Contents

English

1 Notice

2010 ?? Koninklijke Philips Electronics N.V.All rights reserved.

Speci???cations are subject to change without notice.Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those speci???ed herein, con???rmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Warranty

???Risk of injury, damage to TV or void of warranty! Never attempt to repair the TV yourself.

???Use the TV and accessories only as intended by the manufacturer.

???The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips Customer Support for service or repairs.

???Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty.

2EN

Pixel characteristics

This LCD product has a high number of colour pixels.Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural property of the display (within common industry standards) and is not a malfunction.

Compliance with EMF

Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in

general have the ability to emit and receive electromagnetic signals.

One of Philips??? leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

Philips is committed to develop, produce and market products that cause no adverse health effects. Philips con???rms that if its products are handled properly for their intended use, they are safe to use according to scienti???c evidence available today.

Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

Mains fuse (UK only)

ThisTV is ???tted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A).

1Remove fuse cover and fuse.

2The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type.

3Re???t the fuse cover.

In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable.

Copyright

?? Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Note

??? Available in selected models only

HDMI, the HDMI logo and High-De???nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other registered and unregistered trademarks are the property of their respective owners.

English

EN 3

2 Important

Read and understand all instructions before you use yourTV. If damage is caused by failure to follow instructions, the warranty does not apply.

Safety

Risk of electric shock or ???re!

???Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.

???Never place the TV, remote control or batteries near naked ???ames or other heat sources, including direct sunlight.

To prevent the spread of ???re, keep candles or other ???ames away from the TV, remote control and batteries at all times.

???Never insert objects into the ventilation slots or other openings on the TV.

???When the TV is swivelled ensure that

no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing.

Risk of short circuit or ???re!

???Never expose the remote control or batteries to rain, water or excessive heat.

???Avoid force coming onto power plugs.

Loose power plugs can cause arcing or ???re.

Risk of injury or damage to the TV!

???Two people are required to lift and carry a TV that weighs more than 25 kg.

4EN

???When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a ???at, level surface that can support the combined weight of the TV and the stand.

???When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of

the TV and wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that result in accident, injury or damage.

Risk of injury to children!

Follow these precautions to prevent the TV from toppling over and causing injury to children:

???Never place the TV on a surface covered by a cloth or other material that can be pulled away.

???Ensure that no part of the TV hangs over the edge of the surface.

???Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to the wall or a suitable support.

???Educate children about the dangers of

climbing on furniture to reach the TV.

Risk of overheating!

???Never install the TV in a con???ned space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation.

Ensure curtains or other objects never cover the ventilation slots on the TV.

Risk of damage to the TV!

???Before you connect the TV to the power

outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.

Risk of injury, ???re or power cord damage!

???Never place the TV or any objects on the power cord.

???To disconnect the TV power cord easily from the power outlet, ensure that you have full access to the power cord at all times.

???When you disconnect the power cord, always pull the plug, never the cable.

???Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or

antenna cable.

Risk of hearing damage!

???Avoid using earphones or headphones at high volumes or for prolonged periods of

time.

Low temperatures

???If the TV is transported in temperatures below 5??C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.

Screen care

???Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.

???Unplug the TV before cleaning.

???Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.

???Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.

???To avoid deformations and colour fading, wipe off water drops as soon as possible.

Disposal of your old product and batteries

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste.

Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.

Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

English

ECO-Green

???High energy ef???ciency

???Low standby power

???Designed to facilitate recycling Philips continuously focuses on lowering the environmental impact of its innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-ef???cient use, end-of-life instructions and product recycling.

Thanks to our environmental effort, this TV has been awarded the European Ecolabel ???the ???ower??? www.ecolabel.eu

You can ???nd detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. This TV has features that contribute to energy-ef???cient use. This TV was awarded the European Ecolabel for its environmental qualities.

Energy ef???ciency features

???Ambient light sensor (Available in selected models only)

To save energy, the built-in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens.

???Energy saving

The energy saving setting of the TV combines several TV settings that result in saving energy. See the smart settings in the setup menu.

6EN

???Low standby power consumption

The class-leading and highly advanced power circuitry brings down the power

consumption of the TV to an extremely low level, without losing out on the constant standby functionality.

Power management (Available in selected models only)

The advanced power management of this TV ensures the most ef???cient use of its energy. You can check how your personal TV settings, the level of brightness in current onscreen pictures and the surrounding light conditions determine the relative power consumption.

End of use

To inform yourself on the correct disposal of the TV and batteries, refer to ???Disposal of your old product and batteries??? in the user manual (see ???Disposal of your old product and batteries??? on page 5).

3 YourTV

Congratulations on your purchase, and welcome to Philips!To fully bene???t from the support that Philips offers, register yourTV at www.philips.com/welcome.

This section gives you an overview of commonly usedTV controls and functions.

Side controls and indicators

1

2

3

4

5

a +/-: Increases or decreases volume.

b (Home): Toggles the home menu on or off.

cP/CH +/-: Switches to the next or previous channel.

d (Power): Switches the product on or off. The product is not powered off completely unless it is physically unplugged.

eStandby indicator and remote control sensor.

Remote control

22

21

20

19

18

17

16

15

2

3

4

5

6

7

8

9

10

11

12

13

14

EN 7

a (Standby-On)

???Switches the TV to standby if it is on.

???Switches on the TV if it is in standby.

b MENU

Toggles the main menu on or off.

cMHEG/TELETEXT

Toggles teletext on or off.

d SOURCE

Selects connected devices.

eColour buttons

Selects tasks or options.

fAD (Audio Descriptor) (For RF Digital TV only)

UK only: Enables audio commentary for the visually handicapped.

g OPTIONS

Accesses options relating to the current activity or selection.

hOK

Con???rms an entry or selection and displays the channel grid, when watching TV.

i (Navigation buttons)

Navigates menus.

j INFO

Displays program information, when available. If the information spans multiple pages, press OPTIONS to go to the next page.

k (Mute)

Mutes or restores volume.

lP +/- (Programme +/-)

Switches to the next or previous channel. When the TV menu is on, this functions as Page Up / Down.

m0-9 (Numeric buttons)

Selects a channel or setting.

n PICTURE (Smart picture)

Launches the picture menu.

