DISCRETE SEMICONDUCTORS

DATA SHEET

book, halfpage

BGX885N

860 MHz, 17 dB gain push-pull amplifier

FEATURES

???Excellent linearity

???Extremely low noise

???Silicon nitride passivation

???Rugged construction

???Gold metallization ensures excellent reliability.

DESCRIPTION

The BGX885N is a hybrid amplifier module designed for CATV/MATV systems operating over a frequency range of 40 to 860 MHz at a voltage supply of 24 V (DC).

PINNING - SOT115D

Note

1. Pins 1 and 9 carry DC voltages.

handbook, halfpage

1 2 3 4 5 6 7 8 9

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134).

Notes

1.Decrease per octave of 1.5 dB.

2.fp = 349.25 MHz; Vp = Vo = 59 dBmV; fq = 403.25 MHz; Vq = Vo;

measured at fp + fq = 752.5 MHz.

3.Measured according to DIN45004B:

fp = 341.25 MHz; Vp = Vo;

fq = 348.25 MHz; Vq = Vo ???6 dB; fr = 350.25 MHz; Vr = Vo ???6 dB;

measured at fp + fq ??? fr = 339.25 MHz.

4.Measured according to DIN45004B:

fp = 851.25 MHz; Vp = Vo;

fq = 858.25 MHz; Vq = Vo ???6 dB; fr = 860.25 MHz; Vr = Vo ???6 dB;

measured at fp + fq ??? fr = 849.25 MHz.

5.The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.

Pins 1 and 9 carry DC voltages.

Fig.2 Test circuit.

List of components (see Fig.2)

1.Please consult the most recently issued data sheet before initiating or completing a design.

2.The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.

DEFINITIONS

Short-form specification ??? The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook.

Limiting values definition ??? Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information ??? Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

DISCLAIMERS

Life support applications ??? These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.

Right to make changes ??? Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

Philips Semiconductors ??? a worldwide company

Contact information

For sales of???ces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.

The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.