Model No. 831.28645.1

Serial No.

Serial Number

Decal (on underside

of frame)

???Assembly

???Operation

???Maintenance

???Part List and Drawing

CAUTION

Read all precautions and instruc- tions in this manual before using this equipment. Keep this manu- al for future reference.

ELLIPTICAL EXERCISER

User???s Manual

Sears, Roebuck and Co., Hoffman Estates, IL 60179

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover 90 DAY FULL WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WARNING DECAL PLACEMENT

The warning decal shown here has been applied in the location shown.

If the decal is missing or illegible, call 1-888-533-1333 and request a free replacement decal. Apply the decal in the location shown. Note: The decal may not be shown at actual size.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical exerciser before using your elliptical exerciser. Sears assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

1.Before beginning any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.

2.It is the responsibility of the owner to ensure that all users of the elliptical exerciser are adequately informed of all precautions.

3.Your elliptical exerciser is intended for home use only. Do not use your elliptical exerciser in a commercial, rental, or institutional set- ting.

4.Keep your elliptical exerciser indoors, away from moisture and dust. Place your elliptical exerciser on a level surface, with a mat beneath it to protect the floor or carpet. Make sure that there is enough clearance around your elliptical exerciser to mount, dismount, and use it.

5.Inspect and properly tighten all parts regu- larly. Replace any worn parts immediately.

6.Keep children under age 12 and pets away from your elliptical exerciser at all times.

7.Your elliptical exerciser should not be used by persons weighing more than 275 lbs. (124 kg).

8.Wear appropriate exercise clothes when exercising; do not wear loose clothes that could become caught on your elliptical exer- ciser. Always wear athletic shoes for foot protection.

9.Hold the handgrip pulse sensor or the upper body arms when mounting, dismounting, or using your elliptical exerciser.

10.Keep your back straight while using your elliptical exerciser; do not arch your back.

11.The pulse sensor is not a medical device. Various factors, including the user???s move- ment, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

12.When you stop exercising, allow the pedals to slowly come to a stop.

13.If you feel pain or dizziness while exercising, stop immediately and cool down.

14.Use your elliptical exerciser only as described in this manual.

3

BEFORE YOU BEGIN

Thank you for selecting the new PROFORM?? XP 160 elliptical exerciser. The PROFORM XP 160 elliptical exerciser provides a wide array of features designed to make your workouts at home more effective and enjoyable.

For your benefit, read this manual carefully before you use the elliptical exerciser. If you have ques- tions after reading this manual, please see the back

cover of this manual. To help us assist you, note the product model number and serial number before con- tacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a Phillips screwdriver , an adjustable

wrench , and a rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. IMPORTANT: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. If a part is missing, call 1-888-533-1333.

7

6.Identify the Left Handlebar (8), which is marked with a ???Left??? sticker. Insert the Left Handlebar into one of the Handlebar Legs (11) as shown.

Attach the Left Handlebar (8) with two M8 x 42mm Bolts (71) and two M8 Nylon Locknuts (96). Make sure that the Nylon Locknuts are inside the hexagonal holes.

Assemble the Right Handlebar (not shown) and the other Handlebar Leg (not shown) in the same way.

7.Position an Inner Handlebar Cover (18) and an Outer Handlebar Cover (19) around the Left Handlebar (8) as shown.

Attach the Inner and Outer Handlebar Covers (18, 19) with three M4 x 16mm Self-tapping Screws (79) and an M4 x 13mm Washer (93).

Start all three Self-tapping Screws before tightening them.

Repeat this step for the Right Handlebar (not shown).

6

8

Hexagonal

Hole

96

Hexagonal

Hole

7

18 79

8

10.Identify the Left Pedal (13) and the Left Pedal Leg (14), which are marked with ???Left??? stickers, and orient them as shown.

Attach the Left Pedal (13) to the Left Pedal Leg (14) with four M6 x 35mm Phillips Screws (87) and four M6 Split Washers (88). Start all four

Phillips Screws before tightening them.

Repeat this step to attach the Right Pedal (not shown) to the Right Pedal Leg (not shown).