8EN

o SOUND (Smart Sound)

Launches the sound menu.

p +/- (Volume +/-)

Increases or decreases volume.

qBACK P/P (Previous channel)

???Returns to a previous screen.

???Returns to the previously viewed channel.

r GUIDE

Switches between channel grid and programme list.

sSUBTITLE (For RF Digital TV only)

Enables or disables subtitles.

tDEMO (Used in selected models only)

Toggles the demonstration menu on or off.

u FORMAT

Selects a picture format.

v INCR. SURR

Enables Incredible Surround for stereo sources. Enables spatial mode for mono sources.

Remote control usage

When using the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects.

~5m

~30??

4 Use yourTV

This section helps you perform basicTV operations.

Switch yourTV on / off or to standby

To switch on

???If the standby indicator is off, press (Power) at the side of the TV.

???If the standby indicator is red, press

(Standby-On) on the remote control.

To switch to standby

???Press (Standby-On) on the remote

control.

?? The standby indicator switches to red.

To switch off

???Press (Power) at the side of the TV. ?? The standby indicator switches off.

Tip

???Though your TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet.

Note

???If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- on the side of the TV.

Switch channels

control to return to the previous channel.

Note

???When you use a favourite list, you can only select those channels in the list (see ???Select a favourite list??? on page 16).

Switch channels with the channel grid

The channel grid allows you to view all available channels in a grid format.

1Press OK.

?? The channel grid appears.

2 Press to select and preview a channel.

3Press OK to watch the selected channel.

EN 9

Use the source button

1Press SOURCE.

?? The source list appears.

2Press to select a device.

3Press OK to con???rm your choice.

??TheTV switches to the selected device.

AdjustTV volume

To increase or decrease volume

???Press +/-.

To mute or unmute sound

???Press to mute the sound.

???Press again to restore the sound.

10 EN

1Press MHEG/TELETEXT.

?? The main index page appears.

2Select a page as follows:

???Press the Numeric buttons to enter a page number

???Press P +/- to view the next or previous page

???Press the Colour buttons to select a colour coded item

???PressBACK to return to a previously viewed page

3Press MHEG/TELETEXT to exit teletext.

Note

???For UK users only: Some digital TV channels offer dedicated digital text services (for example, BBC1).

5Use more of yourTV

AccessTV menus

Menus help you to install channels, change picture and sound settings and access other features.

1Press MENU.

?? The menu screen appears.

Add new device

Setup

Watch TV

2Press to select and navigate through one of the following menus.

???[Watch TV]: Switches back to the aerial source if another source is selected.

???[Add new device]: Adds new devices to the home menu.

???[Setup]: Accesses menus to change picture, sound and other settings.

3Press OK to con???rm your choice.

4Press MENU to exit.

Tip

???After selecting [Add new device], follow the on-screen instructions to select the correct device and connector.

3Press OPTIONS.

?? The options menu appears.

4 Press to select [Rename device], then press OK.

?? A text input box appears.

5 Press to select characters.

6Press OK to con???rm each character.

7Select [Done], then press OK to ???nish renaming devices.

Note

???The device name can be up to 16 characters long.

???Press [Aa] to change an uppercase letter to a lowercase letter and vice versa.

Remove devices from the home menu

If a device is no longer connected to theTV, remove it from the home menu.

1 Press MENU.

2 Press to select a device to remove.

3 Press OPTIONS.

4 Press to select [Remove device], then press OK.

5Select [Remove], then press OK.

??The selected device is removed from the home menu.

EN 11

Change picture and sound settings

Change picture and sound settings to suit your preferences.You can apply pre-de???ned settings or change settings manually.

Note

???When watching TV or using external devices, press OPTIONS then select [Picture and sound] for quick access to picture and sound settings.

Use settings assistant

Use the settings assistant to guide you through the picture and sound settings.

1Press MENU.

2Press to select [Setup] > [Picture] > [Settings assistant].

3Press OK.

??The [Settings assistant] menu appears. Follow the on-screen instructions to choose your preferred picture settings.

Use smart picture

Use smart picture to apply pre-de???ned picture settings.

1Press PICTURE.

?? The [Smart picture] menu appears.

2Press to select one of the following settings.

???[Personal]: Applies the settings set in

[Settings assistant] menu.

???[Vivid]: Applies rich and dynamic settings.

???[Standard]: Adjusts picture settings to suit most environments and types of video.

???[Cinema]: Applies settings for movie viewing.

???[Game]: Applies settings for games.

12 EN

???[Energy saving]: Applies low-energy settings.

???[Natural]: Applies the best picture quality.

???[Custom]: Lists customised picture settings.

3Press OK to con???rm your choice.

??The selected smart picture setting is applied.

Manually adjust picture settings

1Press MENU.

2Press to select [Setup] >

[Picture].

3Press to select the following settings.

???[Smart picture]: Accesses pre-de???ned smart picture settings.

???[Video contrast]: Adjusts the intensity of video contents, keeping backlight unchanged.

???[Contrast]: Adjusts the intensity of backlight areas, keeping video contents unchanged.

???[Brightness]: Adjusts the intensity and details of dark areas.

???[Colour]: Adjusts colour saturation.

???[Hue]: Compensates for colour variations.

???[Sharpness]: Adjusts sharpness in the image.

???[Noise reduction]: Filters and reduces noise in an image.

???[Tint]: Adjusts the colour balance in an image.

