EN User manual

Contents

2EN

English

EN 3

English

1 Important

Safety and important notice

Warning

???Risk of overheating! Never install the product in a con???ned space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.

???Never place the product, remote control or batteries near naked ???ames or other heat sources, including direct sunlight.

???Only use this product indoors. Keep this product away from water, moisture and liquid-???lled objects.

???Never place this product on other electrical equipment.

???Keep away from this product during lightning storms.

???Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

???Visible and invisible laser radiation when open. Avoid exposure to beam.

Disposal of your old product and batteries

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.

4EN

Please act according to your local rules and do not dispose of your old products with your normal household waste.

Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.

Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Copyright notice

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Open source software

This BD Player contains open source software. Philips hereby offers to deliver or make available, upon request, for a charge no more than the cost of physically performing source distribution, a complete machine readable copy of the corresponding source code on a medium customarily used for software interchange. This offer is valid for a period of 3 years after the date of purchase of this product.

To obtain the source code, write to Program Manager - Home Video - AVM 620A, Lorong 1,

Innovation Site Singapore Tao Payoh

English

EN 5

Singapore - 319762

Trademark notice

HDMI, and HDMI logo and High-De???nition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

???DVD Video??? is a trademark of DVD Format/Logo Licensing Corporation.

???Blu-ray Disc??? and ???Blu-ray Disc??? logo are trademarks.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent # s: 5,451,942; 5,956,674; 5,974,380;5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS 2.0+Digital Out are registered trademarks and the DTS logos, Symbol are trademarks of DTS, Inc. ??1996-2008 DTS, Inc. All Rights Reserved.

6EN

DivX, DivX Ultra Certi???ed, and associated logos are trademarks of DivX, Inc. and are used under license.

Of???cial DivX?? Ultra Certi???ed product.

Plays all versions of DivX?? video (including DivX?? 6) with enhanced playback of DivX?? media ???les and the DivX?? Media Format.

Plays DivX?? video with menus, subtitles and audio tracks.

Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.

BONUSVIEW???

???BONUSVIEW??? is a trademark of Blu-ray Disc Association.

???x.v.Colour??? is a trademark of Sony Corporation.

CLASS 1

LASER PRODUCT

English

2 Your product

Congratulations on your purchase, and welcome to Philips!To fully bene???t from the support that Philips offers, register your product at www.philips. com/welcome.

Feature highlights

Philips EasyLink

EN 7

Your product supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control.

Note

??? Philips does not guarantee 100% interoperability with all HDMI CEC devices.

High-De???nition entertainment

Watch high-de???nition content disc with HDTV (High De???nition Television). Connect it through a high speed HDMI cable (1.3 or category 2). You can enjoy excellent picture quality up to 1080p resolution with the frame rate of 24 frames per second with progressive scan output.

BONUSVIEW/PIP (Picture-in-Picture)

This is a new function of BD-Video that plays the primary video and secondary video simultaneously. Blu-ray players with Final Standard Pro???le or Pro???le 1.1 specs can play Bonus View features.

Upscale DVD for enhanced picture quality

Watch the discs in the highest picture quality available for the HDTV. Video upscaling increases

the resolution of standard de???nition disc to high de???nition up to 1080p over an HDMI connection.

A highly detailed picture and increased sharpness delivers a more true-to- life picture.

Playable media

This product can play:

???BD-Video, BD-R/RE2.0

???DVD, DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Dual Layer)

???Video CD/SVCD

???Audio CD, CD-R/CD-RW, MP3-CD, WMA-CD

???DivX (Ultra)-CD, Picture CD

8EN

Region codes

You can play discs with the following region codes.

Region code

Country

Asia Paci???c,

Taiwan, Korea

English

Product overview

Main unit

a

??? Turn on this product or switch to standby mode.

b Disc compartment

cIR sensor

??? Point the remote control at the IR sensor.

d Display panel

e

???Open or close the disc compartment.

f

??? Start or resume play.

g

???Pause play.

EN 9

10 EN

Remote control

English

a

???Turn on this product or switch to standby mode.

???When EasyLink is enabled, press and hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby.

bBONUSVIEW

???Turn on or off the secondary video in a small screen window during play (applicable only to BD-video that supports the BONUSVIEW or Picture-In-Picture feature).

c TOP MENU

EN 11

???BD: Display the top menu.

