A a

Parts identification

(See fig. 1)

A Protective cap

B Outer blade

C Outer blade frame

D Inner blade

EJoint

FLight

GOn/off switch

Slide the switch upward to turn the trimmer on.

HBody

IBattery cover

To remove the outer blade frame, turn it and match the line c with d and pull upward. (See fig. 3)

Detach the inner blade from the outer blade. Wipe the blades with a tissue to remove any cut hairs, dust, etc.

THE WHOLE UNIT CAN BE

WASHED IN WATER.

DO NOT USE BOILED WATER. Next, put the inner blade back into the outer blade. To attach the outer blade frame to the body, match the mark c with d, and turn clockwise until it clicks in.

READ ALL INSTRUCTIONS

BEFORE USE.

For your convenience...

Attach the protective cap A to the battery cover I while you trim the nose and ear hairs.

Replacing battery

(See fig. 2)

Turn the battery cover counter clock- wise and match the line a with b and pull to remove. Insert one ???AA??? Alkaline battery. To replace the battery cover, reverse the above procedure.

Using your trimmer

Turn on the switch and carefully insert the tip of the outer blade frame into your nostril or ear hole to trim the nose and ear hairs.

Caution

Do not insert the device further into your nostril or ear hole than the nar- row tip on the outer blade. Also, do not press the trimmer forcefully into your nostril, or ear hole.

Do not attempt to use the device if the outer blade frame or blades are deformed or damaged, as injury to your nostril or ear hole may occur. This trimmer is designed only for cut- ting nose or ear hairs. Do not attempt to use it for any other purpose. The blades have been precision manufac- tured. Do not subject them to exces- sive force, impact, etc.

Be sure that the switch is turned off before attempting to clean the blades. If used once a week for approx. 1 min. at a time, the life of the blades is approx. 3 years.

Built-in light illuminates the grooming area for complete grooming.

Maintenance

Be sure that the switch is turned off before removing, replacing or clean- ing the blades.

Specifications

Power source: 1.5V DC

(One ???AA??? Alkaline battery, not included) Weight: 3.2 oz (90 g)

(including battery)

This product is intended for household use only.