???[Custom tint]: Customises tint setting. (Only available if [Tint] > [Custom] is selected)

???[Digital Crystal Clear]: Fine-tunes each pixel to match surrounding pixels. This produces a brilliant, high-de???nition image.

???[Dynamic contrast]: Enhances contrast. A [Medium] setting is recommended.

???[Dynamic backlight]: Adjusts brightness of the TV backlight to match lighting conditions.

???[MPEG artifact reduction]: Smoothes out transitions on digital pictures. You can switch this feature on or off.

???[Colour enhancement]: Makes colours more vivid and improves the details in bright colours. You can switch this feature on or off.

???[PC mode]: Adjusts the picture when a PC is connected to the TV via HDMI or DVI.

???[Picture format]: Changes the picture format.

???[Picture size]: Adjusts the viewing area. (when set to maximum, you might see noise or a rough edge of an image.)

???[Horizontal shift]: Adjusts the picture horizontally for PC-VGA, DVI, HDMI or YPbPr.

???[Vertical shift]: Adjusts the picture vertically for PC-VGA, DVI, HDMI or YPbPr.

Change picture format

1Press FORMAT.

?? A picture format bar appears.

2Press to select a picture format.

??The selected picture format is activated.

3Press OK to con???rm your choice.

Summary of picture formats

The following picture settings can be con???gured.

Note

???Depending on the format of the picture source, some picture settings are not available.

EN 13

Use smart sound

Use smart sound to apply pre-de???ned sound settings.

1Press SOUND.

?? The [Smart sound] menu appears.

2Press to select the following settings.

???[Custom]: Applies the settings that were customised in the sound menu.

???[Standard]: Adjusts sound settings to suit most environments and types of audio.

???[News]: Applies settings for spoken audio, such as news.

???[Movie]: Applies settings for movies.

3Press OK to con???rm your choice.

??The selected smart sound setting is applied.

Manually adjust sound settings

1Press MENU.

2Press to select [Setup] > [Sound]. ?? The [Sound] menu appears.

3Press to select the following settings.

???[Smart sound]: Accesses pre-de???ned smart sound settings.

???[Bass]: Adjusts the bass level.

???[Treble]: Adjusts the treble level.

???[Digital audio lipsync]: Enables or disables lipsync audio output. When this is enabled, the TV synchronises the audio and video performance. When disabled, you need to adjust the lipsync audio feature on the external device that is connected to the TV. (Only available with SPDIF connection)

???[Volume]: Adjusts the volume.

???[Vol.vis.impaired]: Sets the mix of visually impaired audio with regular audio. When available, visually impaired audio includes audio descriptions of on-screen action.

You can also enable this by pressing AD (Audio Descriptor). (Only applicable for the UK region.)

14 EN

???[Balance]: Adjusts the balance of the right and left speakers.

???[Audio language]: Available for digital channels, when multiple languages are broadcast. Lists available audio languages.

???[Dual I-II]: Selects audio languages if dual sound broadcast is available.

???[Mono/Stereo]: Selects mono or stereo if stereo broadcast is available.

???[TV speakers]: Turns TV speakers on or off. (Only available if EasyLink is switched on.)

???[Surround]: Enables spatial sound.

???[Headphone volume]: Adjusts headphone volume.

???[Auto volume levelling]: Automatically reduces sudden volume changes, for example, when switching channels.

???[Delta volume]: Levels out volume differences between channels or connected devices. Switch to the connected device before you change the delta volume.

???[SPDIF OUT]: Selects the type of digital audio output through SPDIF connector.

???[PCM]: Converts non-PCM audio type to PCM format.

???[Multichannel]: Outputs audio to the home theater.

Use the universal access menu

You can activate the universal access menu during the ???rst installation. Once enabled, you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices.

Tip

???You can also enable the universal access menu by selecting [Setup] > [Installation] > [Preferences] > [Universal access] > [On].

1 When watching TV, press OPTIONS. ?? TheTV options menu appears.

2Select [Universal access], then press OK or to enter.

3Press to select one of the following options and press OK to enter.

???[Hearing impaired]: Enables or disables hearing impaired subtitles.

???[Visually impaired]: Selects speaker, headphone or both for [Vol.vis. impaired] audio. Select [Off] to disable audio descriptor. (Only applicable to the UK region).

???[Vol.vis.impaired]: Adjusts the volume of visually impaired audio.

Tip

???Press the colour buttons on the remote control to enter the options.

Access the teletext features through the teletext options menu.

1Press MHEG/TELETEXT.

?? The teletext screen appears.

2Press OPTIONS.

?? The teletext options menu appears.

3 Press to select one of the following options.

???[Reveal]: Hides or reveals hidden information on a page, such as solutions to riddles or puzzles.

???[Cycle subpage]: Cycles through subpages automatically if subpages are available.

???[Language]: Switches to a different language group to display a language correctly when it uses a different character set.

???[Freeze page]: Freezes the current page.

???[Dual screen] / [Full Screen]: Enables and disables dual screen teletext.

4 Press to make a selection, then press OK to con???rm.

5Press BACK to exit the teletext options menu.

Select teletext subpages

A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number.

1Press MHEG/TELETEXT.

?? The teletext screen appears.

2Press P +/- to select a teletext page.

3 Press to enter a subpage.

EN 15

SelectT.O.P. teletext broadcasts

Table Of Pages (T.O.P.) teletext broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletext is not broadcast on all TV channels.

1Press MHEG/TELETEXT.

?? The teletext screen appears.

2Press INFO.

?? TheT.O.P. overview appears.

3Press to select a subject.

4Press OK to view the page.

UseTeletext 2.5

Teletext 2.5 offers more colours and better graphics than normal teletext. If Teletext 2.5 is broadcast by a channel, it is switched on by default.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Preferences] > [Teletext 2.5].

3Press to select [On] or [Off].

4Press OK to con???rm your choice.

16 EN

Create and use list of favourite channels

You can create a list of your preferredTV channels so that you can ???nd those channels easily.

