Register your product and get support at
www.philips.com/welcome
PHILIPS CONSUMER ELECTRONICS COMPANY
Marietta, GA
Meet Philips at the Internet
http://www.philips.com
W
CLASS 1
LASER PRODUCT
AZ3068
Register your product and get support at
www.philips.com/welcome
PHILIPS CONSUMER ELECTRONICS COMPANY
Marietta, GA
Meet Philips at the Internet
http://www.philips.com
W
CLASS 1
LASER PRODUCT
AZ3068
Return your Product Registration Card or register online at
www.philips.com/welcome today to get the very most from your purchase.
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure:
IMPORTANT SAFETY INSTRUCTIONS
*Proof of Purchase
Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warrranty service.
*Product Safety
Notification
By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.
*Additional Benefits
Registering your product guar- antees that you'll receive all of the privileges to which you're entitled, including special
Clean only with dry cloth.
Congratulations on your purchase, and welcome to the ???family!???
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS. You???ve selected one of the
As a member of the PHILIPS ???family,??? you???re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.What???s more, your purchase guarantees you???ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.
Most importantly, you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing in a PHILIPS prod- uct.
P.S. To get the most from your PHILIPS purchase, be sure to complete and return your Product Registration Card at once, or register online at:
www.philips.com/welcome
Know these safetysymbols
C A UTI ON
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This ???bolt of lightning??? indicates unin- sulated material within your unit may
cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The ???exclamation point??? calls attention to features for which you should read
the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour ??viter les choc ??lec- triques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu???au fond.
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.
Model No. __________________________
Serial No. __________________________
Where the MAINS plug or an appliance coupler is used as the disconnet device, the disconnet device shall remain readily operable.
9 
materials
Class II equipment symbol
Visit our World Wide Web Site at http://www.philips.com/welcome
This symbol indicates that the unit has
a double insulation system
0
C B A A
X
A
6 x 
Remove the insulation plastic tab.
Retirez la feuille de protection en plastique.
English
Congratulations on your purchase and wel- come to Philips!
To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
SUPPLIED ACCESSORIES
???AC mains lead
???Remote control
TOP AND FRONT PANELS (See 1)
1p ??? 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted when
headphones are connected to the set.
2AUX ??? 3.5 mm
3 STANDBYy ??? power on/ off switch
4Source selector ??? selects CD/ TUNER/ AUX/ TAPE function
5 IR Sensor ??? infrared sensor for remote control
6Cassette recorder keys
RECORD 0 ??? starts recording PLAY 1 ??? starts playback
SEARCH 5/6 ??? fast winds/rewinds tape
STOP???OPEN 9/
???opens the cassette compartment
???stops the tape
PAUSE ; ??? pauses playback or recording 7 OPEN???CLOSE - press to open/close CD door
8DBB ??? switches the bass enhancement on (DBB1 or DBB2) / off
9 VOLUME ??? adjusts volume level
0FM???MW???DISPLAY
TUNER: selects wavebands
MP3/WMA: display
!Navigation controls
PRESET (ALB/ PRE)
MP3/WMA only : selects previous / next album.
TUNER : selects a preset station. 9 ??? stops CD playback;
???erases a CD programme
SEARCH ???, ?? ???
CD/MP3/WMA: ??? searches backwards and for- wards within a track;
??? skips to the beginning of a current/ previous/ later track
TUNER: tunes to radio stations (down, up). MODE ??? selects different play modes: e.g. REPEAT or SHUFFLE (random order)
2; ??? starts or pauses disc playback
CONTROL
@PROGRAM
CD/MP3/WMA: programs tracks and reviews the program;
Tuner: programs preset radio stations
# Display ??? shows the status of the set
BACK PANEL
$ Telescopic aerial ??? improves FM reception % AC MAINS ??? inlet for mains lead
^Battery compartment ??? for 6 batteries, type
REMOTE CONTROL (See 1)
1 TUNER ??? selects tuner source
2 CD ??? selects CD sound source
3 TUNING
4???, ?? ??? skips to the beginning of a current/ previous/ subsequent disc track
5 REPEAT ??? select repeat modes
6 SHUFFLE ??? selects shuffle modes
7ALBUM/PRESET 3,4 ???
MP3/WMA only : select next/ previous album.
