Operating Instructions
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
Model No.
Before connecting, operating or adjusting this product, please read the instructions completely.
For USA and Puerto Rico assistance, please call:
Operating Instructions
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
Model No.
Before connecting, operating or adjusting this product, please read the instructions completely.
For USA and Puerto Rico assistance, please call:
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
2
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian
Information for Your Safety
Keep the unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games, radio transmitters,
???Do not use the camera near cell phones because doing so may result in noise adversely affecting the pictures and sound.
???If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove the battery and/or the connected AC adaptor. Then reinsert the battery and/or reconnect the AC adaptor and turn the camera on.
VQT3N27
The lens can be used with a digital camera compatible with the lens mount standard for the ???Micro Four ThirdsTM System???.
???It cannot be mounted on the Four ThirdsTM mount specification camera.
???The digital camera illustrations in these operating instructions show
???The appearance and specifications of products described in this manual may differ from the actual products you have purchased due to later enhancements.
???Micro Four ThirdsTM and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries.
???Four ThirdsTM and Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries.
???G MICRO SYSTEM is a lens exchange type digital camera system of LUMIX based on a Micro Four Thirds System standard.
ENGLISH
???LEICA is a registered trademark of Leica Microsystems IR GmbH. SUMMILUX is a registered trademark of Leica Camera AG. The LEICA DG lenses are manufactured using measurement instruments and quality assurance systems that have been certified by Leica Camera AG based on the company???s quality standards.
???Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned.
3
VQT3N27
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
???Reorient or relocate the receiving antenna.
???Increase the separation between the equipment and receiver.
???Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
???Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user???s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company Telephone No.:
4
VQT3N27
Precautions
???Lens Care
???Sand and dust can damage the lens. Make sure that no sand or dust gets inside the lens or the terminals when using the lens on a beach, etc.
???This lens is not waterproof. If drops of water get onto the lens, wipe the lens with a dry cloth.
???Do not press the lens with excessive force.
???When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures.
???Do not place the lens mount facing downwards. Do not allow the lens contact points 1 to become dirty.
???About Condensation (Fogging of the
Lens)
???Condensation occurs when there are differences in temperature and humidity as described below. Condensation can cause the lens to become dirty and lead to mold and malfunctioning, so exercise caution in the following situations:
???When the camera is brought indoors from outside during cold weather
???When the camera is brought into an air- conditioned car
???When cold air from an air conditioner is directly blown onto the lens
???In humid places
???Put the camera into a plastic bag to allow it to acclimatize to the surrounding temperature in order to prevent condensation. If condensation occurs, turn the power off and leave it for about two hours. Once the camera acclimatizes to the surrounding temperature the condensation will go away naturally.
5
VQT3N27
Supplied Accessories
[Inspection to be performed when you unpack the unit]
When removing the unit from its packing box, check that the main unit and the supplied accessories are there and also check their external appearance and functions to verify that they have not sustained any damage during distribution and transportation.
If you discover any trouble, contact your vendor before using the product.
Product numbers correct as of July 2011. These may be subject to change.
VFC4456 VYC1063 VYF3284 VFC4605
1Lens Storage Bag
2Lens Hood
3Lens Cap
4Lens Rear Cap
(The lens rear cap and lens cap are attached to the interchangeable lens at the time of purchase.)
6
Attaching/Detaching the Lens
???Refer also to the camera???s operating instructions for attaching and detaching the lens.
???Attaching the Lens
??? Check that the camera is turned off.
1 Turn the lens rear cap to detach it.
???Do not press the lens release button C when you attach a lens.
???Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched.
???Check that the lens is attached correctly.
VQT3N27
??? Attach the lens rear cap so that the lens contact point does not get scratched.
???Attach the body cap to the camera so no dirt or dust will get inside the main unit.
???Attaching and Detaching the Lens Cap Pinch the lens cap as shown in the figure to attach or detach.
??? Be careful not to lose the lens cap.
???Attaching the Lens Hood (Supplied Accessory)
Insert the lens hood into the lens with the short sides at the top and bottom, and turn in the direction of the arrow until it stops.
E: Fit to the mark
???When taking pictures with the flash with the lens hood attached, the lower portion of the screen may turn dark (vignetting effect) and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood.
???When using the AF assist lamp in the dark, detach the lens hood.
