OWNER???S MANUAL

SuperSign Lite/W/V

Please read this manual carefully before operating your set and retain it for future reference.

www.lgecommercial.com

i

Copyright

Contents and programs in this software user guide are subject to the Copyright law, the Computer Programs Protection Act, and applicable international treaties. The user guide's contents and programs may be used only under a License Agreement with LG Electronics, and may only be used or copied in accordance with the License Agreement. All or part of this user guide may not be transmitted, copied, distributed, utilized for derivative works using electronic, mechanical, or recording devices without the prior written consent of LG Electronics.

Copyright ?? 2011 LG Electronics. All rights reserved. Twin Tower, Yeouido-dong 20, Yeongdeungpo-gu, Seoul

Registered Trademarks

SuperSign is a registered trademark of LG Electronics. All other names of products and compa- nies are trademarks of the respective owners, and are used as references only.

About the User Guide

Please read through this user guide before using the SuperSign solution.

Make it available at all times by keeping a copy close by for reference.

Notational Convention

???Keyboard input required to perform functions is in bold.

Example: <Esc> key

???Keyboard input with more than one key is combined with + and in bold.

Example: <Ctrl+C> keys

Program UI Notation

???Button controls shown on the program screen are in bold.

Example: [OK], [Save]

???Names of options shown on the program screen are in bold.

Example: Start, All Programs

ENGLISH

ii

MEMO

ENGLISH

TABLE OF CONTENTS iii

Contents

1 OVERVIEW

1 Introduction to SuperSign

1 Components of SuperSign

1 - Display

1 - SuperSign Player

1- SuperSign Manager

2Functions Available in SuperSign Versions

3SUPERSIGN PLAYER

3Using the SuperSign Player

3- Signage Mode (Video Mode)

4- Tray Icon

4 - Tray Menu

4- Overview of the SuperSign Player

5Settings

5- Log in to Settings Menu

6- Network Setup

12- Screen

13- Password

15- Enhanced Write Filter (EWF)

16- Initialize S/W

17- Info.

18- USB AutoPlay

19- Language Options and Regional Settings

21 SUPERSIGN MANAGER

21 System Requirements

21- Server

21- Client

22Creating the User Account

23Log in/Log out

23- Logging In

24- Logging Out

25Home

25- Home Window Layout and Functions

26- Dashboard Settings

28- Software Update Notification Function

29Content

29- Content Window Layout and Functions

31- Loading Content

32- Content Creation

43- Saving Content

43- Editing Content

50- Content Management

51- PC Editor

73- AutoPlaying schedule files

74Player

74- Player Window Layout and Functions

ENGLISH

iv TABLE OF CONTENTS

ENGLISH

76- Player Search

77- Player Control

83- Creating Tiles

85- Player Management

86 User

86- User Window Layout and Functions

87- User Account Registration

88- User Account View

89- User Account Management

90Distribution

90- Distribution Window Layout and Functions

92- Creating Content Distribution Files

95- Creating Schedule Distribution Files

98- Creating VideoWall Distribution File

111 - Distribution Details Management

115 Message

118Log report

119Setup

119- Profile

120- Role

124- Server

125- System

126- Info.

127 APPENDIX

127SuperSign Network Connection

127- LAN Connection

128- Internet Connection

129- Wireless Connection

129- Available Ports

130Required Software and United Codec

130- Required Software

131- SuperSign File Support

131- Unified Codecs

132Microsoft Windows Embedded Standard Constraints

132Changing Primary/Secondary Display

133Frequently Asked Questions

135List of Monitor/TV Models Supported by SuperSign

135 - 1. List of Monitor Models

137 - 2. List of TV Models

OVERVIEW 1

Overview

The brief introduction and components of the SuperSign Lite/W/V are described below.

Introduction to SuperSign

The SuperSign is a network-based solution for digital advertising communications developed by LG Electronics. It is a program for integrated management of the SuperSign solution, providing support for digital media creation and management, content deployment, video play, and remote control. The SuperSign W solution includes the Display, SuperSign Player (hardware and soft- ware), and SuperSign Manager as its components.

Components of SuperSign

Display

The Display is connected to the SuperSign Player (media player) to display advertising content, and supports most LCD monitors/TV displays using the LG RS232C protocol. You can control monitor/TV functions (e.g. brightness, resolution, and sound) of the monitors/TVs supporting LG RS232C protocol by using the SuperSign Manager.

SuperSign Player

The SuperSign Player consists of a media player (hardware), and the SuperSign Player software which is installed on the media player. The media player comes in two types, box type (NC/ NA1000 series) and a built-in type (NC/NA2000 series).

SuperSign Manager

The SuperSign solution provides the SuperSign Manager, an all-in-one management program that allows you to manage the display and media player, and create and distribute media. Super-

Sign Manager is embedded with a client-side PC Editor which is capable of creating and editing content, and a server-side Web Editor.

ENGLISH

ENGLISH

2 OVERVIEW

Functions Available in SuperSign Versions

Some functions may not be available depending on the SuperSign version. Please refer to the table below.

The SuperSign Lite is a package distributed free of charge for content authoring and basic con- trols. If you purchase SuperSign W or SuperSign V, you can use more features.

SuperSign Player 3

SuperSign Player

The SuperSign Player is a software program used to play digital signage files stored in the LG Digital Signage Media Player. You can play media files, such as videos, images, music, flash, and documents, transmitted from the SuperSign Manager using the SuperSign Player.

NOTE

???SuperSign Player is a built-in software program installed in the Media Player. Start the Media Player and check whether SuperSign Player has been installed.

If the initial window of the SuperSign Player does not appear, check that the monitor is turned on.

If the monitor is turned on, make sure that the cables between the Media Player and the monitor are properly connected.

???See the SuperSign file support.

???You can go to the desktop by pressing <Esc> on the initial SuperSign Player screen.

ENGLISH

Using the SuperSign Player

Signage Mode (Video Mode)

If the Media Player is turned on and the operating system is booted completely, SuperSign Player runs automatically. The SuperSign Player auto-runs schedules when it starts. The Signage mode refers to a mode in which pre-distributed videos are played on a schedule.

NOTE

???When the SuperSign Player restarts, it auto-runs the advertising content according to the schedule last transmitted. For more information, see ???Schedule??? on page 62.

???Playing more than one full HD video with other media file may slow down playback.

???Placing a message or text on more than two videos may cause a flicker.

???When the PowerDVD is removed from the SuperSign Player with the PowerDVD SE installed, videos encoded to H.264, MPEG-2 and WMV are played without hardware acceleration.

???Using a transition effect on a full-HD picture, or more than two pictures, may slow down the speed of play.

???When you change the time zone in Windows, restart the SuperSign Player to apply the changes.

???It is recommended to use videos encoded to H.264 (AVC).

???The video with resolutions above full-HD (1920*1080) may not be played properly.

ENGLISH

4 SuperSign Player

Tray Icon

Pressing <Esc> while playing a video in the Signage mode stops the video and takes the user to the desktop. The SuperSign Player tray icon is in the bottom right side of the desktop.

Tray Menu

Right-clicking the SuperSign Player tray icon () in the bottom right side of the desktop prompts the Tray Menu to appear.

Overview of the SuperSign Player

Hovering the mouse pointer over the SuperSign Player tray icon for 5 seconds displays the brief SuperSign Player information.

SuperSign Player 5

Settings

You can adjust the SuperSign Player settings to the user environment.

Log in to Settings Menu

Please log in to set the program environment.

1On the Windows taskbar, right-click the SuperSign Player icon ().

???The tray menu appears as shown below.

2Click Setup on the tray menu.

???The Password window appears.

???The default password of the SuperSign Player is ???0000.???

3Enter the password and click the [OK] button.

???The SuperSign Player menu window appears.

NOTE

???The user can change the password. For more information on the password setting, see 13 Page, ???Password???.

ENGLISH

ENGLISH

6 SuperSign Player

Network Setup

The Network menu allows you to set the player IP (the IP address of the media player where SuperSign Player is installed) and the server IP (the IP address of the computer where SuperSign Manager is installed).

Player Name Setting

The default name of the player is the same as the MAC address for the network device of the Media Player. If required, you can change the name.

1In the SuperSign Player menu, click Network > Player Name setting.

2Enter a new name for the player in the field.

3Click the [Save] button.

???The player name is now changed.