TUNER : select a preset station.
8DBB ??? switches the bass enhancement on (DBB1or DBB2)/ off
99 ??? stops disc playback;
???erases a disc program
0 2; ??? starts/ pauses disc playback
!PROGRAM
CD/MP3/WMA: programs tracks and reviews the program;
Tuner: programs preset radio stations
@SEARCH 5, 6 ??? searches backwards/ forwards within a disc track
#BAND / DISPLAY
???selects wavebands
???display
$ VOLUME +, - (up, down) ??? adjusts volume level % MUTE ??? interrupts/ resumes sound
CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
POWER SUPPLY
BASIC FUNCTIONS
POWER SUPPLY
Whenever convenient, use the mains supply to conserve battery life. Make sure you remove the power plug from the set and wall socket before insert- ing batteries.
Batteries (not included)
???Insert 6 batteries, type
(See A)
Remote control
Important!
???Before using the remote control, remove the insulation plastic tab as shown in fig. A.
???If the remote control does not function cor- rectly or the operating range is reduced, replace the battery with a new (CR2025) type battery
1Pull the battery tray out.
2Replace a new battery
3Fully insert the battery tray back to the original position.
Incorrect use of batteries can cause electrolyte leak- age and will corrode the compartment or cause the batteries to burst.
???Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set.
???When inserting new batteries, do not try to mix old batteries with the new ones.
???Batteries contain chemical substances, so they should be disposed of properly.
???Perchlorate
Using AC Mains
1Check if the mains supply, as shown on the type plate located on the bottom of the set, corre- sponds to your local mains supply. If it does not, consult your dealer or service centre.
2Connect the mains lead to the wall socket.
3To disconnect the mains supply, unplug the set from the wall socket.
4Install the unit near the AC outlet and where the AC power plug can be easily reached.
When a CD has reached the end of playback and remains in the stop position for more than 15 minutes, the set will switch off automatically to save mains. When in pause position for 5 minutes, the CD playback will stop automatically. 15 minutes later, the set switches off.
BASIC FUNCTIONS
Switching on and off and selecting function
1Press STANDBY y (on the set only) to switch on.
2Press Source selector once or more to select: CD, TUNER, AUX or TAPE function.
3Press y to switch off the set.
Helpful hints:
???To change from TAPE to CD, TUNER or AUX function, or when you are switching off the set: first, make sure you press the tape STOP 9 key to end playback and all the cassette keys are released.
???The tone, sound settings, tuner presets and the volume level (up to a maximum volume level of 20) will be retained in the set???s memory.
ADJUSTING VOLUME AND SOUND
???Adjust the volume with the VOLUME control.
=Display shows the volume level 
and a number from
Bass adjustment
There are three DBB (Dynamic Bass Boost) options:
???Off: no bass enhancement
???DBB1: moderate bass enhancement
???DBB2: strong bass enhancement
???Press DBB once or more to select your option. ???DBB1,2 appears if DBB is activated.
How to MUTE the sound
1.Press MUTE on the remote control to interrupt sound reproduction instantly.
=Playback continues without sound and in the
2.To reactivate sound reproduction you can:
???press MUTE again;
???adjust the volume controls;
???change to another source.
DIGITAL TUNER
Tuning to radio stations
1Press y to on, then press Source selector
to select TUNER (or press TUNER on the remote control) .
2Press FM???MW once or more to select your waveband. (or press BAND on the remote control)
3Press and hold SEARCH ??? or ??
(or TUNING
???The radio automatically tunes to a station of suf- ficient reception. Display shows 
dur- ing automatic tuning.
4Repeat steps
???To tune to a weak station, press ??? or ?? briefly and repeatedly until you have found optimal recep- tion.
To improve radio reception:
???For FM, extend, incline and turn the telescopic aeri- al. Reduce its length if the signal is too strong.
???For MW, the set uses a
Programming radio stations
You can store up to a total of 30 radio stations in the memory, manually or automatically (Autostore).
Manual programming
1Tune to your desired station (see Tuning to radio stations).
2Press PROGRAM to activate programming.
???Display: program flashes.
3Press PRESET (ALB/ PRE)
4Press PROGRAM to confirm.
???Display shows the preset number, waveband and the frequency of the preset station.