Select a favourite list

1When watching TV, press OK to display the channel grid.

2Press OPTIONS.

?? The channel options menu appears.

3Press to select [Select list], then

press OK to enter.

?? The channel list options appear.

4Select [Favourite], then press OK.

??Only channels in the favourite list appear in the channel grid.

Note

???The favourite channel grid is empty until you add channels into the favourite lists.

View all channels

You can exit a favourite list, and view all installed channels.

1When watching TV, press OK. ?? The channel grid appears.

2Press OPTIONS.

?? The channel options menu appears.

3Press to select [Select list], then press OK or to enter.

4Select [All], then press OK.

??All channels are displayed in the channel grid.

Note

???All favourite channels are marked by an asterisk when you view the channel grid.

Add a channel to a favourite list

Tip

???View all channels before adding a channel to a favourite list.

1 When watching TV, press OK. ?? The channel grid appears.

2Press to select a channel to add to a favourite list.

3Press OPTIONS.

?? The channel options menu appears.

4Select [Mark as favourite], then press OK.

??The channel is added to the favourite list.

Note

???All favourite channels are marked by an asterisk in the channel grid.

Use the Electronic

Programme Guide

EPG is an on-screen guide available for digital channels. EPG allows you to:

???View a list of digital programmes being broadcast

???View upcoming programmes

???Group programmes by genre

???Set reminders when programmes start

???Set up preferred EPG channels

Switch on EPG

1When watching TV, press GUIDE.

??The EPG planner screen appears displaying information about the scheduled programmes.

Note

???EPG data is available only in selected countries and can take some time to load.

English

Remove a channel from a favourite list

1When watching TV, press OK. ?? The channel grid appears.

2Press to select a channel to remove.

3Press OPTIONS.

4Select [Unmark as fav.], then press OK. ?? The channel is removed.

Use EPG

1When watching TV, press GUIDE. ?? The EPG planner screen appears.

2Press MENU.

??The program guide menu appears.

3Press to select an option, and then press OK to con???rm.

4Press MENU to exit the EPG menu.

Note

???Only the channels in the [Preferred EPG channels] list appear in the EPG menu.

EN 17

Use the EPG options menu

Use the EPG options menu to set or clear reminders, change day and access other useful EPG options.

1Press GUIDE.

2Press OPTIONS.

?? The EPG menu appears.

3Press to select one of the following options.

???[Set remind] / [Clear remind]: Sets or clears programme reminders.

???[Change day]: Sets the EPG day.

???[Show info]: Displays programme information.

???[Search by genre]: Searches TV programmes by genre.

???[Scheduled reminders]: Lists programme reminders. Only available for upcoming programmes.

???[Preferred EPG channels]: Sets preferred EPG channels.

4Press OK to enter or activate the option.

5Press BACK to exit the EPG menu.

Tip

???Press GUIDE to switch between EPG and channel grid.

Use theTV clock

You can display a clock on theTV screen.The clock displays the current time using time data received from yourTV service operator.

Set theTV clock manually

In some countries, you need to set TV clock manually.

1Press MENU.

2Select [Setup] > [Features] > [Clock].

?? The [Clock] menu appears.

18 EN

3Press to enter time.

4Select [Done] to con???rm.

5Press MENU to exit.

Note

???If your selected country supports digital broadcast, the clock displays the time data from your TV service operator as priority.

Display theTV clock

1When watching TV, press OPTIONS. ?? TheTV option menu appears.

2Select [Clock].

3Press OK.

Note

???To disable the clock, repeat the above procedure.

Change the clock mode

1Press MENU.

2Press to select [Setup] >

[Installation] > [Clock] > [Auto clock mode].

3Press to select [Automatic] or

[Manual].

4Press OK to con???rm.

Change the time zone

1Press MENU.

2Press to select [Setup] >

[Installation] > [Clock] > [Time zone].

3Press to select your time zone.

4Press OK to con???rm.

Note

???This option is only available if you select [Auto clock mode] > [Manual] (in countries with clock transmission data).

Use daylight saving

1Press MENU.

2Press to select [Setup] >

[Installation] > [Clock] > [Daylight saving].

3Press OK or to enter [Daylight saving].

4Press to select [Standard time] or

[Daylight saving time].

5Press OK to con???rm.

Note

???This option is only available if you select

[Auto clock mode] > [Manual].

Use timers

You can set timers to switch theTV to standby at a speci???ed time.

Tip

??? Set the TV clock before you use timers.

4Press OK to switch on the sleep timer.

??TheTV switches to standby after the speci???ed time.

Automatically switch theTV on (on timer)

You can switch on the TV from standby to a speci???c channel at a speci???ed time.

1Press MENU.

2Press to select [Setup] >

[Features] > [On timer].

3Press to enter the [On timer] menu.

???[Activate]: Selects how often the TV is switched on.

???[Time]: Sets the time to switch on the TV.

???[Programme no.]: Selects the channel or the connected device.

4 Press MENU to exit.

English

UseTV locks

You can prevent your children from watching certain programmes or channels by locking the TV controls.

Set or change your PIN code

1Press MENU.

2Press to select [Setup] >

[Features] > [Set code] / [Change code].

??The [Set code] / [Change code] menu appears.

3Enter your code using the Numeric buttons.

??Follow the on-screen instructions to create or change your PIN code.

Tip

???If you forget your code, enter ???8888??? to override any existing codes.

Lock or unlock theTV

Lock the TV to prevent access to all channels and connected devices.

1Press MENU.

2Press to select [Setup] >

[Features] > [TV lock].

??You are prompted to enter your PIN code.

3Enter your code using Numeric buttons. ?? The [TV lock] menu appears.

4Press to select [Lock] or [Unlock].

5Press OK to con???rm.

??All channels and connected devices are locked or unlocked.

