CPEi 885 Series

User Manual

Table

of

Contents

Contents

Chapter 1: Desktop CPEi 885 User Guide

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Powerful Features in a Single Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Front of the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Back of the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Operating Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Chapter 2: Installation

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Before you Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Advanced Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Procedure to Log into the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Setup Wizard and Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Chapter 3: Basic Configuration

Personalize Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Password Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Device Time Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Device Name Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Restore Factory Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Internet Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

WiMAX Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Firewall Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Dynamic DNS Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Status Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Telephony Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Wi-Fi Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Chapter 4: Advanced Configuration

Port Forwarding Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Forwarding Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Local Address Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

DHCP Server Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Lease Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Lease Reservation Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Software Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

i

DEC 2010

Certificate Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

About Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Wi-Fi Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Chapter 5: Configuring TCP/IP

Configuring TCP/IP in Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Configuring TCP/IP in Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Chapter 6: Troubleshooting

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 A Computer Cannot Log On to the CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Cannot Connect to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Additional Troubleshooting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Chapter 7: Important Safety and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . 7-1

ii

DEC 2010

Chapter 1: Desktop CPEi 885 User Guide

Overview

Thank you for purchasing the Motorola CPE Indoor CPEi 885 desktop device. The Desktop CPEi 885 allows you to connect to the wireless world easily and seamlessly without complicated installation and setup procedures. In addition, it offers you the ability to make Voice over Internet Protocol (VoIP) calls.

The Desktop CPE indoor CPEi 885 device provides the user:

???Convenience - with easy plug and play functionality. Compact design.

???Control - remote management capability allows easy detection and authentication once the unit is set up.

???VoIP - two RJ11 ports allow for Voice over IP calls using your CPEi 885.

???Wi-Fi - wireless LAN

The features and the physical appearance of your Desktop CPEi 885 device may differ slightly from the illustration.

Figure 1-1: CPEi 885

For the most recent documentation, visit the Product Documentation page on

www.motorola.com/wimaxmanuals.

1-1

DEC 2010

Powerful Features in a Single Unit

The CPE device provides the following features:

???WiMAX Authentication

???WAN DHCP Client

???LAN DHCP Server

???Home Gateway Functions

???Firewall Protection

???Port Forwarding

???Wi-Fi

Front of the CPE

The front of the CPE unit contains LED Link/Activity indicators. The LEDs show the status of the initialization during and network connections during power up. The LEDs also indicate the signal strength, and if Wi-Fi is enabled.

Table 1-1 LED Indicator Interface

1-2

DEC 2010

Back of the CPE

The back of the CPE unit contains the RESET switch, WPS switch, DC Power Connector, Ethernet connector, Ethernet LED, Line 1 and Line 2 telephone ports.

Figure 1-2: CPE Ports and Connections

Table 1-2 Port Descriptions

Operating Information

Operating temperature for this unit is 0-40??C (32-104??F).

1-3

DEC 2010

This page intentionally left blank.

1-4

DEC 2010

Chapter 2: Installation

Overview

To install the Desktop CPEi 885 Series, review the following sections:

???Before You Begin

???Easy Setup

Before you Begin

Before you begin installation, check that you have received the following items with your Desktop CPEi 885:

Table 2-1 In the box with your CPE, you should have

In addition, you need:

???A computer

???An RJ-11 telephone cable (optional). Two RJ-11 telephone cables are required if your service provider has supplied you with two telephone numbers.

Easy Setup

The CPE is easily set up in your home. Basic installation equipment needed are the power adapter, Ethernet cable, a PC or laptop computer and the CPE device.

If you want to use the VoIP functionality, you need an RJ-11 phone cable and a telephone.

Perform the following tasks before attaching the power cord or powering up the unit:

???Stand the CPE on a flat surface.

???Plug the AC power adapter cord into an AC outlet.

???Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit.

???Plug the other end of the Ethernet cable into the Ethernet connector of your computer.

???To use VoIP functionality of the phone, plug one end of the phone line into the activated phone connector on the back of the unit. Phone line activation is dependent upon your service contract.

???Plug the other end of the phone line into the phone line connector of your telephone.