SuperSign Player 7

NIC Setting

You can select a network card to use for the network connections. If multiple network cards are installed, select the one you want to use.

ENGLISH

1In the SuperSign Player menu, click Network > NIC setting.

2Select a network card you want to use.

NOTE

???During startup, the SuperSign Player will automatically detect an available network interface card.

8 SuperSign Player

Player IP Setting

In the Player IP setting menu, you can set the IP address of the media player. It is set to Dynamic

IP by default.

ENGLISH

1In the SuperSign Player menu, click Network > Player IP setting.

2Select the player IP setting mode you require.

3If you select Static IP, enter an IP address you require.

???If you select Dynamic IP, the IP address is automatically assigned.

4Click the [Save] button.

Server IP Setting

The Server IP setting menu is for the PC (server) settings, on which the SuperSign Manager is installed. It is set to Auto setting by default.

SuperSign Player 9

1In the SuperSign Player menu click, Network > Server IP setting.

2Select the server IP setting mode you want.

3If you select Manual setting, enter an IP address you require.

???If you select Auto setting, you can search for a player to connect it.

4Click the [Connection] button.

NOTE

??? Only the IPv4 is supported for setting the player and server???s IP address.

Network Connection Message

ENGLISH

10 SuperSign Player

ENGLISH

Wizard Setting

The SuperSign solution provides you with the SuperSign Network Setting Wizard, making the network setting fast and easy. Using the wizard, you can set the IP addresses of the SuperSign Player and SuperSign Manager according to the network environment.

CAUTION

???Install the SuperSign Manager program on the server PC before launching the wizard. If the SuperSign Manager is not installed, you cannot configure the network properly using the SuperSign???s Wizard setting.

1 In the SuperSign Player menu, click Network > Wizard setting.

2 Click the icon.

???The SuperSign Network Setup Wizard screen appears.

3Enter the SuperSign Player name.

???The Player name is used later on to identify multiple players.

4Select a network card to use for the network connection.

5Set the SuperSign Player???s IP address.

6 Set the IP address of the server where the SuperSign Manager is installed.

SuperSign Player 11

7The player is connected to the network cable.

???If the connection is not complete, please use the player search function on the SuperSign server.

CAUTION

???If the network settings fail, then please recheck the network connection status of the server and player.

ENGLISH

Checking the Network Connection

You can check the network connection status.

1On the computer where the SuperSign Manager is installed, go to Control Panel > Network Connections.

2Right-click Local Area Connection (or Wireless Network Connection) and select Properties.

???The Local Area Connection Properties window appears.

3Select the Internet Protocol (TCP/IP) and click the [Properties] button.

???The Internet Protocol (TCP/IP) Properties window appears.

4Check the default gateway and subnet mask settings.

12 SuperSign Player

Screen

In the Screen menu, you can set the view mode of the screen. The default setting is Landscape 0.

ENGLISH

1

2

In the SuperSign Player menu, click Screen > View.

Select the view mode you require.

SuperSign Player 13

Password

In the Password menu, you can set a login password to access the SuperSign Player menu.

Settings

You can select whether to use a password when accessing the SuperSign Player menu.

1In the SuperSign Player menu, click Password > Setting.

2Select whether to enable or disable the password.

ENGLISH

14 SuperSign Player

ENGLISH

Change

You can change the login password (4-digit number) used to access the SuperSign Player menu.

If the password is successfully changed, you can access the SuperSign Player menu using the new password.

1In the SuperSign Player menu, click Password > Change.

2Enter a new password in the Change field and click the [OK] button.

???The Verify field is activated.

3Enter the new password in the Verify field and click the [OK] button.

???Click the [OK] button ???when the Your password has been changed??? message appears.

SuperSign Player 15

Enhanced Write Filter (EWF)

The EWF protects the product???s file system against intentional damage or viruses.

ENGLISH

1

2

In the SuperSign Player menu, click EWF > Setting.

Select whether to enable or disable EWF.

NOTE

???For more information on the EWF, visit the Microsoft website.

???If EWF is set to ???Enable???, you cannot add, delete, or change the data stored on the C drive of the Media Player.

???You must set EWF to ???Disable??? when you install a new program in the Media Player.

???If EWF is set to ???Enable???, you cannot install new programs.

???Restart the system if you want to apply changes to the EWF setting.

???The settings in the SuperSign Player menu (Network, Screen, Password, and EWF) are not affected by the EWF and are not deleted from the system.

CAUTION

???When EWF is enabled, data stored on the C Drive will be deleted upon system startup.

Please save the data to the D drive.

16 SuperSign Player

Initialize S/W

You can reset the SuperSign Player to the factory settings.

3Click the [Yes] button when the Information window appears.

??? This resets SuperSign Player to the factory settings.

CAUTION

??? The network settings are not affected by the software reset.

SuperSign Player 17

Info.

You can check the SuperSign Player???s program status.

ENGLISH

1In the SuperSign Player menu, click [Info].

??? The information on the program appears.

18 SuperSign Player

ENGLISH

USB AutoPlay

If you connect a USB storage device to a SuperSign Player, a list of content files stored on the USB device will be automatically displayed. The selected content file can either be played, or saved on the SuperSign Player???s hard disk for playback.

CAUTION

???The content file downloaded to the ???AutoPlay??? folder will be deleted when the schedule is set.

NOTE

???If the USB playback list is not displayed automatically, press the blue button on the remote control, or the <F12> key on the keyboard, to display the content list.

???The SuperSign Player can only read from one USB storage device at a time; it cannot read from two or more USB storage devices simultaneously.

???You can also start playback of the content files stored on the USB device, by using the remote control for the monitor connected to the SuperSign Player. Use the blue button on the remote control.

???If you restart SuperSign Player, or select the tray icon, SuperSign mode, it remembers the last played item (the scheduled file) and plays it.

???When the scheduled playback of the file ends, the monitor switches to idle mode.

SuperSign Player 19

Language Options and Regional Settings

If you want to use SuperSign Player in other languages, you can change the language under Regional and Language Options in your operating system (Microsoft Windows XP Embedded).

To Change the Language:

1Disable EWF in <SuperSign Player Menu>.

2In Windows, select Start > Control Panel > Regional and Language Options.

3Choose the language you want to use as shown below.

4Re-install the SuperSign Player with the new language.

5Enable EWF in the <SuperSign Player Menu>.

CAUTION

SuperSign Manager and SuperSign Player should use the same language.

ENGLISH

20

MEMO

ENGLISH

SuperSign Server 21

SuperSign Manager

SuperSign Manager is an integrated management program supporting the network-based crea- tion and management of digital media, content distribution, video play, or remote control etc. SuperSign Manager is embedded with a client-side PC Editor which is capable of creating and editing content, and a server-side Web Editor.

ENGLISH

System Requirements

Please check the system requirements for proper operation.

Server

Client

22 SuperSign Server

ENGLISH

Creating the User Account

You can make a request for an account via the server.

1Go to Start > All Programs > SuperSign Lite/W/V.

??? The User Login window will appear.

2Click Create an account now to make an account request.

3Enter all required information.

4Click the [Save] button in the top left of the screen to save the information.

SuperSign Server 23

5 Click the [OK] button when the account creation complete message appears.

NOTE

???The account created by the user must first be approved by the server administrator. For more information on approving accounts, see 89 Page, "Approving User Accounts".

ENGLISH

Log in/Log out

You can find out how to log in to use the program, and how to log out to exit the program.

Logging In

1Enter the server address in the address field of the web browser.

???The program login screen will appear.

2Enter the user ID and password, and then click the [Sign In] button.

???The user ID and password can be saved by selecting the Remember ID checkbox. This means that next time you log in, the user ID and password will automatically be remem- bered. ID and Password are initialized to admin/000000.

24 SuperSign Server

ENGLISH

Logging Out

1Click in the top right corner of the screen.

??? The Login screen is displayed.

SuperSign Server 25

Home

On the main screen of the SuperSign, you can monitor the general system through the dash- board.

Home Window Layout and Functions

The following shows the layout and functions of the Home window.

???

???

???

???

ENGLISH

26 SuperSign Server

ENGLISH

Dashboard Settings

You can add or delete dashboard categories, and re-order them according to your own prefer- ence.

Adding Categories

1Click the [+Add] button at the center of the Home screen.

??? The dashboard appears.

2Click the checkbox next to the category you want to add.

???The dashboard category you selected is shown with a check mark.