???DVD: Display the title menu.

d

???Access the home menu.

eDISC MENU / POP-UP MENU

???BD: Access or exit the pop-up menu.

???DVD: Access or exit the disc menu.

fOK

??? Con???rm an entry or selection.

g

??? Navigate through the menus.

h BACK

???Return to a previous display menu. i /

???Skip to the previous or next title, chapter, or track.

j /

???Search backward or forward.

k

???Mute volume (applicable only to certain Philips brand TVs).

l +/-

??? Adjust volume (applicable only to certain Philips brand TVs).

mSUBTITLE

??? Select a subtitle language on a disc.

nAUDIO

??? Select an audio language or channel on a disc.

oAlphanumeric buttons

???Select an item to play.

???Enter values.

p

???Open or close the disc compartment.

qTV CH +/-

???Select a TV channel (applicable only to certain Philips brand TVs).

12 EN

r

???Stop play.

s

???Pause play.

???Move the paused picture one step forward.

t

??? Start or resume play.

uINFO

???Display the current status or the disc information.

vOPTIONS

??? Access options for the current activity or selection.

wColor buttons

??? BD: Select tasks or options.

xHDMI

??? Select the video resolution of HDMI output.

yREPEAT

??? Select repeat play or random play.

3 Connect

Make the following connections to use this product.

Basic connections:

???Video

???Audio

???Power

Optional connections:

???Route audio to other devices

???Digital ampli???er/receiver

???Analog stereo system

???USB device (As additional memory for software updates and BonusView contents. NOT for media play)

English

EN 13

Note

???Refer to the type plate at the back or bottom of the product for identi???cation and supply ratings.

???Before you make or change any connections, ensure that all devices are disconnected from the power outlet.

???Different types of connectors can be used to connect this product, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www.connectivityguide.philips.com.

Connect video/audio cables

Connect this product toTV to view disc play.

Select the best video connection that theTV can support.

???Option 1: Connect to the HDMI jack (for a HDMI, DVI or HDCP- compliant TV).

???Option 2: Connect to the composite video jack (for a standard TV).

Note

??? You must connect this product directly to a TV.

Option 1: Connect to the HDMI jack

HDMI IN

1Connect an HDMI cable (not supplied) to

???the HDMI jack on this product.

???the HDMI input jack on the TV.

14 EN

Tip

Option 2: Connect to the composite video jack

AUDIO IN

VIDEO IN

1Connect a composite video cable to:

???the VIDEO jack on this product.

???the VIDEO input jack on the TV.

2Connect the audio cables to:

???the AUDIO L/R-AV OUTPUT jacks on this product.

???the AUDIO input jacks on the TV.

Tip

???The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.

???This type of connection provides standard picture quality.

EN 15

Route audio to other devices

To enhance audio play, you can route the audio from this product to other devices.

Connect to digital ampli???er/receiver

COAXIAL

1Connect a coaxial cable (not supplied) to:

???the COAXIAL jack on this product.

???the COAXIAL/DIGITAL input jack on the device.

Connect analogue stereo system

AUDIO IN

1Connect the audio cables to:

???the AUDIO L/R-AV OUTPUT jacks on this product.

???the AUDIO input jacks on the device.

Connect USB device

A USB device provides an additional memory to enjoy software updates and BonusView contents.

16 EN

1Connect the USB device to the USB jack on the back of this product.

Connect power

Caution

???Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.

???Before connecting the AC power cord, ensure you have completed all other connections.

Note

???The type plate is located on the back of the product.

1 Connect the AC power cable to the wall socket. ?? This product is ready to be set up for use.

4 Get started

Caution

???Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

EN 17

Prepare the remote control

Caution

???Risk of explosion! Keep batteries away from heat, sunshine or ???re. Never discard batteries in ???re.

1Open the battery compartment.

2Insert 2 AAA batteries with correct polarity (+/-) as indicated.

3Close the battery compartment.

Note

???If you are not going to use the remote control for a long time, remove the batteries.

???Do not use old and new or different types of batteries in combination.

???Batteries contain chemical substances, so they should be disposed of properly.

Find the correct viewing channel

1Press to turn on this product.

2Turn on the TV and switch to the correct video-in channel (refer to the TV user manual on how to select the correct input channel).

Use the Home menu

Settings

1Press .