Grease 32

94

98

Repeat this step for the Right Pedal Leg (not shown).

10

13.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.

11

HOW TO USE THE ELLIPTICAL EXERCISER

HOW TO MOVE THE ELLIPTICAL EXERCISER

Due to the size and weight of the elliptical exercis- er, moving it requires two persons. Stand in front of the elliptical exerciser, hold the upright, and place one foot against one of the front wheels. Pull on the upright and have a second person lift the base until the elliptical exerciser will roll on the front wheels. Carefully move the elliptical exerciser to the desired location, and then lower it to the floor.

HOW TO LEVEL THE ELLIPTICAL EXERCISER

base or

beneath the front stabilizer until the rocking motion is eliminated.

HOW TO EXERCISE ON THE ELLIPTICAL

EXERCISER

To mount the elliptical exerciser, hold the handlebars and step onto the pedal that is in the lower position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note:

The crank arm covers can turn in either direction. It is recommended that you turn the crank arm covers in the direction shown by the arrow below; however, for variety, you can turn the crank arm covers in the opposite direction.

To dismount the elliptical exerciser, wait until the ped- als come to a complete stop. Note: The elliptical exerciser does not have a free wheel; the pedals will continue to move until the flywheel stops.

When the pedals are stationary, step off the higher pedal first. Then, step off the lower pedal.

12

FEATURES OF THE CONSOLE

The advanced console offers an array of features designed to make your workouts more effective and enjoyable.

When you select the manual mode of the console, you can change the resistance of the pedals with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measure your heart rate using the handgrip pulse sensor.

The console also features five interactive cross train- ing programs designed to help you to burn calories and enhance your cardiovascular system while toning and strengthening your muscles. The cross training programs automatically control the resistance of the pedals and prompt you to perform a variety of strength exercises during your workout. Choose an upper body, lower body, or whole body cross training program to focus your workout. Note: The strength exercises require the use of dumbbells and an inflatable exer- cise ball (not included). To purchase dumbbells or an exercise ball, call 1-888-533-1333.

You can also use four calorie goal programs designed to help you burn 300 or 400 calories in 25, 30, or 45- minute workouts. The calorie goal programs automati- cally control the resistance of the pedals and prompt you to increase or decrease your pace while counting the calories you burn.

The console also offers a high performance program and a heart rate control program. The high performance program automatically changes the resistance of the pedals and prompts you to increase or decrease your pace as it guides you through an effective workout. The heart rate control program changes the resistance of the pedals and prompts you maintain a steady pace to keep your heart rate near a target heart rate while you exercise.

To use the manual mode of the console, follow the steps beginning on page 14. To use a cross training program, see page 16. To use a calorie goal pro- gram, see page 18. To use the high performance program, see page 19. To use the heart rate control program, see page 20.

Note: If there is a sheet of clear plastic on the face of the console, remove the plastic.

13

HOW TO USE THE MANUAL MODE

1.Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

2.Select the manual mode.

Each time you turn on the console, the manual mode will be selected automatically. If you have selected a program, reselect the manual mode by pressing the Programs button repeatedly until the words MANUAL MODE appear in the top of the dis- play.

3.Begin pedaling and change the resistance of the pedals as desired.

As you pedal, change the resistance of the pedals by pressing the Resistance increase and decrease buttons repeatedly. There are ten resistance lev- els. Note: After you press the buttons, it will take a moment for the pedals to reach the selected resis- tance level.

4.Follow your progress with the display.

The left side of the display???The left side of the display will show the elapsed time. Note:

When a program is selected, the display

will show the time remaining in the program instead of the elapsed time. An exception is the heart rate control program, which shows the elapsed time.

The left side of the display will also show your heart rate when you use the handgrip pulse sensor (see step 5 on page 15).

When a program is selected, the left side of the display will also show the approximate number of calories you have burned.

The center of the dis- play???When you select the manual mode, the center of the display will show a track that

represents 640 revolu-

tions. As you exercise, indicators will appear in succession around the track until the entire track appears. The track will then disappear and the indi- cators will again begin to appear in succession.