7
VQT3N27
???Attaching Filters
???Vignetting may occur if using 2 or more MC protectors (optional:
PL filters (optional:
(optional:
???The filter may become impossible to remove if excessively tightened, so please refrain from tightening it too strongly.
???It is possible to attach the lens cap with the filter already attached.
???You cannot attach a conversion lens or adaptor to this lens. A filter may be used, but attaching any other element may cause damage to the lens.
8
Names and Functions of
Components
4
1Lens surface
2Focus ring
Rotate to focus when taking pictures with manual focus.
3Contact points
4Lens fitting mark
VQT3N27
Note
???Change in the image by the focus operation may be more visible depending on the recording condition when the AF operates during the motion picture recording. It is recommended to fix the focus by setting the camera to manual focus (MF), etc., when the change of image is disturbing you.
Cautions for Use
Take care not to drop or knock the lens. Also take care not to put a lot of pressure on the lens.
???Take care not to drop the bag that you inserted the lens in as it may damage the lens. The camera may stop operating normally and pictures may no longer be recorded.
When using pesticides and other volatile substances around the camera make sure that they do not get onto the lens.
???If such substances get onto the lens they can damage the exterior case or cause the paint to peel.
Do not carry the unit when it is still attached to the camera body.
???Under no circumstances should the unit be stored in any of the following locations since doing so may cause problems in operation or malfunctioning.
???In direct sunlight or on a beach in summer
???In locations with high temperatures and humidity levels or where the changes in temperature and humidity are acute
9
VQT3N27
???In locations with high concentrations of sand, dust or dirt
???Where there is fire
???Near heaters, air conditioners or humidifiers
???Where water may make the unit wet
???Where there is vibration
???Inside a vehicle
???Refer also to the operating instructions of the digital camera.
???When the unit is not going to be used for a prolonged period, we recommend storing with a desiccant (silica gel). Failure to do so may result in performance failure caused by mold, etc. It is recommended that you check the unit???s operation prior to use.
???Do not leave the lens in contact with rubber or plastic products for extended periods of time.
???Do not touch the lens contact point. Doing so can cause failure of the unit.
???Do not disassemble or alter the unit.
10
Do not use benzine, thinner, alcohol or other similar cleaning agents to clean the lens glass or exterior cabinet.
???Using solvents can damage the lens or cause the paint to peel.
???Wipe off any dust or fingerprints with a soft, dry cloth.
???Use a dry dust cloth to remove dirt and dust on the focus ring.
???Do not use a household detergent or a chemically treated cloth.
Troubleshooting
A sound is heard when the camera is turned on or off.
A sound is heard from the lens when taking a picture of a bright subject such as when outdoors.
???This is the sound of lens or aperture movement and is not a malfunction.
VQT3N27
Specifications
INTERCHANGEABLE LENS FOR DIGITAL CAMERA ???LEICA DG SUMMILUX 25 mm/F1.4 ASPH.???
11
VQT3N27
Limited Warranty
FOR U.S.A. and Puerto Rico
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way,
Secaucus, New Jersey 07094
Digital Still Camera ACCESSORIES LIMITED WARRANTY
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as ???the warrantor???) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (???warranty period???), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.
You must
For assistance in obtaining service in the United States and Puerto Rico please contact: Panasonic Camera and Digital Service Center
1590 Touhy Ave.
Elk Grove Village, IL 60007
12
VQT3N27
If repair is needed during the warranty period the purchaser will be required to furnish a sales receipt/proof of purchase indicating date of purchase.
Also, purchaser will be responsible for shipping the unit to the above address.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation,
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER ???LIMITED WARRANTY
COVERAGE???. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, or loss of, or fail- ure to obtain, images, data or other camera memory content. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have others rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor???s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR
RESPONSIBILITY.
13
VQT3N27
FOR CANADA
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT ??? LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold ???as is???, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER
PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED
14
VQT3N27
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation,
Dry cell batteries, printer ink cartridge and paper are also excluded from coverage under this warranty. Rechargeable batteries are warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN
NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
For defective product exchange within the warranty period, please contact the original Dealer or our Customer Care Centre.
15
VQT3N27
Informaci??n sobre la eliminaci??n en otros pa??ses no pertenecientes a la Uni??n Europea
Este s??mbolo s??lo es v??lido en la Uni??n Europea.
Si desea desechar este producto, p??ngase en contacto con las autoridades locales o con su distribuidor para que le informen sobre el m??todo correcto de eliminaci??n.
