Register your product and get support at

www.philips.com/welcome

19PFL3404H/12

22PFL3404H/12

26PFL3404H/12

32PFL3404H/12

42PFL3604H/12

19PFL3404D/12

22PFL3404D/12

26PFL3404D/12

32PFL3404D/12

42PFL3604D/12

19PFL3404D/05

22PFL3404D/05

26PFL3404D/05

EN User Manual

Downloaded From TV-Manual.com Manuals

This information is correct at the time of press. For updated information, see www.philips.com/support.

Downloaded From TV-Manual.com Manuals

Contents

EN 1

Downloaded From TV-Manual.com Manuals

1 Notice

2009 ?? Koninklijke Philips Electronics N.V. All rights reserved.

Speci???cations are subject to change without notice.Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those speci???ed herein, con???rmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Warranty

???Risk of injury, damage to TV or void of warranty! Never attempt to repair the TV yourself.

???Use the TV and accessories only as intended by the manufacturer.

???The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips Customer Support for service or repairs.

Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty.

Pixel characteristics

This LCD product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or

2 EN

1

2

bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Compliance with EMF

Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like

any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.

One of Philips??? leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the

products.

Philips is committed to develop, produce and market products that cause no adverse health effects. Philips con???rms that if its products are handled properly for their intended use, they are safe

to use according to scienti???c evidence

available today.

Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in

standardisation for early integration in its products.

Mains fuse (UK only)

This TV is ???tted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A).

Remove fuse cover and fuse.

The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type.

Downloaded From TV-Manual.com Manuals

3 Re???t the fuse cover.

In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable.

Copyright

VESA, FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association.

?? Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Note

???Only applicable to TVs supporting MPEG4-HD standard

All other registered and unregistered trademarks are the property of their respective owners.

English

EN 3

Downloaded From TV-Manual.com Manuals

2 Important

Read and understand all instructions before you use yourTV. If damage is caused by failure to follow instructions, the warranty does not apply.

Safety

???Risk of electric shock or ???re!

???Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.

???Never place the TV, remote control or batteries near naked ???ames or other heat sources, including direct sunlight.

To prevent the spread of ???re, keep candles or other ???ames away from the TV, remote control and batteries at all times.

???Never insert objects into the ventilation slots or other openings on the TV.

???When the TV is swivelled ensure that no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing.

???Risk of short circuit or ???re!

???Never expose the remote control or batteries to rain, water or excessive heat.

4EN

???Avoid force coming onto power plugs. Loose power plugs can cause arcing or ???re.

???Risk of injury or damage to the TV!

???Two people are required to lift and carry a TV that weighs more than 25 kg.

???When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a ???at, level surface that can support the combined weight of the TV and the stand.

???When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that result in accident, injury or damage.

???Risk of injury to children!Follow these precautions to prevent the TV from toppling over and causing injury to children:

???Never place the TV on a surface covered by a cloth or other material that can be pulled away.

???Ensure that no part of the TV hangs over the edge of the surface.

???Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to the wall or a suitable support.

???Educate children about the dangers of climbing on furniture to reach the TV.

???Risk of overheating! Never install the TV in a con???ned space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV.

???Risk of damage to the TV! Before you connect the TV to the power outlet, ensure that the power voltage matches

Downloaded From TV-Manual.com Manuals

the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.

???Risk of injury, ???re or power cord damage! Never place the TV or any objects on the power cord.

???To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times.

???When you disconnect the power cord, always pull the plug, never the cable.

???Disconnect the TV from the power outlet and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable.

???Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time.

???If the TV is transported in temperatures below 5??C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.

Screen care

???Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.

???Unplug the TV before cleaning.

???Clean the TV and frame with a soft, damp cloth. Never use substances such asalcohol, chemicals or household cleaners on the TV.

???Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.

???To avoid deformations and colour fading, wipe off water drops as soon as possible.

Disposal of your old product and

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste.

Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.

Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

EN 5

Downloaded From TV-Manual.com Manuals

3 TV overview

This section gives you an overview of commonly usedTV controls and functions.

Side controls and indicators

4

3

2

1

a POWER: Switches the product on or off. The product is not powered off completely unless it is physically unplugged.

bP/CH +/-: Switches to the next or previous channel.

c SOURCE: Selects connected devices.

dVOLUME +/-: Increases or decreases volume.

Remote control

22

21

20

19

18

17

16

15

1

2

3

4

5

6

7

8

9

10

11

12

13

14

6EN

Downloaded From TV-Manual.com Manuals

a (Standby-On)

???Switches the TV to standby if it is on.

???Switches on the TV if it is in standby.

b MENU

Toggles the main menu on or off.

cMHEG/TELETEXT

Toggles teletext on or off.

d SOURCE

Selects connected devices.

eColour buttons

Selects tasks or options.

fAD (Audio Descriptor) (For RF Digital TV only)

UK only: Enables audio commentary for the visually handicapped.

g OPTIONS

Accesses options relating to the current activity or selection.

hOK

Con???rms an entry or selection and displays the channel grid, when watching TV.

i (Navigation buttons)

Navigates through the menus.

j INFO

Displays program information, when available. If the information spans multiple pages, press OPTIONS to go to the next page .

k (Mute)

Mutes or restores audio output.

lP +/- (Programme +/-)

Switches to the next or previous channel. When the TV menu is on, this functions as Page Up/Down.

m0-9 (Numeric buttons)

Selects a channel or setting.

n PICTURE (Smart picture)

Launches the picture menu.

o SOUND(Smart Sound)

Launches the sound menu.

p +/- (Volume +/-)

Increases or decreases volume.

qBACK P/P (Previous channel)

???Returns to a previous screen.