The center of the dis- play will also show the resistance setting of the pedals for a few sec- onds each time the resistance setting changes.

The right side of the display???The right side of the display will show the distance (total revolutions) you have

pedaled and your ped-

aling pace, (revolutions per minute [rpm]).

The top of the display???When you select the manual mode, the top of the display will show the approximate number of calories you have burned and the approximate number of grams of carbs you have burned.

14

Metal Contacts

5. Measure your heart rate if desired.

If there are sheets of clear plastic on the metal contacts on the handgrip pulse sen- sor, remove the plas-

tic. To measure your heart rate, hold the handgrip pulse sensor with your palms resting against the metal con-

tacts. Avoid moving your hands or gripping the contacts too tightly.

When your pulse is detected, a heart- shaped symbol will flash in the left side of

the display each time your heart beats, one

or two dashes will appear, and then your heart rate will be shown. For the most accurate heart rate reading, hold the contacts for at least 15 seconds. Note: If you continue to hold the handgrip pulse sensor, the display will show your heart rate for up to 30 seconds.

If your heart rate is not shown, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the metal contacts too tightly. For optimal perfor- mance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts.

6.Change the display color if desired.

Press the Display Color button repeatedly to select a backlight color for the display.

7.Turn on the fan if desired.

To turn on the fan at high speed, press the Fan button. To turn on the fan at low speed, press the button a second time. To turn off the fan, press the button a third time. Note: If the pedals do not move for a few minutes, the fan will automatically turn off to conserve the batteries.

8.When you are finished exercising, the console will turn off automatically.

If the pedals do not move for several seconds, a tone will sound and the console will pause.

If the pedals do not move for about five minutes and the buttons are not pressed, the console will turn off and the display will be reset.

15

Current Segment

HOW TO USE A CROSS TRAINING PROGRAM

1.Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

2.Select one of the five cross training programs.

To select a cross training program, press the Programs button repeatedly until the name of the desired cross training program appears in the dis- play. When a cross training program is selected, the program time will appear in the display and a profile of the resistance settings for the program will scroll across the matrix in the display.

When the first segment is completed, all resis- tance settings will move one column to the left. The resistance setting for the second segment will then be shown in the flashing Current Segment column and the resistance of the pedals will auto- matically adjust to the setting for the second seg- ment. Note: If all the indicators in the Current Segment column are lit, the resistance settings may move downward so that only the highest indi- cators appear in the matrix.

As you exercise, you will be prompted to keep your pedaling pace near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the display, increase your pace. When the words PEDAL SLOWER appear in the display, decrease your pace. When the words PEDALING IN RANGE appear, maintain your current pace.

3.Begin pedaling to start the program.

Each program is divided into 25, 30, or 45 one- minute segments. One resistance setting and one target rpm (revolutions per minute) setting are pro- grammed for most segments. (Note: The same resistance and/or target rpm setting may be pro- grammed for two or more consecutive segments.) During other segments, the console will prompt you to perform strength exercises.

The resistance setting for the first segment will

be shown in the flashing

Current Segment col- umn of the matrix. The

resistance settings for

the next several segments will be shown in the columns to the right. The target rpm setting will appear in the top of the display.

When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the resistance and/or target rpm is about to change, the resistance set- ting and/or the target rpm setting will appear in the display to alert you.

IMPORTANT: The target rpm settings are intended only to provide motivation. Your actu- al pace may be slower than the target rpm set- tings. Make sure to exercise at a pace that is comfortable for you.

If the resistance setting for the current segment is too high or too low, you can manually override the setting by pressing the Resistance decrease or increase buttons. Every few times you press a Resistance button, an additional indicator will appear or disappear in the Current Segment col- umn; if any of the columns to the right of the Current Segment column have the same number of lit indicators as the Current Segment column, an additional indicator may appear or disappear in those columns as well. IMPORTANT: When the current segment of the program ends, the ellip- tical exerciser will automatically adjust to the resistance setting for the next segment.