5Repeat steps
Helpful hints: You can erase a preset station by storing another frequency in its place.
Autostore
Autostore automatically starts programming radio sta- tions from preset 1. Any previous presets e.g. manual- ly programmed will be erased.
???Press and hold PROGRAM until 
appears.
??? Available stations are programmed.
???After all stations are stored, the first autostore preset station will then automatically play.
To listen to a preset or autostore station
Press the PRESET (ALB/ PRE)
About MP3
The music compression technology MP3 (MPEG1 Audio Layer 3) significantly reduce the digital data of an audio CD while maintaining CD quality sound.
Helpful Hints:
-When playing a disc with CD Audio tracks and MP3/WMA files, the CD Audio tracks will be played first.
-???0??? is shown as your album number, if you have not organized your MP3/WMA files into any albums on your disc.
Finding a passage within a track
1.During playback, press and hold SEARCH ??? or ?? (5, or 6 on the remote control )
=The disc is played at high speed and low vol- ume.
2.When you recognize the passage you want, release ??? or ??.
=Normal playback continues.
Programming track numbers
Clearing a program
You can erase the contents of the memory by:
???Press 9 :
???Once, if in the stop position;
???Twice, during playback.
???Press STANDBY ON y;
???Select another sound source;
???open the CD door
= 
displayed briefly, and program disappears.
Helpful Hints:
???Make sure that the file names of the MP3/WMA files end with .mp3 or wma.
???Total number of music files and albums: around 350 (with a typical file name length of 20 characters).
???The length of file names affects the number of tracks for playback. With shorter file names, more files can be burned on a disc.
Playing a disc
This player plays Audio Discs including
???
???
1.Press STANDBY ON y once or more to on, then select CD source (or press CD on the remote control).
2.Press OPEN???CLOSE to open the disc door. ???Display show 
when the disc door is
open.
3.Insert a disc with the printed side facing up and press down on OPEN???CLOSE to close the CD door.
???
,is displayed as the player scans the contents of a disc.
???
=Audio CD: the total number of tracks and the total playing time are displayed.
4. Press 2; to start playback.
6.To stop playback, press 9.
Helpful Hints:
CD play will also stop when:
???the disc door is opened
???the disc has reached the end
???you select other sound sources.
Display information
The ID3 tag is part of an MP3/WMA file and contains various track information such as the track??s title or the artist??s name.
??? During playback, press FM???MW???DISPLAY on the set
repeatedly to view ID3 tag information or select your display function.
???Display shows: 
if ID3 tag information is not available.
Helpful Hints:
- Complete the ID3 tag information with your MP3/WMA encoder software before burning the
Selecting a different track
???Press SEARCH ??? or ?? ( ??? or ?? on the remote control ) once or repeatedly until the desired track number appears in the display.
First press ALBUM/ PRESET ??? or + once or more to find your album.
???In the pause/stop position, press 2; to start playback.
Helpful Hints:
???In shuffle modes, press ??? to go to the beginning of the current track.
In the stop position, select and store your CD tracks in the desired sequence. Up to 20 tracks can be stored in the memory.
1. In the stop position, press ??? or ?? once or repeatedly to select your desired track number.
???First press ALBUM/ PRESET ??? or + once or more to find your album.
2.Press PROGRAM.
???
and the number of tracks stored appear briefly. (See 5)
???Display shows: PROG and the selected track number. (See 6)
3.Repeat steps
4.To start playback of your disc program, press 2;.
Helpful Hints:
???During normal playback, you can press PROGRAM to add a current track to your program list.
Reviewing the program
???In the stop position, press and hold down PROGRAM for a while until the display shows all your stored track numbers in sequence.
Helpful Hints:
programmed.
Different play modes: SHUFFLE and REPEAT
(See 7 - 8)
You can select and change the various play modes before or during playback. The play modes can be combined with PROGRAM.
shuffle - tracks of the entire CD/ program are played in random order
shuffle repeat all - to repeat the entire CD/ program continuously in random order
repeat all - repeats the entire CD/ program repeat - plays the current track continuously
1.To select play mode, press MODE once or more. (SHUFFLE / REPEAT on the remote control).
2.Press 2; to start playback if in the stop position.
???If you have selected shuffle, playback starts automatically.