???Returns to the previously viewed channel.

r GUIDE

Switches between channel grid and programme list.

sSUBTITLE (For RF Digital TV only)

Enables or disables subtitles.

tDEMO

Toggles the demonstration menu on or off.

u FORMAT

Selects a picture format.

v INCR. SURR

Enables Incredible Surround for stereo sources. Enables spatial mode for mono sources.

EN 7

English

Downloaded From TV-Manual.com Manuals

4Use your product

This section helps you perform basic operations (see ???Use more of your product??? on page 10).

Switch yourTV on/off or to standby

To switch on

???If the standby indicator is off, press POWER at the side of the TV.

???If the standby indicator is red, press

(Standby-On) on the remote control.

To switch to standby

???Press (Standby-On) on the remote

control.

?? The standby indicator switches to red.

To switch off

???Press POWER at the side of the TV. ?? The standby indicator switches off.

Tip

???Though your TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet.

8EN

Note

???If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- or SOURCE at the side of the TV.

Switch channels

???Press P +/- on the remote control or P/CH +/- on the side of the TV.

???Enter a channel number using the

Numeric buttons.

???Use the channel grid.

Note

???When you use a favourite list, you can only select those channels in the list.

Downloaded From TV-Manual.com Manuals

Watch connected devices

Note

???Switch on the device before selecting it as a source on the TV.

Use the source button

1Press SOURCE.

?? The source list appears.

2Press the Navigation buttons to select a device.

3Press OK to con???rm your choice.

??TheTV switches to the selected device.

AdjustTV volume

???Press to mute the sound.

???Press again to restore the sound.

English

Use teletext

1Press MHEG/TELETEXT.

?? The main index page appears.

2Select a page as follows:

???Press the Numeric buttons to enter a page number

??? Press P +/- or to view the next or previous page

???Press the Colour buttons to select a colour coded item

???Press BACK to return to a previously viewed page

3Press MHEG/TELETEXT to exit teletext.

Note

???For UK users only: Some digital TV channels offer dedicated digital text services (for example, BBC1).

??? DEMO, SUBTITLE, AD and BACK buttons on the remote control do not work when you are watching a channel with MHEG service. This limitation affects these models only: 19PFL3404D/05,22PFL3404D/05 and 26PFL3404D/05.

To increase or decrease volume

???Press +/-.

???Press VOLUME +/- on the side of the TV.

To mute or unmute sound

EN 9

Downloaded From TV-Manual.com Manuals

5Use more of your product

AccessTV menus

Menus help you to install channels, change picture and sound settings and access other features.

1Press MENU.

?? The menu screen appears.

Watch TV

2Press the to select and navigate through one of the following menus.

???[Watch TV]Switches back to the aerial source if another source is selected.

???[Setup]Accesses menus that allow you to change picture, sound and other TV settings.

???[Add new device]Adds new devices to the home menu.

3Press OK to con???rm your choice.

4Press MENU to exit.

Tip

???After selecting [Add new device], follow the on-screen instructions to select the correct device and connector.

10 EN

Remove devices from the home menu

If a device is no longer connected to theTV, remove it from the home menu.

1Press MENU

2Press to select a device to remove.

3Press OPTIONS.

?? The [Remove device] list appears.

4Press OK and select [Remove] to remove the device.

??The selected device is removed from the home menu.

Change picture and sound settings

Change picture and sound settings to suit your preferences.You can apply pre-de???ned settings or change settings manually.

Use settings assistant

Use the settings assistant to guide you through the best picture and sound settings.

1Press MENU.

2Press to select [Setup] > [Picture] > [Settings assistant].

3Press OK.

??The [Settings assistant] menu appears. Follow the on-screen instructions to choose your preferred picture settings.

Use smart picture

Use smart picture to apply pre-de???ned picture settings.

1Press PICTURE.

?? The [Smart picture] menu appears.

2Press to select one of the following smart picture settings.

Downloaded From TV-Manual.com Manuals

???[Personal]Lists customised personal picture settings.

???[Vivid]Maximises picture settings.

???[Standard]Adjusts picture settings to suit most environments and types of video.

???[Movie]Applies picture settings ideally suited for movie viewing.

???[Game]Applies picture settings maximised for fast-moving games.

???[Energy saving]Applies low-energy picture settings.

3Press OK to con???rm your choice.

??The selected smart picture setting is applied.

Manually adjust picture settings

1Press MENU.

2Press to select [Setup] >

[Picture].

3Press to select one of the following picture settings.

???[Smart picture]Accesses pre-de???ned smart picture settings.

???[Contrast]Adjusts the intensity of bright areas, keeping dark areas unchanged.

???[Brightness]Adjusts the intensity and details of dark areas.

???[Colour]Adjusts colour saturation.

???[Hue]Compensates colour variations in NTSC encoded transmissions.

???[Sharpness]Adjusts the level of sharpness in image details.

???[Noise reduction]Filters and reduces noise in an image.

resolution of details in bright colours. You can switch this feature on or off.

??? [PC mode]Adjusts the picture when a PC is connected to the TV via HDMI or DVI.

??? [Picture format]Changes the picture format.

??? [Horizontal shift]Adjusts the picture horizontally for PC-VGA, DVI, HDMI or YPbPr.

??? [Vertical shift]Adjusts the picture vertically for PC-VGA, DVI, HDMI or YPbPr.

Change picture format

1 Press FORMAT.

?? A picture format bar appears.

2 Press or FORMAT to select a picture format.

??The selected picture format is activated.

3Press OK to con???rm your choice.

EN 11

Downloaded From TV-Manual.com Manuals

Summary of picture formats

The following picture settings can be con???gured.

Note

???Depending on the format of the picture source, some picture settings are not available.

[Auto format](Not for PC mode.) Enlarges the picture automatically to best ???t the screen. The subtitles remain visible.