6Press MENU to exit.

Note

???Switch the TV off and on again for the change to take effect.

???If you select [Lock], you have to enter your code every time you turn on your TV.

20 EN

Lock or unlock one or more channels

1When watching TV, press OK to display the channel grid.

2Press to select a channel to lock or unlock.

3Press OPTIONS.

4Press to select [Lock channel] or

[Unlock channel].

5For each selection, press OK to lock or unlock the channel.

??The ???rst time you lock or unlock a channel, you are prompted to enter your PIN code.

6Enter your code and press OK.

??If the channel is locked, a lock icon is displayed.

7Repeat the process to lock or unlock more channels.

Note

???Switch the TV off and on again for the change to take effect.

???If you use P +/- on your remote control to switch between channels, the locked channels are skipped.

???If you access the locked channels from the channel grid, you are prompted to enter your PIN code.

Set parental ratings

Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings higher than your child???s age.

1Press MENU.

2Press to select [Setup] >

[Features] > [Parental rating].

?? A code setup screen appears.

3Enter your code using Numeric buttons. ?? The parental rating menu appears.

4Press to select an age rating.

5Press OK to con???rm.

6 Press MENU to exit.

Use subtitles

You can enable subtitles for eachTV channel. Subtitles are broadcast via teletext or DVB-T digital broadcasts.With digital broadcasts, you can select a subtitle language.

Enable subtitles on analogueTV channels

1Select an analogue TV channel.

2Press MHEG/TELETEXT.

3Enter the three-digit page number of the subtitle page with the Numeric buttons.

4Press MHEG/TELETEXT to switch off teletext.

5Press SUBTITLE.

?? The [Subtitle mode] menu appears.

6Select [On] to display subtitles always or [On during mute] to display subtitles only when audio is muted.

7Press OK to enable subtitles.

8Repeat this procedure to enable subtitles on each analogue channel.

Tip

???Select [Subtitle mode] > [Off] to disable subtitles.

Select a subtitle language on digitalTV channels

Note

???When you select a subtitle language on a digital TV channel as described below, the preferred subtitle language set in the installation menu is temporarily overruled.

1Press MENU.

2Press to select [Setup] >

[Features] > [Subtitle language].

3Press OK or to enter the list of available languages.

4Press to select a subtitle language.

5Press OK to con???rm.

Tip

???You can also access the [Subtitle language] menu while watching TV by pressing

OPTIONS > [Subtitle language].

English

View photos and play music from a USB storage device

Caution

???Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data from the device.

Use the USB connector to view photos or listen to music stored on a USB storage device.

1Turn on the TV.

2Connect the USB storage device to the

TV.

?? The home menu appears.

3Press to select [Browse USB].

4Press OK to con???rm.

?? The USB thumbnail browser appears.

Tip

???Press GUIDE to switch between thumbnail and ???le browsing views.

View photos

1In the USB browser, press to enter the

[Picture] folder.

2Press to select a photo or a photo album.

3Press OK to view a full screen image of the photo.

Tip

???When in full screen mode, press to move between photos.

22 EN

View a slide show of your photos

1When a full screen image of a photo is displayed, press OK.

??A slide show begins from the selected photo.

2Press the following buttons to control the slide show:

???OK to pause the slide show.

??? to go back or move forward to the next image.

??? BACK to stop the slide show.

Change slide show settings

1When viewing a slide show, press

OPTIONS.

?? The slide show options menu appears.

2Press to select one of the following.

???[Start Slideshow] / [Stop Slideshow]: Starts or stops a slide show.

???[Slideshow transitions]: Sets the transition from one picture to the next.

???[Slideshow frequency]: Sets the amount of time that a picture is shown.

???[Rotate image]: Rotates a picture.

???[Show info]: Displays the picture name, date, size and next picture in the slide show.

3Press OK to con???rm your setting.

Note

???[Rotate image] and [Show info] appear only when you press OK to pause the slideshow.

Listen to music

1In the USB thumbnail browser view, select [Music] and press to enter.

???Press GUIDE to switch between thumbnail and ???le browsing views.

2Press to select a music track or album.

3Press OK to play the selected music.

Music settings

When listening to music, press OPTIONS to access one of the following music settings.

???[Start playback] / [Stop playback]: Starts or stops the music.

???[Repeat] / [Play once]: Repeats a song. / Disables repeat play and plays a song or album once.

???[Shuf???e on] / [Shuf???e off]: Enables or disables random play of songs.

???[Show info]: Displays the ???le name.

???[TV speakers]: Sets the TV speakers on or off. (Only available if EasyLink is switched on.)

???[Sound]: Adjusts the sound setting.

View a slideshow with music

You can view a picture slide show with background music.

1Select an album of songs.

2Press OK.

3Press BACK to return to the USB content browser.

4Select an album of pictures.

5Press OK.

Disconnect a USB storage device

1Press BACK to exit the USB browser.

2Wait for ???ve seconds then disconnect the USB storage device.

Listen to digital radio channels

If digital broadcasting is available, digital radio channels are installed automatically during installation.

1When watching TV, press OK to display the channel grid.

2 Press OPTIONS.

3 Press to select [Select list] > [Radio].

?? The radio channel grid appears.

4 Press to select a radio channel and press OK to listen.

Note

???Select [Select list] > [All] to exit radio channels and view all channels.

EN 23

Update theTV software

Philips continuously tries to improve its products and we recommend that you update theTV software when updates are available. Check www.philips.com/support for availability.

Check the current software version

1Press MENU.

2Press to select [Setup] >

[Software update] > [Current software info].

??TheTV displays the current software information.

Download the software

1On your PC, open a web browser and go to www.philips.com/support.

2Download the latest software upgrade ???le to your PC.

3Decompress the ZIP-???le.

4Copy the autorun.upg ???le to the root directory of the USB device.

Update software

You can update the TV software via a USB storage device or OAD (Over the Air software Download).

