Motorola

iDEN

Digital Multi-service Data-capable Phone

i860 Phone User???s Guide

@NNTN5565A@

NNTN5565A

IMPORTANT NOTICE: PLEASE READ

PRIOR TO USING YOUR PHONE

The SIM card provided in this kit is intended for use with the phone provided in this package.

Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58sr, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series.

For more information on SIM card compatibility, go to www.motorola.com/iden/support.

Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage. Please refer to the text of Motorola's Limited One Year warranty located in this user???s guide for complete details.

i

ii

iii

iv

v

DECLARATION OF CONFORMITY

Per FCC CFR 47 Part 2 Section 2.1077(a)

Responsible Party Name: Motorola, Inc.

Address: 8000 West Sunrise Boulevard

Plantation, FL 33322 USA

Phone Number: 1 (800) 453-0920

Hereby declares that the product:

Product Name: i860

Model Number: H73XAN6RR4AN

Conforms to the following regulations:

FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)

Class B Digital Device

As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and receiver.

???Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

???Consult the dealer or an experienced radio/TV technician for help.

x

Getting Started

camera lens

volume controls

Push-To-Talk (PTT) button

audio jack

accessory connector

retractable antenna

flip open button

light sensor

camera short-range spotlight

1

Getting Started

p Power button.

Navigation key ??? press the arrows to scroll through menus and lists.

OOK key ??? selects highlighted item; answers calls.

mMenu key ??? accesses context-sensitive menus.

AOption key ??? selects the option appearing above it on the display.

s Send key ??? places phone calls.

eEnd key ??? ends phone calls; returns to idle screen.

tActs like swhen the flip is closed; turns speaker on; used with voice names and voice records.

. Acts like e when the flip is closed; accesses recent calls; sends incoming calls to voice mail.

To start using your i860 phone:

???Make sure your SIM card is in place.

???Charge the battery.

???Activate your service.

???Enable over-the-air security if you are prompted to.

2

Locating Your SIM Card

Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery.

SIM card

If your SIM card is not in the SIM card holder, it may be in the box your phone came in, attached to a piece of plastic about the size of a credit card. If this is the case, carefully detach your SIM card from the surrounding plastic and insert it as described in ???Inserting Your SIM Card??? on page 14.

If there is no SIM card in your phone or the box, contact your service provider.

Locating Your SIM Card

Battery

Removing the Battery Door

1Make sure the phone is powered off.

2Slide the release button back until it releases the battery door.

release button

3Allow the battery door to pop up, slide it forward, and remove it from the back of your phone.

3

Getting Started

1Remove the battery door.

2Insert the top of the battery into the battery area. Press the bottom of the battery to secure it.

3Replace the battery door and press it gently until you hear a click.

Charging the Battery

Your phone comes with a battery charger.

1 Plug the charger into an electrical outlet.

connector cover

3Plug the other end of the charger into the accessory connector.

Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out.

4

4When charging the battery for the first time, charge for 30 minutes longer than the time shown in ???Charging Times???.

Charging Times

Check your battery and charger type against the grid below to determine appropriate charging times.

For best results, charge the batteries within the temperature range of 50??F to 104??F (10??C to 40??C).

Prolonged charging is not recommended.

Battery

Removing the Battery

1With your phone powered off, remove the battery door.

2Remove the battery by pushing it toward the antenna and lifting it out.

Battery Use and Maintenance

???The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium Ion battery or may yield a reduced number of lifetime charge cycles.

???Extreme temperatures degrade battery performance. Do not store the battery where temperatures exceed 140??F (60??C) or fall below 4??F (-20??C).

5

Getting Started

???Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day.

???The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity.

Activating Service

The first time you power your phone on, you must be in your local calling area. This activates your service.

Powering On and Off

The first time you power your phone on, a screen may appear asking you to update your browser information. This means you must enable security.

To power your phone on:

1Open the flip.

Tip: Press the flip open button to open the flip easily.

2Press p.

To power your phone off:

1Open the flip.

2Press and hold p.

When You Power On For the First

Time

If the Enter SIM PIN Code screen appears, enter your SIM PIN. See ???Entering the PIN??? on page 12. Press Aunder Ok.

When you receive your phone, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see ???Changing the PIN??? on page 12).

As your phone connects to the network, you will see a welcome message and a connecting message. When the idle screen appears, the phone is ready to use.

6

Enabling Over-the-Air

Security

If you are set up to receive over-the-air programming from your service provider, you must enable security the first time you power on your phone or within 20 days of first activation of your phone:

1When you power on your phone for the first time, after the idle screen appears, you will be prompted to select Ok to update your browser information.

Note: If you press A under Later, you will be prompted to enable security each time you power on your phone until you press

A under Ok.

2Press A under Ok.

3You are prompted to enable security. Press A under Yes. A series of screens appears. If you subscribe to your service provider???s plan, your home page appears.

4Press e to return to the idle screen.

Phone Programming

Within 24 hours of enabling security, you may receive an alert notification containing your Private ID and Talkgroup lists for Private calls.

Enabling Over-the-Air Security

To accept programming:

1When you receive an alert notification saying

New Browser Message - Receive Programming Info, press O or press Aunder

Goto.

2You are prompted to accept changes to your lists. Press Oor press A under Ok.

3If you are prompted again to accept changes to your lists, press O or press Aunder Ok.

4A confirmation screen displays. Press Oor press Aunder Ok.

5Press e to return to the idle screen.

Finding Your Phone Number

and Private ID

My Info lets you view your phone number, Private ID, and other phone information:

1Press mto access the main menu.

2Scroll to My Info.

3Press O.

4Scroll to see your information.

Line 1 and Line 2 are your phone numbers. Private is your Private ID, the number that others use to contact you using Private service. These numbers appear when you receive your alert notification after enabling security on your phone.

7

Getting Started

See ???My Info??? on page 79 for more information about this feature.

Phone Basics

Display

Any time your phone is powered on, the display provides you with information and options.

The external display shows a shortened version of the internal display. To see more information, open the flip.

status icons

text area

menu icon

display options

The screen shown is the idle screen. The text that appears on your idle screen depends on your service provider. The idle screen appears when your phone is on, but not engaged in any activity.

Text Area

This area displays menus, messages, names, phone numbers, and other information.

Display Options

Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it.

Menus and Lists

Your phone???s features are arranged in menus, submenus, and lists.

To access the items in a menu or list, scroll using the navigation key at the top of your keypad. This key lets you scroll up, down, left, or right. Holding down the appropriate part of the navigation key speeds up scrolling.

In this guide, this symbol > tells you to select a menu or list item. For example, Settings > Security means:

1Scroll to Settings on the main menu.

2Press O to see the Settings screen.

8

3Scroll to Security.

4Press O to see the Security screen.

OK Key

Pressing O:

???Selects the highlighted menu item or list item

???Sets options

???Confirms actions

???Places and answer calls

Menu Key

Many features provide context-sensitive menus that let you access related features and actions. This icon S appears any time a context-sensitive menu is available. Press mto access the menu.

Main Menu

All your phone???s features can be accessed through the main menu. You can set the main menu to appear as a list or as large icons.

b Settings

m Ring Tones

C Camera

m Media Center

c VoiceRecord

j My Info

l GPS

dContacts

eMessages

fCall Forward

Phone Basics

Customize your phone. See page 105.

Assign ring tones and turn ringer off. See page 50.

Take pictures and videos. See page 63.

Access stored pictures, videos, and audio recordings. See page 68.

Record and play audio messages. See page 81.

Access personal phone information, including phone number and Private ID. See page 79.

Find your approximate geographical location. See page 90.

View, store, edit contacts. See page 29.

Access messages. See page 55.

Set call forwarding options. See page 38.

9

Getting Started

o Datebook

gMemo

hCall Timers

iRecent Calls

s Shortcuts

p Profiles

k Call Alert

Schedule appointments. See page 99.

Store a number to access later. See page 49.

Phone usage information. See page 45.

Lists recent calls. See page 24.

Create shortcuts to screens. See page 117.

Groups of settings you apply together. See page 112.

Lists call alerts. See page 22.

Status Icons

Status icons appear at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features.

abcd Battery Strength ??? A fuller battery efgd indicates a greater charge.

o p q r Signal Strength ??? More bars next

sto the antenna indicate a stronger signal.

Quick Access to Main Menu Items

Each arrow in the navigation key and O can be used to access a main menu item from the idle screen. Each of these keys is assigned to a main menu item when you receive your phone. To assign different main menu items, see ???Personalize Features??? on page 109.

10

Q R M

u

w xT yz

DE

c

U

Y Z

Ringer Off ??? Your phone is set not to ring. See page 50.

Speaker Off ??? Sounds associated with Private calls and group calls are set to come through the earpiece rather than through the speaker.

Messages ??? You have one or more messages. See page 55.

Internet ??? You are ready to browse the internet.

Voice Record ??? You have one or more voice records stored. See page 81.

Airplane Mode ??? Your phone is set to airplane mode. See

page 108.

Packet Data ??? You are ready to transfer packet data or are transferring packet data. See page 45.

tRoaming ??? You are using your phone outside your carrier's network.

Entering Numbers From the Keypad

To enter numbers at the idle screen or any screen that requires you to enter numbers, press the numbers on the keypad.

If you make a mistake:

???To clear a digit, press Aunder Delete.

???To clear all digits, press and hold Aunder

Delete.

???To insert or delete a digit anywhere in the string of digits you have entered, scroll left or right.

???To cancel, press e.

SIM Card Security

Your SIM card protects your personal information. The SIM card stores all your Contacts information. Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card.

11

Getting Started

Note: Except for making emergency calls, your phone will not function without the SIM card.

To prevent unauthorized use of your phone, your SIM card may be protected by a PIN that you enter each time the phone is powered on. You can change the PIN or turn off the requirement that it be entered.

Entering the PIN

You may be required to enter a SIM PIN when you first use your phone.

When you receive your phone, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card.

Important: If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact your service provider. See ???Unblocking the PIN??? on page 13.

1When the Enter SIM PIN Code screen appears, enter your SIM PIN. An asterisk appears for each character entered.

2Press A under Ok.

Changing the PIN

1From the main menu, select Settings > Security > Change Password > SIM PIN.

2At the Enter Old SIM PIN screen, enter the current SIM PIN.

3Press A under Ok.

4At the Enter New SIM PIN screen, enter the new 4- to 8-digit SIM PIN.

5Press A under Ok.

6At the Re-enter New SIM PIN screen, re-enter the new SIM PIN to confirm.

7Press A under Ok.

Turning the PIN Requirement On and

Off

When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone.

Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls.

When the PIN requirement is off, your phone can be used without entering a PIN.

12

Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected. Anyone can use your phone and access your personal data.

1From the main menu, select Settings > Security > SIM PIN.

2Select On or Off.

3Enter the current SIM PIN.

4Press A under Ok.

Unblocking the PIN

If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact your service provider to get a PIN Unblock Code (PUK).

Important: If you unsuccessfully enter the PUK code 10 times, your SIM card is permanently blocked and must be replaced. If this happens, all data is lost. You will get a message to contact your service provider. Except for making emergency calls, your phone will not function with a blocked SIM card.

SIM Card Security

To unblock the PIN:

1Press * # m 1.

2At your service provider representative???s request, provide the information needed to give you a PUK code.

3Select Unblock PIN.

4Enter the PUK code.

5Enter a new 4- to 8-digit SIM PIN.

6Re-enter your SIM PIN.

If you entered the codes properly, SIM Unlocked appears on the display.

Inserting and Removing Your SIM

Card

Important: Do not touch the gold-colored areas of your SIM card.

Switching SIM Cards

Moving your SIM card from one phone to another moves all your Contacts information, but erases other information. If you remove your SIM card and use it with another phone, or use another SIM card with your phone, the following information is erased:

???The recent calls list

???Call forwarding settings

13

Getting Started

???Net alerts

???MOSMS drafts, outbox messages, and customized quick notes

???Pictures, videos, and audio recordings in the media center, except those that are forward locked

???Voice records

???Voice names

???Datebook events

???Options set using the Personalize menu

???Information stored in Memo

???3 most recent GPS Enabled locations

Inserting Your SIM Card

1With your phone powered off, remove the battery door and battery.

2Slide the latch away from the SIM card holder.

latch

3 Open the SIM card holder.

4Carefully slide your SIM card into the SIM card holder.

14

SIM Card Security

latch

6 Slide the latch toward the SIM card holder.

Removing Your SIM Card

Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary.

1With your phone powered off, remove the battery door and battery. See ???Removing the Battery??? on page 5.

3 Open the SIM card holder.

15

Getting Started

4Carefully slide your SIM card out of the SIM card holder.

5 Close the SIM card holder.

6Slide the latch toward the SIM card holder.

Note: Protect your SIM card as you would any delicate object. Store it carefully.

Accessories

To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer.

For More Information

If you have questions about your i860 phone, contact your sales representative or your service provider.

16

Making Calls

Your i860 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie.

Phone Calls

With the Flip Open

1Enter the number you want to call.

2To place the call: Press s. -or-

If you entered the number from the idle screen, press O.

3To end the call:

Press e. -or-

Close the flip.

To end a call by closing the flip, you must have the Flip to End feature turned on (see ???Setting Flip Actions??? on page 43).

With the Flip Closed

You can make phone calls with the flip closed using a voice name or the recent calls list to select the number you want to call. See ???Using a Voice Name??? on page 19 and ???Making Calls From the Recent Calls List??? on page 27.

To end the call, press ..

Private Calls

1If the flip is open, enter the Private ID you want to call. -or-

If the flip is closed, choose the number as you would when making a phone call.

2Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.

3Release the PTT button to listen.

4To end the call:

If the flip is closed, press .. -or-

Press e. -or-

Press A under Exit. -or-

Close the flip.

A Private call ends automatically if there is no activity on the call for a few seconds.

17

Making Calls

Tip: To let someone know you want to talk to him or her on a Private call, send a call alert. See ???Call Alerts??? on page 22.

Receiving Calls

Phone Calls

When you receive a phone call, your phone rings, vibrates, or lights up its backlight.

Answering

If the flip is closed, press t. -or-

Open the flip. -or-

Press s. -or-

Press O. -or-

Press A under Yes. -or-

Press any number key.

To answer a call by opening the flip, you must have the Flip to Ans feature turned on (see ???Setting Flip Actions??? on page 43). To answer a call by pressing any number key, you must have the Any Key Ans feature turned on (see ???Phone Calls Features??? on page 108).

Sending to Voice Mail

If the flip is closed, press .. -or-

Press e. -or-

Press A under No.

Ending

If the flip is closed, press .. -or-

Press e. -or-

Close the flip.

Private Calls

When you receive a Private call, your phone emits a chirping sound or vibrates.

Answering

1Wait for the caller to finish speaking.

2Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.

3Release the PTT button to listen.

Ending

If the flip is closed, press .. -or-

Press e. -or-

Press A under Exit. -or-

Close the flip.

A Private call ends automatically if there is no activity on the call for a few seconds.

18

Choosing a Number to Call

You can choose the number you want to call in many ways:

???Enter the number on the keypad. See ???Entering Numbers From the Keypad??? on page 11.

???Say a voice name into your phone. See ???Using a Voice Name???.

???Use Speed Dial or Turbo Dial?? to make a phone call. See ???Using Speed Dial and Turbo Dial????? on page 20.

???Redial the last phone number called. See ???Redialing the Last Number??? on page 20.

???Select the number from the recent calls list. See ???Making Calls From the Recent Calls List??? on page 27.

???Select the number from Contacts. See ???Making Calls From Contacts??? on page 36.

???Select a number stored in Datebook. See ???Making Calls From Datebook??? on page 103.

???Use One Touch PTT to make a Private call. See ???One Touch PTT??? on page 42.

???Use the number in Memo. See ???Memo??? on page 49.

Choosing a Number to Call

???Select the number in a text message you have received. See ???Receiving a Message??? on page 58.

Using a Voice Name

If you have created a voice name in Contacts for the number you want to call, say the voice name into your phone to enter the number. See page 30 for information on voice names.

You can use a voice name to enter a number with the flip open or closed.

1Press and hold t until a prompt appears telling you to say the voice name.

2Speaking into the microphone, say the voice name assigned to the number you want to call.

Your phone plays the name back to you.

If you are making a phone call, the call is placed automatically.

Tip: To stop a phone call from being completed, press . if the flip is closed or press e.

If you are making a Private call, press and hold the PTT button to place the call.

19

Making Calls

Using Speed Dial and Turbo Dial??

Each phone number stored in Contacts is assigned a Speed Dial number which you can use to call that number.

Speed Dial

1From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.

2Press #.

3Press s.

Turbo Dial

From the idle screen, press and hold the Speed Dial number (1 through 9) assigned to the phone number you want to call.

Redialing the Last Number

Press and hold s to place a call to the last phone number you called.

Missed Phone Calls

When you miss a call, this icon V and the number of phone calls you have missed appear briefly.

With the Flip Open

If you want to dismiss the missed call message, press Aunder Back. -or-

If you want to view the missed call on the recent calls list, press Aunder View.

With the Flip Closed

If you want to dismiss the missed call message, press ..

If you want to view the missed call on the recent calls list, press .twice.

Using Speakerphone

Turning on speakerphone makes incoming sound come out of the phone???s speaker instead of the earpiece. Speakerphone is available whenever you are on an active phone call.

With the Flip Open

To turn speakerphone on or off:

Press A under Spkr. -or-

Press t.

With the Flip Closed

When you make a call with the flip closed, speakerphone is always on.

20

Opening the flip turns speakerphone off.

Using Mute

Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call.

To turn mute on:

Press A under Mute.

While mute is on, Unmute appears as a display option.

To turn mute off:

Press A under Unmute.