???To start disc play, select [Play Disc].

???To access the setup menus, select [Settings].

18 EN

Navigate the menu

Select menu display language

Note

???If this product is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting (if the language set on TV is supported by this product).

1In the Home menu, select [Settings] and press OK.

2Select [Preference Setup], then press.

3 Select [Menu Language], then press .

???The language options may vary from different regions.

EN 19

4Press to select a language, then press OK.

Use Philips EasyLink

This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol.You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors.

Note

???To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other devices connected to TV. Refer to the TVs/devices manual for details.

One-touch play

1Press the STANDBY button to turn on this product.

??TheTV (if supports one-touch play) automatically turns on and switches to the correct video-in channel.

??If a disc is loaded in this product, disc play automatically starts.

One-touch standby

1Press and hold the STANDBY button on the remote control for more than 3 seconds.

??All the connected devices (if the device supports one-touch standby) automatically switch to standby.

Note

??? Philips does not guarantee 100% interoperability with all HDMI CEC devices.

20 EN

5 Play

Play a disc

Caution

???Do not place any objects other than discs into the disc compartment.

???Do not touch the disc optical lens inside the disc compartment.

1Press to open the disc compartment.

2Insert a disc with its label facing up.

3Press to close the disc compartment and start disc play.

???To view disc play, turn on the TV to the correct viewing channel

for this product.

???To stop disc play, press .

Note

???Check disc/???le formats supported (see ???Your product??? > ???Playable media???).

???If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see ???Adjust settings??? > ???Preference Setup??? > [Parental Control]).

???If you pause or stop a disc, the screen saver appears after 10 minutes of inactivity. To deactivate the screen saver, press any button.

???After you pause or stop a disc and no button is pressed within 30 minutes, this product automatically switches to standby.

Play video

Control video play

1Play a title.

2Use the remote control to control the play.

English

EN 21

Button

/

/

Note

Action

Pause play.

Start or resume play.

Stop play.

Skip to a previous/next title or chapter.

Search fast-backward or fast-forward. Press repeatedly to change the search speed.

???In pause mode, slow a play backward or forward.

??? For BD disc with Java application, the resume function is not available.

Change video play

1Play a title.

2Use the remote control to change the play.

22 EN

Button Action

SUBTITLE Select the subtitle language on a disc.

REPEAT Select or turn off repeat or shuf???e mode.

???Repeat options may vary from the disc type.

???For VCDs, repeat play is only possible when the PBC mode is turned off.

BONUSVIEW Turn on or off the secondary video in a small screen window during play (applicable only to BD-video that supports the BONUSVIEW or Picture-In-Picture feature).

Note

???Some operations may not work with some discs. See the information accompanying the disc for details.

Display menu

BD-video disc

???TOP MENU stop the video play and shows the disc menu. This feature is disc-dependent.

???POP-UP MENU access to the BD-video disc menu without interrupting disc play.

DVD-video disc

???TOP MENU display the root menu of a disc.

English

EN 23

???DISC MENU display disc information and guide you through the available functions in the disc.

VCD/SVCD/DivX disc:

???DISC MENU display the content of the disc.

Tip

???If the PBC setting is off, the VCD/SVCD skips the menu and starts play from the ???rst title. To display the menu before play, turn on the PBC setting (see ???Adjust settings??? >

[Preference Setup] > [PBC]).

Select title/chapter

1During play, press OPTIONS.

?? The play options menu is displayed.

2Select [Title] or [Chapter] in the menu, then press OK.

3Select the title or chapter number, then press OK.

Skip play to a speci???c time

1During play, press OPTIONS.

?? The play options menu is displayed.

2Select [Time Search] in the menu, then press OK.

3Press the Navigation buttons () to change the time to skip to, then press OK.

Zoom in/out

1During play, press OPTIONS.

?? The play options menu is displayed.

2Select [Zoom] in the menu, then press OK.

3Press the Navigation buttons ()to select a zoom factor, then press OK.

4Press the Navigation buttons to pan through the zoomed picture.

???To cancel zoom mode, press BACK or OK to display the zoom factor bar, then press the Navigation buttons () until the zoom factor [x1] is selected.

24 EN

Repeat play for a speci???c section

1During play, press OPTIONS.

?? The play options menu is displayed.

2Select [Repeat A-B] in the menu, then press OK to set the starting point.