To stop the program at any time, stop pedaling. The time will begin to flash in the display. To restart the program, simply resume pedaling.

16

4.Perform the first strength exercise when prompted.

When the first strength exercise segment begins, the name of the first strength exercise will appear in the display for a few seconds. The time will pause and flash in the display. Next, the display will show the recommended number of repetitions for the first strength exercise.

Step off the elliptical

exerciser and pre- pare to begin the first strength exercise. Every few seconds, the console will

sound a tone; when a

tone sounds, perform one repetition of the exer- cise. Exercise with a slow, steady motion; do not perform more than one repetition each time a tone sounds. The display will count down the repetitions as you perform them.

Note: Refer to the accompanying exercise chart to see the correct form for each exercise. When per- forming lunges, alternate legs with each repetition. When performing dumbbell rows, perform half the repetitions with your right arm and half the repeti- tions with your left arm. The strength exercises require the use of dumbbells and an inflatable exercise ball (not included). To purchase dumb- bells or an exercise ball, call 1-888-533-1333.

5.Continue the cross training program.

When you have performed the recommended number of repetitions, the words START PEDAL- ING will appear in the display. To continue the cross training program, step onto the elliptical exerciser and start pedaling. the pedals will auto- matically adjust to the resistance setting for the next segment.

The program will continue in this way until the last segment ends. Then, the words PROGRAM DONE will appear in the display.

6.Follow your progress with the display.

See step 4 on page 14.

7.Measure your heart rate if desired.

See step 5 on page 15.

8.Change the display color if desired.

See step 6 on page 15.

9.Turn on the fan if desired.

See step 7 on page 15.

10.When you are finished exercising, the console will turn off automatically.

See step 8 on page 15.

17

HOW TO USE A CALORIE GOAL PROGRAM

1.Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

2.Select one of the calorie goal programs.

Press the Programs button repeatedly until the name of the desired calorie goal program appears in the display. When a calorie goal program is selected, the program time will appear in the dis- play and a profile of the resistance settings for the program will scroll across the matrix in the display.

3.Begin pedaling to start the program.

Each program is divided into 25, 30, or 45 one- minute segments. One resistance setting and one target rpm (revolutions per minute) setting are pro- grammed for each segment. Note: The same resis- tance setting and/or target rpm setting may be pro- grammed for two or more consecutive segments. The display for a calorie goal program work in the same way as the display for the cross training pro- grams (see step 3 on page 16).

As you exercise, you will be prompted to keep your pedaling pace near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the display, increase your pace. When the words PEDAL SLOWER appear in the display, decrease your pace. When the words PEDALING IN RANGE appear, maintain your current pace.

IMPORTANT: The target rpm settings are intended only to provide motivation. Your actu- al pace may be slower than the target rpm set- tings. Make sure to exercise at a pace that is comfortable for you. Note: If you manually over- ride the resistance settings of a calorie goal pro- gram, you may not reach your calorie goal.

To stop the program at any time, stop pedaling. The time will begin to flash in the display. To restart the program, simply resume pedaling.

When the last segment of the program ends, the words PROGRAM DONE will appear in the display.

4.Follow your progress with the display.

See step 4 on page 14.

5.Measure your heart rate if desired.

See step 5 on page 15.

6.Change the display color if desired.

See step 6 on page 15.

7.Turn on the fan if desired.

See step 7 on page 15.

8.When you are finished exercising, the console will turn off automatically.

See step 8 on page 15.

18

HOW TO USE THE HIGH PERFORMANCE

PROGRAM

1.Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

2.Select the high performance program.

Press the Programs button repeatedly until the words HIGH PERFORMANCE appear in the dis- play. The program time will appear in the display and a profile of the resistance settings for the pro- gram will scroll across the matrix in the display.

3.Begin pedaling to start the program.

The program is divided into 45 one-minute seg- ments. One resistance setting and one target rpm setting are programmed for each segment. Note: The same resistance setting and/or target rpm set- ting may be programmed for two or more consecu- tive segments. The displays for the high perfor- mance program work in the same way as the dis- plays for the cross training programs (see step 3 on page 16).