Making Emergency Phone

Calls

Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone.

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.

Using Mute

When you make an emergency call, your phone???s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. See ???GPS Enabled??? on page 90, and particularly ???IMPORTANT: Things to Keep in Mind??? on page 90 and ???Making an Emergency Call??? on page 91, for more information on the limitations of this feature. Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call.

Important: Emergency calls cannot be placed while the keypad is locked.

Important: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.

21

Call Alerts

Sending a call alert lets the recipient know you want to talk to him or her on a Private call.

When you send a call alert, the recipient???s phone emits a series of beeps, or vibrates, and displays your name or Private ID.

The recipient can:

???Answer ??? begin a Private call with the sender

???Queue ??? store the call alert to the call alert queue, which is a list of call alerts

???Clear ??? dismiss and delete the call alert

Sending Call Alerts

1Enter the Private ID you want to send to, as you would when making a Private call.

2Press A under Alert. Ready to Alert appears on the display.

3Press the PTT button until Alert Successful appears on the display.

Note: If the alert is not successful, this may mean the person you are trying to reach is on a call or has the phone turned off.

Receiving Call Alerts

When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do.

To answer a call alert:

Press the PTT button to make a Private call to the sender.

To queue a call alert:

Press A under Queue.

To clear a call alert:

Press O. -or-

Press A under Clear. -or-

If the flip is closed, press ..

Note: The recent calls list also stores call alerts you have received. They appear as Private calls. Call alerts remain in your recent calls list until you delete them or until they reach the end of the list.

Using the Call Alert Queue

When you queue a call alert, it remains in the call alert queue until you make a Private call to the sender or delete it.

22

Viewing Call Alerts

1From the main menu, select Call Alert.

2Scroll through the list.

Viewing Date and Time

To view the date and time a call alert was received:

1From the main menu, select Call Alert.

2Select the call alert you want information on.

Responding to Call Alerts in the Queue

After you queue a call alert, you can respond to it by making a Private call to the sender or sending a call alert to the sender.

Making a Private Call to the Sender

1From the main menu, select Call Alert.

2Scroll to the call alert you want to respond to.

3Press the PTT button to begin the call.

This removes the call alert from the queue.

Sending a Call Alert to the Sender

1From the main menu, select Call Alert.

2Scroll to the call alert you want to respond to.

3Press A under Alert. Ready to Alert appears on the display.

Using the Call Alert Queue

4Press the PTT button until Alert Successful appears on the display.

Deleting Call Alerts

To delete a call alert from the queue:

1From the call alert queue, scroll to the call alert you want to delete.

2Press m.

3Select Delete.

4Press O or press Aunder Yes to confirm.

To delete all call alerts from the queue:

1From the call alert queue, press m.

2From the call alert menu, select Delete All.

3Press O or press Aunder Yes to confirm.

Sorting Call Alerts

Tip: You must have at least one call alert in the queue to access this feature.

To sort call alerts by the order they were received:

1From the main menu, select Call Alert.

2Press m.

3Select Sort By.

4Select First on Top or Last on Top.

23

Recent Calls

The recent calls list stores information associated with calls you have made and received and call alerts you have received. It also stores My Info and contact information sent to you from other phones.

The recent calls list stores up to 20 items.

Calls and Call Alerts

The recent calls list stores the numbers of up to 20 of the most recent calls you have made and received.

If the number of a recent call is stored in Contacts, the following information appears:

???The name assigned to the number

???The picture assigned to the number, if your phone is set to show pictures on the recent calls list. See ???Choosing Picture View or List View??? on page 26.

???The Contacts type icon associated with the number. If the Contacts entry containing the

number has more than one number or address stored, <>surrounds the Contacts type icon. For information on Contacts types, see page 29.

The Private ID Contacts type icon appears when you receive a Private call or call alert, even if the number is not stored in Contacts.

Call alerts you have received appear as Private calls. Like all items in the recent calls list, they remain listed until you delete them or until they reach the end of the list.

For phone calls, an additional icon appears giving information about the call:

X A call you made.

W A call you received.

VA missed call. Missed calls appear on the recent calls list only if you have Caller ID.

When you select a call to view its details, you see information such as the name associated with the call, the number, date, time, and duration of the call.

My Info From Other Phones

The recent calls list stores My Info from other phones. See ???Sending My Info and Contact Information??? on page 76.

24

This icon j appears with My Info from other phones on the recent calls list, along with the Private ID of the person who sent the information.

When you select My Info from other phones to view its details, you see all the information sent.

If you receive My Info from the same phone more than once, only the most recently sent version appears in the recent calls list.

Contact Information From

Other Phones

The recent calls list stores contact information sent from other phones. This information comes from the other phone???s Contacts list or recent calls list. See ???Sending My Info and Contact Information??? on page 76.

This icon d appears with contact information on the recent calls list.

Contact information in the recent calls list displays:

???The name contained in the contact information

???The Contacts type icon associated with the number or address contained in the contact

information. If the item contains more than one number or address stored, <> surrounds the Contacts type icon.

Contact Information From Other Phones

The name or Private ID of the person who sent the contact information appears as a separate item on the recent calls list, above the information sent. If one person sends you more than one item of contact information, all the items appear below the person???s name or Private ID.

When you select contact information to view its details, you see the name or Private ID of the person who sent the information and all the information in the item.

If you receive contact information with the same name from the same phone more than once, only the most recently sent version appears in the recent calls list.

Viewing the Recent Calls List

With the Flip Open

1From the main menu, select Recent Calls.

2Scroll through the list.

To view the details of an item on the list:

From the recent calls list, select the item you want information on.

Tip: To view the details of more items, keep scrolling.

25

Recent Calls

With the Flip Closed

1Press ..

2If you want to view the rest of the recent calls list, press the volume controls.

3Press . to dismiss the recent calls list.

Choosing Picture View or List View

You can set your phone to show the picture associated with each item as you view the recent calls list or show the list without pictures.

1From the recent calls list, press m.

2Select Recent Calls View.

3Select List View to show the recent calls list without pictures. -or-

Select Picture View to show the picture associated with each entry.

Storing Items to Contacts

1From the recent calls list, scroll to or select the item you want to store.

2Press A under Store. -or-

If Store is not one of your options: Press m. Select Store or Update Contacts.

Tip: If the item you want to store is a call, Store does not appear if the number is already stored in Contacts.

3To store the item as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry.

Note: Storing My Info or contact information from another phone to a Contacts entry that has a name assigned to it does not change the name of the Contacts entry.

4If the item you want to store is a call, you must assign a Contacts type to the number:

With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.

5If you want to add more information to the entry, follow the applicable instructions in ???Creating Entries??? on page 30.

6Press A under Save.

Deleting Items

To delete an item from the recent calls list:

1From the recent calls list, scroll to or select the item you want to delete.

26

2Press A under Delete. -or-

If Delete is not one of your options: Press m. Select Delete.

3Press O or press Aunder Yes to confirm. To delete all items on the recent calls list:

1From the recent calls list, press m.

2Select Delete All.

3Press O or press Aunder Yes to confirm.

Making Calls From the Recent

Calls List

With the Flip Open

1From the main menu, select Recent Calls.

2Scroll to the item containing the number you want to call.

???If you scroll to a call, you can make a call to the number that made the call. If the number is stored in Contacts, you can make a call to any of the numbers stored with it.

???If you scroll to My Info from another phone, you can make a call to the Private ID of the phone that sent the information.

???If you scroll to contact information from another phone, you can make a call to any of the numbers in the contact information.

Making Calls From the Recent Calls List

3To place the call now, go to step 4. -or-

Scroll left or right to display the Contacts type for the number you want to call.

4To make a phone call, press s. -or-

To make a Private call, press the PTT button.

You can also make calls while viewing the details of an item on the recent calls list:

1From the recent calls list, select the item containing the number you want to call.

???If you select a call or contact information from another phone, you can make a call to the number shown first on the details screen.

???If you scroll to My Info from another phone, you can make a call to the Private ID of the phone that sent the information.

2To make a phone call, press s. -or-

To make a Private call, press the PTT button.

With the Flip Closed

1Press . to display the most recent call.

2Press the volume controls to scroll to the name or number you want to call.

???If you scroll to a call, you can make a call to the number that made the call.

27

Recent Calls

???If you scroll to My Info from another phone, you can make a call to the Private ID of the phone that sent the information.

???If you scroll to contact information from another phone, you can make a call to the number currently displayed.

3To make a phone call, press ton the top of your phone. -or-

To make a Private call, press the PTT button.

28

Contacts

Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses.

Information stored in Contacts is saved on your SIM card.

A Contacts entry contains:

???A name ??? A name is required if you are storing more than one number or address to the entry; otherwise, it is optional. Typically, this is the name of the person whose contact information is stored in the entry.

???A ring tone ??? This is the sound your phone makes when you receive phone calls or call alerts from any of the numbers stored in the entry. You can assign the ring tone from your list of ring tones. If you do not assign a ring tone, the entry is created with a default ring tone assigned.

???A picture ??? This picture appears on the display when you receive phone calls from any of the phone numbers stored in the entry. You can assign the picture from the pictures stored in the media center. If you do not assign a picture, the entry is created with no picture assigned.

???A Contacts type ??? Each number or address stored must be assigned a Contacts type:

???A number or address ??? Each Contacts entry must contain a number or address. This may be any type of phone number, Private ID, Talkgroup number, email address, or IP address.

29

Contacts

Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See ???Creating Pauses and Waits??? on page 35.

???A Speed Dial number ??? When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.

???A voice name ??? If you create a voice name for a

number, you can then dial that number by saying the voice name into your phone. This icon P appears to the left of the Contacts type icon if a voice name is assigned.

Accessing Contacts

From the main menu, select Contacts. -or-

If you are on a call: Press m. Select Contacts.

Creating Entries

A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details.

After you have entered the number or address, Contacts type, and any other information you want, you can press A under Save to save the entry to Contacts.

To cancel a Contacts entry at any time, press eto return to the idle screen.

To create a Contacts entry:

1To access the entry details screen: Select Contacts > [New Contact]. -or-

From the Contacts list, press m. Select New.

2If you want to assign a name to the entry: Select Name.

Enter the name. See ???Entering Text??? on page 53. When you are finished, press O.

Tip: Press Aunder Browse to select a name already in Contacts.

3If you want to assign a ring tone or picture to the entry, select [Ring Tone/Picture]. See ???Assigning a Ring Tone or Picture??? on page 31.

4To assign a Contacts type to the number or address being stored:

Select the Contacts type field.

Select the Contacts type you want to assign.

5To store a number or address:

Select the # field (or ID for an email address, or IP for an IP address).

30

Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see ???Entering Text??? on page 53.

Tip: Press Aunder Browse to select a number or address from Contacts, the recent calls list, or Memo.

When you are finished, press O.

6If you want to change the default Speed Dial number or a create a voice name for the entry, select [Options]. See ???Assigning a Speed Dial Number or Voice Name???.

7If you want to add more numbers or addresses to the entry:

Scroll past the information you already entered.

Enter the additional information for the entry using step 3 through step 6. You must assign a name to the entry, if you have not already.

8Press A under Done.

Assigning a Ring Tone or Picture

1If you have not already, select [Ring Tone/Picture].

2If you want to assign a ring tone from the list of ring tones:

With Ringer highlighted, scroll left or right to choose a ring tone. -or-

Creating Entries

Select Ringer. Select the ring tone you want to assign.

3If you want to assign a picture from the media center:

Scroll to Picture. Scroll left or right to choose a picture. -or-

Select Picture. Select the picture you want to assign.

Only pictures that can be assigned to Contacts entries are displayed. Some large pictures cannot be assigned.

Tip: If an entry has a picture assigned and you

want the entry to have no picture, select

[No Picture] or press A under Unassign.

4When you are finished, press Aunder Back.

Assigning a Speed Dial Number or Voice Name

1If you have not already, select [Options].

2The default Speed Dial number assigned to a phone number is displayed in the Speed # field. This is always the next available Speed Dial location.

31

Contacts

If you want to assign the phone number to a different Speed Dial location:

With the Speed # field highlighted, press O.

Press A under Delete to delete the current Speed Dial number.

Enter the new Speed Dial number using the keypad.

When you are finished, press O.

3If you want to create a voice name for a phone number, select Voice Name.

As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone.

4When you are finished, press Aunder Back.

Storing Numbers Faster

To store numbers to Contacts from the recent calls list, see ???Storing Items to Contacts??? on page 26.

To store numbers to Contacts from Memo, see ???Memo??? on page 49.

To store numbers to Contacts from the idle screen:

1Use the keypad to enter the number you want to store.

2Press m.

3Select Store Number.

4To store the number as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry.

5With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.

6If you want to add more information to the entry, follow the applicable instructions in ???Creating Entries??? on page 30.

7Press A under Done.

Editing Entries

1From the Contacts list, scroll to or select the entry you want to edit.

2Press A under Edit. -or-

If Edit is not one of your options: Press m. Select

Edit.

The entry details screen displays.

3Follow the applicable instructions in ???Creating Entries??? on page 30 to edit the various fields.

32

Viewing Entries

When you view Contacts entries, you can choose how much detail you want to see.

Viewing the Contacts List

In this view, each entry shows:

???The name assigned to the entry

???A small version of the picture assign to the entry, if you have set Contacts to show pictures in the Contacts list. See ???Choosing Picture View or List View??? on page 34.

???The types of numbers and addresses stored in the entry

To view entries from the Contacts list:

1Access Contacts.

2Scroll to view entries.

Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name.

3If an entry has more than one number or address stored, <>surrounds the Contacts type icon. Scroll left or right to view the icon for each number stored in the entry.

Viewing Entries

Selecting an Entry

In this view, each entry shows:

???The name assigned to the entry

???A small version of the picture assign to the entry

???The name of the ring tone assign to the entry

???The numbers and addresses stored in the entry

To select an entry:

1From the Contacts list, select the entry you want to view.

2Scroll to view the numbers and addresses stored in the entry.

Tip: To select other entries: Scroll left or right. Or, press # or *.

To return to the Contacts list, press Aunder Back.

Viewing More Details

When an entry is selected, you can view more details about the entry by selecting items within the entry.

Viewing Details of a Number or Address

1Select the entry.

2Select the number or address you want to view details of.

33

Contacts

If the you select a phone number, you can view its Speed Dial number and see whether it has a voice name.

To return to the entry, press Aunder Back or press O.

Viewing a Large Picture

To view a large version of the picture assigned to an entry:

1Select the entry.

2Select the first item shown on the entry screen. This item shows the name assigned to the entry or No Name.

Note: You cannot make calls from this view.

To return to the entry, press Aunder Back or press O.

Choosing Picture View or List View

You can set Contacts to show the picture assigned to each entry as you view the Contacts list or show the Contacts list without pictures.

1From the Contacts list, press m.

2Select Contact View.

3Select List View to show the Contacts list without pictures. -or-

Select Picture View to show the picture assigned to each entry.

Searching for a Name

To search for a name in Contacts:

1From the Contacts list, press A under Search.

-or-

If Search is not one of your options: Press m. Select Search.

2Enter the name you want to see. See ???Entering Text??? on page 53.

3Press O.

Your phone finds the name you entered or the nearest match.

Showing Only Private IDs and

Talkgroups

To set Contacts to show only entries that contain Private IDs and Talkgroup entries:

1From the Contacts list, press m.

2Select Filter.

3Set this option to Show Prvt/Grp.

34

To set Contacts to show all entries:

1From the Contacts list, press m.

2Select Filter.

3Set this option to Show All.

Deleting Entries

Delete an Entry

1From the Contacts list, scroll to or select the entry you want to delete.

2Press m.

3To delete the entire entry, select Delete Contact.

4Press O or press Aunder Yes to confirm.

Delete a Number or Address

1From the Contacts list, scroll to the entry that contains the number or address you want to delete.

2Scroll left or right to display the Contacts type for the number you want to delete. -or-

Select the entry. Scroll to or select the number you want to delete.

3Press m.

4Select Delete Number.

5Press O or press Aunder Yes to confirm.

Deleting Entries

Note: If an entry contains only one number or address, deleting the number or address deletes the entry.

Checking Capacity

To see how many numbers are stored in Contacts:

1From the Contacts list, press m.

2Select Capacity.

Creating Pauses and Waits

When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for 3 seconds before dialing further. A wait makes your phone wait for your response before dialing further.

This feature is useful when using voice mail or other automated phone systems that require you to dial a phone number and then enter an access number.

To program a pause:

Press and hold * until the letter P appears. The P represents a 3-second pause.

If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits.

35

Contacts

If you want a pause longer than 3 seconds, press and hold * more than once. Each P represents a 3-second pause.

To program a wait:

Press and hold * until the letter W appears. The W means your phone waits before dialing further.

If you store 17035551235W1234, when you select this number and make a call, your phone dials the first 11 digits and then waits. A message appears asking if you want to send the rest of the digits.

Press Aunder Yes to dial the last 4 digits.

Tip: You can create pauses and waits while dialing a number from the keypad. See ???Creating Pauses and Waits While Dialing??? on page 42.

International Numbers

Note: This feature may not be offered by your service provider.

When storing a number that you plan to use for international calls, use Plus Dialing:

1Press and hold 0 for two seconds. A ???0??? appears, then changes to a ???+???.

Note: The network translates the ???+??? into the appropriate international access code needed to place the call.

2Enter the country code, city code or area code, and phone number.

For information about making international calls, see ???Making International Calls??? on page 42.

Making Calls From Contacts

While Viewing the Contacts List

1Access Contacts.

2Scroll to the name or number you want to call.

Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name.

3To place the call now, go to step 4. -or-

Scroll left or right to display the Contacts type for the number you want to call.

4To make a phone call, press s. -or-

To make a Private call, press the PTT button.