3Forward the video play, then press OK to set the ending point. ?? Repeat play starts.

???To cancel repeat play mode, press OPTIONS, select [Repeat A-B] and press OK.

Note

??? The marked section for repeat play is only possible within a track/title.

English

View video play from different camera angles

1During play, press OPTIONS.

?? The play options menu is displayed.

2Select [Angle List] in the menu then press .

3Select an angle option, then press OK. ?? Play changes to the selected angle.

Note

??? Applicable only to discs that contain multi-angle scenes.

Shift subtitle display

This feature is only available if you have set the [TV Display] to [Cinema 21:9] (see ???Adjust settings??? > ???Video Setup???).

1During play, press OPTIONS.

?? The play options menu is displayed.

2Select [Shift Subtitle] in the menu, then press .

3Press the Navigation buttons () to shift the subtitle, then press

OK.

EN 25

Tip

???You can press SUBTITLE on the remote control to access Shift Subtitle feature.

???Subtitle Shift is not supported for DivX video with external subtitles.

???Subtitle Shift setting is not retained after disc is removed.

Play BD-video

Blu-ray video disc has a larger capacity and supports features such as high-de???nition videos, multi-channel surround sounds, interactive menus and so on.

1Insert a BD-video disc.

2Press , select [Play Disc] then press OK.

3Play automatically starts, or select a play option in the menu and press OK.

???During play, you can press TOP MENU to display additional information, features or content stored in the disc.

???During play, you can press POP-UP MENU to display the disc menu without interrupting disc play.

Enjoy BONUSVIEW

(Applicable only to a disc compatible with the BONUSVIEW or Picture- in-Picture feature)

You can instantly view additional content (such as commentaries) in a small screen window.

A Primary video

B Secondary video

1Press BONUSVIEW to turn on the secondary video window.

2Press OPTIONS.

26 EN

?? The play options menu is displayed.

3Select [2nd Audio Language] or [2nd Subtitle Language] in the menu, then press .

4Select the language to play, then press OK.

Play DivX?? video

DivX video is a digital media format that retains high quality despite a high rate of compression. You can enjoy DivX video on this DivX certi???ed product.

1Insert a disc that contains the DivX videos.

2Press , select [Play Disc], then press OK. ?? A contents menu is displayed.

3Select a video folder, then press OK.

4Select a title to play, then press OK.

5Use the remote control to control the play.

Note

???You can only play DivX videos that were rented or purchased with the DivX registration code of this product (see ???Adjust Settings??? > [Advanced Setup] > [DivX?? VOD Code]).

???You can play DivX video ???les of up to 4GB.

???This product can display up to 45 characters in the subtitle.

English

Play music

Control a track

1Play a track.

2Use the remote control to control the play.

EN 27

Button

/

/

REPEAT

Action

Pause play.

Start or resume play.

Stop play.

Skip to a previous/next track.

Select an item to play.

Search fast-backward or fast-forward. Press repeatedly to change the search speed.

Select or turn off repeat or shuf???e mode.

Play MP3/WMA music

MP3/WMA is a type of highly compressed audio ???le (???les with .mp3, .wma extensions).

1Insert a disc that contains the MP3/WMA music.

2Press , select [Play Disc], then press OK. ?? A contents menu is displayed.

3Select a music folder, then press OK.

4Select a ???le to play, then press OK.

??? To return to the main menu, press BACK.

28 EN

Note

Play photo

Play photo as slideshow

You can play JPEG photos (???les with .jpeg or .jpg extensions).

1Insert a disc that contains the JPEG photos.

2 Press , select [Play Disc], then press OK. ?? A contents menu is displayed.

3Select a photo folder, then press OK to enter.

???To select a photo, press the Navigation buttons.

???To enlarge the selected photo and start slideshow, press OK.

4 Press OK to start slideshow play.

Note

???It may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc.

???This product can only display digital camera pictures according to the JPEG-EXIF format, typically used by almost all digital cameras. It cannot display Motion JPEG, or pictures in formats other than JPEG, or sound clips associated with pictures.

???Folders/???les that exceed the supported limit of this product cannot be displayed or played.

Control photo play

1Play a photo slideshow.

2Use the remote control to control the play.

EN 29

Button

/

/

Action

Rotate a photo anti-clockwise/clockwise.