As you exercise, you will be prompted to keep your pedaling pace near the target rpm setting for the current segment. When the words PEDAL FASTER appear in the display, increase your pace. When the words PEDAL SLOWER appear in the display, decrease your pace. When the words PEDALING IN RANGE appear, maintain your current pace.

IMPORTANT: The target rpm settings are intended only to provide motivation. Your actu- al pace may be slower than the target rpm set- tings. Make sure to exercise at a pace that is comfortable for you.

To stop the program at any time, stop pedaling. The time will begin to flash in the display. To restart the program, simply resume pedaling.

When the last segment of the program ends, the words PROGRAM DONE will appear in the display.

4.Follow your progress with the display.

See step 4 on page 14.

5.Measure your heart rate if desired.

See step 5 on page 15.

6.Change the display color if desired.

See step 6 on page 15.

7.Turn on the fan if desired.

See step 7 on page 15.

8.When you are finished exercising, the console will turn off automatically.

See step 8 on page 15.

19

HOW TO USE THE HEART RATE CONTROL

PROGRAM

1.Press the Resistance decrease button or begin pedaling to turn on the console.

A moment after you turn on the console, the dis- play will light.

2.Select the heart rate control program.

Press the Programs button repeatedly until the words HEART RATE CONTROL appear in the dis- play.

heart rate is too far below or above the target heart rate, the resistance of the pedals will automatically increase or decrease to bring your heart rate closer to the target heart rate.

You will also be prompted to pedal at a steady pace so you can maintain your target heart rate. When the words PEDAL FASTER appear in the display, increase your pace. When the words PEDAL SLOWER appear in the display, decrease your pace. When the words PEDALING IN RANGE appear, maintain your current pace.

IMPORTANT: Make sure to exercise at a pace

that is comfortable for you. Note: If you manual- ly override the resistance settings, you may not maintain your target heart rate.

3. Enter a target heart rate.

The target heart rate setting for the program will flash in the display. Use the Resistance increase and decrease buttons to change the target heart rate setting.

4. Hold the handgrip pulse sensor.

It is not necessary to hold the handgrip pulse sensor continuously; however, you should hold the handgrip pulse sensor frequently for the

program to operate properly. Each time you hold the handgrip pulse sensor, keep your hands on the metal contacts for at least 30 seconds.

When you are not holding the handgrip pulse sen- sor, the letters PLS will appear in the display instead of your heart rate.

5.Begin pedaling to start the program.

During the program, the console will regularly com- pare your heart rate to the target heart rate. If your

To stop the program at any time, stop pedaling. The time will begin to flash in the display. To restart the program, simply resume pedaling.

6.Follow your progress with the display.

See step 4 on page 14.

7.Measure your heart rate if desired.

See step 5 on page 15.

8.Change the display color if desired.

See step 6 on page 15.

9.Turn on the fan if desired.

See step 7 on page 15.

10.When you are finished exercising, the console will turn off automatically.

See step 8 on page 15.

20

MAINTENANCE AND TROUBLESHOOTING

Inspect and tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately.

To clean the elliptical exerciser, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console display becomes dim, the batteries should be replaced; most console problems are the result of low batteries. See assembly step 12 on page 11 for replacement instructions.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the console does not display your heart rate when you hold the handgrip pulse sensor, or if the displayed heart rate appears to be too high or too low, see step 5 on page 15.

HOW TO LEVEL THE ELLIPTICAL EXERCISER

If the elliptical exerciser rocks slightly on your floor during use, see HOW TO LEVEL THE ELLIPTICAL EXERCISER on page 12.

HOW TO ADJUST THE DRIVE BELT

If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest setting, the

drive belt may need to be adjusted. To adjust the drive belt, first remove the screws from the left and right side shields (not shown). Gently pull the side shields apart and remove the convenience tray.

Next, locate the Idler Screw (68) and loosen it one half turn. Step onto the elliptical exerciser and move the pedals. If the pedals continue to slip, turn the Idler Screw another half turn and test the pedals again. Continue in this way until the pedals no longer slip. Then, replace the convenience tray and reattach the side shields.