If you are making a Private call, your phone places the call to the Private ID stored in the Contacts entry, even if the Private icon is not displayed.

36

If you are making a phone call:

???Your phone places the call to the phone number assigned to the Contacts type displayed.

???If the Contacts type displayed is not a phone number, your phone places the call to the phone number stored in the Contacts entry.

???If the Contacts type displayed is not a phone number and you have more than one phone number stored in the Contacts entry, your phone prompts you to select the phone number you want to place the call to.

After Selecting an Entry

1Access Contacts.

2Select the Contacts entry that contains the number you want to call.

3Scroll to or select number you want to call.

4To make a phone call, press s. -or-

To make a Private call, press the PTT button.

If you try to make a type of call that does not match the Contacts type of the number you chose, no call is placed.

Accessing Contacts with GSM Phones

Accessing Contacts with GSM Phones

If you plan to use the information stored in Contacts with an i2000, i2000plus, or any other GSM phone, download iDEN Phonebook Manager.

Go to idenphones.motorola.com/iden/support for more information.

You can use iDEN Phonebook Manager to make the Contacts information saved to your i860 phone???s SIM card accessible in this type of phone.

37

Call Forwarding

Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently.

Forwarding All Calls

When you set your phone to forward all calls, an icon appears in the top row of the display:

GPhone line 1 is active; calls to phone line 1 are being forwarded.

IPhone line 1 is active; calls to phone line 2 are being forwarded.

HPhone line 1 is active; calls to phone lines 1 and 2 are being forwarded.

JPhone line 2 is active; calls to phone line 1 are being forwarded.

LPhone line 2 is active; calls to phone line 2 are being forwarded.

KPhone line 2 is active; calls to phone lines 1 and 2 are being forwarded.

To forward all calls:

1From the main menu, select Call Forward > Forward > All Calls.

2Select To.

If you specified a forwarding number for all calls before, this number displays.

To forward calls to this number, press Aunder

Back.

To delete this number, press O, then press and hold A under Delete.

3To enter the number you want to forward calls to: Enter the number using your keypad. -or-

Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

4Press O.

All your calls are now forwarded to the number you specified.

Turning Off Call Forwarding

If you don???t want all your calls forwarded, turn the feature off:

1From the main menu, select Call Forward > To.

2Set this option to Off.

38

All your calls are now sent to your phone.

Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail.

Note: To receive voice mail messages, you must first set up a voice mail account with your service provider.

Forwarding Missed Calls

You can specify a forwarding number for each type of missed call:

???If Busy ??? Your phone is on a call or transferring data.

???If No Answer ??? You do not answer on the first 4 rings.

???If Unreachable ??? Your phone is out of coverage or powered off.

Note: If you want a type of missed call sent to voice mail, the call forwarding number for that type of missed call must be your voice mail access number.

To forward missed calls:

1From the main menu, select Call Forward > Forward > Detailed.

Forwarding Missed Calls

2Select If Busy to specify a forwarding number for calls received when your phone is busy.

3If you specified a forwarding number for this type of call before, this number displays.

To forward calls to this number, press Aunder Back and go to step 6. -or-

To delete this number, press O, then press and hold A under Delete.

4To enter the number you want to forward this type of call to:

Enter the number using your keypad. -or-

Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

5Press O.

6Repeat step 2 through step 5 for If No Answer and If Unreachable.

7When you are finished, press Aunder Back.

Viewing Call Forwarding

Settings

1From the main menu, select Call Forward > Forward > All Calls.

2With To highlighted, press Aunder Status.

39

Advanced Calling

Features

Call Waiting

Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call.

If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call.

To accept the second call and put the active call on hold:

Press A under Yes.

To accept the second call and end the active call:

1Press e.

Your phone rings with the second call.

2Answer the second call.

To decline the second call:

Press A under No. If you subscribe to voice mail, the call is forwarded to your voice mail box, unless you set Call Forward for If Busy to a different number.

Turn Off Call Waiting

To turn off Call Waiting during a call:

1Press m.

2Select In Call Setup > Call Waiting.

3Set this option to Off.

Tip: To turn Call Waiting back on while still on the call, set this option to On.

To turn off Call Waiting for the next call you make or receive:

1From the main menu, select Settings > Phone Calls > Call Waiting.

2Set this option to Off.

Call Waiting is turned back on when you end the call.

Switching Between Calls

Any time you have one call active and one call on hold, to make the call on hold active and put the active call on hold:

Press A under Switch. -or-

If Switch is not one of your options: Press m. Select Switch.

40

Putting a Call on Hold

1While on an active call, press m.

2Select Hold.

If you want to make the call active again, press A under Resume.

Calling 2 People

Putting a Call on Hold, Making a Second Call

1Place or receive a phone call.

2While the call is active, press m.

3Select 2nd Call. This puts the call on hold.

4Enter the second phone number you want to call.

Tip: For quick ways to enter the number, press m.

5Press s to place the call.

To end the second call and make the call on hold active again:

Press e.

To make the call on hold active and put the active call on hold:

Press A under Switch.

Putting a Call on Hold

Making a 3-Way Call

1Place or receive a phone call.

2While the call is active, press m.

3Select 3 Way. This puts the call on hold.

4Enter the second phone number you want to call.

Tip: For quick ways to enter the number, press m.

5Press s to place the call.

6Press A under Join.

All 3 people in the call can speak to and hear each other.

Merging 2 Calls into a 3-Way Call

You can combine 2 phone calls into a 3-way call any time you have a call on hold and a call active:

1Press m.

2Select Join.

All 3 people in the call can speak to and hear each other.

41

Advanced Calling Features

Creating Pauses and Waits

While Dialing

You can enter a pause or wait while dialing a number. For more information on pauses and waits, see ???Creating Pauses and Waits??? on page 35.

To create a pause while dialing a phone number:

1From the keypad, enter the digits you want to occur before the pause.

2Press m.

3Select Insert Pause.

4Enter the digits you want to occur after the pause.

To create a wait while dialing a phone number:

1From the keypad, enter the digits you want to occur before the wait.

2Press m.

3Select Insert Wait.

4Enter the digits you want to occur after the wait.

Making International Calls

Note: This feature may not be offered by your service provider.

Plus Dialing lets you place an international call to most countries without entering the local international access code.

1Press and hold 0 for two seconds. A ???0??? appears, then changes to a ???+???.

Note: The network translates the ???+??? into the appropriate international access code needed to place the call.

2Enter the country code, city code or area code, and phone number.

One Touch PTT

One Touch PTT sets your phone to call the most recent Private ID on the recent calls list, or a Private ID you choose, every time you press the PTT button.

Setting One Touch PTT

To the Most Recent Private ID

1From the main menu, select Settings > 2-Way Radio > One Touch PTT.

2Set this option to Last Call.

42

To the Any Private ID

1From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number.

2To enter the Private ID you want your phone to call every time you press the PTT button:

Enter the number using your keypad. -or-

Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

Tip: If you are entering a Talkgroup number, enter # before the number.

3Press O.

Turning Off One Touch PTT

1From the main menu, select Settings > 2-Way Radio > One Touch PTT.

2Set this option to Off.

Setting Flip Actions

For Answering Calls

To set your phone to answer calls when you open the flip:

1From the main menu, select Settings > Phone Calls > Flip Activation > Flip to Ans.

Setting Flip Actions

2 Set this option to On.

To set your phone not to answer calls when you open the flip:

Set Flip to Ans to Off in step 2.

For Ending Calls

To set your phone to end calls when you close the flip:

1From the main menu, select Settings > Phone Calls > Flip Activation > Flip to End.

2Set this option to On.

To set your phone not to end calls when you close the flip:

Set Flip to End to Off in step 2.

Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call.

43

Advanced Calling Features

Group Calls

A group call is similar to a Private call, but is made to all members of a Talkgroup at once.

Before you can make or receive group calls, a Talkgroup must be established. After the Talkgroup is established, you must join the Talkgroup.

Joining a Talkgroup

Your sales representative or your service provider establishes Talkgroups for you and assigns each Talkgroup a Talkgroup number. You can choose a name for each of your Talkgroups when you create entries for them in Contacts.

To receive group calls made to any of these Talkgroups, you must join the Talkgroup.

1Press A under Contcs. -or-

From the main menu, scroll to Contacts and press O.

2Scroll to the Talkgroup you want to join.

3Press A under Join.

Note: You can only monitor one Talkgroup at a time.

Making Group Calls

1Press #. Then enter the Talkgroup number using the keypad. -or-

Choose the Talkgroup name from Contacts or recent calls list.

2Proceed as if making a Private call.

Receiving Group Calls

To answer a group call:

Proceed as if answering a Private call. Only one person at a time may speak on a group call.

The Private ID or name of the person who is speaking will appear on the display below the Talkgroup number.

Turning off Group Calls

To set your phone to prevent you from hearing group calls to your Talkgroup:

1From the main menu, select Settings > 2-Way Radio > Tkgrp Silent.

2Set this option On.

To set your phone to let you hear group calls to your Talkgroup:

Set Tkgrp Silent to Off in step 2.

44

Call Timers

Call timers measure the duration of your phone calls, Private or group calls, and circuit data use, as well as the number of Kilobytes sent and received by your phone:

???Last Call ??? displays the duration of your most recent phone call.

???Phone Reset ??? keeps a running total of your phone call minutes, until you reset it.

???Phone Lifetime ??? displays the total minutes of all your phone calls.

???Prvt/Grp Reset ??? keeps a running total of all of your Private and group call minutes, until you reset it.

???Prvt/Grp Lifetime ??? displays the total minutes of all your Private and group calls.

???Circuit Reset ??? keeps a running total of all of your circuit data use, until you reset it.

???Circuit Lifetime ??? displays the total minutes of all of your circuit data use.

???Kbytes Reset ??? keeps a running total of the number of Kilobytes sent and received by your phone, until you reset it.

To view or reset a timer:

1 From the main menu, select Call Timers.

Call Timers

2Select the feature you want to view or reset.

3To view a feature without resetting: Press O when you are finished viewing. -or-

To reset a feature: Press Aunder Reset. Press O or press A under Yes to confirm.

Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only.

Using Your Phone as a Modem

Note: This feature may not be offered by your service provider.

To use your phone as a modem with a laptop, handheld device, or desktop computer:

1 Open the connector cover.

connector cover

45

Advanced Calling Features

2With the phone???s display facing up, insert the data cable???s connector into the accessory connector, until you hear a click.

3Insert the data plug into the data port of the other device.

When used as a modem, your phone has these data transfer modes:

???Circuit data ??? used for sending and receiving faxes and for transferring large files

???Packet data ??? used for small file transfers such as email

To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your i860 phone for packet and circuit data calls, refer to the Wireless Data Services User???s Guide or contact your service provider.

Making TTY Calls

Note: This feature may not be offered by your service provider.

To use your phone to make phone calls using a teletypewriter (TTY) device:

1Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device.

2Make sure that your phone???s TTY feature is on and select the TTY mode you want to use.

3Use your phone to enter phone numbers and make calls.

When you make a TTY call, these icons appear on the phone???s display:

NPhone call is active.

OPhone call is on hold.

46

TTY device features such as Turbo-Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone.

Turning On the TTY Feature

Your phone???s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate. To make sure the TTY feature is on:

From the main menu, select Settings > Phone

Calls > TTY > Use TTY. This field must say On.

Choosing a Mode

Your phone supports these TTY modes:

???TTY ??? You type and read text on your TTY device.

???VCO (Voice-Carry-Over) ??? You speak into your phone and read text replies on your TTY device.

???HCO (Hearing-Carry-Over) ??? You type text on your TTY device and listen to voice replies on your phone speaker.

To change mode while not in a call:

1From the main menu, select Settings > Phone Calls > TTY > Type.

2Select the TTY mode you want.

Making TTY Calls

When you make a TTY call, the call begins in the TTY mode you last selected.

To change mode during a call using your phone:

1Press m.

2Select In Call Setup > TTY > Type.

3Select the mode you want.

To change mode during a call using your TTY device, issue one of the following commands:

??????VCO please??? ??? to select VCO mode

??????HCO please??? ??? to select HCO mode

??????HCO off please??? ??? to turn off HCO mode

Important: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear. (For information on setting the volume of your phone speaker, see ???Setting the Volume??? on page 105.)

Changing the TTY Baud Rate

By default, your phone???s TTY baud rate is set to 45.45, the baud rate required for TTY calls within the U.S. To make calls outside the U.S., set your TTY baud rate to 50.0.

47

Advanced Calling Features

To change the TTY baud rate:

1From the main menu, select Settings > Phone Calls > TTY > Baud.

2Select the baud rate for your location.

48

Memo

Memo lets you store a number, make a call to that number, and save it to Contacts.

To create a memo:

1From the main menu, select Memo.

2Enter the number using your keypad.

3Press O.

To view the memo later:

1 From the main menu, select Memo.

To delete the memo:

1From the main menu, select Memo.

2Press and hold A under Delete.

3Press O.

To edit the memo:

1From the main menu, select Memo.

2Enter the new number.

3Press O.

To make a call to the memo number:

1From the main menu, select Memo.

2To make a phone call, press s. -or-

To make a Private call, press the PTT button.

To store the memo number to Contacts:

1From the main menu, select Memo.

2Press m.

3Select Store to Cntcs.

4To store the number as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry.

5With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.

6If you want to add more information to the entry, follow the applicable instructions in ???Creating Entries??? on page 30.

7Press A under Done.

49

Ring Tones

To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT, or Datebook reminders:

1From the main menu, select Ring Tones.

2Make sure VibeAll is set to Off.

3Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound.

Tip: Highlighting a ring tone lets you hear it.

4Select the features you want to assign the ring tone to.

5When you are finished, press Aunder Done.

Note: This icon M appears on the display if you set your phone to neither vibrate nor make a sound for phone calls.

Setting Your Phone to Vibrate

You can set your phone to vibrate instead of making a sound when you receive all phone calls, Private calls, group calls, call alerts, message notifications, pictures sent using Send via PTT, and Datebook reminders.

1From the main menu, select Ring Tones > VibeAll.

2Set this option to On.

Tip: Pressing the volume controls to turn down the volume as far as possible sets VibeAll to On.

To set your phone to vibrate instead of making a sound for some features but not others:

1From the main menu, select Ring Tones.

2Make sure VibeAll is set to Off.

3Select Vibrate from the list of ring tones.

4Select the features you want to set to make no sound.

5When you are finished, press Aunder Done.

Note: To set ring options for Private calls and group calls, see ???Setting Your Phone to Vibrate??? on page 105.

50

These icons indicate how the ringer is set.

QThe phone always vibrates instead of making a sound.

RThe phone vibrates instead of making a sound for phone calls.

uGroup calls and Private calls are heard through the earpiece, not the speaker.

These icons may appear at the same time.

Ring and Vibrate

To set your phone to ring and vibrate when you receive phone calls or call alerts:

1From the main menu, select Ring Tones.

2Make sure VibeAll is set to Off.

3Scroll through the list of ring tones and highlight the one you want to assign.

4Press m.

5Select Assign w/Vibe.

6Select the features you want to set to ring and vibrate.

7When you are finished, press Aunder Done.

This icon S appears on the display.

Ring and Vibrate

Assigning Ring Tones to Contacts

You can set the ring tone your phone makes when you receive phone calls or call alerts from someone you have stored in Contacts.

1From the main menu, select Ring Tones.

2Make sure VibeAll is set to Off.

3Scroll through the list of ring tones and select the one you want to assign.

4Select A Contact.

5Select the Contacts entry you want to assign the ring tone to.

Note: You can assign some ring tones to Contacts from the media center as well. See ???Assigning to Contacts??? on page 70.

Viewing Ring Tone

Assignments

1From the main menu, select Ring Tones.

2Make sure VibeAll is set to Off.

3Highlight any ring tone.

4Press m.

5Select Overview.

51

Ring Tones

6Scroll to view ring tones assigned to features and Contact entries.

Downloading More Ring

Tones

If you want to use other ring tones, you can download them into your phone for a fee. Go to www.motorola.com/idenupdate for a selection of custom ring tones and downloading instructions.

Note: Ring tones purchased from this web site may be downloaded only once. If you delete a ring tone from your phone, you must purchase it again to download it again.

Managing Memory

To view the amount of memory available for custom ring tones:

1From the main menu, select Ring Tones.

2Make sure VibeAll is set to Off.

3Highlight any ring tone.

4Press m.

5Select Memory Usage.

Deleting custom ring tones frees memory.

Note: Ring tones are stored in your phone using the same memory space used to store messages, Java application data, items accessible through the media center, and voice records created when your phone is in a call. Deleting some of these other items frees memory for ring tones.

Deleting Custom Ring Tones

Deleting a ring tone from the list of ring tones deletes it from all parts of your phone, including the media center and Contacts.

To delete a custom ring tone:

1From the main menu, select Ring Tones.

2Make sure VibeAll is set to Off.

3Scroll to the ring tone you want to delete.

4Press m.

5Select Delete.

6Press A under Yes to confirm.

52

Entering Text

You can enter text, numbers, and symbols into your phone using Alpha, Word, Numeric, or Symbol text input modes.

l Alpha ??? Press a key several times for each character.

j Word ??? Press a key once for each letter while words likely to be the one you want are chosen from a database.

iSymbols ??? Enter punctuation and other symbols.

k Numeric ??? Enter numbers.

When you access a screen that requires you to enter text, you start in the mode last used.

To choose a text input mode:

1At a screen that requires you to enter text, press m.

2Select the text input mode you want to use. A checkmark appears next to the current mode.

Using Word Mode

In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and displays the most commonly used matching word. You can add you own words to this database.

Entering a Word

1Select Word as your text input mode.

2Type a word by pressing one key for each letter.