Flip a photo horizontally/vertically.

Stop play.

Note

??? Some operations may not work with some discs or ???les.

Set slideshow interval and animation

1During play, press OPTIONS.

?? The play options menu is displayed.

2Select [Duration per slide] in the menu, then press OK.

3Select a duration, then press OK.

4Select [Slide Animation] in the menu, then press OK.

5Select a type of animation effect, then press OK.

Play musical slideshow

Create a musical slideshow to play simultaneously MP3/WMA music ???les and JPEG photo ???les.

Note

???To create a musical slideshow, you must store the MP3/WMA and JPEG ???les on the same disc.

1Play MP3/WMA music.

30 EN

???To stop the music play, press again.

6 Adjust settings

Note

???If the setup option is grayed out, it means the setting cannot be changed at the current state.

Video setup

1Press .

2Select [Settings], then press OK.

3Select [Video Setup], then press .

4Select an option, then press OK.

5Select a setting, then press OK.

???To return to the previous menu, press BACK.

???To exit the menu, press .

[Audio]

Select an audio language for disc play.

[Subtitle]

Select a subtitle language for disc play.

[Disc Menu]

Select a language for disc menu.

English

EN 31

Note

???If the language you have set is not available on the disc, the disc uses its own default language.

???For some discs, the subtitle/audio language can only be changed from the disc menu.

[TV Display]

Select a display format:

???[4:3 Letterbox] ??? For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen.

???[4:3 Panscan] ??? For 4:3 screen TV: full-height display with the trimmed sides.

???[16:9 Widescreen] ??? For wide-screen TV: display picture at ratio 16:9.

???[16:9] ??? For 16:9 screen TV: display picture at ratio 4:3 for a disc with 4:3 ratio, with black bars on the left and right side of the screen.

???[Cinema 21:9] ??? For wide-screen TV of display ratio 21:9, remove black bars at the bottom and top of the screen.

Note

???If [4:3 Panscan] you have selected is not supported by the disc, the screen displays in the [4:3 Letterbox] format.

???Help text display is available in all modes, except [Cinema 21:9].

???Subtitle Shift function is enabled only in [Cinema 21:9] mode.

???For optimum viewing with Philips Cinema 21:9 TV, refer to the TV???s user manual.

[HDMI Video]

Select an HDMI video output resolution that is compatible with your TV display capability.

???[Auto] - Detect and select the best supported video resolution automatically.

32 EN

???If the setting is not compatible with your TV, a blank screen appears. Wait for 10 seconds for auto recovery, or press repeatedly the HDMI button until the picture appears.

[HDMI Deep Color]

This feature is available only when the display device is connected by a HDMI cable, and when it supports deep color feature.

???[Auto] - Enjoy vivid images in over a billion colors on Deep Color enabled TV.

???[Off] - Output standard 8 bit color.

[Picture Settings]

Select a prede???ned set of picture color settings.

???[Standard] ??? Original color setting.

???[Vivid] ??? Vibrant color setting.

???[Cool] - Soft color setting.

???[Action] ??? Sharp color setting. It enhances the details in the dark area. Ideal for action movies.

???[Animation] ??? Contrast color setting. Ideal for animated pictures.

Audio Setup

EN 33

4Select an option, then press OK.

5Select a setting, then press OK.

???To return to the previous menu, press BACK.

???To exit the menu, press .

[Night Mode]

Make a loud sound level softer and a soft sound level louder to play the disc at a low volume, without disturbing other persons.

???[Auto] - Applicable to tracks with Dolby True HD audio.

???[On] ??? For quiet viewing at night.

???[Off] ??? For surround sound with a full dynamic range.

Note

??? Applicable only to Dolby encoded DVD-video or BD-video.

[HDMI Audio]

Select an HDMI audio output when you connect this product and the TV/ audio device with an HDMI cable.

???[Bitstream] ??? Select the best original HD audio experience (only via an HD audio compatible receiver).

???[Auto] ??? Detect and select the best supported audio format automatically.

[Digital Audio]

Select an audio format for the sound output from the DIGITAL OUT jack (coaxial/optical).

???[Auto] - Detect and select the best supported audio format automatically.

???[PCM] - The audio device does not support multi-channel format. Audio is downmixed to two-channel sound.