16
LO SIGUIENTE S??LO INTERESA A CANAD??.
Este aparato digital de la clase B cumple con
Informaci??n para su seguridad
Mantenga la unidad lo m??s lejos que sea posible de equipos electromagn??ticos (como hornos de microondas, televisores, v??deo juegos, trasmisores radio, l??neas de alto voltaje, etc.).
???No utilice la c??mara cerca de tel??fonos m??viles, ya que lo de hacerlo puede producir ruido que afectar?? negativamente a las im??genes y el sonido.
???Si la c??mara queda afectada negativamente por un equipo electromagn??tico y deja de funcionar correctamente, apague la c??mara y quite la bater??a y/o el adaptador de CA conectado. Luego vuelva a insertar la bater??a y/o vuelva a conectar el adaptador de CA y encienda la c??mara.
VQT3N27
El objetivo puede usarse con una c??mara digital compatible con el est??ndar de montaje de objetivos del ???Micro Four ThirdsTM System???.
???No se puede montar en una c??mara con est??ndar de soporte Four ThirdsTM.
???Las figuras de la c??mara digital en estas instrucciones de funcionamiento muestran la
???E aspecto y las especificaciones de los productos descritos en este manual pueden diferir de los productos reales que usted ha comprado debido a aumentos sucesivos.
???El logotipo Micro Four Thirds??? y Micro Four Thirds son marcas comerciales o marcas comerciales registradas de Olympus Imaging Corporation, en Jap??n, Estados Unidos, la Uni??n Europea y otros pa??ses.
???El logotipo Four Thirds??? y Four Thirds son marcas comerciales o marcas comerciales registradas de Olympus Imaging Corporation, en Jap??n, Estados Unidos, la Uni??n Europea y otros pa??ses.
???G MICRO SYSTEM es un sistema de c??mara digital con objetivo intercambiable de LUMIX basado en el est??ndar Micro Four Thirds System.
ESPA??OL
???LEICA es una marca registrada de Leica Microsystems IR GmbH. SUMMILUX es una marca registrada de Leica Camera AG. Los objetivos LEICA DG se fabrican usando instrumentos de medida y sistemas de garant??a de calidad certificados por Leica Camera AG en base a los est??ndares de calidad de la compa????a.
???Los nombres de los sistemas y productos que se mencionan en estas instrucciones generalmente son marcas comerciales registradas o marcas comerciales de los fabricantes que desarrollaron el sistema o producto en cuesti??n.
17
VQT3N27
LO SIGUIENTE S??LO SE APLICA EN LOS EE. UU.
Notas FCC:
Se ensay?? este equipo y se comprob?? que est?? de conformidad con los l??mites de un dispositivo digital de la clase B, de acuerdo con la Parte 15 de las Reglas FCC.
Estos l??mites se han ideado para proporcionar una razonable protecci??n contra las interferencias da??inas en una instalaci??n residencial. Este equipo genera, utiliza y puede radiar energ??a de frecuencia radio y, por si no se instala y se utiliza de acuerdo con las instrucciones, puede ocasionar interferencia da??ina a las comunicaciones radio. Aunque no hay garant??a de que no pueda tener lugar interferencia en especiales instalaciones. Si este equipo causa interferencia a la recepci??n de radio o televisi??n que pueden determinarse apagando y encendiendo el equipo, se anima al usuario intentar corregir la interferencia tomando una de las medidas a continuaci??n:
???Vuelva a orientar o a colocar la antena receptora.
???Aumente la separaci??n entre el equipo y el receptor.
???Conecte el equipo a una toma de un circuito diferente del que est?? conectado el receptor.
???Llame al concesionario o un t??cnico experto de radio y televisi??n para ayuda.
Todo cambio o modificaci??n a este equipo sin autorizar invalidar?? el t??tulo del usuario para hacer funcionar este dispositivo.
Este dispositivo cumple con la Parte 15 de las Reglas FCC. El funcionamiento est?? sujeto a las dos condiciones a continuaci??n: (1) Este dispositivo podr??a no causar interferencia da??ina y (2) este dispositivo tiene que aceptar toda la interferencia recibida, incluyendo la que puede causar un funcionamiento no deseado.