For example, to type ???test??? press 8 37 8.

The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing.

3If the word that appears is not the desired word, press 0to change the word on the display to the next most likely word in the database.

Repeat until the desired word appears.

If the desired word does not appear, you can add it to the database.

53

Entering Text

Adding Words to the Database

1Select Alpha as your text input mode.

2Type the word using Alpha mode.

3Select Word as your text input mode.

4Press #.

The word you typed in Alpha text entry mode is now in the database.

Note: You cannot store alphanumeric combinations, such as Y2K.

Choosing a Language

To change the language of the database:

1At a screen that requires you to enter text, press m.

2Select Languages.

3Select the language you want for your database.

Special Function Keys

Some of the phone???s keys assume different functions while in Alpha or Word mode.

Spaces

Press # for a space.

Capitalization

When you press and hold the # key, it acts as a 3-way toggle. Press and hold # to make the next letter typed uppercase (shift), to make all subsequent letters typed uppercase (caps lock), or to go back to lowercase letters.

These icons appear in the top row of your display:

m or X Shift is on.

n or W Caps lock is on.

When neither of these icons appear, letters typed are lowercase. Scrolling up after typing a letter makes that letter uppercase.

Note: Your phone automatically makes the first letter of a sentence uppercase.

Punctuation

Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want.

Note: Additional punctuation symbols are available in Symbols mode.

54

Messages

You can receive the following types of messages on your phone:

???Voice mail messages

???Short Message Service (SMS) text messages

???Depending on your service provider, you may have the option to receive fax mail and Net alerts.

You have 2 ways to access the messages you receive:

???Respond to the message notification that appears when the message is received.

???Dismiss the message notification and access the message later through the message center.

You can listen to or view these messages, delete them, or continue to store them in the message center.

Message Notifications

When you receive a message, your phone notifies you with text on the display and a notification tone or vibration. You can access the message or dismiss the notification.

If you dismiss the notification, the message is not deleted. It can be accessed through the message center.

If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, you dismiss the notification, or the alert time-out expires.

Setting Notification Options

To control whether your phone sounds message notification tones while you are on phone calls:

1From the main menu, select Settings > Phone Calls > Notifications.

2Select the option you want:

???Receive All ??? Tones sound during calls for all types of messages.

???Msg Mail Only ??? Tones sound during calls for SMS messages; tones for all other types of messages are held until you end calls.

???Delay All ??? Tones for all types of messages are held until you end calls.

Tip: To set notification options during a call: Press m. Select In Call Setup > Notifications.

55

Messages

Message Center

The message center manages your messages.

All your messages are stored in the message center. The message center shows how many messages you have of each type.

To access your messages through the message center:

1From the main menu, select Messages.

2Scroll to the type of message you want to access.

3Press Oor press A under the display option on the left.

56

Voice Mail Messages

Note: To receive voice mail messages, you must first set up a voice mail account with your service provider.

Receiving a Message

When you receive a voice mail message, New Voice Mail Message appears on the display.

To call your service provider???s voice mail system and listen to the message:

Press A under Call.

To dismiss the message notification: If the flip is closed, press .. -or-

If the flip is open, press Oor press A under Back, or close the flip.

If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message.

Accessing Voice Mail From

the Message Center

From the main menu, select Messages > Voice

Mail.

Sending Unanswered Calls to Voice Mail

To send a phone call to voice mail instead of answering it:

If the flip is closed, press .. -or-

Press e. -or-

Press A under No.

57

MOSMS Messages

Note: This feature may not be offered by your service provider.

If your service provider offers MOSMS, your phone sends SMS messages using MOSMS and receives SMS messages from other phones that are using

MOSMS.

Setting Up

Before you begin using MOSMS, you may need to set up your signature, service center number, and expiration information:

1From the main menu, select Messages.

2Scroll to Text Inbox.

3Press m.

4Select Text Msg Setup.

5Select Signature.

Enter your signature. It may be up to 11

characters long. See ???Entering Text??? on page 53. When you are finished, press O.

6Select Srvc Cntr No.

Enter the phone number of your service center. If you do not know this number, contact your service provider.

When you are finished, press O.

7Select Expire After.

This is the amount of time messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded.

Scroll to select the number of days you want your messages to be saved.

When you are finished, press O.

8Select Auto Clean Up. Set this option to On if you want your phone to delete sent messages.

If you set Auto Clean Up to On, select Clean Up After to set the number of days after which sent messages are deleted or the number of messages to be kept.

9Press A under Done to save the information you entered.

Receiving a Message

To view the message:

Press A under Read.

To dismiss the message notification: If the flip is closed, press .. -or-

If the flip is open, press Aunder Exit or close the flip.

58

If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.

Tip: While reading a text and numeric message that contains a phone number, you can press s to call that number.

Reading from the Message Center

1From the main menu, select Messages > Text Inbox.

2Select the message you want to read. -or-

Press the number of the message you want to read.

3If the message fills more than one screen, scroll to read it.

Tip: Scrolling through one message lets you view the next message.

4To save the message, press Aunder Ok. -or-

To reply to the message, press Aunder Reply.

-or-

To see all other choices, including forwarding and deleting the message, calling the sender, or

Reading from the Message Center

storing the sender???s number in Contacts, press

m.

Creating and Sending

Messages

1From the main menu, select Messages > [Create Message]. -or-

Select [Create Message] from Text Inbox, Text Outbox, or Drafts. -or-

Highlight Quick Notes and press A under

Compose.

Tip: This option is available from many context-sensitive menus in the message center.

2To address the message:

Use the keypad to enter the phone number of the person you want to send the message to.

-or-

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

When you are finished, press O.

3Enter the text of the message. See ???Entering Text??? on page 53. -or-

59

MOSMS Messages

To use a quick note: Press Aunder Browse. Scroll to the quick note you want. For more information on quick notes, see ???Using Quick Notes???.

When you are finished, press O.

4If you want to send the message, press Oor press Aunder Send. -or-

To delete the message without sending it, press

Aunder Cancel. -or-

If you want to request confirmation of delivery,

save the message as a draft, or set the sending method, press m. Select the option you want.

Beginning Messages From the Recent

Calls List

1From the recent calls list, scroll to the name you want to send a message to.

2If the entry has more than one phone number stored, view the phone number you want to send the message to.

3Press m.

4Select Compose SMS. The message is automatically addressed to the phone number you chose.

5Follow step 3 through step 4 of ???Creating and Sending Messages??? on page 59.

Beginning Messages From the Idle

Screen

1Using the keypad, enter the number you want to send a message to.

2Press m.

3Select Compose SMS. The message is automatically addressed to the phone number you chose.

4Follow step 3 through step 4 of ???Creating and Sending Messages??? on page 59.

Using Quick Notes

Quick notes are short, pre-written text messages that you can create, edit, and send. You can store up to 20 quick notes. A quick note may be up to 30 characters long.

To create a quick note:

1From the main menu, select Messages > Quick Notes > [New Note].

2Press O or press Aunder Create. Enter text. See ???Entering Text??? on page 53. -or-

To choose from pre-installed notes, select the note you want.

Tip: For more options, including sending the quick note, press m.

60

Using Drafts

When you save a message as a draft, it is saved in the drafts folder.

To edit a draft:

1From the main menu, select Messages > Drafts.

2Select the draft you want to edit.

3To edit the fields you want to change, follow step 2 through step 4 in ???Creating and Sending Messages??? on page 59.

Resending Messages

To resend a message:

1From the main menu, select Messages > Text Outbox.

2Scroll to the message you want to resend. -or-

Press the number of the message you want to resend.

3Press s. -or-

Press m. Select Resend.

Creating and Sending Messages

Deleting Sent Messages

To delete a sent message:

1From the main menu, select Messages > Text Outbox.

2Scroll to the message you want to delete.

3Press A under Delete.

4Press A under Yes to confirm.

To delete all unlocked sent messages:

1From the main menu, select Messages > Text Outbox.

2Press m.

3Select Delete All.

4Press A under Yes to confirm.

Locking and Unlocking Sent

Messages

When you lock a message, it cannot be deleted until you unlock it.

Locking a Message

1From the main menu, select Messages > Text Outbox.

2Scroll to the message you want to lock or unlock.

3Press m.

61

MOSMS Messages

4 Select Lock.

Unlocking a Message

1From the main menu, select Messages > Text Outbox.

2Scroll to the message you want to lock or unlock.

3Press A under Unlock.

Sorting Messages

You can sort messages in your inbox by sender, time and date, and status. You can sort messages in your outbox by recipient, time and date, and status.

1From the main menu, select Messages > Text Inbox or Messages > Text Outbox.

2Highlight any messages.

3Press m.

4Select Sort and Order.

5Select Sort By to specify the sorting method.

6Select Order By to specify the sorting order.

Managing Memory

Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages.

The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some.

The outbox and drafts folder share memory space. Together they can hold 30 messages. If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some.

To view the amount of memory available in your text inbox:

1From the main menu, select Messages > Text Inbox.

2Press A under Memory.

To view the amount of memory available in your outbox and drafts folder:

1From the main menu, select Messages > Text Outbox or Messages > Drafts.

2Press A under Memory.

62

Camera

The camera in your i860 phone takes pictures and records videos. You can save these pictures and videos in your phone and view them through the media center.

You can send the pictures you take in Private calls, assign them to Contacts entries, or set them as your phone???s wallpaper.

Taking Pictures

1From the main menu, select Camera. -or-

Access the camera from the media center. See ???Accessing the Camera??? on page 73. -or-

Access the camera during a Private call. See ???Starting a Call by Sending a Picture??? on page 75. -or-

If you were previously recording video: Press m. Select Capture Picture.

2If you want to adjust the zoom, lighting, picture quality, picture size, or a timer, set these options. See ???Setting Picture Options???.

3Aim the camera lens on the flip. Use the internal display as the viewfinder.

4When the image you want to capture is in view, press and release O or press and release A under Capture. Releasing the key captures the picture.

5To save the picture, press Oor press Aunder

Store. -or-

To discard the picture without saving it, press A under Discard. -or-

To choose another action, see ???More Actions for Captured Pictures??? on page 65.

Setting Picture Options

When you take a picture, you can set the zoom, lighting, picture quality, and picture size, and set a timer to delay capturing the picture.

To set any of these options:

1Press m.

2Select the option you want.

3Select the value you want for that option.

Tip: You can also set zoom by scrolling up and down and set picture size by scrolling left and right.

If you discard the picture or save it by pressing O or by selecting Save from the context-sensitive menu, no picture options except the timer are changed. The timer returns to its default: Off.

63

Camera

If you choose any other action, all picture options return to their defaults.

Zoom

The Zoom option lets you choose a closer view.

The values are:

???1X ??? no change

???2X ??? twice as large

???4X ??? 4 times as large

1X is the default.

Spotlight

The Spotlight option turns on the camera's short-range spotlight to provide additional light for close-up pictures (approximately 24 inches).

Off is the default.

Picture Quality

The Picture Quality option lets you choose the sharpness the picture will have after it is captured.

The values are:

???Normal ??? no change

???Fine ??? higher resolution

When you receive your phone, Normal is the default. You can choose a new default for this option. See ???Customizing the Camera??? on page 66.

Pictures taken with this option set to Fine use more memory space.

Picture Size

The Picture Size option lets you choose the size the picture will have after it is captured.

From smallest to largest, the values are: Small, Medium, Wallpaper, Large, and XLarge.

If you plan to use the image as wallpaper, it is best to select the Wallpaper size.

When you receive your phone, Medium is the default. You can choose a new default for this option. See ???Customizing the Camera??? on page 66.

Larger pictures use more memory space.

Self-Timer

The Self-Timer option lets you delay capturing the picture for the number of seconds you choose.

If you use this option, the timer starts when you perform step 4 in ???Taking Pictures??? on page 63. The camera captures the picture after the amount of time you chose elapses.

To turn off the timer before the picture is captured, press A under Cancel.

The values are: Off, 10 seconds, 15 seconds, 20 seconds.

64

Off is the default.

More Actions for Captured Pictures

After you capture a picture as described in ???Taking Pictures??? on page 63, you can send it in a Private call, assign it to a Contacts entry, or set it as your phone???s wallpaper.

You can also access the media center to view and perform actions on the pictures there.

Choosing any of these options automatically saves the captured picture.

Sending in Private Calls

For information on sending captured pictures in Private calls, see ???Starting a Call by Sending a Picture??? on page 75.

Assigning to Contacts

1After you have captured a picture, press m.

2Select Set As Caller ID.

3To store the number as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry.

More Actions for Captured Pictures

Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned.

4If you selected an entry with a picture assigned, press Oor press Aunder Yes to overwrite the assigned picture. -or-

Press A under No to return to the list of entries without overwriting the assigned picture.

Setting as Wallpaper

1After you have captured a picture, press m.

2Select Set As Wallpaper.

Note: If you later set your wallpaper to change automatically, the picture is included. See ???Wallpaper??? on page 106.

Recording Videos

The camera records videos up to 10 seconds long. Recording a video is similar to taking a picture.

1From the main menu, select Camera. -or-

Access the camera from the media center.

2Press m.

3Select Record Video.

4If you want to adjust lighting: Press m.

65

Camera

Select Spotlighting.

Select On or Off.

5Aim the camera lens on the flip. Use the internal display as the viewfinder.

6When you are ready to record, press and release O or press and release A under Record. Releasing the key starts the recording.

7If you want to end the video before 10 seconds are up, press Aunder Stop.

8To save the video, press O. -or-

To view the video without saving it, press A under Review. -or-

To discard the video without saving it, press A under Discard.

Accessing the Media Center

You can access the media center from the camera at any time, except when you are or using the Camera Setup menu or viewing the memory screen.

1Press m.

2Select Media Center.

Customizing the Camera

The Camera Setup menu lets you customize the camera:

???Ask for Name ??? If you set this option to On, you are prompted to enter a name for each picture before you save it. Otherwise, pictures are automatically saved with the date and a number as their names.

???Shutter Sound ??? sets the sound the camera makes as it captures a picture.

Note: The volume of the shutter sound is controlled by your phone???s speaker volume. To set your phone???s speaker volume, see ???Setting Your Phone to Vibrate??? on page 105.

???Default Size ??? sets the default value for the Picture Size option.

???Default Quality ??? sets the default value for the Picture Quality option.

To access the Camera Setup menu:

1Access the camera.

2Press m.

3Select Camera Setup.

66

Managing Memory

Tip: This option is available from many context-sensitive menus when you are using the camera.

Managing Memory

While you are taking pictures or recording video, the percentage of free memory appears on the screen.

To view your used memory, free memory, and memory capacity:

1Access the camera.

2Press m.

3Select Memory Usage.

Tip: This option is available from many context-sensitive menus when you are using the camera.

To free memory, delete items from the media center. See ???Media Center??? on page 68.

67

Media Center

The media center lets you access pictures, videos, and audio recordings.

All pictures and videos saved in your phone can be accessed through the media center.

The following audio recordings can be accessed through the media center:

???voice records created when your phone was not in a call

???musical ring tones in the list of ring tones

???audio recordings you downloaded to your phone

Pictures in the media center can be sent in Private calls using Send via PTT. See ???Using Send via PTT??? on page 74.

Note: You can transfer pictures or videos from your phone to your computer using a data cable and software you can download. Go to idenphones.motorola.com/iden/support for more information.

Viewing the Media Center

To access the media center:

From the main menu, select Media Center. -or-

From the camera, press m. Select Media Center.

Scroll to view the items in the media center.

Choosing Thumbnail View or List View

You can set the media center to show a thumbnail of each picture as you view the list of items or show the list of items without thumbnails.

To change views:

1Access the media center.

2Press m.

3Select Set View.

4Select Plain List View or Thumbnail List View.

Filtering by Media Type

You can set the media center to show all items, only pictures, only videos, or only audio recordings.

Setting Filtering

1Access the media center.

2Press m.

3Select Filter.

4Select All, Pictures, Video, or Audio.

Tip: You can also scroll left or right, or press * or #, to scroll through these options while viewing the list of items.

68

Keeping the Last Filter Setting

You can set the media center to show all items every time you access it or to keep the filtering setting you had when you last viewed it.

1Access the media center.

2Press m.

3Select Setup.

4Select Remember Filter to keep the filtering setting you had when you last viewed the media center. -or-

Select Off to show all items every time you access the media center.

When you receive your phone, the media center is set to show all items every time you access it.

Accessing Items Listed

To access a picture, video, or audio recording, select it from the list of items in the media center.

With an item selected, scroll up or down to access the items that appeared before and after it in the list.

Forward Locked Items

Sorting by Time or Name

You can set the media center to sort items by the time the item was created or by the name of the item.

1Access the media center.

2Press m.

3Select Setup.

4Select Sort.

5Select By Time or By Name.

When you receive your phone, the media center is set to sort items by time.

Forward Locked Items

Some items saved to the media center from Private calls or by downloading may be forward locked. This means you cannot send them to anyone. You cannot remove forward locking from an item.

Forward locked items cannot be sent in Private calls and cannot be uploaded from your phone.

Forward locked items are usually copyright protected.

69

Media Center

When you view items in the media center, one of these icons appears next to each forward locked item:

f Forward locked.

c Forward lock and locked.

When an item is locked, it cannot be deleted from the media center. See ???Locking Items??? on page 72. Locking an item has no effect on its forward locking.

Pictures

The media center lets you view pictures, send them in Private calls, assign them to Contacts entries, or set them as your phone???s wallpaper.

Viewing

To view a picture, select it from the list of items in the media center.

If your phone is set to show thumbnails, a thumbnail of each picture appears next to the picture in the list of items. If your phone is not set to show thumbnails, this icon g appears next to the picture.