[Super zoom](Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion.

[4:3]Shows the classic 4:3 format.

[Subtitle zoom]Displays 4:3 pictures over the full area of the screen, with sub-titles visible. Part of the top of the picture is clipped off.

[Movie expand 14:9](Not for HD and PC mode.) Scales 4:3 format to 14:9.

[Movie expand 16:9](Not for HD and PC mode.) Scales 4:3 format to 16:9.

[Wide screen]Stretches the classic 4:3 format to 16:9.

12 EN

[Unscaled]For HD and PC mode only, and in selected models only. Allows maximum sharpness. Some distortion may

be present due to the broadcaster???s systems. Set your PC resolution to wide screen mode for best results.

Use smart sound

Use smart sound to apply pre-de???ned sound settings.

1Press SOUND.

?? The [Smart sound] menu appears.

2Press to select one of the following smart sound settings.

???[Standard]Adjusts sound settings to suit most environments and types of audio.

???[News]Applies sound settings ideally suited for spoken audio, such as the news.

???[Movie]Applies sound settings ideally suited for movies.

???[Personal]Applies the settings that were customised in the sound menu.

3Press OK to con???rm your choice.

??The selected smart sound setting is applied.

Adjust sound settings

1Press MENU.

2Press to select [Setup] > [Sound]. ?? The [Sound] menu appears.

Downloaded From TV-Manual.com Manuals

3Press to select one of the following sound settings.

???[Smart sound]Accesses pre-de???ned smart sound settings.

???[Bass]Adjusts the bass level.

???[Treble]Adjusts the treble level.

???[Volume]Adjusts the volume.

???[Vol.vis.impaired]Sets the mix of visually impaired audio with regular audio. When available, visually impaired audio includes audio descriptions of on-screen action. You can also enable this by pressing AD

(Audio Descriptor).

???[Balance]Adjusts the balance of the right and left speakers to best suit your listening position.

???[Audio language]Available for digital channels, when multiple languages are broadcast. Lists available audio languages.

???[Dual I-II]Selects between audio languages if dual sound is broadcast.

???[Mono/Stereo]Selects between mono or stereo if stereo is broadcast.

???[TV speakers]Turns TV speakers on or off.

???[Surround]Enables spatial sound.

???[Auto volume]Automatically reduces sudden volume changes, for example, when switching channels. When enabled, this produces a more consistent audio volume.

Use advanced teletext features

Access the teletext options menu

Most of the advanced teletext features are accessed via the teletext options menu.

1Press MHEG/TELETEXT.

?? The teletext screen appears.

2Press OPTIONS.

?? The teletext options menu appears.

3 Press to select one of the following options.

???[Freeze page]Freezes the current page.

???[Dual/Full screen]Enables and disables dual screen teletext, which splits the current channel or source to the left of the screen, with teletext on the right.

???[Reveal]Hides or reveals hidden information on a page, such as solutions to riddles or puzzles.

???[Cycle subpage]Cycles through subpages automatically if subpages are available.

???[Language]Switches to a different language group to display a language correctly when that language uses a different character set.

4Press OK to con???rm your choice.

5Press MHEG/TELETEXT to exit the teletext options menu.

EN 13

Downloaded From TV-Manual.com Manuals

Select teletext subpages

A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number.

1Press MHEG/TELETEXT .

?? The teletext screen appears.

2Press to select a teletext page.

3Press to enter a subpage.

SelectT.O.P. teletext broadcasts

Table Of Pages (T.O.P.) teletext broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletext is not broadcast on all TV channels.

1Press MHEG/TELETEXT.

?? The teletext screen appears.

2Press INFO.

?? TheT.O.P. overview appears.

3Press to select a subject.

4Press OK to view the page.

Create and use lists of favourite channels

You can create lists of your preferredTV channels and radio stations so that you can ???nd those channels easily.

Tip

???You can create and store up to four favourite lists on your TV.

Select a favourite list

1When watching TV, press OK to display the channel grid.

2Press OPTIONS.

?? The channel options menu appears.

14 EN

3Press to select [Show fav. ch.] and

press OK.

?? The favourite lists appear.

4Press to select a favourite list and press OK.

??Only channels in the favourite list appear in the channel grid.

Note

???The favourite channel grid is empty until you add channels into the favourite lists.

View all channels

You can exit a favourite list, and view all installed channels.

1When watching TV, press OK to display the channel grid.

2Press OPTIONS.

?? The channel options menu appears.

3Press to select [Show fav. ch.] > [All].

4Press OK.

??All channels are displayed in the channel grid.

Note

???All favourite channels will be marked by an asterisk when you view the channel grid.

Add a channel to a favourite list

Tip

???View all channels before adding a channel to a favourite list.

1 When watching TV, press OK to display the channel grid.

2Press to select a channel you want to add to a favourite list.

3Press OPTIONS.

?? The channel options menu appears.

Downloaded From TV-Manual.com Manuals

4Press to select [Mark as favourite]

and press OK.

?? The favourite lists appear.

5Press to select a favourite list to add the channel to.

6Press OK.

??The channel is added to the favourite list.

Tip

???When watching TV, save the current channel in a favourite list by pressing OPTIONS >

[Mark as favourite].

Remove a channel from a favourite list

Note

???Select the favourite list to edit, before removing a channel.

1 When watching TV, press OK to display the channel grid.

2Press OPTIONS.

?? The channel options menu appears.

3Press to select [Show fav. ch.] and press OK.

4Press to select a favourite list and

press OK to edit.

?? The favourite channel grid appears.

5Press to select a channel that you wish to remove from the list.

6Press OPTIONS.

7Press to select [Unmark as fav.] and press OK.