Update using a USB device

Connect your USB storage device to the TV.

1If the software update screen does not appear automatically, select [Setup] >

[Software update] > [Local updates] > [USB].

2Press OK to update the TV software manually.

3Follow the on-screen instructions to complete the update.

Note

???The TV restarts after the software update is complete.

24 EN

Update using OAD

1If using (DVB-T) digital broadcast, your TV automatically receives software updates. If you receive a message on your screen asking you to update your software:

???Select [Update now] to update the software immediately.

???Select [Remind me later] to exit the update screen at that time and be reminded later.

???Select [Cancel] to skip the update.

2If you select [Cancel], you can manually access the OAD update by selecting

[Setup] > [Software update] > [Local updates] > [OAD].

3Select the available version of OAD and press OK.

4Follow the on-screen instructions to start the update.

Note

???The TV restarts after the software update is complete.

ChangeTV preferences

Use the preferences menu to customise your TV settings.

1Press MENU.

2Select [Setup] > [Installation] > [Preferences].

???[Location]: Optimises TV settings for your location - home or shop.

???[Volume bar]: Displays the volume bar when you adjust the volume.

???[Channel info.]: Displays information about the TV channel every time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information.

???[Universal access]: Enables or disables the universal access menu.

???[EasyLink]: Enables one-touch play and one-touch standby between EasyLink-compliant devices.

???[Pixel Plus Link]: Overrides the settings of connected devices and uses the settings of the TV. (Only available if EasyLink is switched on.)

???[Teletext 2.5]: Enables or disables Teletext 2.5. (For digital TV)

???[E-sticker]: For shop mode only. Sets the location of the e-sticker.

3Press to select your preference.

4Press OK.

5Press MENU to exit.

Access decoder channel

You can map channels provided through a decoder or descrambler to yourTV channel selection. In this way, you can select these channels by using the RC of yourTV.The decoder or a descrambler must be connected to EXT1 (SCART).

Set decoder channel

Map channels from a decoder or descrambler.

1Press MENU.

2Select [Setup] > [Installation] > [Decoder].

3Press to enter [Decoder] menu.

4Press to select [Channel], then press

to enter.

5Select one channel to map to the decoder / descrambler channel and press OK to con???rm.

6Select [Status], then press to enter.

7Select [EXT 1] (SCART) the connector used by the decoder / descrambler.

8Press OK.

???Select [None] if you do not want to map to the decoder / descrambler channel.

Start aTV demo

You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list.

1Press DEMO on the remote control.

2 Press to select a demo and press OK to view it.

3Press DEMO to exit.

Reset theTV to factory settings

You can restore the default picture and sound settings of yourTV.The channel installation settings remain the same.

1 Press MENU.

2Select [Setup] > [Installation] > [Factory settings].

3 Press to enter [Factory settings].

4Select [Reset] to start resetting.

5Press OK.

6Press MENU to exit.

EN 25

6 Install channels

The ???rst time you set up yourTV, you are prompted to select a menu language and to installTV and digital radio channels (if available). This chapter provides instructions on how to re-install and ???ne tune channels.

Automatically install channels

This section describes how to search and store channels automatically.

Step 1 Select your menu language

1Press MENU.

2Press to select [Setup] >

[Installation] > [Language] > [Menu language].

3Press OK or to enter [Menu language].

4Press to select a language.

5Press OK to con???rm.

6Press to return to [Installation] menu.

Step 2 Select your country

Select the country where you are installing the TV. The available channels for the country are installed on the TV.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel installation] > [Automatic channel search].

3Press OK or to enter the menu. ?? The country menu appears.

4Press to select your country.

5Press OK to con???rm your choice.

??The channel installation guide appears on the screen.

26 EN

Step 3 Install channels

Automatically installs the available analogue and digital TV channels and digital radio channels.

1From the channel installation guide screen, select [Full installation].

2Press OK to con???rm.

??TheTV starts to search and store all the available channels.

3When installation is complete, press OK to exit the installation menu.

Update the channel list

You can enable automatic update of channels when your TV is in standby mode. The channels stored in your TV are updated every morning according to the channel information in the broadcast.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel installation] > [Standby update].

3Select [On] to enable the automatic update or select [Off] to disable it.

Manually install channels

This section describes how to search and store analogueTV channels manually.

Step 1 Select your system

Note

???Skip this step if your system settings are correct.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel installation] > [Analogue: manual install].

??The [Analogue: manual install] menu appears.

3Press to select [System], then press to enter.

4Press to select your country or region.

5Press OK to con???rm.

6Press to return to [Channel installation] menu.

Step 2 Search and store newTV channels

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel installation] > [Analogue: manual install].

??The [Analogue: manual install] menu appears.

3Press to select [Search], then press to enter.

4Press to manually enter the three- digit frequency.

5Press OK to begin search.

??If a channel is unavailable at the selected frequency, press OK to search for the next available channel.

channel] to store the new channel under a new channel number.

8Press OK to enter [Store as new channel], then press OK.

9 Press to return to the [Channel installation] menu.

Step 3 Fine-tune analogue channels

1 Press MENU.

2 Press to select [Setup] >

[Installation] > [Channel installation] > [Analogue: manual install].

??The [Analogue: manual install] menu appears.

3 Press to select [Fine-tune], then press to enter.

4 Press to adjust frequency.

5Press OK to con???rm.

6 Press to select [Store current channel] to store the channel number.

7 Press to enter [Store current channel], then press OK.

8 Press to return to the [Channel installation] menu.

EN 27

Rename channels

You can rename channels.The name appears when you select the channel.

1When watching TV, press OK to display the channel grid.

2Select the channel to rename.

3PressOPTIONS.

?? The channel options menu appears.

4Press to select [Rename channel], then press OK.

?? A text input box appears.

5Press to select characters.

6Press OK to con???rm each character.