2-1

DEC 2010

Advanced Setup

The CPE can also be used to connect to a multi-port switch (hub) - purchased separately from the CPE. Connecting the CPE device to a hub allows you to connect more than one computer to your CPE device.

Procedure to Log into the CPE

Before you Begin Configuration

Some settings on your computer need to be verified or changed to ensure that your computer configuration can support the Desktop CPE.

Verify that the IP addresses and DNS settings are automatically generated in your Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the chapter titled ???Configuring TCP/IP??? for additional information.

Logging in to the CPE

Use the following procedure to log into the Desktop CPE:

1.On a computer that is connected to the Desktop CPE, open a web browser.

2.In the Address or Location field, type http://mywimax. and press ENTER to display the login screen.

Include the period (.) after http://mywimax. in order to access the login screen.

NOTE

Alternatively, you may enter the IP address: http://192.168.15.1 into the address field in order to gain access to your CPE. If you cannot access the CPE, refer to the chapter titled: Configuring TCP/IP for more information.

3.The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a password.

2-2

DEC 2010

Figure 2-1: Login Screen

4.In the Password field, type the password (default is motorola).

5.Click Login.

6.First time users see a pop-up box that states: ???The Wizard application will guide you through for the first time configuration???. Click OK button to continue.

7.Click the OK button to launch the wizard application.

Setup Wizard and Authentication

Step 1 - Change Password

Once you have launched the setup wizard, you are prompted to change your password. Motorola recommends using a password to protect your home network and CPE device. Passwords are case sensitive.

To change your password:

???Ensure the ???Enable Login Password Protection??? box is checked.

???Enter a New Login Password in the box. Passwords can be no more than 20 characters in length.

???Re-type your new password in the Confirm New Login Password box.

???Click Next.

If you forget your password, you can reset it back to the default (motorola) password. To reset the password, press and hold the reset button on the back of your CPE for 5 or more seconds. Before resetting the CPE, ensure that the power is ON.

Step 2 - Device Time

This screen allows you to set the time zone and to enable Daylight Savings Time (when applicable) for your location.

???Select the appropriate time zone for your location from the drop-down box.

2-3

DEC 2010

???Check the box that is called ???Auto Adjust for Daylight Savings Time??? if you live in a region that observes Daylight Savings Time. This box is checked by default.

???Click the Next button.

Step 3 - WiMAX Security

The WiMAX Security tab contains your authentication method. Check with your service provider to determine if they require a user name and password for authentication purposes.

???If the Authentication Method is EAP-TLS, no User Name and Password are required. Enter the Realm information supplied by your service provider. Click the Next button.

???If the Authentication Method is EAP-TTLS/MS-CHAPv2, enter a User Name and Password, and Realm information supplied by your Service Provider. Once you have entered the User Name/Password/Realm information, click the Next button.

???If you are unsure of the Authentication Method, select EAP-TLS (which is the default) and click the Next button.

Step 4 - Account

The Account tab allows you to manage Voice over IP (VoIP) related services. Please consult with your telephony service provider for these settings.

Click the Apply button when finished.

Congratulations! You have now completed the setup of your WiMAX connection. Click OK on the Congratulations! dialog box.

A status screen appears that shows Network status and telephony status. The Network Status screen provides any status associated with your WiMAX Wireless Broadband connection. The Telephony Status screen provides status of your telephony service.

???The Restart button is used to restart the device. The restart button is available on every screen.

???The Wizard button starts the set-up wizard over again.

???The Refresh button refreshes the screen with the current status.

???The Auto Refresh button allows the web browser to automatically refresh at the interval determined in the Control Panel menu.

2-4

DEC 2010

Figure 2-2: Status Screen

Restart Button

Figure 2-3: Restart Button

Restart Wizard Refresh Auto Refresh

2-5

DEC 2010

This page intentionally left blank.

2-6

DEC 2010

Chapter 3: Basic Configuration

Once the CPE setup has been completed, you can log in to your CPE from any computer on your home network. To log in type the device name in the address bar on your computer. The default device name is mywimax.