To see a larger or smaller view of the picture you are viewing:

1Press m.

2Select Zoom.

3Select the zoom option you want.

If the picture does not fit in the display, scroll left and right and up and down to view different parts of the picture.

Sending in Private Calls

For information on sending stored pictures in Private calls, see ???Starting a Call by Sending a Picture??? on page 75.

Assigning to Contacts

1Scroll to or select the picture you want to assign to a Contacts entry.

2Press m.

3Select Set As Caller ID.

4To store the number as a new entry, select [New Contact]. -or-

To store the number to an existing entry, select the entry.

Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned.

70

5If you selected an entry with a picture assigned, press Oor press Aunder Yes to overwrite the assigned picture. -or-

Press A under No to return to the list of entries without overwriting the assigned picture.

Setting as Wallpaper

1Scroll to or select the picture you want to set as wallpaper.

2Press m.

3Select Set As Wallpaper.

Note: If you later set your wallpaper to change automatically, the picture is included. See ???Wallpaper??? on page 106.

Videos

The media center lets you play videos.

Playing

To play a video, select it from the list of items in the media center.

This icon V appears next to each video in the list of items.

Videos

Tip: When viewing the list of items in the media center, you can scroll left or right, or press * or #, to change the type of media that is displayed in the list.

To stop the video before it has finished playing: Press O. -or-

Press A under Stop. -or-

Scroll left.

To restart the video, scroll right.

Audio Recordings

The media center lets you play audio recordings and assign them to Contacts entries.

Playing

To play an audio recording, select it from the list of items in the media center.

This icon a appears next to each audio recording in the list of items.

Tip: When viewing the list of items in the media center, you can scroll left or right, or press * or #, to change the type of media that is displayed in the list.

71

Media Center

To stop the audio recording before it has finished playing:

Press O. -or-

Press A under Stop. -or-

Scroll left.

To restart the audio recording, scroll right.

When you play an audio recording, an animated image appears on the display.

Assigning to Contacts

To assign an audio recording in the media center as the ring tone for a Contacts entry:

1Scroll to or select the audio recording you want to assign.

2Press m.

3Select Assign As Ringer.

4Select the Contacts entry you want to assign the ring tone to.

Note: You cannot assign a voice record as the ring tone for a Contacts entry.

Renaming Items

1Access the media center.

2Scroll to or select the item you want to rename.

3Press A under Rename.

4Delete the item???s name and enter a new name.

5Press O.

Locking Items

When you lock an item in the media center, it cannot be deleted until you unlock it.

1Access the media center.

2Scroll to or select the item you want to lock or unlock.

3Press m.

4Select Lock to lock the item. -or-

Select Unlock to unlock the item.

When you view items in the media center, one of these icons appears next to each locked item:

R Forward locked.

c Forward lock and locked.

Deleting Items

Deleting items from the media center deletes them from all parts of your phone, including the list of ring tones, the list of voice records, and Contacts.

72

Deleting an Item

1Scroll to or select the item you want to delete.

2Press m.

3Select Delete.

4Press O or Aunder Yes to confirm.

Deleting All Items

You can delete all unlocked items currently in view, depending on how media center filtering is set. See ???Filtering by Media Type??? on page 68. If filtering is set to show all types of media center items, all unlocked items are deleted.

1Access the media center.

2Press m.

3Select Delete All.

4Press O or Aunder Yes to confirm.

Accessing the Camera

You can access the camera from the media center at any time, except when you are viewing a list of audio recordings, playing an audio recording, or using the Setup menu.

Select [Camera] from the list of items. -or-

Press A under Camera. -or-

Press m. Select Camera.

Accessing the Camera

Managing Memory

To view your used memory, free memory, and memory capacity:

1Access the media center. -or-

Scroll to or select any item in the media center.

2Press m.

3Select Memory Usage.

To free memory, delete items in the media center.

Note: Items in the media center are stored in your phone using the same memory space used to store messages, Java applications data, and voice records created when your phone is in a call. Deleting some of these other items frees memory for messages.

73

Using Send via PTT

Send via PTT lets you exchange pictures, My Info, and contact information with other phones that have this capability. You do this through Private calls.

Send via PTT cannot be used during group calls.

Sending a Picture

Note: This feature may not be offered by your service provider.

When you send a picture using Send via PTT, the picture you sent appears on the display of the phone you are engaged in the Private call with and is saved to that phone???s media center.

Sending a Picture During a Call

You can send a picture at any time during a Private call, whether you made or received the call*.

* Additional charges may apply.

You cannot talk or listen on a Private call while a picture is being transmitted. Other activities, such as taking or searching for a picture, do not prevent you from talking or listening.

Taking a Picture to Send

Note: For more information on taking pictures, see ???Taking Pictures??? on page 63.

1While in a Private call, press Aunder Camera.

2When the picture you want to capture is in view, press Oor press Aunder Capture.

3To save the picture so you can send it, press O or press Aunder Save. -or-

To discard the picture without sending it, press Aunder Discard. Repeat step 2 until you capture a picture you want to send.

4Press the PTT button to send the picture.

5Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted.

6When prompted, press the PTT button to resume the Private call.

Sending a Stored Picture

1While in a Private call: Press m. Select Browse Pictures.

A list of pictures that can be included in a Private call appears.

2Select the picture you want to send.

3Press the PTT button to send the picture.

74

4Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted.

5When prompted, press the PTT button to resume the Private call.

Starting a Call by Sending a Picture

You can start a Private call after you capture a picture with the camera or by choosing a stored picture from the media center.

To do this, you must have the Private ID and IP address of the person you want to send to stored in your Contacts.

1Capture a picture with the camera. See ???Taking Pictures??? on page 63. -or-

From the media center, scroll to or select the picture you want to send in a Private call.

2Press m.

3Select Send Picture via PTT.

A list of names from Contacts appears. These names have Private IDs and IP addresses stored.

4Select the name of the person you want to send the picture to.

5Press the PTT button to send the picture.

Receiving a Picture

6Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted.

7When prompted, press the PTT button to resume the Private call.

Receiving a Picture

When someone sends you a picture using Send via PTT, your phone emits tone or vibrates and a message appears on the display asking you if you want to accept the picture.

When you receive a picture, it appears every time you are in a Private call with the person who sent it unless you delete the picture from the media center. This occurs for the last 20 people who sent you pictures.

Accepting a Picture

1When you see the message asking you if you want to accept the picture, press Aunder Yes.

2Wait while the picture is transmitted. The Private call is temporarily interrupted while a picture is transmitted.

3When prompted, press the PTT button to resume the Private call.

Tip: If you want to stop the transmission before it is finished, press Aunder Cancel.

75

Using Send via PTT

Declining a Picture

When you see the message asking you if you want to accept the picture, press Aunder No.

The picture is not transmitted.

Setting Picture Capability

To turn your phone???s ability to send and receive pictures in Private calls on or off:

1From the main menu, select Settings > 2-Way Radio > PTT Picture.

2Select On or Off.

This setting does not affect your phone???s ability to send and receive My Info or contact information.

Sending My Info and Contact

Information

When you send My Info or contact information using Send via PTT, the information you sent appears on the display of the phone you are engaged in the Private call with. After the call, the information appears on the recent call list of that phone.

Sending My Info

You can control what portion of the information in My Info is sent and whether it is sent automatically in every Private call or only when you choose to send it. See ???Setting Sending Options??? on page 80.

Tip: When you send My Info, certain information, such as your email address or fax number, cannot be included. To send complete contact information, create an entry for yourself in Contacts and send.

Sending Information During a Call

1While in a Private call, press m.

2With Send My Info via PTT highlighted, press

O.

3When Ready to Send appears on the display, press the PTT button to send the information.

Starting a Call by Sending Information

1From the main menu, select My Info.

2Press m.

3With Send My Info via PTT highlighted, press

O.

4Use the keypad to enter the Private ID you want to send the information to. -or-

76

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

5When Ready to Send appears on the display, press the PTT button to send the information.

Sending Contact Information

You can send contact information by selecting a Contacts entry or an item from the recent calls list.

Contacts entries that contain only addresses cannot be sent. When Contacts entries are received, they do not include ring tones or pictures.

These items from the recent calls list can be sent:

???Contact information sent from other phones

???Calls to or from numbers store in your Contacts list

Sending Information During a Call

1While in a Private call, press m.

2Select Contacts or Recent Calls.

3Scroll to the Contacts entry or item in the recent calls list you want to send.

4When Ready to Send appears on the display, press the PTT button to send the information.

Sending My Info and Contact Information

Starting a Call by Sending Information

1From the Contacts list, scroll to or select the entry you want to send. -or-

From the recent calls list, scroll to or select the item you want to send.

2Press m.

3Select Send Contact via PTT.

4Use the keypad to enter the Private ID you want to send. -or-

Press A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.

5When Ready to Send appears on the display, press the PTT button to send the information.

Receiving My Info or Contact Information

When you receive My Info or contact information from another phone, an icon appears on the display:

j My Info.

d Contact information.

77

Using Send via PTT

To view the information while still in the Private call:

1Press m.

2Select View Contact.

You can also view My Info from other phones on the recent calls list. See ???Recent Calls??? on page 24.

78

My Info

My Info lets you view information about your phone and send this information to other phones.

Viewing My Info

1From the main menu, select My Info.

2Scroll to see the entire screen.

The My Info screen contains:

???My Name ??? You can enter your name here.

???Line 1 and Line 2 ??? your phone numbers for phone lines 1 and 2. Each number appears when you receive your first call on that line.

???Private ??? Your Private ID is the number that others use to contact you using Private calls. This number appears when you receive your first Private call.

???Group ID ??? the number of the Talkgroup you have joined.

???Carrier IP ??? the IP address assigned to your service provider. This number appears when you register for packet data services.

???IP1 Address and IP2 Address ??? the IP addresses you use to access the Internet with your phone.

???Circuit Data ??? the number you use if you want to use your phone to transfer circuit data. See ???Using Your Phone as a Modem??? on page 45. You receive this number from your service provider.

Note: If you request equipment-related transactions on your account, your service provider may require you to provide specific information about your phone. By pressing manytime while in My Info, a submenu will appear that includes your phone's service status, unit information, and phone identification numbers including IMEI, SIM ID, and Serial Number (SN). Please be prepared to supply the representative with this information when requesting these types of transactions.

Editing My Info

To edit My Info to enter or change the text that appears in My Name:

1From the main menu, select My Info.

2Press A under Edit.

3Select Name.

4Enter the name you want to appear. See

???Entering Text??? on page 53. When you are finished, press O.

79

My Info

You can also edit the information in Line 1, Line 2, and Ckt, but your changes are only temporary. The next time your phone registers on the network, the your actual phone numbers and circuit data number appear again in My Info.

Setting Sending Options

Your phone can send information in My Info to other phones that have this capability.

You can control what portion of the information in My Info is sent and whether it is sent automatically in every Private call or only when you choose to send it.

Information Sent

The information your phone sends always includes

My Name and Private.

It may include Line 1, Line 2, Carrier IP, and

Circuit Data, depending on the options provided by your service provider and how you set your sending options.

To change which fields are sent:

1From the main menu, select My Info.

2Press m.

3Select Send My Info Setup > Info to Send.

4A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select the field.

5When you are finished, press Aunder Done.

Automatic Sending

To control whether your information is sent automatically:

1From the main menu, select My Info.

2Press m.

3Select Send My Info Setup > AutoSend.

4To set your information to be sent automatically, set this option to On. -or-

To set your information to be sent only when you choose to send it, set this option to Off.

80

Voice Records

A voice record is a recording you make with your phone and can play back. You can record notes to yourself when your phone is not in a call or record phone calls when your phone is in a call.

Voice records created when your phone is not in a call can be accessed through the media center. See ???Media Center??? on page 68.

Viewing Voice Records

To view your list of voice records:

1From the main menu, select VoiceRecord.

2Scroll to view more voice records.

Voice Records Icons

One of these icons appears next to each voice record:

cA voice record made while your phone was not in a call.

vA voice record made while your phone was in a call.

Filtering by Voice Record Type

You can set your phone to show all voice records, only voice records created when your phone was in a call, or only voice records created when your phone was not in a call.

1From the main menu, select VoiceRec.

2Press m.

3Select Filter.

4Select the option you want:

???All ??? show all voice records.

???In Call ??? show only voice records created when your phone was in a call.

???Normal ??? show only voice records created when your phone was not in a call.

Tip: You can also press * or # to scroll through these options while viewing the list of voice records.

Creating Voice Records

Phone Not in a Call

To record a note to yourself:

1From the main menu, select VoiceRecord > [New VoiceRec].

81

Voice Records

2Say the message you want to record into the microphone.

Tip: To stop recording before you are finished, press A under Pause. To start recording again, press A under Resume. To stop recording and discard the voice record at any time, press Aunder Cancel.

3 When you are finished recording, press O.

To add to the end of an existing voice record:

1From the main menu, select VoiceRecord.

2Scroll to the voice record you want to add to.

3Press m.

4Select Add To.

5When you are finished recording, press O.

Phone in a Call

To record a phone call:

1While on an active call, press m.

2Select Record.

3When you are finished recording, press O.

Note: Recording of phone calls is subject to applicable laws regarding privacy and recording of phone conversations.

Playing Voice Records

1From the main menu, select VoiceRecord.

2Select the voice record you want to play.

3To stop the voice record while it is playing, press

O.

Tip: To pause or resume, press any number key.

Labeling Voice Records

When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label.

1From the main menu, select VoiceRecord.

2Scroll to the voice record you want to label.

3Press A under Label.

4Enter the label you want to assign. See ???Entering Text??? on page 53.

5Press O.

Locking Voice Records

When you lock a voice record, it cannot be deleted until you unlock it.

1From the main menu, select VoiceRecord.

2Scroll to the voice record you want to lock or unlock.

82

3Press m.

4Select Lock to lock the message. -or-

Select Unlock to unlock the message.

When a voice record is locked, this icon Rappears next to it.

Deleting Voice Records

Deleting a voice record from the voice record list deletes it from all parts of your phone, including the media center.

Deleting a Voice Record

1From the main menu, select VoiceRecord.

2Scroll to the unlocked voice record you want to delete.

3Press m.

4Select Delete.

5Press O or Aunder Yes to confirm.

Deleting All Voice Records

1From the main menu, select VoiceRecord.

2Scroll to any voice record.

3Press m.

4Select Delete All.

5Press O or Aunder Yes to confirm.

Deleting Voice Records

Managing Memory

To view the amount of memory available for voice records:

1From the main menu, select VoiceRecord.

2With [New VoiceRec] highlighted, press A under Memory. -or-

With any voice record highlighted, press m. Select Memory.

To free more memory by deleting all unlocked voice records:

1From the voice records memory screen, press Aunder Delete.

2Press O or Aunder Yes to confirm.

Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, and all items accessible through the

media center. Deleting some of these other items frees memory for voice records.

83

Java Applications

Your phone arrives with Java applications loaded and ready to install. You can download and install more Java applications.

Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone.

Installing Applications

1From the main menu, select Java Apps.

2Select the application or suite of applications you want to install.

Installation messages appear as the application installs.

3If you want to create a shortcut to the Java application on the main menu: Press Aunder Next. Press A under Yes. Press O.

4Press A under Done.

Running Applications

To run an application that has a shortcut on the main menu:

1From the main menu, select the application or suite of applications you want to run.

2If you have selected a suite of applications, select the application you want to run.

To run an application that does not have a shortcut on the main menu:

1From the main menu, select Java Apps.

2Select the application or suite of applications you want to run.

3If you have selected a suite of applications, select the application you want to run.

Tip: If you don???t hear the sounds associated with the Java application, select Settings > Volume and check the volumes of Java Speaker and Java Earpiece.

Suspending Applications

When you suspend an application, it does not stop running. It goes to the background so that you can run another application in the foreground.

To suspend an application:

Press e or close the flip.

To view your suspended applications:

From the Java menu, select Suspended Apps.

You can have up to 3 applications running at one time ??? 1 running in the foreground and 2 in the background.

84

Resuming Applications

You can resume a suspended application at any time. This brings it to the foreground.

1From the Java menu, select Suspended Apps.

2Select the application you want to resume.

Ending Applications

To end an application:

1From the main menu, select Java Apps.

2If the application you want to end is part of a suite of applications, select the suite.

3Scroll to the application you want to end. Press A under End. -or-

If End is not one of your options: Press m. Select

End.

Tip: You can also end applications from the

Suspended Apps screen.

To end all applications:

1From the main menu, select Java Apps.

2Scroll to Suspended Apps.

3Press m.

4Select End All.

5Press O or press Aunder Yes to confirm.

Resuming Applications

6If you want to end all applications without letting them exit, press A under EndNow.

Downloading Applications

If you want to run more Java applications, you can download them into your phone.

Go to www.motorola.com/idenupdate for a selection of Java applications and downloading instructions.

Deleting Applications

To delete an application:

1From the main menu, select Java Apps.

2Scroll to the application you want to delete.

3Press m.

4Select Deinstall.

5Press O or press Aunder Yes to confirm.

6When your phone has finished deleting the application, press A under Done.

To delete all Java applications:

1From the main menu, select Java Apps.

2Scroll to Java System.

3Press m.

4Select Delete All.

85

Java Applications

5 Press O or press Aunder Yes to confirm.

Managing Memory

To view the amount of memory available for Java applications:

1From the main menu, select Java Apps > Java System.

2Press A under Next.

3To see more memory information, press A under Next again.

Deleting Java applications frees memory.

Note: Java application data is stored in your phone using the same memory space used to store messages, voice records, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications.

Shortcuts on the Main Menu

When you install an application, you can create a shortcut to the application on the main menu.