7Select [Done], then press OK to ???nish renaming channels.

Tip

???Press [Aa] to change an uppercase letter to a lowercase letter and vice versa.

Rearrange channels

After you install channels, you can rearrange the order in which they appear.

1When watching TV, press OK to display the channel grid.

2Press OPTIONS.

?? The channel options menu appears.

3Press to select [Reorder], then press

OK.

4Select the channel to rearrange, then

press OK.

?? The selected channel is highlighted.

5Press to move the highlighted channel to the desired location, then press OK.

6Press OPTIONS.

??[Done reordering] appears on the screen.

7Press OK to con???rm.

8Press BACK to exit the channel grid.

28 EN

Test digital reception

You can check the quality and signal strength of digital channels.This allows you to reposition and test your antenna or satellite dish.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Channel installation] > [Manual channel search].

3Press to enter the menu.

4Press to enter the frequency of the channel you want to test.

5Press OK to con???rm the frequency, then press OK again to con???rm [Search].

6When complete, select [Store] to store the frequency.

Note

???If the signal quality and strength is poor, reposition the aerial or satellite dish and retest.

???If you still have problems with the reception of your digital broadcast, contact a specialised installer.

7 Connect devices

This section describes how to connect devices with different connectors. Examples are provided in the Quick Start.

Note

???You can use different types of connectors to connect a device to your TV.

aTV ANTENNA

Signal input from an antenna, cable or satellite.

TV ANTENNA

English

dSERV. U

For use by service personnel only.

ePC IN (VGA and AUDIO IN)

Audio and video input from a computer.

fHDMI 1

Digital audio and video input from high- de???nition digital devices such as Blu-ray players.

gEXT 3 (Y Pb Pr and AUDIO L/R)

Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.

Side connector

cUSB

Data input from USB storage devices.

connected to VIDEO.

de???nition digital devices such as Blu-ray players.

fCOMMON INTERFACE

Slot for a Conditional Access Module (CAM).

Connect a computer

Before you connect a computer to theTV

???Set the screen refresh rate on your computer to 60Hz.

???Select a supported screen resolution on

your computer.

Connect a computer with one of the following connectors:

Note

???Connections via DVI or VGA require an additional audio cable.

???HDMI cable

???DVI-HDMI cable

???HDMI cable and HDMI-DVI adaptor

???VGA cable

Use a Conditional Access

Module

A Conditional Access Module (CAM) is provided by digitalTV service operators to decode digitalTV channels.

Note

???Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module.

Insert and activate a CAM

Caution

???Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the CAM and your TV.

1 Switch off the TV and disconnect it from the power outlet.

2Following the directions printed on the CAM, gently insert the CAM into the

COMMON INTERFACE at the side of the TV.

3Push the CAM in as far as it will go.

4Reconnect the TV to the power outlet.

5Turn on the TV and wait for the CAM to be activated. This may take several minutes. Do not remove the CAM from the slot when in use ??? removing the CAM will deactivate digital services.

Access CAM services

??Applications provided by the digitalTV service operator appear on the screen.

Note

???This menu option is available only if the CAM is inserted and activated correctly.

EN 33

Use Philips EasyLink

Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.

Note

???The EasyLink-compliant device must be switched on and selected as the source.

???Philips does not guarantee 100% interoperability with all HDMI CEC devices.

EasyLink features

One-touch play

When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control.

One-touch standby

When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode.

System audio control

When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device.

To use one-touch audio, you must map the audio input from the connected device to your TV.

You can use the remote control from the connected device to adjust the volume.

34 EN

Enable or disable EasyLink

Note

???Do not enable Philips EasyLink if you do not intend to use it.

1Press MENU.

2Press to select [Setup] >

[Installation] > [Preferences] > [EasyLink].

3Select [On] or [Off].

Use one-touch play

1After enabling EasyLink, press play on your device.

??TheTV automatically switches to the correct source.

Use one-touch standby

1Press (Standby-On) on the TV???s or device???s remote control.

??TheTV and all connected HDMI devices switch to standby.

SetTV speakers to EasyLink mode

When you play content from an EasyLink compliant home theater, the TV speakers are automatically muted.

1Enable one-touch play and one-touch standby between your Easylink compliant devices by following the instructions

in the previous section (see ???Enable or disable EasyLink??? on page 34).

2Press MENU.

3Press to select [Setup] > [Sound]

> [TV speakers] > [Auto EasyLink].

?? TheTV speakers are turned off automatically when content from an Easylink compliant system is detected.

4Press to select [Setup] > [Sound]

> [TV speakers] > [On] to disable system audio control and enable the TV speakers.

Note

???To mute the TV speakers, select [TV speakers] > [Off].

Use a Kensington lock

There is a Kensington security slot at the back of theTV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.

English

EN 35

8Product information

Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.

Supported display resolutions

Computer formats

???Resolution - refresh rate:

???640 x 480 - 60Hz

???800 x 600 - 60Hz

???1024 x 768 - 60Hz

???1280 x 720 -60Hz

???1280 x 768 -60Hz

???1280 x 1024 - 60 Hz

???1360 x 768 - 60Hz

???1440 x 900 - 60Hz (For Full HD only)

???1680 x 1050 - 60Hz (For Full HD only)

Video formats

???Resolution - refresh rate:

???480i - 60Hz

???480p - 60Hz

???576i - 50Hz

???576p - 50Hz

???720p - 50Hz, 60Hz

???1080i - 50Hz, 60Hz

???1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz.

Multimedia

???Supported storage device: USB (Only FAT or FAT 32 USB storage devices are supported)

???Supported multimedia ???le formats:

???Images: JPEG

???Audio: MP3

Note

???Multimedia ???le names must not exceed 128 characters.