???[Bitstream] - Select the original audio to experience Dolby or DTS audio (BD-video special sound effect is disabled).

Note

???Ensure that the audio format is supported by the disc and the connected audio device (ampli???er/receiver).

???When [Bitstream] is selected, interactive audio like button sound is muted.

34 EN

[PCM Downsampling]

Set the sampling rate for PCM audio output from the DIGITAL OUT jack (coaxial/optical).

???[On] - PCM audio is down-sampled at 48kHz.

???[Off] - For BD or DVD recorded in LPCM without copyright protection, two-channel audio signals up to 96 kHz are output as LPCM signals with no conversion.

Preference Setup

1Press .

2Select [Settings], then press OK.

3Select [Preference Setup], then press.

English

Video Setup

Audio Setup

Preference Setup

EasyLink Setup

Advanced Setup

4Select an option, then press OK.

5Select a setting, then press OK.

???To return to the previous menu, press BACK.

???To exit the menu, press .

[Menu Language]

Select an on-screen menu language.

Note

???If this product is connected to an HDMI CEC compliant TV using a HDMI cable, it switches automatically to the same menu display language as per your TV setting (if the language set on TV is supported by this product).

[Parental Control]

EN 35

Restrict access to discs that are unsuitable for children. These types of discs must be recorded

with ratings.

To access, enter your last set password or ???0000???.

Note

???Rated discs above the level you set in [Parental Control] require a password to be played.

???The ratings are country-dependent. To allow all discs to play, select ???8??? for DVD-video and BD-Video.

???Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs.

[Screen Saver]

Turn on or off the screen saver mode. It helps to protect the TV screen from being damaged due to over exposure to static image for being too long.

???[On] - Set the screen saver active after 10 minutes of inactivity (for example, in the pause or stop mode)

???[Off] - Disable screen saver mode.

[Change Password]

Set or change the password.

1)Press the Numeric buttons to enter the password or your last set password. If you forget the password, enter ???0000???, then press OK.

2)Enter the new password.

3)Enter the same password again.

4)Move to [Con???rm] in the menu and press OK.

[Display Panel]

Select a brightness level of the front panel display.

???[Normal] - Normal brightness.

???[Dim] - To dim display.

[Auto Standby]

Turn on or off auto standby mode. It is an energy saving feature.

???[On] - Switch to standby after 30 minutes of inactivity (for example, in pause or stop mode).

36 EN

???[Off] - Disable auto standby mode.

[VCD PBC]

Turn on or off the content menu of VCDs/SVCDs with PBC (playback control) feature.

???[On] - Display the index menu when you load a disc for play.

???[Off] - Skip the menu and start play from the ???rst title.

EasyLink Setup

1Press .

2Select [Settings], then press OK.

3Select [EasyLink Setup], then press.

Preference Setup

EasyLink Setup

Advanced Setup

4Select an option, then press OK.

5Select a setting, then press OK.

???To return to the previous menu, press BACK.

???To exit the menu, press .

[EasyLink]

This product supports Philips Easylink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control all EasyLink-compliant devices that are connected through HDMI connectors.

???[On] - Turn on EasyLink features.

???[Off] - Disable EasyLink features.

[One Touch Play]

When you press the STANDBY button to turn on this product, the TV (if the TV supports one-touch play) automatically turns on and switches to the video-in channel. Disc play starts if there is a disc in this product.

???[On] - Turn on one-touch play feature.

English

EN 37

???[Off] - Disable one-touch play feature.

[One Touch Standby]

When you press and hold the STANDBY button on the remote control, all the connected HDMI CEC devices (if the device supports one-touch standby) switch to standby mode simultaneously.

???[On] - Turn on one-touch standby feature.

???[Off] - Disable one-touch standby feature.

Note

???You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the TV/devices manual for details.

???Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.

Advanced Setup

1Press .

2Select [Settings], then press OK.

3Select [Advanced Setup], then press .

4Select an option, then press OK.

5Select a setting, then press OK.

???To return to the previous menu, press BACK.

???To exit the menu, press .

[Software Download]

Update the software of this product (if a latest version is available on Philips website) to enhance the playability of this product.

???[USB] - Download software from the USB device which is connected to this product.

38 EN

Note

??? For detailed software updating, see ???Additional information??? > ???Update software???.

[Clear Memory]

Remove some Blu-ray disc data (such as BonusView) that are automatically copied on the connected USB device.