Parte responsable:
Panasonic Corporation of North America One Panasonic Way
Secaucus, NJ 07094
Contacto de asistencia:
Panasonic Consumer Electronics Company Tel??fono:
18
VQT3N27
Prevenci??n contra las aver??as
???Atenci??n del objetivo
???La arena y el polvo pueden da??ar el objetivo. Cuando usa el objetivo en una playa, tenga cuidado de que ni arena ni polvo entren en el interior del objetivo o los terminales, etc.
???Este objetivo no es impermeable. Si caen gotas de agua en el objetivo, l??mpielo con un pa??o seco.
???No ejerce demasiada presi??n en el objetivo.
???Cuando hay suciedad (agua, aceite, huellas dactilares, etc.) en la superficie del objetivo, la imagen puede salir afectada. Limpie ligeramente con un pa??o blando y seco antes y despu??s de tomar las im??genes.
???No meta el soporte del objetivo mirando hacia abajo. No deje que se ensucien los punto de contacto 1.
???Acerca de la condensaci??n (Empa??amiento del objetivo)
???La condensaci??n ocurre cuando se encuentra una diferencia en la temperatura y humedad como se describe abajo. La condensaci??n puede hacer ensuciar el objetivo y producir hongos y un funcionamiento defectuoso, por lo tanto ponga cuidado en las situaciones a continuaci??n:
???Cuando lleva la c??mara en casa desde el aire libre durante un tiempo fr??o
???Cuando lleva la c??mara dentro de un coche con aire acondicionado
???Cuando sopla en el objetivo aire fr??o desde un acondicionador de aire
???En lugares h??medos
???Para impedir la condensaci??n, meta la c??mara en una bolsa de pl??stico para que se aclimate a la temperatura ambiente. Si ocurre condensaci??n, apague la alimentaci??n y la deje as?? durante dos horas. Una vez de que la c??mara se haya aclimatado a la temperatura ambiente en empa??amiento desaparece naturalmente.
19
VQT3N27
Accesorios suministrados
[Controles a realizar cuando va a desembalar la unidad]
Al quitar la unidad de su embalaje, compruebe que se encuentren la unidad principal y los accesorios suministrados. Adem??s compruebe el aspecto externo y las funciones para verificar que no hayan padecidos da??os durante la distribuci??n y el transporte.
Por si encuentra un cualquier problema, antes de usar el producto llame a su comerciante.
Los n??meros de producto se aplican desde julio de 2011. Estos pueden estar sujetos a modificaciones.
VFC4456 VYC1063 VYF3284 VFC4605
1Bolsa de almacenamiento del objetivo
2Visera del objetivo
3Tapa del objetivo
4Tapa trasera del objetivo
(La tapa trasera del objetivo y la tapa del objetivo intercambiable al momento de la compra.)
20
Unir y quitar el objetivo
???Se refiera tambi??n a las instrucciones de funcionamiento de la c??mara para unir y separar el objetivo.
???Uni??n del objetivo
??? Compruebe que la c??mara est?? apagada.
1 Gire la tapa trasera del objetivo para separarla.
A: Tapa trasera del objetivo ??????
???
???
???
2 Alinee las marcas para ajustar el objetivo B
???No presione el bot??n de liberaci??n de la lente C cuando coloca una lente.
???Como el soporte del objetivo podr??a salir rayado, no trate de unir el objetivo a la c??mara manteni??ndolo de ??ngulo.
???Compruebe que el objetivo est?? unido correctamente.
VQT3N27
???Separaci??n del objetivo
??? Compruebe que la c??mara est?? apagada.
???Una la tapa del cuerpo a la c??mara para que ni suciedad ni polvo entren dentro de la unidad principal.
???Unir y separar la tapa del objetivo
Apriete la tapa de la lente como se muestra en la figura para colocarla o sacarla.
??? Ponga cuidado en no perder la tapa del objetivo.
???Uni??n de la visera del objetivo (Accesorio suministrado)
Inserte la visera del objetivo con las partes cortas arriba y abajo, luego g??rela en la direcci??n de la flecha hasta que dispare.
E: Ajustando hacia la marca
???Cuando toma las im??genes con el flash y tiene unida la visera del objetivo, la porci??n inferior de la pantalla podr??a ponerse oscura (efecto de vi??eteado) y el control del flash podr??a inhabilitarse debido a que ??ste podr??a ser oscurecido por la misma visera. Le recomendamos que quite dicha visera.
