PRV-LX1 ??? Default Settings

OVERVIEW:

The PRV-LX1 recorder ships with default settings for a typical end-user. However, your requirements may differ. The Operating Instructions provide detailed information regarding changing these defaults or reassigning settings according to your preferences. This document lists the PRV-LX1???s default settings when shipped from the factory.

To return the PRV-LX1 to the factory default settings, follow the steps below.

1)Verify that the unit is in Standby mode.

2)Press and hold the STOP button on the recorder???s front panel.

3)Press and hold the Power button on the front panel.

4)Release both buttons simultaneously after the unit powers on.

Note: Returning the PRV-LX1 to the factory defaults does not erase or remove the imported clips or files.

PIB # 190102

TECHNICAL DETAILS:

The PRV-LX1 recorder provides default values for the following settings:

Edit ??? DVD Menu

Edit ??? Project

PIB # 190102

PIB # 190102

The information in this document is subject to change without notification.

ADDITIONAL INFORMATION:

Additional information is available under the Business Products Support area of the Pioneer website: http://www.pioneerelectronics.com/pna/business/product/support/home/0,,2076_4239,00.html.

For assistance please contact Pioneer Service at (800) 421???1613, your Pioneer representative (sales and technical: [CA] 310-952-2000 or [NJ] 201-327-6400) or refer to the Pioneer corporate website:

www.pioneerelectronics.com