??The channel is removed from the favourite list.

???View a list of digital programmes being broadcast

???View upcoming programmes

???Group programmes by genre

???Set reminders when programmes start

???Set up preferred EPG channels

Switch on EPG

1 When watching TV, press GUIDE.

??The EPG planner screen appears displaying information about the scheduled programmes.

Note

???EPG data is available only in selected countries and can take some time to load.

Tip

???Press GUIDE to switch between EPG and channel grid.

Use EPG

1 When watching TV, press GUIDE. ?? The EPG planner screen appears.

2 Press MENU.

?? The program guide menu appears.

3 Press to select an option, and then press OK to con???rm it.

4Press MENU to exit the EPG menu.

Note

???Only the channels marked with [x] in the [Pref. EPG channel] list, appear in the EPG menu.

EN 15

Downloaded From TV-Manual.com Manuals

Use the EPG options menu

Use the EPG options menu to set or clear reminders, change day and access other useful EPG options.

1Press GUIDE.

2Press OPTIONS.

?? The EPG menu appears.

3Press to select one of the following options.

???[Set remind]/ [Clear remind]

???[Change day]

???[Show info]

???[Search by genre]

???[Schedule reminders]

???[Pref. EPG channel]

4Press OK to enter or activate the option.

5Press BACK to exit the EPG menu.

Tip

???Press GUIDE to switch between EPG and channel grid.

Use timers

You can set timers to switch theTV on or switch to standby at a speci???ed time.

Automatically switch theTV to standby (sleeptimer)

Sleeptimer switches the TV to standby after a pre-de???ned period of time.

Tip

???You can always switch off your TV earlier or reset the sleeptimer during the countdown.

1Press MENU.

2Press to select [Setup] >

[Features] > [Sleep timer].

?? The bar appears.

16 EN

3Press to set the sleep time.

??The sleeptimer can be up to 180 minutes in steps of ???ve minutes. If set to zero minutes, the sleeptimer is switched off.

4Press OK to activate the sleeptimer.

??TheTV switches to standby after the pre-de???ned period of time.

Automatically switch theTV on (on timer)

You can switch the TV to a speci???ed channel at a speci???ed time, from standby or power-on mode.

1Press MENU.

2Press to select [Setup] >

[Features] > [On timer].

3Press OK or to enter the [On timer] menu.

???[Activate] Selects the frequency to

[Off] or [Once] or [Daily].

???[Time] Sets the starting time to switch on the TV automatically.

???[Programme no.] Selects the channel.

4Press MENU to exit.

UseTV lock and parental ratings

You can prevent your children from watching certain programmes or certain channels by locking theTV controls and by using ratings.

Downloaded From TV-Manual.com Manuals

Set or change code

1Press MENU.

2Press to select [Setup] >

[Features] > [Set code].

3Press OK or to enter the code setup.

4Enter your code using the Numeric buttons.

5Re-enter the same code in the new dialogue box for con???rmation.

??If the code is set successfully, the dialogue box will disappear. However, if the code cannot be set, a new dialogue box will prompt you to re-enter the code.

6If you want to change the code, select

[Setup] > [Features] > [Change code].

7Enter your current code using the

Numeric buttons.

??If the code is validated, a new dialogue box will prompt you to enter your new code.

8Enter the new code using the Numeric buttons.

??A message appears prompting you to enter the new code again for con???rmation.

Tip

???If you forget your code, enter ???8888??? to override any existing codes.

Lock or unlock theTV

Locking the TV prevents your child from accessing all channels and connected devices.

1Press MENU.

2Press to select [Setup] >

[Features] > [TV lock].

??A screen appears prompting you to enter a code.

3Enter your code using Numeric buttons. ?? The [TV lock] menu appears.

4Press to select [Lock] or [Unlock].

locked or unlocked.

Note

???If you select [Lock], you have to enter your code every time you turn on your TV to access all channels and connected devices.

Lock one or more channels

1When watching TV, press OK to display the channel grid.

2 Press to select a channel to lock.

3Press OPTIONS.

?? The channel options menu appears.

4 Press to select [Lock channel] and press OK to enter.

??A code setup screen prompts you to enter your current code (only at ???rst selection).

5Enter your code and press OK.

6Repeat the steps to lock more channels.

Note

??? Restart the TV for the change to take effect.

Unlock one or more channels

1When watching TV, press OK to display the channel grid.

2 Press to select a locked channel to unlock.

3Press OPTIONS.

?? The channel options menu appears.

4 Press to select [Unlock channel] and press OK.

??A code setup screen prompts you to enter your current code (only at ???rst selection).

EN 17

Downloaded From TV-Manual.com Manuals

Tip
Note

5Enter your code and press OK.

6Repeat the process to unlock more channels.

Note

???Restart the TV for the change to take effect.

???If you use P +/- on your remote control to switch between channels, the locked channels are skipped.

???If you access the locked channels from the channel grid, a screen prompting you to enter your current code appears.

Set parental ratings

Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings higher than your child???s age.

1Press MENU.

2Press to select [Setup] >

[Features] > [Parental rating].

?? A code setup screen appears.

3Enter your code using Numeric buttons. ?? The parental rating menu appears.

4Press to select an age rating.

5Press OK to con???rm.

6Press MENU to exit.

Use subtitles

You can enable subtitles for eachTV channel. Subtitles are broadcast via teletext or DVB- T digital broadcasts.With digital broadcasts, you have the additional option of selecting a preferred subtitle language.

Enable subtitles on analogueTV channels

1Select an analogue TV channel.

2Press MHEG/TELETEXT.

18 EN

3Enter the three-digit page number of the subtitle page with the Numeric buttons.

4Press MHEG/TELETEXT to switch off teletext.