21

EXERCISE GUIDELINES

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems.

The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determin- ing heart rate trends in general.

These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper inten- sity is the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates for fat burning and aerobic exercise.

To find the proper intensity level, find your age at the bottom of the chart (ages are rounded off to the near- est ten years). The three numbers listed above your age define your ???training zone.??? The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise.

Burning Fat???To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone.

Aerobic Exercise???If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone.

WORKOUT GUIDELINES

Warming up???Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise.

Training Zone Exercise???Exercise for 20 to 30 min- utes with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise???never hold your breath.

Cooling down???Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exer- cise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life.

22

STRENGTH TRAINING GUIDELINES

During strength exercises, you must maintain proper form for the best results. Maintaining proper form involves moving through the full range of motion for each exercise and moving only the appropriate parts of the body. Exercising in an uncontrolled manner will reduce the benefits of strength exercises. On the exer- cise chart accompanying this manual are photographs showing the correct form for several strength exercis- es.

Perform each repetition of each strength exercise smoothly and without pausing. The exertion phase of each repetition should last only about half as long as the return phase. Proper breathing is also important. Exhale during the exertion phase of each repetition and inhale during the return phase???never hold your breath.

To increase the size and strength of your muscles, you must work your muscles at a level close to their maxi- mum capacity. Your muscles will adapt and grow as you progressively increase the amount of weight that you use. You can tone your muscles by working them at a moderate percentage of their capacity. The proper amount of weight to use for each strength exercise depends on you???you must gauge your limits and select an appropriate amount of weight.

It is important to avoid overdoing it during the first few months of your exercise program. Progress at your own pace and be sensitive to your body???s signals. If you experience pain or dizziness at any time while exercising, stop immediately and cool down. Find out what is wrong before continuing. Remember that ade- quate rest and a proper diet are important factors in any exercise program.

23

24

Note: Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. *These parts are not illustrated. If a part is missing, call 1-888-533-1333.

25

10

65

80

26

64

19 41

81

80

11

33

98

25

89

5

6

86

17

3

36

4

85

48

93 79

79

11

66

33 98

33

74

74

47

52

55

1

26

49

81 EXPLODED DRAWINGA

Model??? 831 .No

49 .28645 .1

R0108A

27

33 94

91 33 31

32

31

94 91

60 98

54

94

30 91

12

32

41

41

91 94

85

24

83

95 34

13

14

41

46 46 85 42

88

88

87

86

79

79

98

94

86

88

29

79 91

54 94

6030

41

32

95

41 46

46

42

46 85 88

88 87

87

1.28645.831 .No Model???B DRAWING EXPLODED

R0108A

Get it fixed, at your home or ours!

Your Home

For repair???in your home???of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it!

For the replacement parts, accessories, and user???s manuals that you need to do-it-yourself.

For Sears professional installation of home appliances and items like garage door openers and water heaters.

1-800-4-MY-HOME?? (1-800-469-4663)

Call anytime, day or night (U.S.A. and Canada)

www.sears.com www.sears.ca

Our Home

For repair of carry-in items like vacuums, lawn equipment, and electronics, call or go on-line for the location of your nearest

Sears Parts & Repair Center.

1-800-488-1222 Call anytime, day or night (U.S.A. only)

www.sears.com

To purchase a protection agreement (U.S.A.)

or maintenance agreement (Canada) on a product serviced by Sears:

Para pedir servicio de reparaci??n a domicilio, y para ordenar piezas:

1-888-SU-HOGAR?? (1-888-784-6427)

??Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC

??Marca Registrada / TM Marca de F??brica / SM Marca de Servicio de Sears Brands, LLC

90 DAY FULL WARRANTY

If this Sears Elliptical Exerciser fails due to a defect in material or workmanship within 90 days of the date of purchase, call 1-800-4-MY-HOME?? (1-800-469-4663) to arrange for free repair (or replacement if repair proves impossible). The frame is warranted for 10 years.

This warranty does not apply when the Elliptical Exerciser is used commercially or for rental purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179