NOTE

???The Approval Status, Notice Board and Last Modified User items are only available in the

SuperSign W and SuperSign V. To access these functions, Please purchase SuperSign W or SuperSign V.

SuperSign Server 27

3Click the blank area of the dashboard.

??? The dashboard category which you selected is added.

Deleting Categories

1Click the [+Add] button at the center of the Home screen.

???The dashboard appears.

2Select the checkbox next to the category you want to delete.

???The dashboard category you selected is unchecked.

3Click the blank area of the dashboard.

??? The deleted category disappears from the dashboard and the rest of the list moves up.

ENGLISH

Moving Categories

1Click the title bar of the category you want to move, and drag-and-drop it onto a desired area within the dashboard.

??? The categories in the dashboard are automatically re-sorted.

28 SuperSign Server

Software Update Notification Function

When a admin user access the Home screen, the notification window pops out if there are software updates available at www.lgecommercial.com

ENGLISH

1Displays the current version and the update version available.

2Click the update version to download a new version of the software. Then, save it on your PC to upgrade the SuperSign server.

3Click Change log to check the update history.

4Click the Don't show up today checkbox and select Close. Then, the update notification win- dow will not appear during the day.

SuperSign Server 29

Content

You can create advertising content using various templates and layouts.

SuperSign Manager provides a client-side PC Editor capable of creating and editing content, and a server-side Web Editor. This document describes the server-side Web Editor.

For details on the client-side PC Editor, see 43 Page, ???PC Editor???.

Content Window Layout and Functions

The following shows the layout and functions of the Content window.

ENGLISH

30 SuperSign Server

ENGLISH

CAUTION

???After editing the properties under Details, if you find the changes are not reflected, config- ure Internet browser options as follows:

Go to Tools > Internet Options > Browsing History > Settings and click "Every time I visit the webpage" under "Check for newer versions of stored pages".

3When the file import pop-up window appears, click the [Browse] button and select a file to import.

4After selecting a file path, click the [Save] button.

??? Once the file is open, the Editor switches to the Content window, displaying the file status

32 SuperSign Server

ENGLISH

Content Creation

Creating Content

You can easily provide desired advertising content.

1Click Content on the Menu tab at the top of the program.

2Click the [Create New] button in the top left of the Content window.

3Select the desired canvas settings.

???If you do not want to display the Canvas setting window after the settings are complete, select the Do not display on the next startup checkbox.

SuperSign Server 33

NOTE

???When you select a monitor or TV player, some functions are not available when editing content.

???For more information, see "Restrictions on monitor or TV player when editing content" on page 35.

4Click the [OK] button to complete the canvas settings.

??? The content edit window appears when the canvas settings are complete.

ENGLISH

34 SuperSign Server

5Select an item you want in the Library area.

???You can view the item details in the Property panel.

6Use the Tools panel to edit the selected item in a desired fashion.

???The Tools panel changes according to the selected item. For details on the tool functions, see 44 Page, ???Editing with the Tools Panel???.

7Click the [Save] button at the top of the Canvas to save the content created.

???You can view the content saved in the Content List.

SuperSign Server 35

Restrictions on monitor or TV player when editing content

When you use a monitor player to edit content, the following restrictions apply:

???Restrictions on External Input or TV

1.The external input zone is fixed at the bottom of the zone set.

(It is always placed as the last one.)

2.The content in the external input zone cannot be played simultaneously with the one in the video/music zone.

- If a video (or music) zone already exists, an external input zone cannot be added.

- If an external input zone already exists, a video (or music) zone cannot be added.

3.TV zones cannot be edited in overlap with other zones.

ENGLISH

36 SuperSign Server

Adding Media Files to the Library

??? The selected file is added to the library. Please note that only the media files stored in the local disk can be added to the library.

??? You can also add videos, flash, music, PDFs, and Office files to the library using the same method.

NOTE

???Adding media files to the Library is only available in the PC Editor.

???You can also select and drag the desired media file from Windows Explorer directly to the media library. The media file will then be automatically classified and stored in the cor- responding category.

In Windows 7, you can drag-and-drop files from Windows Explorer only when the ???User Account Control (UAC)??? is disabled.

Adding Library Media Files to Canvas

You can place the media files (photos, videos, music, PDFs, and Office files added to the Library) on the Canvas.

NOTE

???When you add and edit a media file on the Canvas, the media file is auto-locked. Auto- locked media files cannot be accessed by other users.

SuperSign Server 37

Adding media to a zone

You can create a custom layout using the [Zone] and [Text] buttons at the top of the Canvas.

1 In the content edit mode, click the [Zone] button at the top of the Canvas.

???

ENGLISH

2Drag-and-drop a media file added to the library on the zone.

??? The media file is added to the Canvas zone.

38 SuperSign Server

You can add a media file you selected directly on to the Canvas.

1Drag-and-drop a media file added to the library, on to the Canvas.

???The media is placed on to the Canvas with its area created automatically. You can change the size and location of the new area.

NOTE

???In the PC Editor, drag-and-dropping a media file, selected from the Windows Explorer onto the Canvas, automatically creates its media zone.

SuperSign Server 39

Adding Service Content

You can add online content (websites, RSS, and widgets) and date/time to the Canvas.

Adding websites

1In the Library area, click Service > Element > Web.

2Enter a website address (URL) and click the [Add] button.

???A web zone is created on to the Canvas.

3Place the website zone anywhere you want on the Canvas.

4Click the Preview from the quick menu at the bottom of the screen.

???You can see that the website zone is added.

5Set the web zone in the Tools panel.

???For more information on the Tools panel, see 44 Page, ???Editing with the Tools Panel???.

ENGLISH

Adding RSS feeds

1In the Library area, click Service > Element > RSS.

2Enter an RSS address and click the [Add] button.

???An RSS zone is created on the Canvas.

3Place the RSS zone anywhere you want on the Canvas.

4Click the Preview from the quick menu at the bottom of the screen.

???You can see that the RSS zone is added.

5Set the RSS zone in the Tools panel.

???For more information on the Tools panel, see 44 Page, ???Editing with the Tools Panel???.

NOTE

???You cannot add service content to a monitor or TV player during editing.

???The service and text zones can have a single media and text file, respectively.

???Really Simple Syndication (RSS) is a web feed format that allows subscription to new post- ings on a website. The website provides updates and new posts according to RSS, and users can receive such content through an RSS reader.

40 SuperSign Server

Adding widgets

??? For more information on the Tools panel, see 44 Page, ???Editing with the Tools Panel???.

Adding streaming media

1In the Library area, click Services > Element > Streaming.

2Select an item, video, or audio.

3Enter a streaming address (URI) and click the [Add] button.

???A streaming zone is created on the Canvas.

4Place the streaming zone anywhere you want on the Canvas.

5Click the Preview from the quick menu at the bottom of the screen.

???You can see that the streaming zone is added.

6Set the streaming zone in the Tools panel.

???For more information on the Tools panel, see 44 Page, ???Editing with the Tools Panel???.

NOTE

??? When you provide streaming services, please use Windows Media Encoder.

Adding dates

1In the Library area, click Service > Date/Time.

2Click the [Add Date] button in Date/Time or drag and drop a preferred date image into the canvas.

???A date zone is created on the Canvas.

3Place the date zone anywhere you want on the Canvas.

4Click the Preview from the quick menu at the bottom of the screen.

???A date zone is created on the Canvas.

5Set the date zone in the Tools panel.

???For more information on the Tools panel, see 44 Page, ???Editing with the Tools Panel???.

Adding Clip Art

1In the Library area, click Service > Clipart.

2Select a preferred clip art category and drag and drop a clip art into the canvas.

???The corresponding zone is created in the canvas.

3Place the clip art zone anywhere you want on the Canvas.

4Click the Preview from the quick menu at the bottom of the screen.

???The clip art zone is created in the canvas.

5Set the clip art zone in the Tools panel.

???For more information on the Tools panel, see 44 Page, "Editing with the Tools Panel".

Setting the Timeline

The timeline allows you to set the duration for each content clip so that your media can be played at the desired time. On the timeline, you can set the start time, duration, and the end time of the content in the zone. You can set the content to play for up to 12 hours.

How to Add a TV Zone

1In the case of TV content, you can add a TV zone.

2In the Library area, click Service > Element.

3Drag and drop the TV/input button onto the canvas to create a TV zone.