This section describes the PERSONALIZE, INTERNET, STATUS, and Wi-Fi basic Menus that are available.

Personalize Menu

The Personalize menu provides the following tabs:

???Password

???Device Time

???Device Name

???Restore Factory Settings

Figure 3-1: Personalize Menu

To Access the Personalize menu, click on the Tools symbol, then click on Personalize.

3-1

DEC 2010

Password Tab

The password tab allows you to enable/disable password protection. You can also change your password here. Be sure to click the Apply button when finished

.

Table 3-1 Password Tab

Device Time Tab

The Device Time tab allows you to establish the time zone for your location. It also allows you to automatically adjust for Daylight Savings Time if necessary. Be sure to click the Apply button when finished.

Table 3-2 Device Time Tab

Device Name Tab

The Device Name tab allows you to rename your CPE device. The Device Name is the name you enter on an internet browser address bar to access your CPE device. Be sure to click the Apply button when finished.

Table 3-3 Device Name Tab

3-2

DEC 2010

Restore Factory Settings Tab

The Restore Factory Settings Tab resets your CPE to the manufacturers default settings. Be sure to click the Apply button if you are sure that you want to reset factory settings.

Table 3-4 Restore Factory Settings Tab

Internet Menu

The Internet menu provides the following tabs:

???WiMAX Security

???Internet Protocol

???Firewall

???Dynamic DNS

Figure 3-2: Internet Menu

To access the Internet menu, click on the Computer icon, then click on Internet.

3-3

DEC 2010

WiMAX Security Tab

The WiMAX Security tab contains your authentication method. Check with your service provider to determine a user name and password are required for authentication purposes.

Table 3-5 WiMAX Security Tab

If your authentication method is EAP-TLS, then a User Name and Password are not necessary.

Click the Apply button.

Internet Protocol Tab

Please check with your service provider for these settings. If you are unsure of the settings, leave the default values set and click the Apply button.

If your service provider has instructed you to change any of these settings, be sure to click the Apply button when you are finished.

Firewall Tab

A firewall helps to protect your home network from unauthorized access. It also helps to manage authorized access from the internet to your CPE.

Table 3-6 Firewall Tab

3-4

DEC 2010

Table 3-6 Firewall Tab

Be sure to click the Apply button once you are finished.

Dynamic DNS Tab

Dynamic Domain Name Service (DDNS) allows a user with a non-static IP address to keep their domain name associated with an ever changing IP address. As an example, DDNS is used when you are hosting your own website.

Table 3-7 Dynamic DNS Tab

Be sure to click the Apply button once you are finished.

Status Menu

The Status menu provides the following tabs:

???Network

???Telephony

3-5

DEC 2010

Figure 3-3: Status Menu

Network Tab

The Network tab provides any status associated with your WiMAX Wireless Broadband connection.

Telephony Tab

The Telephony tab provides any status associated with your telephony connection.

Telephony Menu

The telephony menu allows you to manage your Voice over Internet Protocol (VoIP) services.

The Telephony menu provides the following tabs:

???Account

???Ring Tone

???Caller ID

???Call Forwarding

???Voice Mail

???Special Numbers

3-6

DEC 2010

Figure 3-4: Telephony Menu

Account Tab

Please consult with your service provider for these settings. The Account Tab contains the following settings:

Table 3-8 Account Tab

entered in the field from the previous step.

Be sure to click the Apply button once you have made changes.

3-7

DEC 2010

NOTE

Support for the following VoIP features is dependent upon your service contract.

Ring Tone Tab

The Ring Tone tab allows you to customize ring tones for your telephone(s).

NOTE

You need a phone connected to your CPE to hear ring tones.

Table 3-9 Ring Tone Tab

Be sure to click the Apply button once you have made changes.

Caller ID Tab

The Caller ID tab allows you to manage the Caller ID functions for your telephones:

Table 3-10 Caller ID Tab

3-8

DEC 2010

Table 3-10 Caller ID Tab

Be sure to click the Apply button once you have made changes.