5Press SUBTITLE.

?? The [Subtitle mode] menu appears.

6Select [On] to display subtitles always or [On during mute] to display subtitles only when audio is muted.

7Press OK to enable subtitles.

???Repeat this procedure to enable subtitles on each analogue channel.

???Select [Subtitle mode] > [Off] to disable subtitles.

Enable subtitles on digitalTV channels

1When watching digital channels, press

SUBTITLE.

?? The [Subtitle mode] menu appears.

2Select [On] to display subtitles always or [On during mute] to display subtitles only when audio is muted.

3Press OK to enable subtitles.

Select a subtitle language on digitalTV channels

Note

???When you select a subtitle language on a digital TV channel as described below, the preferred subtitle language set in the installation menu is temporarily overruled.

1Press MENU.

2Press to select [Setup] >

[Features] > [Subtitle language].

Downloaded From TV-Manual.com Manuals

3Press OK or to enter the list of available languages.

4Press to select a subtitle language.

5Press OK to enable your selection.

Tip

???You can also access [Subtitle language] menu while watching TV by pressing OPTIONS >

[Subtitle language].

Use theTV clock

You can display a clock on theTV screen.The clock displays the current time using time data received from yourTV service operator.

Display theTV clock

1When watching TV, press OPTIONS. ?? TheTV option menu appears.

2Select [Clock].

3Press OK.

Note

???To disable the clock, repeat the above procedure.

Change the time zone

[Installation] > [Clock] > [Time zone].

3 Press to select your time zone.

4Press OK to con???rm.

Note

???This option is only available if you select [Auto clock] > [Manual] (In countries with clock transmission data).

Use daylight saving

1 Press MENU.

2 Press to select [Setup] >

[Installation] > [Clock] > [Daylight saving].

3 Press OK or to enter [Daylight saving].

4 Press to select [Standard time] or

[Daylight saving time].

5Press OK to enable your selection.

Note

???This option is only available if you select [Auto clock] > [Manual].

Change the clock mode

1Press MENU.

2Press to select [Setup] >

[Installation] > [Clock] > [Auto clock].

3Press OK or to enter the [Auto clock] menu.

4Press to select [Automatic] or

[Manual].

5Press OK to con???rm.

View photos and play music from a USB storage device

Caution

???Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device.

YourTV is ???tted with a USB connector that enables you to view photos or listen to music stored on a USB storage device.

EN 19

Downloaded From TV-Manual.com Manuals

1Turn on the TV.

2Connect the USB device to the USB port

on the side of your TV.

?? The home menu appears.

Add new device

Setup

3Press to select [Browse USB].

4Press OK to con???rm.

?? The USB thumbnail browser appears.

Tip

???Press GUIDE to switch between thumbnail and ???le browsing views.

View photos

1In the USB thumbnail browser, select [Picture] and press to enter.

2Press GUIDE to switch between thumbnail and ???le browsing views.

3Press to select a photo or a photo album.

4Press OK to view the selected photo in full screen mode.

Tip

???When in full screen mode, press to move between photos.

View a slide show of your photos

1When a full screen image of a photo is displayed, press OK.

??A slide show begins from the selected image.

20 EN

2Press:

???OK to pause the slide show.

??The icon appears.

???Press to go back or move forward to the next image.

??? BACK to stop the slide show.

Change slide show settings

1When viewing a slide show, press

OPTIONS.

?? The slide show options menu appears.

2Press to select one of the following.

???[Start/Stop slide.]Starts or stops a slide show.

???[Slideshow trans.]Sets the transition from one picture to the next.

???[Slideshow freq.]Sets the amount of time that a picture is shown.

???[Rotate image]Rotates a picture.

???[Show info]Displays the picture name, date, size and next picture in the slide show.

3Press OK to con???rm your setting.

Note

???[Rotate image] and [Show info] appear only when you press OK or to pause the slideshow.

Listen to music

1In the USB thumbnail browser view, select [Music] and press to enter.

2Press GUIDE to switch between thumbnail and ???le browsing views.

3Press to select music or a music album.

4Press OK to play the selected music.

Downloaded From TV-Manual.com Manuals

Music settings

When listening to music, pressOPTIONS to access one of the following music settings.

???[Start/Stop play]

???[Repeat/Play once]

???[Shuf???e on/off]

???[Show info]

???[TV speakers]

Disconnect a USB storage device

Caution

???Follow this procedure to avoid damage to your USB storage device.

1Press BACK to exit the USB browser.

2Wait for ???ve seconds before you disconnect the USB storage device.

Listen to digital radio channels

If digital broadcasting is available, digital radio channels are installed automatically during installation.

1When watching TV, press OK to display the channel grid.

2Press OPTIONS.

3Press to select [Filter channels] >

[Radio].

?? The radio channel grid appears.

4Press to select a radio channel and press OK to listen.

Note

???Select [Filter channels] > [All] to exit radio channels and view all channels.

Update theTV software

Check the current software version

[Software update] > [Current software].

??TheTV displays the current software information.

Update software (digital broadcasts)

You can update the TV software via a USB device or OAD.

Update using a USB device

Connect your USB device to the USB port at the side of your TV.

1If the software update screen does not appear automatically, select [Setup] >

[Software update] > [Local updates]

> [USB] to update the TV software manually.

2Follow the on-screen instructions to complete the update.

Note

???The TV restarts after the software update is complete.

Update using OAD (On the Air software Download)

1If using (DVB-T) digital broadcast, your TV automatically receives software updates. If you receive a message on your screen asking you to update your software:

EN 21

Downloaded From TV-Manual.com Manuals

???Select [Update now] to update the software immediately.

???Select [Remind me later] to exit the update screen at that time and be reminded later.

