Specifications

Tuner/Reception/Transmission

•Antenna location: Picture & sound: Internal, RC

extender: External

•Frequency range: picture & sound: 2.4 GHz RC

extender: 433 MHz MHz

•TV system: PAL, SECAM

•Typical range indoor: 15-30 m

•Typical range outdoor: 100 m

•Remote control extender

•Supported IR carrier frequency: 32-57 KHz

Accessories

•AC/DC Adaptor: 2x 12VDC, 500mA

•Remote control: Slim Card, with Batteries

Dimensions

•Receiver dimensions (W x H x D): 146 x 146 x 62 mm

Issue date 2008-10-14

Version: 4.0.8

12 NC: 9082 100 05004

EAN: 87 10895 90450 6

•Temperature (operation): +5ºC to +35ºC

•Transmitter dimensions (W x H x D): 270 x 146 x 62 mm

Power

•Power consumption: 15 W

•Power supply: AC/DC Adapter, 220-240V

Transmitter

•SCART 1: CVBS in, Audio L+R in

•SCART 2: CVBS in, Audio L+R in

•SCART 3: CVBS in, Audio L+R in, RGB in

•SCART 4: RGB, CVBS in/out, Audio L+R in/out

•SCART Out: RGB, CVBS out, Audio L+R out

•Audio out: RCA Stereo (Red/White)

Receiver

• SCART out: CVBS out, Audio L+R out

© 2008 Koninklijke Philips Electronics N.V. All Rights reserved.

Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

www.philips.com

Product highlights

Watch any device on a 2nd TV

The wireless link uses standard SCART and cinch plugs that are used by almost every brand of audio/video devices. If you device has one of these standard connectors it works with the wireless link

Connect 4 devices

The easy way to switch between your DVD player, satellite receiver, VCR or set-top box without having to reconfigure your entire home cinema set-up. The wireless TV link has four separate inputs, each with its own SCART connector, to allow you to connect up to four devices.

Choose 1 of 4 devices to watch

The easy way to switch between your DVD player, satellite receiver, VCR or set-top box without having to reconfigure your entire home cinema set-up. The wireless TV link has four separate inputs, each with its own SCART connector, to allow you to connect up to four devices.

Works with DVD and many more

Extend your possibilities for viewing movies, sports events, live performances and a range of TV channels anywhere in your home. The wireless TV link is suitable for transmission of AV content of all brands of PayTV and Pay-per-View decoders, satellite receivers, set-top boxes, DVD players, VCRs and camcorders.

Works on almost all brands

The wireless link uses standard SCART and cinch plugs that are used by almost every brand of audio/video devices.

One touch access to 4 devices

There's no need to swap cables at the transmitter to view any video device on the second TV. Simple press the input selection button to switch from input device.

Operates in closed cabinet

If you store your audio/video devices in a cabinet, you cannot operate these devices with a normal IR remote control. The Philips wireless remote control link allows you to operate these devices with the cabinet doors closed thanks to an RF-based link that picks up the infrared signals of a remote control and translates them into RF. The receiver unit then translates them back to IR.

Record sources independently

You can record any A/V input source - regardless of what you are watching on your main TV or on your second TV - thanks to this record function. You simply instruct the transmitter box which device should be recorded on your VCR or DVD-R.

Wireles means no drilling

A 2.4 GHz wireless link between the receiver and transmitter means you don't have to lay cables or drill holes through walls.

Wireless goes through walls

There's no need to buy or rent duplicate A/V equipment. The wireless RF system extends your possibilities for viewing DVD movies and your favorite Satellite or TV channels anywhere in your home. With a range of up to 30 meters inside the house, it delivers high-quality video and stereo audio no matter where your second TV is located.