Call Forwarding Tab

The Call Forwarding tab allows you to manage the call forwarding features for your telephone(s). The Call Forwarding tab contains the following:

Table 3-11 Call Forwarding Tab

3-9

DEC 2010

Table 3-11 Call Forwarding Tab

Be sure to click the Apply button once you have made changes.

Voice Mail Tab

The voice mail tab allows you to see the status of your voice mail.

Please contact your service provider to activate the voice mail feature if it is not already active. The Voice Mail Tab contains the following:

Table 3-12 Voice Mail Tab

Be sure to click the Apply button once you have made changes.

3-10

DEC 2010

Special Number Tab

The Special Number tab provides a list of special dialing numbers for your VoIP Phone Service. The Special Number Tab contains the following:

Table 3-13 Special Number Tab

3-11

DEC 2010

Table 3-13 Special Number Tab

3-12

DEC 2010

Wi-Fi

The Wi-Fi basic menu helps manage the Wi-Fi related configurations. This menu includes Basic, and Security menus. For the Advanced settings, refer to the Advanced Configuration chapter ???Wi-Fi Advanced??? on page 4 - 7.

Figure 3-5: Wi-Fi Basic Menu

Wi-Fi Menu

Wi-Fi Basic (Wireless LAN) network settings are configured at this menu which includes:

Table 3-14 Wi-Fi Basic

To access the Wi-Fi menu, click on the Wi-Fi icon, then click on Wi-Fi.

3-13

DEC 2010

Table 3-14 Wi-Fi Basic

Wi-Fi Security

The Wi-Fi Security menu enables you to choose the wireless LAN security protocol to enable authentication and secure data transmission on the Wi-Fi network.

NOTE

???Make sure the selected network security protocol is supported by the wireless devices on the network.

???Wi-Fi security is disabled by default. Use this Wi-Fi Security menu to manually enable Wi-Fi security.

3-14

DEC 2010

WEP Configuration

Table 3-15 WEP Configuration

WPA/WPA2 Configuration

Manage WPA/WPA2 security protocol settings. Underneath WPA/WPA2 Configuration.

Table 3-16 WPA/WPA2 Menu Selections

3-15

DEC 2010

Figure 3-5: Wi-Fi Security

Wi-Fi Protected Setup (WPS)

Your CPEi 885 supports Wi-Fi Protected Setup (WPS) to simplify the setup of your wireless security. WPS can be used to configure client devices such as wireless adapters in laptop computers that support WPS. If your client devices do not support WPS, you will have to manually configure those devices. In order to use WPS to set up your client devices, access the security section of the Wi-Fi configuration by clicking on the Wi-Fi icon, then clicking on Security. Before you begin, you should configure the security settings in the CPEi 885 as described in the section above before continuing.

NOTE If you have client devices that do not support Wi-Fi Protected Setup, note the wireless settings, and then manually configure those client devices.

There are two primary options available when utilizing WPS. Use the option below that applies to the client device you are configuring. NOTE: WPS configures one client device at a time. Repeat the procedure for each client device that supports WPS.

Option #1, Push Button Control (PBC)

Use this method if your client device has a WPS button. Note that the button may be a physical button located on the client device or a software button located on the client device setup screen.

???There are two options available with the PBC method on the CPEi885, hard ware button and software button.

???Hardware button PBC on the CPEi 885

-Locate the WPS button on the back of the CPEi885 and client device.

3-16

DEC 2010

-Press the WPS button on the back of the CPEi 885.

-Press the WPS button on the client device.

-The connection will be automatically established.

???Software button PBC on the CPEi 885

-Navigate to the Security page of the Wi-Fi section of the CPEi 885 GUI as detailed above.

-Select ???PBC??? at the WPS Method dialog box and select ???Apply???.

-Press the WPS button on the client device.

-The connection will be automatically established.

Option #2, Personal Identification Number (PIN)

Use this method if your client device has a WPS PIN number.

???Initiate the WPS PIN procedure on the client device per the manufacturer???s instructions.