???Select [Cancel] to skip the update.

2If you select [Cancel], you can manually access the OAD update by selecting

[Setup] > [Software update] > [Local updates] > [OAD].

3Select the available version of OAD and press OK.

4Follow the on-screen instructions to start the update.

Note

???The TV restarts after the software update is complete.

ChangeTV preferences

1Press MENU.

2Press to select [Setup] >

[Installation] > [Preferences].

3Press OK or to enter [Preferences].

???[Location]Optimises TV settings for your location - home or shop.

???[Volume bar]Displays the volume bar when adjusting the volume.

???[Channel info.]Displays information about the TV channel every time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information.

???[EasyLink]Enables one-touch play and one-touch standby between EasyLink-compliant devices.

???[E-sticker]For shop mode only. Sets the location of the e-sticker.

22 EN

Access decoder channel

You can map channels provided through a decoder or descrambler to yourTV channel selection. In this way, you can select these channels by using the RC of yourTV.The decoder or a descrambler must be connected to EXT1 (SCART).

Set decoder channel

Map channels from a decoder or descrambler

1Press MENU.

2Press to select [Setup] >

[Installation] > [Preferences] > [Decoder].

3Press OK or to enter [Decoder] menu

.

4Press to select [Channel] and press OK or to enter.

??A list of analogue channels appears on the screen.

5Press to select one channel to map to the decoder/descrambler channel and press OK to con???rm.

6Select [Status] and press OK or to enter.

7Press to select [EXT 1] (SCART) the connector used by the decoder/ descrambler.

8Press OK.

9Press MENU to exit.

Start aTV demo

1Press DEMO on the remote control.

2Press to select a demo and press OK to view it.

3Press DEMO to exit.

Downloaded From TV-Manual.com Manuals

Reset theTV to factory settings

You can restore the default picture and sound settings of yourTV. Channel installation settings remain the same.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Factory settings].

3Press OK or to enter the [Factory

settings] menu.

?? A factory setting message appears.

4Select [Reset] to start resetting.

5 Press MENU to exit.

English

EN 23

Downloaded From TV-Manual.com Manuals

6 Install channels

The ???rst time you set up yourTV, you are prompted to select a menu language and to installTV and digital radio channels (if available). This chapter provides instructions on how to re-install and ???ne tune channels.

Automatically install channels

This section describes how to search and store channels automatically.

Step 1 Select your menu language

1Press MENU.

2Press to select [Setup] >

[Installation] > [Language] > [Menu language].

3Press OK or to enter [Menu language].

4Press to select a language setting.

5Press OK to con???rm.

6Press to return to [Installation] menu.

Step 2 Select your country

Select your country for proper channel installation.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel install.] > [Channel assistant].

24 EN

3Press OK or to enter the menu. ?? The country menu appears.

4Press to select your country.

5Press OK to con???rm your choice.

??The channel installation guide appears on the screen.

Step 3 Install channels

Install the available analogue and digital TV channels and digital radio channels automatically.

1From the channel installation guide screen (see ???Step 2 Select your country??? on page 24), select [Full installation] to automatically install all TV channels and digital radio channels.

Start automatic installation.

This takes a few minutes.

Full installation

Skip installation

2Press OK to con???rm.

??TheTV starts to search and store all the available channels.

Downloaded From TV-Manual.com Manuals

Stop

3When installation is complete, press OK to return to [Installation] menu.

Step 4 Update the channel list

You can choose to enable auto update of channels, if your TV is in standby mode. If you enable this feature, the channels stored in your TV will be updated every morning according to the channel information in the broadcast.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel install.] > [Standby update].

3Select [On] to enable the automatic update or select [Off] to disable it.

Manually install channels

This section describes how to search and store analogueTV channels manually.

Step 1 Select your system

Note

???Skip this step if your system settings are correct.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel install.] >

[Analogue: Manual].

?? The [Analogue: Manual] menu appears.

Downloaded From TV-Manual.com Manuals

3 Press OK or to enter [System] menu.

4 Press to select your country or region.

5Press OK to con???rm.

6 Press to return to [Channel install.] menu.

Step 2 Search and store newTV channels

1 Press MENU.

2 Press to select [Setup] >

[Installation] > [Channel install.] > [Analogue: Manual].

?? The [Analogue: Manual] menu appears.

3 Press to select [Search] and then OK or to enter [Search].

4 Press to manually enter the three- digit frequency.

5Press OK to begin search.

??If a channel is unavailable at the selected frequency, press OK to search for the next available channel.

6Press BACK when the new channel is found.

7 Press to select [Store new channel] to store the new channel under a new channel number.

8 Press OK or to enter [Store new channel] and press OK.

9 Press to return to the [Analogue: Manual] menu.

EN 25

Step 3 Fine-tune analogue channels

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel install.] >

[Analogue: Manual].

?? The [Analogue: Manual] menu appears.

3Press to select [Fine-tune] and then

OK or to enter [Fine-tune].

4Press to adjust frequency.

5Press OK when done.

6Press to select [Store current channel] to store the ???ne-tuned channel under the current channel number.

7Press OK or to enter [Store curr. chan.] and press OK.

8Press to return to the [Channel install.] menu.

Rename channels

Channels can be renamed so that a name of your choice appears whenever the channel is selected.

1When watching TV, press OK to display the channel grid .

2Press to select the channel you want to rename.

3Press OPTIONS.

?? The channel options menu appears.

4Press to select [Rename channel].

?? A text input box appears.

5Press to select and change characters.

6Select [Done] to ???nish renaming channels.

Tip

???Use [Aa] to change upper-case letter to lower- case letter and vice versa.

26 EN

Reorder channels

After you install channels, you can rearrange the order in which they appear.