To create a shortcut to an application that is already installed:

1From the main menu, select Settings >

Personalize > Menu Options > Add/Remove Apps. -or-

From the main menu: Press m. Select Main Menu Setup > Add/Remove Apps.

2Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it.

3Scroll to the application you want to create a shortcut for.

4Press O.

5Press A under Done.

To remove a shortcut:

1From the main menu, select Settings >

Personalize > Menu Options > Add/Remove Apps. -or-

From the main menu: Press m. Select Main Menu Setup > Add/Remove Apps.

2Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it.

3Scroll to the application you want to remove the shortcut for.

86

4Press O.

5Press A under Done.

Java Applications and GPS

Enabled

Some Java applications can make use of your phone???s GPS feature to determine the approximate geographical location of your phone. (See ???GPS Enabled??? on page 90 for more information on the GPS feature.) However, for privacy reasons, you may not always want Java applications to access the location of your phone. Your phone protects your privacy by giving you the option to block all or some Java applications from accessing the location of your phone.

Setting Privacy for All Java

Applications

These options control the privacy of all Java applications on your phone:

???Restricted ??? No Java or similar software applications may access the location of your phone. However, location information may still be available to the phone???s owner, fleet manager, or account administrator.

Java Applications and GPS Enabled

???Unrestricted ??? All Java applications may access the location of your phone, without notifying you.

???By Permission ??? When a Java application attempts to access the location of your phone, you are prompted to give permission. However, location information may still be available to the phone???s owner, fleet manager, or account administrator.

See ???Setting Privacy Options??? on page 96 for information on choosing these options.

Granting or Denying Permission

If you choose By Permission, you must grant or deny each Java application access to the location of your phone when the application requests access for the first time. You may be required to grant or deny subsequent requests from the same application, depending on the privacy setting you choose for the individual Java application (see ???Setting Privacy for Each Java Application??? on page 88).

When a Java application requests access to the location of your phone, a screen appears informing you.

87

Java Applications

To deny this request:

1Press A under Deny. The application does not access the location of your phone.

2Select the denying option you want:

???Always ??? If the application requests access to the location of your phone again, the request is denied without notifying you.

???For this session ??? If the application requests access to the location of your phone again before you power off your phone, the request is denied without notifying you.

???Only Once ??? If the application requests access to the location of your phone again, you are prompted to grant or deny permission.

To grant this request:

1Press Aunder Grant. The application accesses your phone???s location.

2Select the granting option you want:

???Always ??? If the application requests access to the location of your phone again, the request is granted without notifying you.

???For this session ??? If the application requests access to the location of your phone again before you power off your phone, the request is granted without notifying you.

???Only Once ??? If the application requests access to the location of your phone again, you are prompted to grant or deny permission.

Setting Privacy for Each Java Application

After a given Java application requests access to the location of your phone for the first time, you have the opportunity to set the GPS privacy option for that Java application.

1From the main menu, select Java Apps.

2Scroll to the application or suite of applications you want to set the privacy option for.

If the application has requested access to the location of your phone, this icon S appears when you highlight the application.

3Press m.

4Select Permissions.

5Select the privacy option you want for this application:

???Always ??? The application always has permission to access the location of your phone, without notifying you.

88

Java Applications and GPS Enabled

???Ask ??? When the application requests access to the location of your phone, you are prompted to grant or deny permission (see ???Granting or Denying Permission??? on page 87).

???Never ??? When the application requests access to the location of your phone, the request is denied without notifying you.

89

GPS Enabled

Your phone???s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature. For example, GPS location fixes are often difficult to obtain indoors, in covered locations, between high buildings, or in other situations where you have not established a clear broad view of the sky. SEE: ???IMPORTANT: Things to Keep in Mind???.

When you make a 911 emergency call, the GPS feature of your phone can help emergency personnel locate you if your phone has adequate access to GPS satellite signals and your emergency response center is equipped to process such information.

You can also use the GPS feature to view your approximate location. Location information appears on the phone???s display.

Java applications loaded on your phone can also request your location. If your phone is connected to a laptop computer or similar device, software running on that device can request your location. To protect your privacy, you can control whether these requests are granted.

IMPORTANT: Things to Keep in Mind

If you are using the GPS feature of your phone while driving, please give full attention to driving and to the road.

Where adequate signals from multiple satellites are not available (usually because your GPS antenna cannot establish a view of a wide area of open sky), the GPS feature of your phone WILL

NOT WORK. Such situations include but are not limited to:

???In underground locations

???Inside of buildings, trains, or other covered vehicles

???Under any other metal or concrete roof or structure

???Between tall buildings or under dense tree-cover

???Near a powerful radio or television tower

90

???When your GPS antenna is covered (for example, by your hand or other object) or facing the ground

???In temperature extremes outside the operating limits of your phone

Walking or driving very slowly may also substantially reduce GPS performance.

Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you.

Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 150 feet (45 meters) but sometimes much further from your actual location. Advice on how to improve GPS performance is provided in ???Enhancing GPS Performance??? on page 93.

While the GPS feature of your phone can be a valuable navigational aid, it does not replace the need for careful navigating and good judgment.

Never rely solely on one device for navigation.

Remember that the accuracy of the location

Making an Emergency Call

information and the time needed to obtain it will vary depending on circumstances, particularly the ability to receive signals from adequate numbers of satellites.

On emergency calls, your phone uses assistance information from the phone network to improve the speed and accuracy of your phone???s location calculation: if such assistance information becomes unavailable, it may reduce the speed and accuracy of the location calculation.

The satellites used by the GPS feature of your phone are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radionavigation Plan. These changes may affect the performance of the GPS feature of your phone.

Making an Emergency Call

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.

When you make an emergency 911 call, the GPS feature of your phone begins to seek information to calculate your approximate location. It will take the GPS feature of your phone some time to determine your approximate location. Even where your phone has good access to sufficient

91

GPS Enabled

GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center.

In some cases, your local 911 emergency response center may not be equipped to receive GPS location information. For this reason, and because the GPS location information reported is only approximate or may not be available in your location (see ???IMPORTANT: Things to Keep in Mind??? on page 90), always report your location to the 911 operator you speak to when making an emergency call, if able, just as you would when using a phone without GPS capabilities.

Note: If you are concerned about whether your local 911 emergency response center is equipped to receive GPS location information, contact your local authorities.

In general, if your phone has access to signals from more GPS satellites, your location will be determined faster and more accurately than if your phone has access to signals from fewer GPS satellites.

If your phone does not have adequate access to GPS satellites signals, the location of the nearest cell tower in contact with your phone is automatically made available to the emergency response center, if the center has the capability to receive such information.

See ???Enhancing GPS Performance??? on page 93 for information on how to help your phone determine your location.

Viewing Your Approximate

Location

1From the main menu, select GPS > Position.

2Scroll to view the entire screen.

This displays the following information about the last time your location was calculated:

???The time (as Greenwich Mean Time) and date that the location was last calculated

???The approximate location, expressed as latitude and longitude

???The estimated accuracy of the calculated location. This estimate of accuracy is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported.

92

???The number of satellites used to calculate the location. In general, more satellites make for better accuracy.

To calculate your location again:

Press A under Rfrsh.

It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone???s display saying your phone is scanning for satellites. For tips on getting the best location calculation, see ???Enhancing GPS Performance???.

The Position screen displays the updated information.

To cancel a location calculation before it is completed:

Press Aunder Cancel to return to the Position screen. -or-

Press e to return to the idle screen.

Each time approximate location of your phone is calculated, the latest location information is stored in your phone and remains there even when your phone is powered off. You will see this information the next time you view the Position screen.

Enhancing GPS Performance

If you received a phone call or alert while attempting to determine your location, the Position screen will disappear, but your phone will continue attempting to determine its location. If it is successful, the new location information will be displayed the next time you view the Position screen.

Enhancing GPS Performance

Sometimes the GPS feature of your phone may be unable to complete a location calculation successfully. If this happens when you are making an emergency call, the location of the nearest cell tower in contact with your phone is made available to the appropriate emergency response center if the center has the capability to receive such information. If this happens when you are trying to view your location on the phone???s display, you will see a message indicating that your phone cannot access satellites.

93

GPS Enabled

To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location:

???Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.

???Extend your phone antenna.

???Hold your phone to enhance reception. Signals from GPS satellites are transmitted to your GPS antenna, which is in your phone antenna. Hold your phone away from your body, giving the antenna clear access to satellite signals. Do not cover the antenna area with your fingers or anything else.

GPS antenna

94

???Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance.

???In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car???s windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window.

Note: Although moving your phone at a walking pace decreases GPS performance, moving it at the speed of a moving car does not.

???Stay in network coverage. Depending on who your service provider is, the network will provide your phone with information that helps determine your location more quickly and accurately.

Updating Satellite Almanac Data

Updating Satellite Almanac

Data

Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date.

The United States government maintains an almanac of data about where GPS satellites are as they orbit the Earth. This information is available to your phone. Keeping your satellite almanac up to date helps your phone determine your location more quickly.

The almanac contains information about the location of satellites, their operational status, and other satellite information. Keeping this information updated enhances the performance of your GPS feature. In most cases, your phone will be able to get a fix in strong satellite signal conditions with outdated almanac data, but it may take longer.

Note: When you make an emergency call, your phone does not rely upon the almanac to determine your location.

If your satellite almanac data is out of date, your phone may prompt you to update it. Follow the instructions that appear on the phone???s display. You may be asked to go to a web site or call a customer care number.

95

GPS Enabled

Setting Privacy Options

Your phone???s GPS privacy options control whether Java applications on your phone or other software applications may view the location of your phone.You may set your phone to one of these GPS privacy options.

Note: Privacy options do not apply to the transmission of location information during emergency 911 calls.

To set your GPS privacy options:

1From the main menu, select GPS > Privacy.

2If your GPS PIN security feature is enabled, enter your GPS PIN. (See ???Setting the GPS PIN Security Feature??? for more information.)

3Select the privacy option you want:

???Restricted ??? No Java or similar software applications may view the location of your phone. However, location information may still be available to the phone???s owner, fleet manager, or account administrator.

???Unrestricted ??? All applications may view the location of your phone, without notifying you.

???By Permission ??? When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone???s owner, fleet manager, or account administrator.

Setting the GPS PIN Security Feature

To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN.

When you receive your phone, the GPS security feature is turned off, so you do not have to enter a GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a GPS PIN to access your GPS privacy options.

To turn the GPS Enabled security feature on or off:

1From the main menu, select Settings > Security > GPS PIN.

2Select On or Off.

3Enter the current GPS PIN.

Note: When you receive your phone, your GPS PIN is 0000.

4Press A under Ok.

96

To change your GPS PIN:

1From the main menu, select Settings > Security > Change Password > GPS PIN.

2Enter the current GPS PIN.

Note: When you receive your phone, your GPS PIN is 0000.

3Press A under Ok.

4Enter the new 4- to 8-digit GPS PIN.

5Press A under Ok.

6Enter the new 4- to 8-digit GPS PIN to confirm.

7Press A under Ok.

Using GPS with Map Software

You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by DeLorme or Microsoft. This way, if your phone has good access to GPS signals, your approximate position on a map can be made available as you travel in a vehicle.

To do this, connect your phone to your laptop (or other device) with a data cable and set your phone to transmit data (see ???Getting Started??? on page 98). Your phone then provides your approximate location to the device running the map software,

Using GPS with Map Software

which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map.

See ???Enhancing GPS Performance??? on page 93 for more details on obtaining good location information.

Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone???s battery power quickly.

Software Compatibility

Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in NMEA-0183 format and supports the following NMEA-0183 sentences: GGA, GLL, GSA, GSV, RMC, and VTG.

The map software running on your laptop or other device must support NMEA 3.0.

97

GPS Enabled

Getting Started

To connect your phone to your laptop or other device:

1 Open the connector cover.

connector cover

2With the phone???s display facing up, insert the data cable???s connector into the accessory connector, until you hear a click.

3Insert the data plug into the COM port of your laptop or other device.

Make sure no other application is using the COM port selected.

Make sure the COM port settings of your laptop or other device are set to the following:

???Bits per second: 4800

???Data bits: 8

???Parity: None

???Stop bits: 1

???Flow control: Hardware

To set your phone to send location information to your laptop or other device:

1From the main menu, select GPS > Interface.

2Set NMEA OUT to On.

Your phone is now sending location data to your laptop or other device.

To stop your phone from sending location data to your laptop or other device:

Set NMEA OUT to Off.

Each time you power your phone on, NMEA OUT is automatically set to Off.

98

Datebook

Datebook stores up to 250 events. You can store events over a 13 month period ??? 12 months after and 1 month before the current date.

A Datebook event contains:

???A subject ??? A name you assign to the event. You can also enter a phone number, Private ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event.

???A location ??? The location of the event. You can also enter a phone number, Private ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event.

???A start time ??? The start time automatically assigned to an event is the beginning of the day. You can change the start time, or assign no start time, before storing the event.

???A duration ??? the length of time the event lasts

???A date ??? The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event. You can change this date before storing the event.

???A repeat ??? lets you store the event as a recurring event.

???A reminder ??? If an event has a start time, you can set Datebook to remind you that the event is going to start.

???a ring tone for the reminder

???a profile that your phone is switched to while the event is occurring

???a Java application that starts when the event starts

Only the subject and date are required.

Viewing Datebook

To access Datebook:

From the main menu, select Datebook.

You can view Datebook by the day, by the week, or by the month. You can also view the details of any event.

In day view, brief information about each event for that day appears.

In week view, events appear as markers corresponding to their times.

In month view, days with events appear with a marker in the corner.

99

Datebook

To view an event:

1Select the day the event occurs.

2Select the event.

To change the current view:

1While viewing Datebook, press m.

2Select the view you want.

Navigating Datebook

To scroll through Datebook:

Scroll left and right using the navigation key. -or-

In week view and month view, press * or #. To see more in day view:

Scroll up and down using the navigation key. To highlight a day in month view:

Enter the date using the keypad.

To go to today???s date:

1While viewing Datebook, press m.

2Select Go To Today.

To go to any date in Datebook:

1While viewing Datebook, press m.

2Select Go To Date.

3Select the date you want.

Creating Events

Every Datebook event must have a subject and be stored to a date. Other information is optional.

You may enter the information in any order by scrolling through the event details.

After you have entered the information you want, you can press Aunder Done to store the event to Datebook.

If you decide you don???t want to store the event: Press A under Cancel.

To create a Datebook event:

1While viewing datebook, press A under New.

-or-

In day view, select [New Event].

2To assign a subject to the event: Select Subject.

Enter the name. See ???Entering Text??? on page 53. -or-

Press A under Browse to choose from common event names. -or-

Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number.

100

When you are finished, press O.

3If you want to assign a location to the event: Select Location.

Enter the location. See ???Entering Text??? on page 53. -or-

Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number.

When you are finished, press O.

4The start time automatically assigned to an event is the beginning of the day. If you want to change the start time or assign no start time:

Select Start.

Enter the start time you want. -or-

Press A under No Time to assign no start time.

5If you want to assign a duration to the event: Select Duration.

Select the duration you want. -or-

Select Custom to enter a duration.

6The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event. To change the date of the event:

Creating Events

Select Date.

Enter the date you want.

7If you want to make the event a recurring event: Select Repeat.

Select the repeat cycle you want.

If the event occurs more than once a week: Select Multiple Day. Select the days you want.

Press A under Done.

Select the date you want this event to stop recurring.

8If you want to create a reminder for this event: Select Reminder.

Select the reminder time you want. -or-

Select Custom to enter a reminder time.

Note: If an event has no start time, you can not create a reminder for it.

9If you have entered all the information you want for this event, press Aunder Done. -or-

If you want to assign a ring tone, a profile, or a Java application to the event, see ???Assigning More Options??? on page 102.

101

Datebook

Assigning More Options

To assign more options before storing an event:

1If you have created a reminder for the event and want to set the ring tone for that reminder:

Select Ring Tone.

Select the ring tone you want from the ring tones stored in your phone.

2If you want to assign a profile that your phone is switched to while the event is occurring:

Select Profile.

Select the profile you want from the profiles stored in your phone.

Your phone switches to this profile when the event starts and switches back to the previous profile when the event ends.

3If you want to assign a Java application to start when the event starts:

Select App.

Select the application you want from the Java applications stored in your phone.

If you created a reminder for this event, your phone prompts you to start the Java application when you get the reminder.

Editing Events

To change the details of an event:

1Select the day the event occurs.

2Select the event.

3Press A under Edit.

Tip: To copy an event to another date: Press m. Select Copy.

4Follow the applicable instructions in ???Creating Events??? on page 100 to edit the various fields.

Deleting Events

1Select the day the event occurs.

2Select the event.

3Press m.

4Select Delete.

5If the event is not a recurring event, press O or press Aunder Yes to confirm. -or-

If the event is a recurring event:

Select This Event Only to delete only the event selected in step 2.

Select Repeat Event to delete all occurrences of the event.

102

Receiving Reminders

If you created a reminder for a Datebook event, when the reminder time occurs, your phone notifies you with text on the display and a reminder tone.

To view more details about the event:

Open the flip. -or-

Press A under View.

To dismiss the reminder:

If the flip is closed, press .. -or-

If the flip is open, press O, press Aunder Dismiss, or close the flip.

Tip: You can set your phone to power on when you receive a reminder. See ???Customizing Datebook Setup??? on page 104.

For Events with Java Applications

If you assigned a Java application to start when the event starts, you can start the application when you get the reminder.

1Press m.

2Select Launch.

Receiving Reminders

For Events with Numbers to Call

If you stored a phone number, Private ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from the reminder for that event.

Making Calls From Datebook

If you stored a phone number, Private ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from Datebook.