3.To select normal playback, press MODE repeatedly until the various modes are no longer displayed.
??? You can also press the 9 to cancel your play mode in playing.
MAINTENANCE & SAFETY
AUX (audio cable not included) .(See 9)
This 3.5mm socket allows you to connect other audio equipment to your system.
1.Press y to on, then the source selector to select
AUX.
= Display shows: AUX and PHILIPS scrolls
2.Use an audio cable to connect the AUX socket to the LINE OUT/headphone socket on your external equipment.
3.To avoid noise distortion, turn down the volume on your external equipment.
4.To adjust the sound and volume, use the sound controls on your external equipment and the AZ3068.
Cassette recorder
Cassette playback
1.Press y to on, then the source selector to select TAPE.
=Display shows 
throughout tape operation.
2.Insert a cassette and close the door.
3.Press PLAY 1 to start playback.
4.To pause, press PAUSE ;;. Press PAUSE ; again to resume.
5.Press SEARCH 5/6 to fast wind the tape.
6.To stop the tape, press STOP???OPEN 9/.
Helpful Hints:
-During playback, the keys are automatically released at the end of a tape and the set is switched off (unless PAUSE mode ; has been activated.)
-During fast forwarding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released.
GENERAL INFORMATION ON RECORDING
???Recording is permissible insofar as copyright or. other rights of third parties are not infringed.
???For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes.
???The best recording level is set automatically. Altering the VOLUME or BASS controls will not affect the recording.
???To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape.
Recording from the CD Player
1Select CD source.
2Insert a CD and if desired, program track num- bers.
3Press STOP???OPEN 9// to open the cassette holder. Insert a blank tape and close the deck.
4Press RECORD 0 to start recording.
5Press 2; to start CD playback.
6For brief interruptions press PAUSE ;. To resume recording, press PAUSE ; again.
7To stop recording, press STOP???OPEN 9//.
Recording from the Radio
1Tune to the desired radio station (see Tuning to radio stations).
2Follows steps 3, 4, 6,7 under Recording from the CD Player.
MAINTENANCE & SAFETY (See 0)
CD player and disc handling
???If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair.
???The lens of the CD player should never be touched!
???Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.
???Always close the CD door to avoid dust on the lens.
???To clean the CD, wipe in a straight line from the centre towards the edge using a soft,
???Never write on a CD or attach any stickers to it.
Tape deck maintenance
To ensure quality recording and playback of the tape deck, clean parts A, B and C as shown, once a month. Use a cotton bud slightly moistened with alco- hol or a special head cleaning fluid to clean the deck.
1Open the cassette door.
2Press PLAY 1 and clean the roller C.
3Press PAUSE ; and clean the heads A, and the capstan B.
4After cleaning, press STOP/OPEN 9/.
Safety Information
???Place the set on a hard, flat and stable surface so that the system does not tilt.
???Where the MAINS plug or an appliance coupler is used as the disconnet device, the disconnet device shall remain readily operable.
???Do not expose the set, batteries, CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.
???The apparatus shall not be exposed to dripping or splashing.
???Adequate ventilation with a minimum gap of 6 inches between the ventilation holes and surround- ing surfaces is necessary to prevent heat
???The ventilation should not be impeded by covering the ventilation openings with items, such as news- papers,
???No objects filled with liquids, such as vases, shall be placed on the apparatus.
???No naked flame sources, such as lighted candles, should be placed on the apparatus.
???The mechanical parts of the set contain
???To clean the set, use a dry cloth. Do not use any cleaning agents containing alcohol, ammonia, ben- zene or abrasives as these may harm the housing.
???Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTIONS:
-Visible and invisible laser radiation. If the cover is open, do not look at the beam.
-High voltage! Do not open.You run the risk of getting an electric shock. The machine does not contain any
-Modification of the product could result in haz- ardous radiation of EMC or other unsafe opera- tion.
The making of unauthorized copies of
Specifications
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ??? 24 W
Dimensions (w x h x d) . . . . . . . . . . . . . . . . . . . . . . . . . . 471 x 153 x 251 (mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.8 kg
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric shock! Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty.
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials:cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, exhausted batteries and old equipment.