1When watching TV, press OK to display the channel grid .

2PressOPTIONS.

?? The channel options menu appears.

3Press to select [Reorder] and then OK to return to the channel grid.

4Press to select the channel you

want to reorder and press OK.

?? The selected channel is highlighted.

5Press to move the highlighted channel to your preferred position.

6Press OPTIONS.

??[Done reordering] appears on the screen.

7Press OK to ???nish reordering.

Test digital reception

If using digital broadcasts, you can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel install.] > [Digital: test recept].

3Press OK or to enter the menu.

4Press to enter the frequency of the channel you want to test.

5Press OK to con???rm the frequency and then press OK again to con???rm [Search].

6When complete, select [Store] to store the frequency.

Note

???If the signal quality and strength is poor, reposition the antenna or satellite dish and retest.

???If you still have problems with the reception of your digital broadcast, contact a specialised installer.

Downloaded From TV-Manual.com Manuals

7 Connect devices

This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start.

Note

???Different types of connectors may be used to connect a device to your TV, depending on availability and your needs.

Back connector for 19-22 inchTV

8 7

aPC IN (VGA and AUDIO IN)

Audio and video input from a computer.

bEXT 2 (Y Pb Pr and AUDIO L/R)

Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.

EN 27

Downloaded From TV-Manual.com Manuals

cEXT 1 (CVBS and RGB)

Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.

dTV ANTENNA

Signal input from an antenna, cable or satellite.

eAV OUT (VIDEO OUT and AUDIO OUT L/R)

Audio and video output to analogue devices such as another TV or a recording device.

fSPDIF OUT

Digital audio output to home theatres and other digital audio systems.

gHDMI 1

Digital audio and video input from high- de???nition digital devices such as Blu-ray players.

Connections via DVI or VGA require an additional audio cable (see ???Connect a computer??? on page 31).

hSERV. U

For software update.

28 EN

Downloaded From TV-Manual.com Manuals

Back connector for 26 inch TV and larger

bEXT 3 (Y Pb Pr and AUDIO L/R)

Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.

English

SPDIF

OUT

aHDMI 1 (HDMI and AUDIO IN)

Digital audio and video input from high- de???nition digital devices such as Blu-ray players.

Audio input from devices that require a separate audio connection, such as a computer.

Connections via DVI or VGA require an additional audio cable (see ???Connect a computer??? on page 31).

cEXT 1 (RGB and CVBS)/EXT 2 (CVBS)

Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. EXT 2 supports S-Video.

EXT1/ EXT2

(RGB/CVBS)/ (CVBS)

EN 29

Downloaded From TV-Manual.com Manuals

dTV ANTENNA

Signal input from an antenna, cable or satellite.

TV ANTENNA

eSPDIF OUT

Digital audio output to home theatres and other digital audio systems.

fSERV. U

For software update.

Side connector

1

2

3

4

5

30 EN

aCOMMON INTERFACE

Slot for a Conditional Access Module (CAM).

bAUDIO L/R

Audio input from analogue devices connected to VIDEO.

cVIDEO

Composite video input from analogue devices such as VCRs.

dUSB

Data input from USB storage devices.

Downloaded From TV-Manual.com Manuals

e HDMI (Only for TVs 26 inches and larger)

Digital audio and video input from high- de???nition digital devices such as Blu-ray players.

Connect a computer

Before you connect a computer to theTV

???Set the screen refresh rate on your computer to 60Hz.

???Select a supported screen resolution on your computer.

Connect a computer with one of the following connectors:

Note

???Connections via DVI or VGA require an additional audio cable.

???HDMI cable

???DVI-HDMI cable

???HDMI cable and HDMI-DVI adaptor

???VGA cable

EN 31

Downloaded From TV-Manual.com Manuals

Use a Conditional Access

Module

A Conditional Access Module (CAM) is provided by digitalTV service operators to decode digitalTV channels.

Note

???If required, refer to documentation from your operator on how to insert a smart card into the Conditional Access Module.

Insert and activate a CAM

Caution

???Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the CAM and your TV.

1Switch off the TV.

2Following the directions printed on the CAM, gently insert the CAM into the

COMMON INTERFACE at the side of the TV.

3Push the CAM in as far as it will go.

4Turn on the TV and wait for the CAM to be activated. This may take several minutes. Do not remove the CAM from the slot when in use ??? removing the CAM will deactivate digital services.

32 EN

Access CAM services

1After inserting and activating the CAM, press MENU.

2Press to select [Setup] >

[Features] > [Common interface].

??Applications provided by the digitalTV service operator appear on the screen.

Note

???This menu option is available only if the CAM is inserted and activated correctly.

Use Philips EasyLink

YourTV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices.

Note

???Compliant devices must be connected to your TV via HDMI.

Enable or disable EasyLink

Note

???Do not enable Philips EasyLink if you do not intend to use it.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Preferences] > [EasyLink].

3Select [On] or [Off].

Use one-touch play

1After enabling EasyLink, press play on your device.

??TheTV automatically switches to the correct source.

Downloaded From TV-Manual.com Manuals

Use one-touch standby

1Press and hold Standby on the TV???s or device???s remote control for at least three seconds.

??TheTV and all connected HDMI devices switch to standby.

Use a Kensington lock

There is a Kensington security slot at the back of theTV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.

English

EN 33

Downloaded From TV-Manual.com Manuals

8Product information

Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.

Supported display resolutions

Computer formats

???Resolution - refresh rate:

???640 x 480 - 60Hz

???800 x 600 - 60Hz

???1024 x 768 - 60Hz

???1280 x 1024 - 60 Hz

???1360 x 768 - 60Hz

???1440 x 900 - 60Hz (For Full HD only)

???1680 x 1050 - 50Hz, 60Hz (For Full HD only)

???Via HDMI/DVI input

Video formats

???Resolution - refresh rate:

???480i - 60Hz

???480p - 60Hz

???576i - 50Hz

???576p - 50Hz

???720p - 50Hz, 60Hz

???1080i - 50Hz, 60Hz

???1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz.