Tip

???On the connected USB device, a folder named ???BUDA??? is automatically created to store some necessary data from Blu-ray disc.

[DivX?? VOD Code]

Display the DivX?? registration code.

Tip

???Use this product???s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX?? VOD (Video On Demand) service can be played only on the device to which it is registered.

[Version Info.]

Display the software version and the MAC address of this product.

Tip

???This information is needed for you to check if a latest software version is available at the Philips website so that you can download and install on this product.

[Restore Default Settings]

Reset all the settings of this product to the factory settings, except for

[Parental Control] setting.

EN 39

English

7 Additional Information

Update software

For software updates to enchance performance, check the current software version of this product to compare with the latest software (if available) at the Philips website.

1Press .

2Select [Settings], then press OK.

3Select [Advanced Setup] > [Version Info.], then press OK.

Update software via USB

1Go to www.philips.com/support to check if the latest software version is available for this product.

2Download the software onto a USB ???ash drive.

3Insert the USB ???ash drive to the USB jack of the rear panel.

4In the Home menu, select [Settings] > [Advanced Setup] > [Software Download] > [USB].

5Follow the instructions on the TV screen to con???rm update operation.

??Once software update is complete, this product automatically turns off to standby.

6Disconnect the power cord for a few seconds and connect again to turn on this product.

Note

???Do not turn off the power or remove the USB ???ash drive when software updating is in progress to prevent possible damage of this product.

40 EN

Care

Caution

???Never use solvents such as benzene, thinner, cleaners available commercially, or anti- static sprays intended for discs.

Clean discs

Wipe the disc with a micro ???bre cleaning cloth from the centre to the edge in a straight line movement.

English

8 Specifications

Note

??? Speci???cation and design are subject to change without notice

Video

???Signal system: PAL / NTSC

???Composite video output: 1 Vp-p (75 ohm)

???HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p24

Audio

???2 Channel analog output

???Audio Front L&R : 2 Vrms (> 1 kohm)

???Digital output: 0.5 Vp-p (75 ohm)

???Coaxial

???HDMI output

???Sampling frequency:

???MP3: 32 kHz, 44.1 kHz, 48 kHz

???WMA: 44.1 kHz, 48 kHz

???Constant bit rate:

???MP3: 112 kbps - 320 kpbs

???WMA: 48 kpbs - 192 kpbs

USB

EN 41

???As additional memory for software updates and BonusView contents. Not for media play.

Main unit

???Power supply rating

??? 110~240V ~AC, 50~60 Hz

???Power consumption: 25W

???Power consumption in standby mode: 0.5 W

???Dimensions (w x h x d): 360 x 54 x 240 (mm)

???Net Weight: 2.5 kg

Accessories supplied

???Remote control and batteries

???Audio/Video cables

???User manual

Laser Speci???cation

???Laser Type:

???BD Laser Diode: InGaN/AIGaN

???DVD Laser Diode: InGaAIP

???CD Laser Diode: A IGaAs

???Wave length:

???BD: 405 +5nm/-5nm

???DVD: 650 +13nm/-10nm

???CD: 790 +15nm/-15nm

???Output power:

???BD: Max. ratings: 20mW

???DVD: Max. ratings: 7mW

???CD: Max. ratings: 7mW

9 Troubleshooting

Warning

??? Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.

42 EN

If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome.

If you contact Philips, you will be asked for the model and serial number of your product.The model number and serial number are on the back of your product.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Main unit

No reaction to the remote control.

???Connect this product to the power outlet.

???Point the remote control at the IR sensor located on the front panel of this product.

???Insert the batteries correctly.

???Insert new batteries in the remote control.

Picture

No picture.

???See TV manual for correct video input channel selection. Change the TV channel until you see the Philips screen.

No picture on HDMI connection.

???If this product is connected to an unauthorized display device with an HDMI cable, the audio/video signal may not be output.

???Check if the HDMI cable is faulty. Replace a new HDMI cable.

???If this happens when you change the [HDMI Video] setting, press

HDMI on the remote control repeatedly until picture appears.

No high-de???nition video signal on the TV.

???Make sure that the disc contains high-de???nition video.

???Make sure that the TV supports high-de???nition video.

Sound

No audio output from the TV.

???Ensure that the audio cables are connected to the audio input of the TV.

