.) The captioning information is not displayed when the sound is not muted.

Closed-Caption Mode Displays a choice list that lets you choose which captioning mode is used for displaying captioning information.

Menu Language Displays a choice list that lets you select your preferred language for the menus: English, Spanish or French.

CLOSED-CAPTION MODE

1 CC1

2 CC2

3 CC3

4 CC4

5 Text 1

6 Text 2

7 Text 3

8 Text 4

Tip

If you don???t know which Closed-Caption mode to use, select CC1. CC1 is probably the mode that is used in your area. CC2, CC3, and CC4 are reserved for foreign languages, but are rarely used at this time.

Closed-Caption Modes

The TV offers eight closed-captioned modes, including four text modes.

To set the Closed-Caption Mode:

1.Select Screen from the Main menu.

2.Highlight Closed-Caption Mode and press MENU (the Closed-Caption Mode appears).

3.Highlight your choice and press MENU (the Screen menu appears again).

Note: The Text modes cover nearly half of the picture on the screen to display the closed-captioned text. Most broadcasters use the CC mode, which displays a few lines of captions at a time.

Turning off Closed-Caption

1.Select Screen from the Main menu.

2.Press MENU to select Closed-Caption Display.

3.Highlight Off Always and press MENU. The closed captioning is turned off and you go back to the Screen menu.

Channel Menu

Signal Type Displays a choice list that lets you select the curr ent antenna type.

UHF/VHF Antenna Choose this if you are currently using an off-air antenna for TV signals.

Cable TV Choose this if you are currently using cable or a cable box for TV signals.

Auto Channel Search Tells the TV to search automatically for all the channels available through the antenna input. When the TV finds an active channel, it places it in the Normal channel list; inactive channels (weak stations or channels with no signal at all) will be removed from the channel list.

List and Labels Displays a control panel that lets you edit your Normal channel list and choose a six-character label for each channel. Follow the on-screen directions to enter your channels and other information.

Channel # Use the CHAN and CHAN^ to scroll up and down through the channels available via your antenna. You can enter the channel number directly using the number buttons.

Tip

To enter a number greater than 99, press and hold ???1??? to enter the hundreds digit, then press the two remaining numbers.

TV MAIN MENU

1 Audio

2 Picture Quality

3 Screen

4 Channel

5 Time

6 Parental Controls

TIME

7 Setup

0 Exit1 Sleep Timer

2 Schedule

3 Set Time

0 Exit

Normal List Only the channels included in the Normal list are available when you scan up and down using CHAN and CHAN^. Use the CHAN and CHAN^ buttons to indicate whether the channel number indicated is included (Yes) or is not included (No) in the Normal channel list.

Channel Label Use the CHAN and CHAN^ buttons to enter a six-character label for each channel. Hold the button down to scroll quickly through the characters. The TV can store up to 27 labels in memory.

Time Menu

Sleep Timer Displays a contr ol panel that lets you select the amount of time you want to give the TV before it shuts itself off.

Schedule Displays a control panel that lets you set up a schedule for turning the TV on and off automatically. Reminder: you must turn the schedule On. The on-screen directions guide you through the steps needed to set the schedule.

Set Time Displays a control panel that lets you enter the current time. The on- screen directions guide you through the steps needed to set the time.