You can call the number stored in Subject and the number stored in Location if one is a phone number and the other is a Private ID or Talkgroup number. If both are the same type of number, the number in Subject is called or sent a call alert. To call or send a call alert to the number stored in Location, you must delete the number stored in

Subject.

To make a call or send a call alert:

1Highlight or select the event containing the number you want to call or send a call alert to.

2To make a phone call: Press s. -or-

Press m. Select Call # in Event.

103

Datebook

To make a Private call or group call:

Press and hold the PTT button on the side of your phone. -or-

If you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup.

To send a call alert:

Press m. Select Alert # in Event.

Customizing Datebook Setup

To access Datebook set up options:

1From the main menu, select Datebook.

2Press m.

3Select Setup.

You can view or change these options:

???Start View ??? sets Datebook to start in day view, week view, or month view when you access Datebook.

???Daily Begin ??? sets the beginning of your day. This is the earliest time of day displayed in week view, if you have a 12-hour day view.

???Reminders ??? If this option is set to Only When On, your phone reminds you of events only when it is on. If this option is set to Always, your phone powers itself on when you receive reminders. To avoid draining the battery, your phone then powers itself off after a short time.

???Delete After ??? sets the amount of time Datebook waits to delete an event after is occurs.

???Time Shift ??? lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone.

???Alert Timeout ??? sets the amount of time a tone continues to sound when you receive a Datebook reminder.

???Clock ??? controls whether the time and date appear on the idle screen; sets time and date format; sets year.

104

Customizing Your Phone

Setting the Volume

Of the Earpiece and Speaker

1From the main menu, select Settings > Volume.

2Scroll to Earpiece to set the earpiece volume.

-or-

Scroll to Speaker to set the speaker volume.

3To set the volume:

Scroll left or right. -or-

Press the volume controls.

Of the Ringer

Press the volume controls.

Setting Your Phone to Vibrate

To set your phone to vibrate instead of making a sound when you receive phone calls, Private calls, group calls, call alerts, message notifications, pictures sent using Send via PTT, and Datebook reminders, see ???Setting Your Phone to Vibrate??? on page 50.

To set your phone to vibrate instead of making a sound when you receive Private calls and group calls, even if you want your phone to ring for other features:

1From the main menu, select Settings > 2-Way Radio > Alert Type.

Tip: If Alert Type does not appear: From the main menu, select Ring Tones. Make sure VibeAll is set to Off. Repeat step 1.

2Select Vibrate to set your phone to vibrate.

Tip: Select Silent in step 2 to set your phone to neither vibrate nor make a sound.

Changing the Look of Your

Phone

Themes

A theme lets you control the look of the display by changing the color scheme, wallpaper, the look of the main menu, and the look of the display options.

To change the theme of your phone:

1From the main menu, select Settings >

Display/Info > Theme

2Select the theme you want.

105

Customizing Your Phone

Wallpaper

A wallpaper is an image that appears on the idle screen.

Note: Some themes may prevent you from changing your wallpaper.

Choosing a Wallpaper

1From the main menu, select Settings > Display/Info > Wallpaper > Wallpaper.

2Select the wallpaper you want.

Tip: If you want to see what the wallpaper looks like, press Aunder View.

Setting Wallpaper to Change Automatically

Note: This feature may not be offered by your service provider.

1From the main menu, select Settings > Display/Info > Wallpaper > Auto Cycle.

2Select how often you want the wallpaper to change.

Any of the wallpapers in your phone may appear on the idle screen.

Including Pictures From the Media Center

If you have set wallpapers to change automatically, you can include pictures stored in the media center as images that may appear on the idle screen.

1From the main menu, select Settings > Display/Info > Wallpaper > Select Pictures.

2Select the pictures you want. -or-

Select All to include all pictures in the media center.

3When you are finished, press Aunder Done.

Setting Text Size

To set the size of the text on the internal display:

1From the main menu, select Settings > Display/Info > Text Size.

2Select the option you want:

???Zoom ??? 11 characters per line

???Standard ??? 14 characters per line

???Compressed ??? 18 characters per line

To set your phone to briefly display very large digits when you enter numbers at the idle screen:

1From the main menu, select Settings > Display/Info > Large Dialing.

2Set this option to Large Digits.

106

Setting Contrast

To set the contrast of the display:

1From the main menu, select Settings > Display/Info > Contrast.

2To set the contrast of the internal display, select

Int. Display. -or-

To set the contrast of the external display, select

Ext. Display.

3Scroll left or right to set the contrast.

Setting the Menu View

You can set the items on your main menu and Java applications menu to appear as large icons or a list:

1From the main menu, select Settings > Display/Info > Menu View. -or-

From the main menu: Press m. Select Main Menu Setup > Menu View.

2To choose a list, select List View. -or-

To choose large icons, select Icon View.

Setting the Backlight

A backlight lights the display and keypad when you make or receive a call, open or close the flip, or press keys or buttons.

Temporarily Turning Off Calls

If you do not do any of these things for 10 seconds, the backlight dims. If you do not do any of these things for 30 seconds or more, the backlight turns off.

When the backlight is off, pressing a key on the keypad turns the backlight on but does not perform the action associated with the key.

To control how long the backlight stays on:

1From the main menu, select Settings > Display/Info > Backlight > Timer.

2Select the number of seconds you want the backlight to stay on.

Tip: To control how long the backlight stays on while a Java application is displayed: Select

Settings > Display/Info > Backlight >

Java Timer.

To set the keypad backlight to light up only in low light conditions:

1From the main menu, select Settings > Display/Info > Backlight > Sensor.

2Set this option to On.

Temporarily Turning Off Calls

Sometimes you may want to have your phone on, but turn off its ability to make and receive calls, such as when you are on an airplane.

107

Customizing Your Phone

To set your phone so that it cannot make or receive phone calls, Private calls, or group calls; or transfer data:

1From the main menu, select Settings > Advanced > Airplane Mode.

2Set this option to On.

This icon U appears.

To restore your phone???s ability to do all these things:

Set this option to Off.

Using Settings

Settings contains many submenus that let you customize your phone.

For information on applying groups of settings to your phone together, see ???Profiles??? on page 112.

Display/Info Features

The Display/Info menu controls how the keypad and display appear:

???Wallpaper ??? controls the wallpaper that appears on the idle screen.

???Theme ??? changes look of the display.

???Text Size ??? sets size of text on the display.

???Home Icons ??? controls whether main menu icons appear on the idle screen.

???Backlight ??? controls backlight illumination.

???Clock ??? controls whether the time and date appear on the idle screen; sets time and date format; sets year.

???Menu View ??? controls whether the items on your main menu and Java applications menu appear as large icons or a list.

???Large Dialing ??? sets large digits to appear on the idle screen when you enter a number.

???Contrast ??? sets the contrast of the display.

???Language ??? sets the language that your phone displays.

Phone Calls Features

The Phone Calls menu controls how your phone handles phone calls:

???Set Line ??? sets phone line 1 or phone line 2 as the active line for outgoing calls.

???Any Key Ans ??? If this feature is on, you can answer calls by pressing any key on the keypad.

???Auto Redial ??? sets your phone to automatically redial calls you make when the system is busy.

???Call Waiting ??? See ???Call Waiting??? on page 40.

108

???Auto Ans ??? sets your phone to automatically answer an incoming call after a specified number of rings. When this feature is on, the phone answers by connecting you to the caller; it does not send the call to voice mail, unless you are out of coverage or on the line.

???Flip Activation ??? See ???Setting Flip Actions??? on page 43.

???Minute Beep ??? causes a beep to sound every minute of an active call.

???Call Duration ??? causes the duration of a call to appear on the display when the call ends.

???TTY ??? See ???Making TTY Calls??? on page 46.

???Notifications ??? See ???Message Notifications??? on page 55.

???Java App Control ??? If you have installed a Java application that answers phone calls, this setting lets you turn that application on.

2-Way Radio Features

The 2-Way Radio menu controls how your phone handles Private calls and group calls:

???Tkgrp Silent ??? controls whether you hear group calls to your Talkgroup. See ???Group Calls??? on page 44.

???Tkgrp Area ??? lets you define your Talkgroup area.

Using Settings

???One Touch PTT ??? See ???One Touch PTT??? on page 42.

???Alert Type ??? controls how your phone notifies you when you receive Private calls and group calls.

???PTT Picture ??? sets your phone???s ability to send and receive pictures in Private calls. See ???Using Send via PTT??? on page 74.

Personalize Features

The Personalize menu makes main menu items easier to access.

???Menu Options ??? Reorder Menu lets you change the order of the items on the main menu by grabbing and moving them; Add/Remove Apps lets you create a shortcut to a Java application on the main menu.

???Up Key ??? sets the main menu item you access when you scroll up from the idle screen.

???Down Key ??? sets the main menu item you access when you scroll down from the idle screen.

???Left Key ??? sets the main menu item you access when you scroll left from the idle screen.

???Right Key ??? sets the main menu item you access when you scroll right from the idle screen.

109

Customizing Your Phone

???Center Key ??? sets the main menu item you access when you press O from the idle screen.

???Left Sftkey ??? sets the main menu item you access when you press the left option key from the idle screen.

???Right Sftkey ??? sets the main menu item you access when you press the right option key from the idle screen.

???Power Up ??? sets the main menu item you see when you power on your phone. To set the idle screen to be the first thing you see when you power on your phone, select Default Ready.

Volume Features

The Volume menu sets the volume of sounds your phone makes:

???Line 1 ??? sets ringer volume for phone line 1.

???Line 2 ??? sets ringer volume for phone line 2.

???Messages ??? sets the volume of message notifications and Datebook reminders.

???Earpiece ??? sets the volume of sound coming out of the earpiece.

???Speaker ??? sets the volume of sound coming out of the speaker.

???Keypad ??? sets the volume of sound associated with pressing keys and buttons.

???Java Earpiece ??? sets the volume of sound associated with Java applications coming out of the earpiece.

???Java Speaker ???sets the volume of sound associated with Java applications coming out of the speakers.

???Data ??? sets the volume of sounds that notify you that you are receiving a circuit data call.

Security Features

The Security menu lets you turn security features on and off and change passwords:

???Phone Lock ??? turns on a feature that locks your phone, either immediately or automatically after a set period of inactivity. An unlock code is required to enable this feature, to unlock the phone, and to set a new unlock code. Contact your service provider for your default unlock code.

???Keypad Lock ??? locks the phone???s keypad, either immediately or automatically after a set period of inactivity.

???SIM PIN ??? enables and disables your phone???s SIM PIN security feature. See ???Turning the PIN Requirement On and Off??? on page 12.

110

???GPS PIN ??? enables and disables your phone???s GPS PIN security feature. See ???Setting the GPS PIN Security Feature??? on page 96.

???Change Passwords ??? changes your phone unlock code, security code, SIM PIN, and GPS PIN.

Advanced Features

The Advanced menu contains advanced and rarely used Settings features.

???Alert Timeout ??? sets the amount of time a tone continues to sound when you receive a message notification, call alert, or Datebook reminder.

???Headset/Spkr ??? sets the headset option. See ???Using a Headset??? on page 119.

???Connectivity ??? Network ID sets the phone???s network IDs and their roaming options under the direction of your service provider; Master Reset lets your service provider reset your service in the event of a security or provisioning problem.

???Reset Defaults ??? Reset Settings returns all settings to their original defaults; Reset All returns all settings to their original defaults and erases all stored lists. Use only under the direction of your service provider.

Using Settings

???Return to Home ??? controls how long the recent calls list displays after calls.

???Airplane Mode ??? prevents your phone from making or receiving phone calls, Private calls, or group calls; or transferring data.

???Phone Only ??? prevents your phone from making or receiving Private calls or group calls, or transferring data.

Note: This feature may not be offered by your service provider.

???Baud Rate ??? sets the baud rate at which your phone communicates with a laptop computer, PC, or similar device.

111

Profiles

A profile is a group of settings saved together so that you can apply them to your phone easily.

A profile contains these settings:

???Ring Tones ??? sets all options described in ???Ring Tones??? on page 50, except assigning ring tones to Contacts.

???Display/Info ??? sets Wallpaper, Color Palette, Text Size, and Backlight options. See ???Display/Info Features??? on page 108.

???Phone Calls ??? sets Set Line and Auto Ans options. See ???Phone Calls Features??? on page 108.

???Volume ??? sets all options described in ???Volume Features??? on page 110.

???Call Filter ??? controls which calls, call alerts, and message notifications your phone responds to. See ???Setting Call Filtering??? on page 115.

???Advanced ??? sets headset option. See ???Using a Headset??? on page 119.

Your phone arrives with pre-set profiles. You can also create your own profiles.

Viewing Profiles

To view the profiles stored in your phone:

1From the main menu, select Profiles.

2Scroll to the profile you want to view.

Tip: The profile that is currently in effect on your phone has a checkmark next to it.

3Press A under View.

4Scroll to view settings.

Switching Profiles

To apply a profile to your phone:

1From the main menu, select Profiles.

2Scroll to the profile you want to apply.

3Press O.

The profile you selected is now in effect.

How Changing Settings

Affects Profiles

Many of the settings contained in profiles can be set without switching or editing profiles ??? for example, by selecting Settings or Ring Tones to set options, or by setting the volume of the phone???s ring using the volume controls.

112

When you do this, your phone either:

???Updates the profile in effect to reflect these changes, without notifying you -or-

???Creates a temporary profile that contains these changes

Note: This feature may not be offered by your service provider.

To set your phone to create a temporary profile that contains changes you make to settings:

1From the main menu, select Profiles.

2Press m.

3Select Setup > Temp Profile.

4Set this option to On.

To set your phone to update the profile in effect to reflect any changes you make to settings:

Set Temp Profile to Off in step 4.

If your service provider does not offer the Temp Profile option, your phone always updates the profile in effect to reflect the changes you make to settings.

Temporary Profiles

Temporary Profiles

If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles.

A temporary profile is based on the profile in effect when you made the changes, but reflects the changed settings. Making more changes further updates the temporary profile, for as long as it is in effect.

A temporary profile stays in effect until you switch profiles, power off your phone, or delete it (or the profile it is based on) from the list of profiles.

If you do not store a temporary profile, it is deleted when you switch profiles or power off your phone.

A temporary profile is automatically given the same name as the profile it is based on, but with an asterisk (*) in front of it.

When you view a temporary profile???s settings, the options that differ from the profile it is based on have an asterisk in front of them.

Storing a Temporary Profile

To store a temporary profile as a new profile:

1 From the main menu, select Profiles.

113

Profiles

2Scroll to the temporary profile.

3Press m.

4Select Store As New.

5Enter the name you want to give the profile. See ???Entering Text??? on page 53.

When you are finished, press O.

To overwrite the profile the temporary profile is based on:

1From the main menu, select Profiles.

2Scroll to the temporary profile.

3Press m.

4Select Store Changes.

The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone.

Creating Profiles

1From the main menu, select Profiles.

2Select [New Profile]. -or-

Scroll to any profile. Press m. Select New.

3Enter the name you want to give the profile. See ???Entering Text??? on page 53.

When you are finished, press O.

4If you want to base this profile on an existing profile: Select Copy from. Select the profile you want to base this profile on. If you do not choose a profile to copy from, the new profile is based on a default profile.

5Press A under Create.

6Scroll through the list of options and set their values.

7Press A under Done.

Editing Profiles

1From the main menu, select Profiles.

2Scroll to the profile you want to edit.

3Press m.

4Select Edit.

5Scroll through the list of options and set their values.

Deleting Profiles

To delete a profile:

1From the main menu, select Profiles.

2Select the profile you want to delete.

Note: A temporary profile is automatically deleted when the profile it is based on is deleted.

114

3Press m.

4Select Delete.

5Press O or press Aunder Yes to confirm.

To delete all profiles:

1From the main menu, select Profiles.

2Press m.

3Select Delete All.

4Press O or press Aunder Yes to confirm.

Setting Call Filtering

The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your phone notifies you of, and which it ignores.

To set call filtering:

1While setting options for a profile, select Call Filter.

2To set filtering options for phone calls, select

Phone.

???Off sets your phone to notify you of all phone calls.

???All sets your phone to ignore all phone calls.

???All Contacts sets your phone to notify you only of phone calls from numbers stored in Contacts.

Setting Call Filtering

???Some Cntcs sets your phone to notify you only of phone calls from numbers you select from Contacts.

3If you set the Phone option to Some Cntcs, select up to 5 Contacts entries that contain phone numbers you want to be notified of calls from.

When you are finished, press Aunder Done.

4To set filtering options for Private calls and group calls, select Prvt/Grp.

???Off sets your phone to notify you of all Private calls and group calls.

???On sets your phone to ignore all Private calls and group calls.

5To set filtering options for call alerts, select

Alerts.

???Off sets your phone to notify you of all call alerts.

???On sets your phone to ignore all call alerts.

6To set filtering options for message notifications, select Notifications.

???Off sets your phone to notify you of all messages.

???Voice Messages sets your phone not to sound a tone or vibrate when you receive voice messages.

115

Profiles

???Text Messages sets your phone not to sound a tone or vibrate when you receive text messages.

???All sets your phone not to sound a tone or vibrate when you receive any message.

Note: When you receive a type of message you have set not to sound a tone or vibrate, the message notification screen appears as usual.

7 Press A under Done.

116

Shortcuts

Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time.

Creating a Shortcut

Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts.

1Go to the menu item you want to create a shortcut for.

For example, if you want to create a shortcut to the screen for creating a new Contacts entry: From the main menu, select Contacts, then highlight [New Contact].

2Press and hold m until a confirmation screen appears.

3Press O or press Aunder Yes.

4Select Key.

5Press the number key you want to assign to the shortcut.

6Press O.

7If you want to record a voice name for the shortcut: Select Voice. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone.

8Press A under Done.