Tuner / Reception /

Transmission

???Aerial input: 75 ohm coaxial (IEC75)

???DVB: DVB Terrestrial, DVB-T MPEG4

???TV system: DVB COFDM 2K/8K; PAL I, B/G, D/K; SECAM B/G, D/K, L/L???

???Video playback: NTSC, SECAM, PAL

???Tuner Bands: Hyperband, S-channel, UHF,

VHF

Remote control

???Type: PF01E09B

???Batteries: 2 x AAA (LR03 type)

Power

???Mains power: 220-240V, 50Hz

???Standby power: < 0.3 W

???Ambient temperature: 5 to 40 degrees Celsius

SupportedTV mounts

To mount theTV, purchase a PhilipsTV mount or aVESA-compatibleTV mount.To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of theTV.

Warning

???Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage.

Product speci???cation

Design and speci???cations are subject to change without notice.

32PFL3605H

???Without TV stand

???Dimension (WxHxD): 795.6 x 508.3 x 93 (mm)

???Weight: 8.3 kg

???With TV stand

???Dimension (WxHxD): 795.6 x 556.6 x 220.8 (mm)

???Weight: 9.4 kg

42PFL3605H

???Without TV stand

???Dimension (WxHxD): 1018.5 x 635.7 x 83 (mm)

???Weight: 11.5 kg

???With TV stand

???Dimension (WxHxD): 1018.5 x 683 x 235.8 (mm)

???Weight: 12.8 kg

47PFL3605H

???Without TV stand

???Dimension (WxHxD): 1129.8 x 700.7 x 83 (mm)

???Weight: 16.8 kg

???With TV stand

???Dimension (WxHxD): 1129.8 x 746.4 x 270.1 (mm)

???Weight: 19.8 kg

English

9 Troubleshooting

This section describes commonly encountered issues and accompanying solutions.

GeneralTV issues

TheTV does not switch on:

???Disconnect the power cable from the power outlet. Wait for one minute then reconnect it.

???Check that the power cable is securely connected.

The remote control is not working properly:

???Check that the remote control batteries are correctly inserted according to the +/- orientation.

???Replace the remote control batteries if they are ???at or weak.

???Clean the remote control and TV sensor lens.

The standby light on theTV blinks red:

???Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact

Philips Consumer Care.

You forgot the code to unlock theTV lock feature

???Enter ???8888???.

TheTV menu is in the wrong language.

???Change the TV menu to your preferred language.

When turning theTV on / off / to standby, you hear a creaking sound from theTV chassis:

???No action is required. The creaking sound is normal expansion and contraction of the TV as it cools down and warms up. This does not impact performance.

38 EN

Cannot remove ???e-sticker??? banner displayed on theTV.

???To remove the logos and images, set the location of your TV to home.

1.Press MENU.

2.Select [Setup] > [Installation] > [Preferences] > [Location].

3.Select [Home] and press OK.

TV channel issues

Previously installed channels do not appear in the channel list:

???Check that the correct channel list is

selected.

No digital channels were found during the installation:

???Check that the TV supports DVB-T, DVB-T Lite or DVB-C in your country.

Some channels are not automatically installed on myTV:

???During installation, make sure that you select the country where you are installing the TV (see ???Step 2 Select your country??? on page 26).

Picture issues

TheTV is on, but there is no picture:

???Check that the antenna is properly connected to the TV.

???Check that the correct device is selected as the TV source.

There is sound but no picture:

???Check that the picture settings are correctly set.

There is poorTV reception from an antenna connection:

???Check that the antenna is properly connected to the TV.

???Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can in???uence reception quality.

If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV.

???If reception on only one channel is poor, ???ne tune this channel.

There is poor picture quality from connected devices:

???Check that the devices are connected properly.

???Check that the picture settings are correctly set.

TheTV did not save your picture settings:

???Check that the TV location is set to the home setting. This mode offers you the ???exibility to change and save settings.

The picture does not ???t the screen; it is too big or too small:

???Try using a different picture format.

The picture position is incorrect:

???Picture signals from some devices may not ???t the screen correctly. Check the signal output of the device.

HDMI connection issues

There are problems with HDMI devices:

???Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device.

???If the TV does not recognise the HDMI device and no picture is displayed, try switching the source from one device to another and back again.

???If there are intermittent sound disruptions, check that output settings from the HDMI device are correct.

???If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable, check that an additional audio cable is connected to AUDIO IN (mini-jack only).

English

Sound issues

There is a picture but sound quality is poor:

Note

???If no audio signal is detected, the TV automatically switches the audio output off

??? this does not indicate malfunction.

???Check that all cables are properly connected.

???Check that the volume is not set to 0.

???Check that the sound is not muted.

There is a picture but the sound quality is poor:

???Check that the sound settings are correctly set.

There is a picture but sound comes from one speaker only:

???Verify that sound balance is set to the centre.

Computer connection issues

The computer display on theTV is not stable:

???Check that your PC uses the supported resolution and refresh rate.

???Set the TV picture format to unscaled.

Contact us

If you cannot resolve your problem, refer to the FAQs for this product at www.philips.com/support.

If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum.

Warning

???Do not attempt to repair the product yourself. This may cause severe injury, irreparable damage to your product or void your warranty.

Note

???Make a note of your TV model and serial number before you contact Philips. These numbers are printed on the back of the TV and on the packaging.

EN 39

10 Index

A

B

C

40 EN

D

E

F

G

H

I

K

L

language menu subtitle troubleshoot

list

favourites list location

country home or shop

lock

Kensington lock lock channels

lock connected devices PIN code

ratings lock

M

menu language main menu teletext

universal access

MHEG teletext

MPEG artifact reduction multimedia

music

digital radio

USB

with slideshow mute TV speakers

O

OAD on timer

one-touch play one-touch standby

26

21

38

16

26

24

35

20

20

20

20

26

11

15

15

10

12

36

23

23

23

34

24 19, 19 34 34

English

P

R

S

T

U

V

W

English

EN 43