???Navigate to the Security page of the Wi-Fi section of the CPEi885 GUI as detailed above.

???Make sure the ???PIN??? option is selected in the WPS Method dialog box in the Wi-Fi Security Screen.

???Enter the PIN number of the client device in the field on this screen.

???Click ???Apply??? on the CPEi885 GUI screen. This must be completed within 2 minutes of starting the procedure on the client device.

???The connection will be automatically established.

3-17

DEC 2010

This page intentionally left blank.

3-18

DEC 2010

Chapter 4: Advanced Configuration

The Advanced Configuration section describes the Port Forwarding, Local Address, and Control Panel menus.

Port Forwarding Menu

Port forwarding enables you to direct incoming traffic to specific LAN hosts (computers on your network) based on the protocol and port number. It is used to play Internet games or provide local services (such as web hosting) for a LAN group.

To access the Port Forwarding manu, click on the Computer icon, then click on Port Forwarding. The Port Forwarding menu provides the following tabs:

???Basic

???Forwarding

Figure 4-1: Port Forwarding

Table 4-1 Port Forwarding Menu

Be sure to click the Apply button once you have made changes.

4-1

DEC 2010

Forwarding Tab

Click the ADD button to create additional Port Forwarding rules. The Forwarding tab contains the following selections:

Table 4-2 Forwarding Tab

Be sure to click the Apply button once you have made changes.

Local Address Menu

The Local Address menu allows you to configure your Local Area Network (LAN) connections.

The Local Address menu provides the following tabs:

???DHCP Server

???Lease Status

???Lease Reservation

To access the Local Address menu, click on the Computer icon, then click on the

Local Address.

4-2

DEC 2010

Figure 4-2: Local Address Menu

DHCP Server Tab

The DHCP Server tab enables Dynamic Host Configuration Protocol (DHCP) server functionality on the LAN, allowing the router to dynamically assign lease IP addresses to clients that connect to it from the local network. The DHCP Server Tab contains the following selections:

Table 4-3 DHCP Server Tab

DEC 2010

Table 4-3 DHCP Server Tab

Be sure to click the Apply button once you have made changes.

Lease Status Tab

The Lease Status tab in the Local Address menu displays the active DHCP leases since the last reboot. The Lease Status Tab contains the following selections:

Table 4-4 Lease Status Tab

Be sure to click the Apply button once you have made changes.

Lease Reservation Tab

This tab allows you to manage the lease reservation so that the same client receives the same IP address each time. The Lease Reservation Tab contains the following selections:

4-4

DEC 2010

Table 4-5 Lease Reservation Tab

Be sure to click the Apply button once you have made changes.

Control Panel

The Control Panel sections allows you to view/update your software information.

The Control menu provides the following tabs:

???Software

???Certificate

???System

???About

4-5

DEC 2010

Figure 4-3: Control Panel Menu

Software Tab

The Software tab manages the software on your CPE device. It is also where you can upgrade device software.

Use the BROWSE button to browse your computer for additional software packages. Once you have located the software package/update you would like to add to your device, click the Upgrade button.

Select the software you would like to install and click the Install button.

If you would like to remove software, select the software package you would like to remove and click Uninstall.

Certificate Tab

The Certificate tab is where you view the certificates that are stored on the device.

System Tab

This tab allows you to manage additional features of your CPE device.

4-6

DEC 2010

Table 4-6 System Tab

About Tab

The About Tab displays basic properties of your CPE device such as: Product Name, Model ID, Hardware Version, Serial Number, and the WiMAX MAC Address.

Wi-Fi Advanced

The Wi-Fi Advanced menu provides the following field settings:

Table 4-7 Wi-Fi Advanced Menu

4-7

DEC 2010

Table 4-7 Wi-Fi Advanced Menu

4-8

DEC 2010

Table 4-7 Wi-Fi Advanced Menu

4-9

DEC 2010

This page intentionally left blank.