9If the number key you chose is already assigned to a shortcut, a prompt appears asking if you want to replace the existing shortcut.

Press A under Yes to replace the existing shortcut. -or-

Press A under No if you want to keep the existing shortcut and assign another number key to the shortcut.

Using a Shortcut

If you know the shortcut number:

1From the idle screen, press m.

2On your keypad, press the number assigned to the shortcut.

If you do not know the shortcut number:

1 From the main menu, select Shortcuts.

117

Shortcuts

2Scroll to the shortcut you want to use. -or-

If you assigned a voice name to the shortcut: Press and hold t. Say the voice name into your phone. The shortcut with that voice name is then highlighted.

3Press O.

Editing a Shortcut

To change the number assigned to a shortcut:

1From the main menu, select Shortcuts.

2With any shortcut highlighted, press m.

3Select Reorder.

4Scroll to the shortcut you want to move.

5Press A under Grab.

6Scroll to the place where you want the shortcut to appear.

7Press A under Insert.

8Repeat step 4 through step 7 for all the items you want to move.

9Press A under Done.

To change the number or voice name assigned to a shortcut:

1From the main menu, select Shortcuts.

2Highlight any shortcut.

3Press A under Edit.

4With Key or Voice highlighted, press O to change assignments.

Deleting Shortcuts

To delete a shortcut:

1From the main menu, select Shortcuts.

2Scroll to the shortcut you want to delete.

3Press m.

4Select Delete.

5Press O or press Aunder Yes to confirm.

To delete all shortcuts:

1From the main menu, select Shortcuts.

2With any shortcut highlighted, press m.

3Select Delete All.

4Press O or press Aunder Yes to confirm.

118

Using a Headset

If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time:

1From the main menu, select Settings > Advanced > Headset/Spkr.

2Select HdsetOnly to send incoming sound to the headset only. -or-

Select Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker.

Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends

incoming sound to the headset and does not end the call. See ???Setting Flip Actions??? on page 43.

Attaching a Headset

1Lift the audio jack cover.

2Insert the headset connector firmly into the audio jack. You may have to rotate the headset connector until it fits securely into the audio jack.

Using a Remote PTT Button

If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT button for phone calls and Private calls.

For phone calls, use the remote PTT button to answer calls, switch between calls, and end calls. Hold the remote PTT button for less than 2 seconds to answer calls and switch between calls. Hold the remote PTT button for more than 2 seconds to end calls.

For Private calls, use the remote PTT button as you would the PTT button on your phone.

Note: When using a headset, the PTT button on your phone works the same way as when you are not using a headset. Sounds associated with Private calls and group calls are heard through the headset.

119

Understanding Status

Messages

You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages.

Please Try Later This service is temporarily not available. Please try again later.

120

121

Safety and General

Information

IMPORTANT INFORMATION ON SAFE AND

EFFICIENT OPERATION.

READ THIS INFORMATION BEFORE USING

YOUR INTEGRATED MULTI-SERVICE

PORTABLE RADIO.

RF Operational

Characteristics

Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.

Portable Radio Product

Operation and EME Exposure

Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):

???United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.

???American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992.

???Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1999 Edition.

???International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.

???Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.

???Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003.

???ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) ???additional requirements for SMR, cellular and PCS product certification.???

To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:

122

Portable Radio Product Operation and EME Exposure

Phone Operation

When placing or receiving a phone call, hold your radio product as you would a wireline telephone.

Speak directly into the microphone.

???Phone or Two-way radio mode: one inch (2.5 cm)

???Data operation using any data feature with or without an accessory cable: one inch (2.5 cm)

Two-way radio operation

When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.

Body-worn operation

To maintain compliance with FCC RF exposure guidelines, if you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines. If you do not use a Motorola approved body-worn accessory and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, then ensure the antenna and the radio product are kept the following minimum distances from the body when transmitting

Antenna Care

Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio product and may violate FCC regulations.

DO NOT hold the antenna when the radio product is ???IN USE???. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed.

Approved Accessories

For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/iden.

123

Safety and General Information

ALL MODELS WITH FCC ID AZ489FT5833 MEET THE

GOVERNMENT???S REQUIREMENTS FOR EXPOSURE

TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the

body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.93 W/kg and when tested on the body, as described in this user guide, is 1.46 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.)2

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID AZ489FT5833.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.

1In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give

additional protection for the public and to account for any variations in measurements.

2The SAR information reported to the FCC includes the FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.

124

Electro Magnetic

Interference/Compatibility

Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility.

Facilities

To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.

Aircraft

When instructed to do so, turn off your radio product when on board an aircraft. Any use of a radio product must be in accordance with applicable regulations per airline crew instructions.

Electro Magnetic Interference/Compatibility

Medical Devices

Pacemakers

The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug Administration.

Persons with pacemakers should:

???ALWAYS keep the radio product more than 6 inches (15 cm) from their pacemaker when the radio product is turned ON.

???Not carry the radio product in a breast pocket.

???Use the ear opposite the pacemaker to minimize the potential for interference.

???Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place.

Hearing Aids

Some digital wireless radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.

125

Safety and General Information

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.

Use While Driving

Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.

When using the radio product while driving, please:

???Give full attention to driving and to the road.

???Use hands-free operation, if available.

???Pull off the road and park before making or answering a call if driving conditions so require.

Do not place a portable radio product in the area over the air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio product may be propelled with great force and cause serious injury to occupants of the vehicle.

Potentially Explosive Atmospheres

Turn off your radio product prior to entering any area with a potentially explosive atmosphere, unless it is a radio product type especially qualified for use in such areas as ???Intrinsically Safe??? (for example, Factory Mutual, CSA, or UL approved). Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.

Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such

126

as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: ???Turn off two-way radio???. Obey all signs and instructions.

All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. To reduce the risk of injury, batteries should not be exposed to fire, disassembled, or crushed.

Operational Cautions

Cleaning and Drying Considerations

Using a leather carry case may help protect the surfaces and help prevent liquids (e.g., rain) from entering into the interior of the radio product. This product is not water proof, and exposing the unit to liquids may result in permanent damage to the unit.

If your radio product interior gets wet, then do not try to accelerate drying with the use of an oven or a dryer as this will damage the radio product and void the warranty. Instead, do the following:

1Immediately power off the radio product.

2Remove Battery and SIM card (if so equipped) from radio product.

3Shake excess liquid from radio product.

4Place the radio product and battery in an area that is at room temperature and has good air flow.

5Let the radio product, battery, and SIM card dry for 72 hours before reconnecting the battery and/or powering on the radio product.

If the radio product does not work after following the steps listed above, contact your dealer for servicing information.

127

Safety and General Information

Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product.

Accessory Safety Information

Important: Save these accessory safety instructions.

???Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.

???Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.

Warning: To reduce the risk of injury,

!charge only the rechargeable batteries described in ???Battery??? on page 3. Other types of batteries may burst, causing personal injury and damage.

???To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet.

???Do not operate any battery charger with a damaged cord or plug ??? replace them immediately.

???Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use.

???Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons.

???Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.

???An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:

???The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.

???The extension cord is properly wired and in good electrical condition.

128

Accessory Safety Information

???The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.

???Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician.

???Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

???Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40??C (104??F).

???The output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger.

???The disconnection from the line voltage is made by unplugging the power supply from the AC receptacle.

???To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning.

For optimum charging performance, turn off the radio product while charging it in any battery charger.

129

MOTOROLA LIMITED

WARRANTY

Note: FOR IDEN SUBSCRIBER PRODUCTS,

ACCESSORIES AND SOFTWARE

PURCHASED IN THE UNITED STATES

OR CANADA

What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets ("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software contained on CD-Roms or other tangible media and sold for use with these Products ("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below.

This limited warranty is a consumer's exclusive remedy, and applies as follows to new Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:

(e.g. CD-ROM, or floppy disk).

130

What is not covered? (Exclusions)

Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.

Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.

Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.

Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with

(a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded from coverage.

Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.

131

MOTOROLA LIMITED WARRANTY

Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty.

Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable.

What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.

How to Obtain Warranty Service or Other Information? To obtain service or information, please call:

Motorola iDEN Customer Services 1-800-453-0920 or 954-723-4910

TTY-877-483-2840

Or visit us online at http://www.motorola.com/iden/support

You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.

What Other Limitations Are There? ANY

IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

TO THE DURATION OF THIS LIMITED

WARRANTY, OTHERWISE THE REPAIR,

REPLACEMENT, OR REFUND AS PROVIDED

UNDER THIS EXPRESS LIMITED WARRANTY IS

THE EXCLUSIVE REMEDY OF THE

CONSUMER, AND IS PROVIDED IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OF

IMPLIED. IN NO EVENT SHALL MOTOROLA BE

LIABLE, WHETHER IN CONTRACT OR TORT

(INCLUDING NEGLIGENCE) FOR DAMAGES IN

EXCESS OF THE PURCHASE PRICE OF THE

132

PRODUCT, ACCESSORY OR SOFTWARE, OR

FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES OF ANY KIND, OR

LOSS OF REVENUE OR PROFITS, LOSS OF

BUSINESS, LOSS OF INFORMATION OR DATA,

SOFTWARE OR APPLICATIONS OR OTHER

FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE ABILITY OR INABILITY

TO USE THE PRODUCTS, ACCESSORIES OR

SOFTWARE TO THE FULL EXTENT THESE

DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.

Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola

software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.

133

Limited Warranty Motorola Communication Products (International)

Limited Warranty

Motorola

Communication

Products (International)

Note: This Warranty applies in Singapore and the Philippines.

I. What This Warranty Covers

and For How Long:

MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (???Product???) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:

Rechargeable Batteries will be replaced during the applicable warranty period if:

a.the battery capacity falls below 80% of rated capacity, or

b.the battery develops leakage.

MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA.

This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.

134

MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole, or any portion of the system not produced by MOTOROLA, under this warranty.

II. General Provisions:

This warranty sets forth the full extent of MOTOROLA???S responsibilities regarding the Product, Repair, replacement or refund of the purchase price, at MOTOROLA???S options, is the exclusive remedy. THIS WARRANTY IS GIVEN

IN LIEU OF ALL OTHER EXPRESS

WARRANTIES. IMPLIED WARRANTIES,

INLCUDING WITHOUT LIMITATION, IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED TO THE DURATION OF THIS LIMITED

WARRANTY TO THE FULL EXTENT SUCH MAY

BE DISCLAIMED BY LAW. IN NO EVENT SHALL

MOTOROLA BE LIABLE FOR DAMAGES IN

EXCESS OF THE PURCHASE PRICE OF THE

PRODUCT, FOR ANY LOSS OF USE, LOSS OF

TIME, INCONVENIENCE, COMMERCIAL LOSS,

LOST PROFITS OR SAVINGS OR OTHER

INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE SUCH PRODUCT, TO THE

FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.

III. How to Get Warranty Service:

You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service.

IV. What This Warranty Does

Not Cover:

a.Defects or damage resulting from use of the Product in other than its normal and customary manner.

135

Limited Warranty Motorola Communication Products (International)

b.Defects or damage from misuse, accident, water, or neglect.

c.Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.

d.Breakage or damage to antennas unless caused directly by defects in material workmanship.

e.A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment).

f.Product which has had the serial number removed or made illegible.

g.Rechargeable batteries if:

1.Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.

2.The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.

h.Freight costs to the repair depot.

i.A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with

MOTOROLA???S published specifications or the local type acceptance labeling in effect for the Product at the time the Product was initially distributed from MOTOROLA.

j.Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the Product.

k.Normal and customary wear and tear.

l.Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment.

VI. Patent and Software

Provisions:

MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:

a.That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;

b.That MOTOROLA will have sole control of the defense of such suit and all negotiations for its

136

settlement or compromise; and

c.Should the Product or parts become, or in MOTOROLA???S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.

MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.

Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.

137

Patent and Trademark

Information

MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ?? Reg. U.S. Pat. & Tm. Off. ?? 2004 Motorola, Inc. All rights reserved.

Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.

T9 is a trademark owned by Tegic

Communications.

T9?? Text Input Patent and Trademark Information

This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.

Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.

All other product names or services mentioned in this manual are the property of their respective trademark owners.

Software Copyright Notice

The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.

138

Index

Numerics

2-way radio 109

see also Private calls, group calls, and call alerts

3-way calling 41

A

Accessories 16 safety 128

Airplane mode 107 Audio recordings 71

playing 71

B

Backlight 107, 108

Java applications 107 Battery

care 5 charging 4, 5 door 3 inserting 4 safety 127

Baud rate 111

C

Call alerts 22 deleting 23 queue 22 receiving 22 responding 22, 23 sending 22 sorting 23 viewing 23

Call filtering 115 Call forwarding 38 all calls 38

missed calls 39 off 38

Call Timers 45

Call Waiting 40 off 40

Calls

3-way 41

answering automatically 109

answering with any key 18, 108

emergency 21 ending 18

entering number 19 from Datebook 103 from memo 49 from recent calls 27

group, see Group calls international 42 making 17

on hold 41 phone calls 17

Private calls 17, 42, 109 receiving 18

redialing 20, 108 remote PTT 119 Speed Dial 20 TTY, see TTY calls Turbo Dial 20 voice name 19

Camera 63

see also pictures picture options 63 setting up 66 taking pictures 63

Circuit data 46 Clock 108

139

Index

Contact information receiving 25, 77 Send via PTT 76 sending 76

Contacts 29 accessing 30 capacity 35 creating entries 30 deleting 35 editing entries 32 icons 29

iDEN Phonebook Manager

37

international numbers 36 pictures 29, 30, 31, 34, 65, 70 ring tones 29, 30, 31 searching 34

showing all entries 35 showing only Private IDs 34 SIM card 29

storing fast 32

storing from idle screen 32 storing from Memo 32, 49

storing from recent calls 26, 32

type 29

voice name 32

with non-i860 phones 37

D

Datebook 99

copying events 102 creating events 100 deleting events 102 editing events 102 profiles 102 reminders 103 setting up 104 viewing 99

Display

backlight 107, 108 contrast 107, 108 options 8

screen 8 Drafts 61

see also MOSMS messages, drafts

E

Email 29, 31, 46

Emergency calls 21

End key 2

F

Faxes receiving 46 sending 46

Flip action 17, 18, 43

G

GPS Enabled 90 almanac data 95 best results 93 emergency calls 21, 91 map software 97 privacy options 96 security 96

viewing location 92 GPS PIN 111

GPS, see GPS Enabled Group calls 44, 109

making 44 off 44 receiving 44

H

Handset, see phone

140

Headset 119

I

Icons Contacts 29 status 10 text entry 53

voice records 81

iDEN Phonebook Manager 37 Idle screen 8

creating MOSMS messages

60

storing to Contacts 32 International numbers 42

calling 42 storing 36

J

Java applications 84 backlight 107 deleting 85 memory 86

K

Keypad 2

locking 110

L

Language 108

Lists, see menus

M

Media center 68 audio recordings 71 deleting 72

forward locked 69 locking 72 memory 73 pictures 70 renaming 72 viewing 68

Memo 49

calling from 49 creating 49 editing 49

storing to Contacts 32, 49 viewing 49

Memory

Java applications 86 media center 73 MOSMS messages 62 ring tones 52

voice records 83 Menu key 2, 9 Menus 8

context-sensitive 2, 9 main menu 9

Message center 55, 57 see also messages MOSMS messages 59

Message notifications 55 setting options 55

Messages 55

see also voice mail, MOSMS messages, and SMS messages

receiving 55 MOSMS messages 58

creating 59 deleting 61, 62 drafts 61 memory 62 message center 59 quick notes 60 receiving 58 sending 59

sent messages 61

141

switching 112 temporary 113 viewing 112

Programming, over-the-air 7 PUK code 13

Q

Quick notes 60

see also MOSMS messages, Quick notes

R

Radio frequency 122 Recent calls 24, 27 call alerts 24

contact information 25 creating MOSMS messages

60

deleting 26 display time 111 pictures 26

storing to Contacts 26, 32 viewing 25

Redialing 20, 108 Ring tones 50

deleting 52

142

downloading 52

in Contacts 29, 30, 31, 51

memory 52 off 50 setting 50 vibrate 50

viewing assigned 51 Ringer 105

see also Ring tones off 105

S

Safety 122 accessory 128 battery 127 driving 145

electromagnetic interference

125

medical devices 125 radio frequency 122

Security 110 Send key 2 Send via PTT 74

see Pictures, sending contact information 76

My Info 76 pictures 74

setting for pictures 76 Service provider 16 Service, activating 6 Settings 108

resetting 111 Shortcuts

creating 117 deleting 118 editing 118 using 117

SIM card 3, 11, 13 Contacts 29 inserting 14 removing 15

with non-i860 phones 37 SIM PIN 12, 110

changing 12 default 12 entering 12 requirement 12 unblocking 13

SMS messages 55, 58

also see MOSMS messages

58

Speakerphone 20

Speed Dial 20, 30, 32

Status messages 120

T

T9 Text Input, see text entry Talkgroups 44, 109

Text display area 8 Text entry 53

database 53, 54 icons 53

mode 53 Word mode 53

Themes 105

Trademark information 138 TTY calls 46

baud rate 47 making 46 mode 47

on 47 Turbo Dial 20

143

144

Driving Safety Tips

???Safety is your most important call!???

Your Motorola wireless telephone gives you the powerful ability to communicate by voice ??? almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility. If you find it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the following tips:

???Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

???When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many Motorola Original hands-free accessories available today.

???Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.

???Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.

???If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a ???to do??? list or going through your address book takes attention away from your primary responsibility ??? driving safely.

???Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

???Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road.

145

Driving Safety Tips

???Your phone can perform many other functions besides allowing you to make and receive calls. Do not let these features distract you from driving. Use them only when it is safe to do so.

???Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.

???Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.

???Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.

146