English

EN 43

???Assign the audio input of the TV to the corresponding video input. See the TV user manual for details.

No audio output from the loudspeakers of the audio device (stereo system/ampli???er/receiver).

???Ensure that the audio cables are connected to the audio input of the audio device.

???Turn on the audio device to its correct audio input source.

No sound on HDMI connection.

???You may not hear any sound from the HDMI output if the connected device is non-HDCP compliant or only DVI-compatible.

No secondary audio output for Picture-in-Picture feature.

???When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected, interactive sound like secondary sound for Picture-in- Picture feature is muted. Deselect [Bitstream].

Play

Disc cannot be played.

???Ensure that the disc is correctly loaded.

???Ensure that this product supports the disc. See ???Your product??? > ???Playable media???.

???Ensure that this product supports the region code of the DVD or BD.

???For DVD??RW or DVD??R, ensure that the disc is ???nalized.

???Clean the disc.

Data ???les (JPEG, MP3, WMA) cannot be played or read.

???Ensure that the data ???le was recorded in the UDF, ISO9660 or JOLIET format.

???Ensure that the selected group (folder) does not contain more than 9,999 ???les for DVD, and 999 ???les for CD.

???Ensure that the JPEG ???le extension is.jpg, .JPG, .jpeg or .JPEG.

???Ensure that the MP3/WMA ???le extension is .mp3 or .MP3, and .wma or .WMA for windows Media??? Audio.

???No entry??? sign appears on the TV.

???The operation is not possible.

EasyLink feature does not work.

44 EN

???Ensure that this product is connected to the Philips brand EasyLink TV and the [EasyLink] in the menu is set to [On].

The USB device cannot be played on this product.

???This product cannot play any audio/video/photo ???le stored on a USB device. USB connection works only for software updates and BonusView contents.

10 Glossary

A

Aspect ratio

Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-de???nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.

B

Blu-ray Disc (BD)

Blu-ray Disc is a next generation optical video disc capable of storing ???ve times more data than

a conventional DVD. The large capacity makes it possible to bene???t from the features such as

high-de???nition videos, multichannel surround sound, interactive menus and so on.

BONUSVIEW

This is a BD-Video (Final Standard Pro???le or Pro???le 1.1) that supports interactive content encoded on the disc, such as picture-in-picture. This means you can play the primary video and secondary video simultaneously.

English

EN 45

D

Digital Audio

Digital Audio is a sound signal that has been converted into numerical values. Digital sound can be transmitted through multiple channels. Analogue sound can only be transmitted through two channels.

DivX Video-On-Demand

This DivX Certi???ed ?? device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx. com with this code to complete the registration process and learn more about DivX video.

Dolby Digital

A surround sound system developed by Dolby Laboratories that contains up to six channels of digital audio (front left and right, surround left and right, center and subwoofer.)

DTS

Digital Theatre Systems. A surround sound system for providing 5.1 channels of discrete digital audio in consumer electronics products and software content. It is not developed by Dolby Digital.

H

HDCP

High-bandwidth Digital Content Protection. This is a speci???cation that provides a secure transmission of digital contents between different devices (to prevent unauthorized copyright.)

HDMI

High-De???nition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high de???nition video and digital multichannel audio. It delivers high quality picture and sound quality, completely free from noise. HDMI is fully backward-compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP

46 EN

(High-bandwidth Digital Content Protection) will result in no Video or Audio output.

J

JPEG

A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. Files are recognized by their ???le extension ???.jpg??? or ???.jpeg.???

M

MP3

A ???le format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD.

P

PBC

Playback Control. A system where you navigate through a Video CD/ Super VCD with on-screen menus that are recorded onto the disc. You can enjoy interactive playback and search.

PCM

Pulse Code Modulation. A digital audio encoding system.

R

Region code

A system that allows discs to be played only in the region designated. This unit only plays discs that have compatible region codes. You can ???nd the region code of your unit on the product label. Some discs are compatible with more than one region (or ALL regions.)

English

EN 47

W

WMA

Windows Media??? Audio. Refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded with Windows Media player version 9 or Windows Media player for Windows XP. Files are recognized by their ???le extension ???.wma.???

48 EN

?? 2009 Koninklijke Philips Electronics N.V. All rights reserved. BDP2500_98_UM_V1.0_945