42 SuperSign Server

ENGLISH

SuperSign Server 43

Saving Content

Web Editor

PC Editor

1To save the content created on the local PC, click File > Save or Save as. To save it in the library of the server, click Server > Save or Save as.

???You can view the content saved in the Content List.

???To save a custom template you created, click File > Save as template.

???To save a template in the server, click Server > Save as template.

Editing Content

You can edit the media or service content added to the zone while creating the content.

CAUTION

???If you change the layout, all of the content you previously worked on will be deleted. Make sure you save the content before you change the layout.

???If you change the template, all of the content you previously worked on will be deleted. Make sure you save the template before you change the layout.

44 SuperSign Server

ENGLISH

Editing with the Tools Panel

Photo

NOTE

???With a transition effect, the minimum editing unit is 10 seconds.

???If no transition effect is applied, the minimum editing unit for the playback time is 3 sec- onds.

Videos

ENGLISH

Music

Document

46 SuperSign Server

Websites

ENGLISH

RSS

Text scroll ??? Text scroll: Sets the scroll direction of the text.

???Speed: Sets the scroll speed of the text.

RSS Feed ??? RSS Feed:Changes the address of the RSS feed to be connected.

???Title space: Sets the space of the RSS feed title.

???Update cycle: Sets the refresh interval of the connected RSS feed.

Streaming

ENGLISH

Date

48 SuperSign Server

ENGLISH

Time

Background

Zone

Text

NOTE

???Background color and opacity settings are not supported for web, streaming, and music zones.

???Transparency cannot be adjusted for the video zone.

???Background color, opacity, and zone order settings are not supported for TV and input zones.

50 SuperSign Server

Content Management

Approving Content

Rejecting Content

1Select the content you want to reject in the content details list.

??? The selected content is shown with a check mark.

2Click the [Rejected] button to reject the selected content.

??? Once the rejection is complete, or changes to .

Deleting Content

1Select the content you want to delete in the content details list.

???The selected content is shown with a check mark.

2Click the [Delete] button to delete the selected content.

3When the Confirm Delete window appears, click the [OK] button.

4When the deletion confirmation window appears, click the [OK] button.

???Once the deletion is complete, the deleted content will disappear from the details list.

SuperSign Server 51

PC Editor

Learn about the PC Editor, a local PC-based program for content creation.

Installing/Uninstalling PC Editor

Installing PC Editor

1Insert the CD provided with the Media Player package onto your computer.

???The install program runs automatically.

2On the main screen, click [SuperSign Editor].

3When the File Download pop-up appears, click the [Run] button.

4When the Security Warning pop-up appears, click the [Run] button.

5Select the language and click the [OK] button.

6Read the SuperSign Editor installation instructions and click the [Next] button.

7Select the installation path of the SuperSign Editor and click the [Install] button.

???The program installation begins. You can view the installation details if you click the [Show details] button whilst installing.

8When the Adobe AIR Setup pop-up appears, click the [I Agree] button.

9When the Adobe AIR installation is complete, click the [Finish] button.

10When the Install Adobe Flash Player Active X pop-up appears, click the [Install] button.

11When the Adobe Flash Player Active X installation is complete, click the [Done] button.

12When the SuperSign Editor installation is complete, click the [Finish] button.

NOTE

???If the Install program does not start automatically, go to the CD-ROM drive:

\SuperSign\SuperSign_Software\Application\ SuperSignEditor and run SuperSignEdi- tor_setup.exe manually.

???If you re-install the program without uninstalling it, you can choose to keep or initialize the data.

???If your operating system is Windows 7, you need to install/run the program as an adminis- trator to allow you to access the system.

ENGLISH

52 SuperSign Server

ENGLISH

Uninstalling PC Editor

??????Uninstalling with the uninstall program

1 On Windows, click Start > All Programs > SuperSign Editor > Uninstall SuperSign Editor.

2When the uninstall program starts, click the [Uninstall] button.

???The uninstallation begins. You can view the uninstallation details if you click the [Show details] button while uninstalling.

3Click the [Finish] button when the uninstallation is complete.

Uninstalling with the Control Panel

??????Windows XP, Windows 2003 Server

1Go to Start > Setup > Control Panel > Add/Remove Programs > SuperSign Editor.

2Click the [Uninstall] button.

??????Windows 7

1Go to Start > Setup > Control Panel > Programs > Uninstall a Program > SuperSign Edi- tor.

2Click the [Uninstall] button.

PC Editor Library Layout and Functions

???

???

SuperSign Server 53

ENGLISH

NOTE

??? The server-side Web Editor does not have the PC/Server switch tab.

54 SuperSign Server

ENGLISH

Transferring local files to the server

You can upload content and media files from the local library to the server.

1 Click the My computer tab in the Library.

2Select library files to upload to the server.

???Press and hold the <Shift> key to select multiple files at once.

3Click the [Send to the server] button.

???The [Send to the server] button is only enabled when you are logged into the server.

4When the Send to the server window appears, confirm the files to upload and click the [OK] button.

???When you upload the local library???s content to the server, the media files included in the content will also be uploaded.

SuperSign Server 55

5 When the upload is complete, click the Server tab in the library.

ENGLISH

6You can view the uploaded content in the server library.

???Please note that the disabled content will be enabled once you have approved it. For more information on approving content, see 50 Page, "Approving Content".

Transferring the files from the server to the local computer

You can download media files from the server library to the local computer.

1 Click the Server tab in the Library.

2Select the library files to download to the local computer.

??? Press and hold the <Shift> key to select multiple files at once.

56 SuperSign Server

3 Click the [Download] button.

ENGLISH

4When the Download pop-up appears, click the [OK] button.

???When you download the server library content to the local computer, the media files included in the content will also be downloaded.

???To change the download destination, go to Server > Download folder, and specify a desired location.

???Duplicate files will be ignored while downloading

5 When the download is complete, select the My computer tab in the Library.

6 You can view the downloaded content in the local library.

SuperSign Server 57

PC Editor Menu Layout and Functions

??????File

ENGLISH

??????Edit

58 SuperSign Server

??????View

ENGLISH

Content Edit ??? Timeline: Shows or hides the timeline. Window ??? Template/Library:Shows or hides the

template/library.

???Property/Tools: Shows or hides the properties/tools.

??????Settings

NOTE

???You can display an Office or PDF file (PowerPoint or PDF) on a monitor player or on a TV player only when the file has been registered in the PC editor.

???If the orientation of the Office or the PDF file displayed on a monitor or a TV is incorrect, try changing the Office Page settings and register the file again.

??????Help

??????Server

60 SuperSign Server

Connecting to the server

Viewing user rights

You can view the role and permissions of the user logged in.

1Click Server > User information.

2You can view the user rights when the User information window appears.

Server IP setting

You can set the server???s IP address.

1Click Settings > Server IP.

2Enter a Server IP address and click the [OK] button.

SuperSign Server 61

Setting the download folder

You can specify a local folder to save media when you download it from the Server.

USB AutoPlay

The USB AutoPlay function allows you to save your content in a USB storage device and play it in SuperSign Player. You can enable this function in Export of the Content Edit menu or in Export schedule of the Schedule menu.

??????AutoPlaying content files

You can auto-play content files in the SuperSign Player by saving them on a USB device.

1In the Content Edit menu, click File > Export.

-- The Export window appears.

2Select the root folder of the USB device as the Save Content destination. (For example, F:\, G:\)

3To send to the AutoPlay folder, click the AutoPlay checkbox.

4Click the [Export] button.

-- An AutoPlay folder is created in the root directory, and the content is saved.

5Connect the USB device containing the content, to the USB port of the media player. -- The content begins auto-playing.

62 SuperSign Server

ENGLISH

Schedule

You can create or modify a schedule to deploy the content.

Schedule Window Layout and Functions

The following shows the layout and functions of the Content window.

???Action buttons ??? [Create New]: Creates a schedule.

CAUTION

After editing the properties under Details, if you find the changes are not reflected, configure

Internet browser options as follows:

Go to Tools > Internet Options > Browsing History > Settings and click "Every time I visit the webpage" under "Check for newer versions of stored pages".

64 SuperSign Server

Creating New Schedules

4 To select a date, use the Date box at the top of the Schedule Edit Area.

??? Press the [???/???] button or to select a date.