No sound /power
???Volume not adjusted
??? Adjust the VOLUME
???Power Cord not securely connected
??? Connect the AC power cord properly
???Batteries flat / incorrectly inserted
??? Insert (fresh) batteries correctly
???Headphones connected to the set
??? Disconnect headphones
???Electrostatic discharge/interference
???Unplug the set. If batteries inserted, remove batteries from the battery compartment. Press and hold
STANDBY ON y for 10 seconds, then
??? CD contains
???Press SEARCH ??? or ?? . once or more to skip to a CD audio track, instead of the data file
Severe radio hum or noise
???Electrical interference: set too close to TV, VCR or computer
??? Move the set to increase the distance
Remote control does not function properly
???Batteries flat/ incorrectly inserted
??? Insert (fresh) batteries correctly
???Distance/ angle between the set too large
??? Reduce the distance/ angle
Poor radio reception
??? Weak radio signal
??? FM / MW: Adjust the FM / MW telescopic aerial
indication
???
??? Use a finalized
indication
??? No CD inserted
??? Inserted a suitable disc
??? CD badly scratched or dirty
??? Replace/ clean CD, see Maintenance
??? Laser lens steamed up
??? Wait until lens has cleared
The CD skips tracks
???CD damaged or dirty
??? Replace or clean CD
???shuffle or program is active
??? Switch off shuffle / program
Sound skips during MP3/WMA playback
???MP3/WMA file made at compression level exceeding 320kbps
???Use a lower compression level to record CD tracks into MP3/WMA format
??? Disc damaged or dirty
??? Replace or clean disc
Poor cassette sound quality
??? Dust and dirt on the heads, etc.
???Clean deck parts, see Maintenance
??? Use of incompatible cassette types (METAL or CHROME)
???Only use NORMAL (IEC I) for recording
Recording does not work
??? Cassette tab(s) may be broken
??? Apply adhesive tape over the missing tab space
Hearing Safety
Listen at a moderate volume.
???Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss.
???Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So after prolonged listening, what sounds "normal" can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there.
To establish a safe volume level:
???Set your volume control at a low setting.
???Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
Listen for reasonable periods of time:
???Prolonged exposure to sound, even at normally "safe" levels, can also cause hearing loss.
???Be sure to use your equipment reasonably and take appropriate breaks.
Be sure to observe the following guidelines when using your headphones.
???Listen at reasonable volumes for reasonable periods of time.
???Be careful not to adjust the volume as your hearing adapts.
???Do not turn up the volume so high that you can't hear what's around you.
???You should use caution or temporarily discontinue use in potentially hazardous situations.
???Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
This product complies with the
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the per- son receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (???Warranty Period???) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period. At its option, Philips will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or ser- viceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory, or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product???s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Philips??? property. When a refund is given, your product becomes Philips??? property.
Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products manu- factured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any
Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any
This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or
Philips, or (d) if any Philips serial number has been removed or defaced, or (e) product, accessories or consumables sold ???AS IS??? without warranty of any kind by including refurbished Philips product sold ???AS IS??? by some retailers.
This Limited Warranty does not cover:
???Shipping charges to return defective product to Philips.
???Labor charges for installation or setup of the product, adjust- ment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.
???Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary con- tent for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of Philips.
???Damage or claims for products not being available for use, or for lost data or lost software.
???Damage from mishandled shipments or transit accidents when returning product to Philips.
???A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
???A product used for commercial or institutional purposes (including but not limited to rental purposes).
???Product lost in shipment and no signature verification receipt can be provided.
???Failure to operate per Owner???s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS???
Contact Philips Customer Care Center at:
TO OBTAIN ASSISTANCE IN CANADA???
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of inciden- tal or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
conditions:
1.This device may not cause harmful interference, and
2.this device must accept any interference received, includ- ing interference that may cause undesired operation.
Canada
English:
This digital apparatus does not exceed the Class B limits for radio noise emis- sions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.This Class B digital apparatus complies with Canadian
Fran??ais:
Cet appareil num??rique n'??met pas de bruits radio??lectriques d??passant les li- mites applicables aux appareils num??riques de Classe B prescrites dans le R??glement sur le Brouillage Radio??lectrique ??dict?? par le Minist??re des Communications du Canada. Cet appareil num??rique de la classe B est con- forme ?? la norme
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 671539, Marietta, GA.
3121 233 48802