4-10

DEC 2010

Chapter 5: Configuring TCP/IP

This section contains two examples of configuring TCP/IP in a Windows environment. Most computers already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is set up. Configure all client computers on your network for TCP/IP (the protocol that controls communication among computers). Two examples are provided in this document:

???Configuring TCP/IP in Windows XP

???Configuring TCP/IP in Windows Vista

NOTE

Follow the instructions in your computer user manual for other Operating

Systems.

Configuring TCP/IP in Windows XP

1.On the Windows desktop, click Start to display the Start window:

Figure 5-1: Windows XP Start Window

2.Click Control Panel to display the Control Panel window. The display varies, depending on your Windows XP view options. If the display is a Category view as shown in Figure 5-2, continue with Step 3. Otherwise, skip to Step 5.

5-1

DEC 2010

Figure 5-2: Control Panel

3.Click Network and Internet Connections to display the Network and Internet Connections window:

Figure 5-3: Network and Internet Connections

4.Click Network Connections. Skip to Step 6.

5.If a classic view like Figure 5-4 is displayed, double-click Network Connections to display the LAN or High-speed Internet connections.

5-2

DEC 2010

Figure 5-4: Control Panel Classic View

6.Right-click the Local Area Connection. If more than one connection is displayed, be sure to select the one for your network interface.

Figure 5-5: Network Connections

7.Select Properties from the pop-up menu to display the Local Area Connection Properties window:

5-3

DEC 2010

Figure 5-6: Local Area Connection Properties

8.On the Local Area Connection Properties window, select Internet Protocol (TCP/ IP) if it is not selected.

9.Click Properties to display the Internet Protocol (TCP/IP) Properties window.

Figure 5-7: Internet Protocol (TCP/IP) Properties

10.Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected.

11.Click OK to close the TCP/IP Properties window.

5-4

DEC 2010

Configuring TCP/IP in Windows Vista

1.On the Windows desktop, click the Windows Logo on the left bottom corner to display the Start window. Then click Network.

Figure 5-8: Network selection

2.When the Network windows appears, click the Network and Sharing Center from the action bar on the top of the window.

5-5

DEC 2010

Figure 5-9: Network and Sharing Center

3.After you click the Network and Sharing Center, the Network and Sharing Center window displays. Follow by clicking the Manage Network Connection from the task bar.

Figure 5-10:

4.The network connections appear. Drag your mouse to the Local Area Connection and right click the mouse button. A series of tasks display. Click Properties.

5-6

DEC 2010

Figure 5-11: Local Area Connection selection

Figure 5-12: Properties selection

5.A series of protocols appear. Among them, check the Internet Protocol Version 4 (TCP/IPv4) and click Properties.

5-7

DEC 2010

Figure 5-13: Internet Protocol Version 4 (TCP/IPv4) properties selection

6.At TCP/IPv4 Properties window, check Obtain an IP address automatically, and

Obtain DNS server address automatically. Click OK to save the settings.

5-8

DEC 2010

Figure 5-14: Internet Protocol Version 4 (TCP/IPv4) Properties window

7.When you have completed the setting updates, click OK to exit.

5-9

DEC 2010

This page intentionally left blank.

5-10

DEC 2010

Chapter 6: Troubleshooting

Power

???Check that the AC power adapter is properly plugged into the electrical outlet and into the Desktop CPE.

???Check that the electrical outlet is working.

A Computer Cannot Log On to the CPE

Check that the Ethernet cable is properly connected to the Desktop CPE unit and the computer.

Cannot Connect to the Internet

???Check the Desktop CPE connection status from the Web Interface, refer to the Connection Status section to verify the connection status.

???If the Desktop CPE connection is down, and the gateway has not received an IP for 5 minutes to 10 minutes:

-Re-Run the Setup Wizard.

-If the Setup Wizard does not help, then reset the Desktop CPE using the reset button.

Additional Troubleshooting Help

Contact your service provider for additional help.

6-1

DEC 2010

This page intentionally left blank.

6-2

DEC 2010

Chapter 7: Important Safety and Legal

Information

Your Motorola WiMAX Wireless Broadband Gateway is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy. Please see the Regulatory Guide included in the device packaging.

7-1

DEC 2010