View Calendar

5 Select content or media files you want in the library.

NOTE

???PPT/PDF/ODP files added to the server using the PC Editor can be selected from monitor/

TV type.

Schedule Cell

7 Set the item???s play duration in the Time setting.

???

???

8 To save the schedule, click the [Save] button.

Copying Schedule Cells

1 In the Schedule Edit mode, select a schedule cell to copy, and press <Ctrl+C>.

68 SuperSign Server

2Select an area to copy to, and press <Ctrl+V>.

??? The schedule cell is copied to the selected area.

ENGLISH

NOTE

???Pressing <Ctrl+V> without selecting a copy area after pressing <Ctrl+C>, displays a pop- up that prompts the user to select a copy location. Be sure to select a copy location, and then press <Ctrl+V> .

Moving Schedule Cells

1In the Schedule Edit mode, select a schedule cell to move, and drag-and-drop it onto a de- sired position.

??? The schedule cell is moved to the selected area.

SuperSign Server 69

Deleting Schedule Cells

2When the Confirm Delete pop-up appears, click the [OK] button.

??? The selected schedule cell is deleted.

70 SuperSign Server

Adjusting the Schedule Cell Time

Schedule Management

Viewing Schedules

1 Select a Sort By category you want at the top of the Schedule window.

SuperSign Server 71

ENGLISH

2Select a schedule to view in the Schedule list.

??? Items included in the selected schedule are shown in the item list.

??????

72 SuperSign Server

Approving Schedules

1Click the Non-approval category in the schedule list.

??? Schedules not been approved appear in the item list.

??? Alternatively, select a schedule item with shown in the item list.

2Select a schedule you want to approve in the schedule details list.

??? The selected schedule is shown with a check mark.

3Click the [Approve] button to approve the selected schedule.

??? Once the approval is complete, changes to .

Rejecting Schedules

1Select a schedule you want to reject in the schedule details list.

??? The selected schedule is shown with a check mark.

2Click the [Reject] button to reject the selected schedule.

??? Once the rejection is complete, or changes to .

Deleting Schedules

1Select a schedule you want to delete in the schedule details list.

???The selected schedule is shown with a check mark.

2Click the [Delete] button to delete the selected schedule.

3When the Confirm Delete window appears, click the [OK] button.

4When the deletion confirmation window appears, click the [OK] button.

???Once the deletion is complete, the deleted schedule will disappear from the item list.

SuperSign Server 73

Editing Schedules

1Select a schedule to edit in the Schedule List.

???The selected schedule appears in the item list.

2Hover the mouse over the schedule summary.

???The and buttons are enabled.

3Click the button.

???The window switches to an edit mode. When switching to editing mode, the current date is displayed by default.

NOTE

???When you edit a schedule, it is auto-locked. Auto-locked schedule files cannot be accessed by other users.

ENGLISH

AutoPlaying schedule files

You can auto-play schedule files in the SuperSign Player by saving them on a USB device.

1 In the Schedule menu, click .

-- The file download window appears.

2 Download the AutoPlay.zip file and unzip it.

-- Use a compression program that supports UTF-8 encoding, such as ALZip and WinRAR.

3Move the AutoPlay folder to a USB device.

4Connect the USB device, where schedule (AutoPlay) is stored, to the USB port of the media player.

-- The content begins auto-playing.

NOTE

???Content created using a template or layout provided by SuperSign will only be displayed normally on a 16:9 monitor. Otherwise, it will not be played correctly.

74 SuperSign Server

ENGLISH

Player

You can select a player for content play, or control the selected player.

Player Window Layout and Functions

The following shows the layout and functions of the Player window.

???Action buttons ??? [Player search]: Search players.

??? : Refresh the current display and status of the player, or browse a new player.

???[Control]: Opens the Control pop-up.

???[Delete]: Deletes a player.

???[Approve]: Approves a player not approved.

???[Reject]: Rejects a player not approved.

???[Tile]: Enables the Tile mode.

CAUTION

???After editing the properties under Details, if you find the changes are not reflected, config- ure Internet browser options as follows:

Go to Tools > Internet Options > Browsing History > Settings and click "Every time I visit the webpage" under "Check for newer versions of stored pages".

76 SuperSign Server

ENGLISH

Player Search

You can search for a preferred player.

1Click Player on the Menu tab located at the top.

2Click the [Player search] button in the top left side of the Player window.

3 When the device search window appears, enter the range of IP addresses to search for.

4Click the [Player search] button to start searching.

???Discovered players are registered as pending approval under the ???default??? group.

???For a newly added player, ???NEW??? is displayed next to it and it will disappear after one day.

SuperSign Server 77

Player Control

You can control the power and detail functions of player and display.

Turning Players On/Off

Turns the player power on/off.

1You can control the power by clicking the ON/OFF buttons in the player details list.

???The green button is displayed for players whose power is on; click the button to turn it off.

???The gray button is displayed for players whose poser is off; click the button to turn it on.

NOTE

??? TV only supports the power-off feature.

ENGLISH

78 SuperSign Server

Turning the Display On/Off

player is powered off, turn on the display's power first and follow the same procedure as above.

??? Monitor: For a monitor type player, turn on the player's power.

Controlling the Device Details

You can control a player and display in details.

1Select a player you want to control in the player details list.

???The selected player is shown with a check mark.

???To control individual displays under the player, click the checkbox next to the display you want to control in the Display list.

2Click the [Control] button at the top of the Player List.

??? The Control pop-up window appears.

SuperSign Server 79

3In the Control pop-up, select a player, or display, and specify the control settings.

???

???

???

???General Control ??? Player Power: Controls the player power.

???Display Power: Controls the power of displays under the player.

-- : Turns the power on.

-- : Turns the power off.

???Content Title: Name of the content currently playing.

???Content: Play or stop the current content.

???Urgent Message: Play or stop the current urgent message.

-- : Play the content.

-- : Stop the content.

??? : Enlarges the content

???: Click the button to capture the current display. (Only set top box type players are able to capture the current display.)

ENGLISH

80 SuperSign Server

ENGLISH

???Advanced Control ??? Device Information: displays detailed information for each device

and network configuration status.

-- Player: device, status and network connection information.

-- Display: device, status, self-diagnosis, and network informa- tion.

???Video: input, aspect ratio, power-saving mode, picture mode, back- light, contrast, brightness, sharpness, tint, color temperature, screen off, OSD menu etc.

???Audio: sets the current time of the device and controls the power schedule.

???Time: Changes the standard time of the device.

???Option: ISM mode, DPM Select, factory reset, remote control/local key lock, sleep time, power-on delay, advanced control etc.

???Settings: Changes TV channel (only on TV).

???3D: Enables/disables the 3D mode and changes the 3D settings.

(The 3D options are available only for a monitor or TV that supports 3D.)

???Time Synchronization: sets the time sync for players.

???Software Update: updates software update after a file to update has been selected.

NOTE

???The name of the software update file must start with SuperSignPlayer_setup.

???After the player updates the software, it is automatically rebooted.

Controlling the player power in details

If you control the player power settings in the control pop-up window, you can verify the detailed information for the connected player in the pop-up window.

Controlling power settings after selecting multiple players

SuperSign Server 81

Restrictions on Connecting the Player/Display

Some functions cannot be controlled in the control window depending on the player/display connec- tion status.

See the table below.

* STB: set top box type player/MNT: monitor type player

ENGLISH

82 SuperSign Server

Advanced Command line

NOTE

???To find out which Monitor or TV and control commands are supported by SuperSign, see the appendix. Monitor or TV Models Supported by SuperSign.

???The RS232C control command is dependent on the type of Monitor or TV; see the RS232C protocol in the user???s Monitor or TV manual.

???When controlling a monitor individually, enter the same set ID as the one set for the moni- tor.

???Advanced Command line does not work if the set ID you entered is invalid.

???When controlling a group of monitors, select the group and enter ???00??? for the set ID in the

Advanced Command line box. In this case, no acknowledgement is returned.

SuperSign Server 83

Creating Tiles

1 Choose a group for which tiles are created in the left group tree.

ENGLISH

NOTE

???Creating tiles is only available in the Normal view.

???The tile creation feature is not available on TVs.

2 Click the [Tile] button. The Create Tile window appears.

84 SuperSign Server

ENGLISH

???

SuperSign Server 85

Player Management

Approving Players

1Click Player on the Menu tab located at the top of the program.

2Click the Non-Approved category in the Player List.