???Cuando usa la l??mpara de ayuda AF en la oscuridad, quite la visera del objetivo.
21
VQT3N27
???Uni??n de los filtros
???Puede tener lugar vi??eteado si usa 2 o m??s protectores MC (opcionales:
filtros ND (opcionales:
???Tal vez sea imposible de retirar el filtro si est?? demasiado apretado, por lo que no debe apretarlo demasiado fuerte.
???Se puede colocar la tapa del objetivo con el filtro ya colocado.
???No consigue acoplar un objetivo de conversi??n o adaptador a este objetivo. Puede usarse un filtro, pero acoplar cualquier otro elemento puede da??ar el objetivo.
22
Nombres y funciones de los componentes
4
1Superficie del objetivo
2Anillo del enfoque
Ruotare per mettere a fuoco quando si scattano fotografie utilizzando la messa a fuoco manuale.
3Punto de contacto
4Marca para ajustar el objetivo
VQT3N27
Nota
???El cambio en la imagen con la operaci??n de enfoque puede ser m??s visible seg??n la condici??n de grabaci??n cuando la funci??n AF opera durante la grabaci??n de im??genes en movimiento. Se recomienda fijar el enfoque al ajustar la c??mara en el enfoque manual (MF), etc. cuando el cambio de imagen lo molesta.
Precauciones para el uso
Tenga cuidado de no hacer caer el objetivo ni le choque contra. Asimismo tenga cuidado de no presionarlo demasiado.
???Tenga cuidado de no hacer caer la bolsa en la que cabe el objetivo. ??ste podr??a da??arse, la c??mara podr??a dejar de funcionar normalmente y las im??genes ya podr??an no grabarse.
Cuando usa pesticidas y otras substancias vol??tiles alrededor de la c??mara tenga cuidado de que no entre en el objetivo.
???Si dichas substancias caen en el objetivo, ??stas pueden da??arlo o hacer desconchar su barniz.
No transporte la unidad si ??sta est?? todav??a unida al cuerpo de la c??mara.
???De ninguna manera la unidad debe ser usada o almacenada en uno de los siguientes lugares ya que lo de hacerlo podr??a perjudicarla o producir un funcionamiento defectuoso.
???Bajo la luz directa del sol o bien a lo largo de la costa durante el verano
23
VQT3N27
???En lugares donde haya altas temperaturas o altos niveles de humedad o bien donde sean repentinos los cambios de temperatura y humedad
???En lugares donde haya altas concentraciones de arena, polvo o suciedad
???Donde haya llamas
???Cerca de calefactores, acondicionadores de aire o humedecedores
???Donde el agua puede hacer mojar la unidad
???Donde haya vibraciones
???Dentro de un veh??culo
???Se refiera tambi??n a las instrucciones de funcionamiento de la c??mara digital.
???Cuando no ha de ser usada la unidad por un per??odo prolongado, le recomendamos guardar con un desecante (silicagel). El hecho de no hacerlo podr??a ocasionar una aver??a causada por el moho etc. Se recomienda que compruebe el funcionamiento de la unidad antes de usarla.
???No deje el objetivo en contacto con productos de pl??stico durante largos per??odos de tiempo.
???No toque los contactos el??ctricos de la unidad. Lo de hacerlo puede causar aver??a en la unidad.
???No desmonte ni modifique la unidad.
24
No utilice gasolina, diluyente, alcohol u otros agentes de limpieza parecidos para limpiar la unidad.
???El hecho de usar disolventes puede da??ar el objetivo y hacer desconchar su barniz.
???Quite cualquier indicio de polvo o huellas dactilares con un pa??o blando y seco.
???Use un pa??o suave y seco para eliminar suciedad y polvo de la anilla de enfoque.
???No use detergentes para cocina o un pa??o tratado qu??micamente.
B??squeda de aver??as
Se oye un sonido cuando se enciende o se apaga la c??mara.
Se escucha un sonido desde la lente al tomar la imagen de un sujeto brillante como en exteriores.
?????ste es el sonido del objetivo o el movimiento de abertura y no es un funcionamiento defectuoso.
VQT3N27
Especificaciones
??PTICA INTERCAMBIABLE PARA C??MARA DIGITAL ???LEICA DG SUMMILUX 25 mm/F1.4 ASPH.???
25
VQT3N27
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
??? Panasonic Corporation 2011
P
Printed in Japan