Menu

Menu list

Menu figures and illustrations are provided for easy-to-understand explanations, and so they are different from the actual menu indications.

?? [TAPE RECORDING MENU]

1)[BASIC] [SCENE MODE] -23- [REC SPEED] -19-

[BLANK SEARCH] -19- [WIND CUT] -22- [CLOCK SET] -15-

2)[ADVANCE]

[EIS] -23- [CINEMA] -23- [D.ZOOM] -20- [ZOOM MIC] -20- [MIC LEVEL] -20- [DATE/TIME] -32- [INITIAL SET] -32-

3)[SETUP] [FADE COLOR] -22- [AUDIO REC] -32- [REC LAMP] -32- [DISPLAY] -32- [REMOTE] -17- [BEEP SOUND] -32- [LCD SET] -15- [EVF SET] -15- [POWER SAVE] -32-

4)[LANGUAGE] -14-

?? [TAPE PLAYBACK MENU]

1)[BASIC] [DATE/TIME] -32-

2)[ADVANCE] [BLANK SEARCH] -19- [REC SPEED] -19- [REC STDBY] -29- [REC DATA] -32- [REPEAT PLAY] -26- [MIC LEVEL] -20-

3)[SETUP]

[12bit AUDIO] -30- [AUDIO OUT] -32- [DISPLAY] -32- [REMOTE] -17- [LCD SET] -15- [EVF SET] -15- [POWER SAVE] -32-

4) [LANGUAGE] -14-

Menus related to taking pictures

?? [DATE/TIME]

This switches between date and time indications.

???The camera-recorder automatically records the date and time of picture taking on the tape.

???You can also show or change the date/time indication by repeatedly pressing the [DATE/TIME] button on the remote control.

??

Switches the audio (PCM audio) recording systems. [12bit]: Records audio in ???12 bit 32 kHz 4 tracks???.

(The original audio signals can be kept after the other audio signals are dubbed.)

[16bit]: Records audio in ???16 bit 48 kHz 2 tracks???. Audio can be recorded in higher quality.

(If audio signals are dubbed, then the original audio signals will be erased.)

?? [REC LAMP]

Set to [ON] and this turns the recording lamp on during recording, which indicates that recording is underway. Set to [OFF] and this does not turn on the lamp even when recording is underway.

?? [DISPLAY]

Set to [ON] and the display mode can be switched to all functions. Set to [OFF] and it can be switched to minimum display.

?? [BEEP SOUND]

Set to [ON] and confirmation/alarm beeps are issued as follows.

1 Beep

???When you start recording ???When you turn on the power 2 Beeps

???When you pause recording 2 Beeps for 4 times

???When a cassette with its erasure prevention tab set to [SAVE] is inserted, condensation occurs, and at other times. Check the sentence displayed on the screen.

?? [POWER SAVE]

[OFF]: When about 5 minutes passed without any operation, the standby mode automatically will be set. In the standby mode, [;] blinks and it takes time more than usual to start recording after you press the recording start/stop button.

[5 MINUTES]: When about 5 minutes passes without any operation, the camera-recorder automatically turns off to protect the tape or to prevent the battery from running down. When you use the camera-recorder, turn it on again.

???In the following cases, the power may not turn off even when set [POWER SAVE] >> [5 MINUTES].

???When connecting to the AC outlet (When using the AC adapter)

???When connecting the DV cable to other equipment

Menus related to playback

?? [REC DATA]

Set to [ON] and the settings (shutter speed, iris/gain values, and white balance settings (-24-), etc.) used during the recordings are displayed during playback.

???When the [AUTO/MANUAL/FOCUS] switch is set to [AUTO], the indication [AUTO] will appear.

???When there is no data, [---] appears on the display.

???If the camera-recorder data of the camera-recorder are played back on other equipment, the settings information is sometimes not displayed normally.

?? [AUDIO OUT]

This switches the sound to be played back. [STEREO]: Stereo sound (main sound and sub sound)

Other menus

?? [INITIAL SET]

When there is a menu that cannot be selected depending on a combination of functions, set to [YES] for changing the menu settings back to the initial shipping condition.

(Language setting cannot be back to the initial shipping condition.)