???Unapproved players appear in the details list.

???Alternatively, select a player with shown in the item list.

3Select a player you want to approve in the player details list.

???The selected player is shown with a check mark.

4Click the [Approved] button to approve the selected player.

???Once the approval is complete, changes to .

ENGLISH

Rejecting Players

1Select a player you want to reject in the player details list.

???The selected player is shown with a check mark.

2Click the [Rejected] button to reject the selected player.

???Once the rejection is complete, or changes to .

Deleting Players

1Select a player you want to delete in the player details list.

???The selected player is shown with a check mark.

2Click the [Delete] button to delete the selected player.

3When the Confirm Delete window appears, click the [OK] button.

4When the deletion confirmation window appears, click the [OK] button.

???Once the deletion is complete, the deleted player will disappear from the details list.

NOTE

???If a player is rejected, the connection with the player is cut off. However, it may take a while to disconnect completely.

???You can only delete players that are powered off.

86 SuperSign Server

ENGLISH

User

You can view or manage (approve, reject, and delete) all user accounts.

NOTE

???User Menu is a feature that is available only in SuperSign W and SuperSign V. If you want to use this feature, please purchase SuperSign W or SuperSign V.

User Window Layout and Functions

The following shows the layout and functions of the User window.

???Action buttons ??? [Create New]: Creates a user account.

???[Delete]: Deletes a user account. (all information related to the user ID will also be deleted.)

???[Approve]: Approves a user account not approved.

???[Reject]: Rejects a user account not approved.

CAUTION

???After editing the properties under Details, if you find the changes are not reflected, config- ure Internet browser options as follows:

Go to Tools > Internet Options > Browsing History > Settings and click "Every time I visit the webpage" under "Check for newer versions of stored pages".

User Account Registration

You can create accounts to use in the program.

1Click User on the Menu tab located at the top.

2Click the [Create New] button in the top left side of the User window.

3Enter all required information.

4Click the [Save] button in the top left of the screen to save the information.

5 Click the [OK] button when The account is created successfully message appears in a pop-up.

NOTE

???Adding user accounts on the User tab is carried out in the same way as on the Login screen.

88 SuperSign Server

User Account View

???

???

???

???

SuperSign Server 89

User Account Management

Approving User Accounts

1Click User on the Menu tab located at the top.

2Click the Non-Approved category in the User List.

???Unapproved user accounts appear in the details list.

???Alternatively, select a user account with shown in the item list.

3Select an account you want to approve in the user details list.

???The selected account is shown with a check mark.

4Click the [Approved] button to approve the selected account.

???Once the approval is complete, changes to .

ENGLISH

Rejecting User Accounts

1Select an account you want to reject in the user details list.

???The selected account is shown with a check mark.

2Click the [Rejected] button to reject the selected account.

???Once the rejection is complete, or changes to .

Deleting User Accounts

1Select an account you want to delete in the user details list.

???The selected account is shown with a check mark.

2Click the [Delete] button to delete the selected account.

3When the Confirm Delete window appears, click the [OK] button.

4When the deletion confirmation window appears, click the [OK] button.

???Once the deletion is complete, the deleted player will disappear from the details list.

90 SuperSign Server

ENGLISH

Distribution

You can distribute content to players.

Distribution Window Layout and Functions

The following shows the layout and functions of the Distribution window.

???Action buttons ??? [New Distribution]: Creates a new distribution.

???[Delete]: Deletes a distribution.

???[Approve]: Approves a distribution.

???[Reject]: Rejects a distribution.

SuperSign Server 91

ENGLISH

92 SuperSign Server

Creating Content Distribution Files

5Select a content item you want to distribute in the details list.

???The selected content is shown with a check mark.

???You can view the content details in the Property panel.

???The type of player you can select varies depending on content limitations.

-- Content restrictions: Photo/video file and Flash/PDF/Office file where the resolution is higher than 1920 x 1080

-- Selecting content without limitations: You can select a monitor/TV or set-top box player.

-- Selecting content with limitations: You can only select a set top box player.

6Click the [Next] button to proceed.

???The player selection window appears.

7Select a player you want to distribute to in the player list.

???The approved player appears in the details list.

???Do not select the boxes for monitors or TVs if the file name of the selected content is 42 characters or longer.

???Do not select the boxes for monitors or TVs with a lower resolution than that of the se- lected content.

8Select a player you want to distribute to in the details list.

???The selected player is shown with a check mark.

???If you select a player with a mark, the pop-up message, ???The selected player(s)

9Click the [Next] button to proceed.

???The distribution setting window appears.

???If there is not enough free space on the player, the warning message, ???There is not enough free space on the player.??? is displayed and the next screen does not appear.

10Confirm the content to distribute, confirm the player information, and then specify distribution settings.

ENGLISH

94 SuperSign Server

11To create a distribution file as configured, click the [Distribution] button.

12When the distribution confirmation window appears, click the [OK] button.

NOTE

???When the content is distributed, any previous schedule sent are ignored.

???A file over 4GB cannot be transferred.

???When distribution has been reserved, the file is distributed if approval is given before the time reserved. If approval is given after the reserved time, then distribution takes place as soon as approval is given.

???You can cancel distribution in the middle of playback. Because content cannot be continu- ously downloaded when the distribution has been cancelled, distribution must be restarted from the beginning. For more information, see 111 Page, ???Canceling Distribution???.

???You cannot play content when the distribution percentage is not 100%.

SuperSign Server 95

Creating Schedule Distribution Files

You can send scheduled content to players.

1In the Menu tab at the top of the program screen, click Distribution.

2Click the [New Distribution] button in the top left of the Distribution window.

3When the drop-down menu appears, click Distribute schedule.

4In the schedule list, select a schedule category to distribute.

???The approved schedule appears in the details list.

5Select a schedule you want to distribute in the details list.

???The selected schedule is shown with a check mark.

???You can view the schedule details in the Property panel.

6Click the [Next] button to proceed.

???The player selection window appears.

7Select a player you want to distribute to in the player list.

???The approved player appears in the details list.

8Select a player you want to distribute to in the details list.

???The selected player is shown with a check mark.

???If you select a player with the mark, the pop-up message, ???The selected player(s) has already been distributed. Do you want to select???? is displayed. If you do not want to select the player, select another player and go to the next step.

???A player currently engaged in a distribution is locked, and a lock icon is displayed in the check box. Another distribution cannot be entered until the current one is complete.

???You can view the player details in the Property panel.

???If you select set top box schedule, monitor players will not be displayed in the player list.

???If monitor-type content is selected, only monitors or set-top box players are shown on the player list.

???If TV content is selected, only TVs or set-top box players are shown on the player list.

ENGLISH

96 SuperSign Server

ENGLISH

9Click the [Next] button to proceed.

???The distribution setting window appears.

???If there is not enough free space on the player, the warning message, ???There is not enough free space on the player.??? is displayed and the next screen does not appear.

10Confirm???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????the schedule to distribute, confirm the player information, and then specify distribu- tion settings.

Distribution Reserva- Sets a time for scheduled distribution.

tion Setting--Immediate distribution: Distribute immediately after the distribution setting is made.

--Reservation: Schedule a date and time to distribute.

SuperSign Server 97

11To create a distribution file as configured, click the [Distribution] button.

12When the distribution confirmation window appears, click the [OK] button.

ENGLISH

NOTE

???When the content is distributed, any previous schedule sent are ignored.

???A file over 4GB cannot be transferred.

???When distribution has been reserved, the file is distributed if approval is given before the time reserved. If approval is given after the reserved time, then distribution takes place as soon as approval is given.

???You can cancel distribution in the middle of playback. Because content download cannot be resumed on a monitor type player when the distribution has been canceled, distribution must be restarted from the beginning. For more information, see ???Canceling Distribution??? on page 99. (It is possible to resume downloads on a set top box type player.)

???You cannot play content when the distribution percentage is not 100%.

98 SuperSign Server

ENGLISH

Creating VideoWall Distribution File

Any content that requires synchronized video playback can be distributed as VideoWall content for VideoWall players.

NOTE

???The Distribute Regular VideoWall feature is available only in SuperSign W and SuperSign V. If you want to use this feature, please purchase SuperSign W or SuperSign V.

How to Distribute Regular VideoWall

If the monitors are positioned in a regular VideoWall grid layout (vertical or horizontal to the floor), select Distribute Regular VideoWall.