Multimedia

???Supported storage device: USB (Only FAT or FAT 32 USB storage devices are supported)

???Supported multimedia ???le formats:

???Images: JPEG

???Audio: MP3

Note

???Multimedia ???le names must not exceed 128 characters.

34 EN

Downloaded From TV-Manual.com Manuals

Tuner/Reception/

Transmission

???Aerial input: 75ohm coaxial (IEC75)

???DVB: DVB Terrestrial, DVB-T MPEG4 (only in some models)

???TV system: DVB COFDM 2K/8K; PAL I, B/G, D/K; SECAM B/G, D/K, L/L???

???Video playback: NTSC, SECAM, PAL

???Tuner Bands: Hyperband, S-channel, UHF,

VHF

Remote control

???Type: PF01E09B

???Batteries: 2 x AAA (LR03 type)

Power

???Mains power: 220-240V, 50Hz

???Standby power: < 0.3W

???Ambient temperature: 5 to 40 degrees Celsius

SupportedTV mounts

To mount theTV, purchase a PhilipsTV mount or aVESA-compatibleTV mount.To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of theTV.

Warning

???Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.

9 Troubleshooting

This section describes commonly encountered issues and accompanying solutions.

GeneralTV issues

TheTV does not switch on:

???Disconnect the power cable from the power outlet. Wait for one minute then reconnect it.

???Check that the power cable is securely connected.

The remote control is not working properly:

???Check that the remote control batteries are correctly inserted according to the +/- orientation.

???Replace the remote control batteries if they are ???at or weak.

???Clean the remote control and TV sensor lens.

The standby light on theTV blinks red:

???Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact

Philips Consumer Care.

You forgot the code to unlock theTV lock feature

???Enter ???8888???.

TheTV menu is in the wrong language.

???Change the TV menu to your preferred language.

When turning theTV on/off/to standby, you hear a creaking sound from theTV chassis:

???No action is required. The creaking sound is normal expansion and contraction of the TV as it cools down and warms up. This does not impact performance.

TV channel issues

???Check that the correct channel list is selected.

No digital channels were found during the installation:

???Check that the TV supports DVB-T or DVB-C in your country. See the listed countries on the back of the TV.

Picture issues

TheTV is on, but there is no picture:

???Check that the antenna is properly connected to the TV.

???Check that the correct device is selected

as the TV source.

There is sound but no picture:

???Check that the picture settings are

correctly set.

There is poorTV reception from an antenna connection:

???Check that the antenna is properly connected to the TV.

???Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can in???uence reception quality.

If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV.

???If reception on only one channel is poor, ???ne tune this channel.

There is poor picture quality from connected devices:

???Check that the devices are connected properly.

???Check that the picture settings are correctly set.

TheTV did not save your picture settings:

???Check that the TV location is set to the home setting. This mode offers you the ???exibility to change and save settings.

EN 35

Downloaded From TV-Manual.com Manuals

The picture does not ???t the screen; it is too big or too small:

???Try using a different picture format.

The picture position is incorrect:

???Picture signals from some devices may not ???t the screen correctly. Check the signal output of the device.

Sound issues

There is a picture but sound quality is poor:

Note

???If no audio signal is detected, the TV automatically switches the audio output off

??? this does not indicate malfunction.

???Check that all cables are properly connected.

???Check that the volume is not set to 0.

???Check that the sound is not muted.

There is a picture but the sound quality is poor:

???Check that the sound settings are

correctly set.

There is a picture but sound comes from one speaker only:

???Verify that sound balance is set to the centre.

HDMI connection issues

There are problems with HDMI devices:

???Note that HDCP support can delay the time taken for a TV to display content from a HDMI device.

???If the TV does not recognize the HDMI device and no picture is displayed, try switching the source from one device to another and back again.

???If there are intermittent sound disruptions, check that output settings from the HDMI device are correct.

36 EN

???If a HDMI-to-DVI adaptor or HDMI to DVI cable is used, check that an additional audio cable is connected to AUDIO L/R or AUDIO IN (mini-jack only).

Computer connection issues

The computer display on theTV is not stable:

???Check that a supported resolution and refresh rate is selected on the computer.

???Set the TV picture format to unscaled.

Contact us

If you cannot resolve your problem, refer to the FAQs for this product at www.philips. com/support.

If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum.

Warning

???Do not attempt to repair the product yourself. This may cause severe injury, irreparable damage to your product or void your warranty.

Note

???Make a note of your TV model and serial number before you contact Philips. These numbers are printed on the back of the TV and on the packaging.

Downloaded From TV-Manual.com Manuals

10 Index

B

C

D

display

resolution

E

EasyLink disable enable one-touch play

one-touch standby environmental care

F

factory settings favourite list

select set up

H

HDMI cable troubleshooting

I

install channels automatic manual

K

Kensington lock

L

location lock

Kensington

M

menu

main menu teletext

Multimedia

technical speci???cations

multimedia

listen to music view photos

34

English

32

32

32

33

5

23

14

14

36

24

25

33

22

33

10

13

34

20

20

EN 37

Downloaded From TV-Manual.com Manuals

O

P

R

S

T

V

Downloaded From TV-Manual.com Manuals

EN 39

Downloaded From TV-Manual.com Manuals

40 EN

Downloaded From TV-Manual.com Manuals

?? 2009 Koninklijke Philips Electronics N.V.

All rights reserved.

Downloaded From TV-Manual.com Manuals