1Click the [Distribution] tab in the Menu tab at the top of the program.

2Click the [New Distribution] button at the top left of the screen.

3Click the [Distribute Sync] button when a dropdown menu appears.

4Click [Regular Type] under [Distribute VideoWall].

5On the [Create Tile Mode] screen, select a tile type for Videowall..

SuperSign Server 99

At this point, when you click the [Open] button on the [New Distribution] screen, the [Open] pop-up window will appear. Select the item you want to open and click [OK] to load the saved Distribute Regular VideoWall. You can delete saved regular VideoWall distribution items using the [Delete] button at the bottom of the [Open] pop-up window.

6 When you have completed the tile set-up, click the [Next] button.

ENGLISH

ENGLISH

100 SuperSign Server

7 On the [Content Selection] screen, assign content to a cell of the tile you want. ????You can assign either by selecting a cell of the tile and then selecting content, or by

dragging and dropping. If you drag and drop a folder, the entire contents of the folder are assigned to the cell in alphabetical order.

????You can delete the assigned content by selecting the cell in the tile and then pressing the

[Delete] key.

????The following conditions should be met for content to be applicable for sync playback:

-- The types of content applicable for sync playback are regular content, 3D content and videos.

-- Each cell in the tile must contain the same type of content. Regular content, 3D content and videos cannot be assigned together with different types of content.

-- With regard to videos, files assigned to all the cells should have the same file exten- sion.

-- With regard to regular content and 3D content, there should be only one region within the canvas and this should only contain video files.

8 When you have completed the content set-up, click the [Next] button.

SuperSign Server 101

9 On the [Select a player] screen, assign a player to a cell of the tile you want.

????You can assign either by selecting a cell of the tile you want and then selecting a player, or by dragging and dropping. If you drag and drop a folder, all the players in the folder are assigned in alphabetical order.

????You can delete the assigned player by selecting the cell of the tile and then pressing the

[Delete] key.

????You cannot assign the same single player to all the cells of the tile.

????The following conditions should be met for a player to be applicable for sync: -- Player Type: Set-top box

10 When you have completed the player set-up, click the [Next] button.

ENGLISH

ENGLISH

102 SuperSign Server

11 On the [Distribution] screen, [Master-player Setting], [Time Setting] and [Distribution Reservation Setting] can be adjusted.

????Master-player Setting: By default, the first cell of the tile becomes the master player. You can change the master player by clicking the tile on the left.

????Time Setting: You can set the playback time of content you want to distribute.

????Distribution Reservation Setting: You can schedule the distribution time. For [Time Set- ting] and [Distribution Reservation Setting], see 94 page.

13 To create a distribution file as configured, click the [Distribution] button.

104 SuperSign Server

14 When you click the [Distribution] button, a new distribution folder will be created under the videoWall folder. At this point, the status of the distribution item is [Not Approved].

ENGLISH

SuperSign Server 105

How to Distribute an Irregular VideoWall

NOTE

???The Distribute Irregular VideoWall feature is available only in SuperSign V. If you want to use this feature, please purchase SuperSign V.

If the monitors are positioned in an irregular VideoWall layout (heart shape, V shape, rhombus, etc.), select Distribute Irregular VideoWall.

1Click the [Distribution] tab in the Menu tab at the top of the program.

2Click the [New Distribution] button in the top left of the screen.

3Click the [Distribute Videowall] button when a dropdown menu appears.

4Click the [Irregular Type] button in the [Distribute Videowall] screen.

5On the [Layout&Content Selection] screen, select the desired layout.

-You can import information about each layout that has been uploaded or exported to the server via SuperSign VideoWall Editor by using the Import function on the server.

KOREAN

KOREAN

106 SuperSign Server

At this point, when you click the [Open] button on the [New Distribution] screen, the [Open] pop-up window will appear. Select the item you want to open and click [OK] to open the saved Distribute Irregular VideoWall. You can delete saved Distribute Irregular VideoWall items using the

[Delete] button at the bottom of the [Open] pop-up window.

6Select the desired layout from the layout list and the monitor and content will be placed in the workspace on the right.

7You can zoom in/out your workspace using the drop box or slider on the right. Drag or scroll to move around the zoomed-in workspace.

8 When you have imported the layout information by selecting a layout, click the [Next] button.

SuperSign Server 107

9 On the [Select a player] screen, assign a player to a cell of the tile you want.

????You can assign players either by selecting a cell of the tile you want and then selecting a player, or by dragging and dropping. If you drag and drop a folder, all the players in the folder are assigned in alphabetical order.

????You can delete the assigned player by selecting the cell of the tile and then pressing the

[Delete] key.

????You cannot assign a single player to all the cells in the tile.

????The following conditions must be met for a player to be applicable for sync: -- Player Type: Set-top box

10 When you have completed the player setup, click the [Next] button.

KOREAN

108 SuperSign Server

KOREAN

11On the [Distribution] screen, [Master-Player Setting], [Time Setting] and [Distribution Reservation Setting] can be adjusted.

????Master Player Setting: By default, the first cell of the tile becomes the master player. You can change the master player by clicking the tile on the left.

????Time Setting: You can set the playback time for content you want to distribute. Distribution Reservation Setting: You can schedule the distribution time. As for [Time Setting]

and [Distribution Reservation Setting], see 94Page.

13 If you want to create a distribution file with the set content, click the [Distribution] button.

SuperSign Server 111

Distribution Details Management

Canceling Distribution

You can cancel an item being currently distributed.

1In the distribution details list, click the [Cancel] button of the item being distributed.

???When the distribution is canceled, the [Cancel] button changes to the [Retry] button.

???The player lock is released.

Re-distribution

You can select an item that you canceled distributing and redistribute it.

1Select a canceled item in the distribution details list, and click the [Retry] button.

???Redistribution begins.

???Another distribution cannot be entered until the current one is complete.

ENGLISH

112 SuperSign Server

Approving Distribution

??? Once the approval is complete, changes to .

???Another distribution cannot be entered until the current one is complete.

???Furthermore, because the check box for a player currently distributing content is changed to a lock icon, you cannot select the player.

???When the distribution is complete, the player lock is released and the distribution screen appears automatically.

How to Approve a Folder

1Select the folder you want to approve from the folder list.

2To approve the distribution item in the selected folder, click the [Folder Approval] button.

??? Once the approval is complete, changes to and the distribu- tion begins.

???The player currently engaged in a distribution is locked, and another distribution is prohib- ited until the current distribution is complete.

???Furthermore, because the check box of a player currently distributing content changes to a lock icon, you cannot select the player.

Rejecting Distribution

1Select a distribution item you want to reject in the distribution details list.

??? The selected item is shown with a check mark.

2Click the [Rejected] button to reject the selected item.

??? Once the rejection is complete, or changes to .

??? The player lock is released.

SuperSign Server 113

Deleting Distribution

Restarting Sync

You can restart sync playback that is already distributed to the player.

NOTE

yy The Restart Sync feature is available only in SuperSign W and SuperSign V. If you want to use this feature, please purchase SuperSign W or SuperSign V.

1 Please click the subfolder in the videowall folder.

????The distribution list for the selected distribution folder will appear in the details list.

2If you want to restart sync playback of the selected distribution folder, click the [Restart Sync] button.

????Restart messages are sent to all the players of the selected distribution folder.

????If the connection is lost or if any of the players are switched off, the Message Send Failure pop-up window appears.

????If there is any sync folder under the selected distribution folder, messages are also sent to the players in all the subfolders.

114 SuperSign Server

ENGLISH

Sync Server Notification

NOTE

yy The Restart Sync feature is available only in SuperSign W and SuperSign V. If you want to use this feature, please purchase SuperSign W or SuperSign V.

Players that are performing sync playback send notifications to the server when situations such as playback stoppage or connection loss occur. Users can check notification messages through their web browsers that are connected to the server.

NOTE

yy Instant messages cannot be sent to players that are performing sync playback.

yy Players that are performing sync playback are unable to perform the content and instant message playback management.

yy To enable sync playback, the default time zone of the players you want to sync should be identical.

yy Sync playback uses the TCP/IP network technology.

yy The IP address assigned to the Master Player must be the same as the one assigned to the parent network of the slave or the network of the slave.

yy For the Master Player, it is recommended that you use a static IP.

yy If the Master Player's IP is changed after distribution, the slave cannot be connected to the

Master Player. In that case, do not click the [Sync Restart] button, but click the [Sync Distri- bution] button, and try connecting the slave again.

SuperSign Server 115

Message

You can send messages to players connected with the Server using a Web-based message ap-

plication.

1Click in the top right corner of the screen.

??? The Urgent Message window appears.

ENGLISH

???

???

???

??????

NOTE

???When you compose an emergency message, if you enter a large amount of text at once, the text may not be displayed on the Internet Explorer temporarily.

???The length of an emergency message is limited to 1024 bytes and the length limit may dif- ferent depending on the language.

???The play time of an emergency message cannot be set to 0 day, 0 hour, 0 minute, and 0 second. If it is 0 day, 0 hour, 0 minute and 0 second, the play time is automatically set to 30 seconds.

SuperSign Server 117

5 Confirm the file and the player, and click the [Send to player] button.

ENGLISH

???

???

???

NOTE

???A message can only be displayed horizontally.

???The message content will not be saved.

???When you transfer a message to a monitor or TV player, the available message editing options are limited.

-- Font: Fixed

-- Style: Only underline is available.

-- Special characters: Only special characters which can be entered by a keyboard are al- lowed: (`, !, @, #, $, %, ^, &, *, (, ), -, +, =, |, \, :, ;, ???, ???, <, >, /, ? etc)

-- Messages in languages other than those supported by the monitor or TV player may look different from the transmitted message.

118 SuperSign Server

ENGLISH

Log report

You can view logs recorded in the database with a Web browser.

1Click in the top right side of the screen.

??? The Log report window appears.

???

???

???

SuperSign Server 119

???Action buttons ??? [Refresh]: Reload the log.

???[Close]: Close the Log Report window.

Setup

Profile

You can view user information or modify user account details except the User ID and role.

1 Click in the top right corner of the screen.

??? The Setup window appears.

2Click the Profile tab.

??? When the Profile pop-up window appears, you can view or modify the user information.

3To modify the account details, select an item you want to modify and make changes.

4To save the changes, click the [Apply] button.

5To close the Setup window, click the [X] icon in the top right corner of the screen.

120 SuperSign Server

ENGLISH

Role

You can create, modify, or delete user roles.

NOTE

yy The Role tab is a feature that is available only in SuperSign W and SuperSign V. If you want to use this feature, please purchase SuperSign W or SuperSign V.

Creating Roles

A general administrator or workgroup administrator can create roles in workgroups.

1

2

Click in the top right corner of the screen.

??? The Setup window appears.

Click the Role tab.

??? The Role Setting window appears.

3

4

Click the icon.

When the registration window appears, enter role name.

ENGLISH

5

6

Click the [OK] button.

Specify the role information and rights under the Role Details and Rights.

???

???

7To save the settings, click the [Apply] button.

8To close the Setup window, click the [X] icon in the top right corner of the screen.

122 SuperSign Server

ENGLISH

Modifying Roles

You can modify roles previously created in a workgroup.

1Click in the top right corner of the screen.

???The Setup window appears.

2Click the Role tab.

???The Role Setting window appears.

3Select a role you want to modify in the Role List.

4Specify the role details and rights as needed.

???

???

5To save the settings, click the [Apply] button.

6To close the Setup window, click the [X] icon in the top right corner of the screen.

Deleting Roles

You can delete existing roles.

1Click in the top right corner of the screen.

???The Setup window appears.

2Click the Role tab.

???The Role Setting window appears.

SuperSign Server 123

ENGLISH

3Click a role item you want to delete in the role list.

4Click the [Delete] button.

5When the deletion confirmation pop-up window appears, click the [OK] button.

6When the deletion confirmation window appears, click the [OK] button.

??? The selected role is deleted.

7To close the Setup window, click the [X] icon in the top right corner of the screen.

124 SuperSign Server

ENGLISH

Server

You can view the server operations.

NOTE

???The Server tab is a feature that is available only in SuperSign W and SuperSign V.

???If you want to use this feature, please purchase SuperSign W or SuperSign V.

1Click in the top right corner of the screen.

??? The Setup window appears.

2Click the Server tab.

???The server window appears. You can view the server details, such as the server IP ad- dress, server port, memory usage, CPU usage, etc.

3 To close the Setup window, click the [X] icon in the top right corner of the screen.

SuperSign Server 125

System

You can enable or disable the approved systems and specify the settings for system manage- ment.

NOTE

???The System tab is a feature that is available only in SuperSign W and SuperSign V.

???If you want to use this feature, please purchase SuperSign W or SuperSign V.

1Click in the top right corner of the screen.

???The Setup window appears.

2Click the Systems tab.

???The current settings are displayed in the System window.

3Specify the system environment as needed.

ENGLISH

4To apply the settings, click the [Apply] button.

5To close the Setup window, click the [X] icon in the top right corner of the screen.

126 SuperSign Server

ENGLISH

Info.

You can view the SuperSign software version and customer support website link.

NOTE

???The Information tab is a feature that is available only in SuperSign W and SuperSign V.

???If you want to use this feature, please purchase SuperSign W or SuperSign V.

1Click in the top right corner of the screen.

??? The Setup window appears.

2Click the Information tab.

???The software version and customer support website link are displayed in the Information window.

3 To close the Setup window, click the [X] icon in the top right corner of the screen.

APPENDIX 127

Appendix

SuperSign Network Connection

Refer to the information below when establishing network connections for the SuperSign Manager and SuperSign Player.

ENGLISH

LAN Connection

You can choose the LAN connection when the SuperSign Manager and SuperSign Player are in the same network.

???The same network means the same gateway and subnet address for IP communications.

???The SuperSign Manager can find the SuperSign Players in the same network using the scan feature.

???For 1:1 connections, use a crossover cable that allows communications without network equipment.

???Features such as the Web, widgets, and RSS are not available in closed networks with- out an external connection to the Internet.

???If the network does not have a DHCP server, you should manually set the IP addresses of the SuperSign Manager and the SuperSign Player.

1:1 Connections

1:N Connections

128 APPENDIX

Internet Connection

Internet Connection

APPENDIX 129

Wireless Connection

Wired/Wireless Network

Available Ports

SuperSign Manager can be connected to SuperSign Player via the port listed below:

???8080: Server Open

???5432: PostgreSQL DB

???6950: Search for a Player

???9: WOL(WakeOnLan)

130 APPENDIX

ENGLISH

Required Software and United Codec

Refer to the information below on key software required to use the program and unified codecs needed to register and play videos.

Required Software

Below is a list of required software to install in order to use all edit functions of the SuperSign solution.

Microsoft Office

Install Microsoft Office on the SuperSign Manager and the SuperSign Player to use Office files as media content. (Microsoft Office 2000, XP, 2003, and 2007 are supported.)

NOTE

??? You need to purchase and install Microsoft Office individually.

Adobe Acrobat Reader (8.1 or higher)

Adobe Acrobat Reader 8.1 or higher (Lite version excluded) is required to see the Help or create content using PDF-type media content. Install the Adobe Acrobat Reader on the SuperSign Man- ager and the SuperSign Player.

NOTE

???The Adobe Acrobat Reader is available as a CD or free download at the Adobe website (www.adobe.com).

APPENDIX 131

SuperSign File Support

The following media file formats are supported:

NOTE

???To register and play videos, you need to install an appropriate unified codec on the Super- Sign Manager and the SuperSign Player.

???A maximum image size of 8,192 pixels (width or height) can be supported. A total number of 16,777,216 pixels are supported.

???The monitor or TV type player only supports a limited size of documents or images that are played simultaneously.

Unified Codecs

Install codecs required to register and play videos. If you install different codecs on the SuperSign Manager and the SuperSign Player, videos may fail to play. Make sure you install codecs of the same type and version on the SuperSign Manager and the SuperSign Player.

Video files may require different codecs for playing.

Websites to download unified codecs are listed below:

???http://www.codecguide.com

???http://shark007.net

???http://www.free-codecs.com

NOTE

???The websites above are not related to LG Electronics, and are subject to change.

???Visit their websites for details about the codec license.

???Make sure that a codec required to play the content you require is included in the down- load package before you install it.

???Install the same codec package on the SuperSign Manager and the SuperSign Player.

???Avoid duplicate installations of a codec package.

???If you want to install a different code package, uninstall the previous codec first.

132 APPENDIX

ENGLISH

Microsoft Windows Embedded Standard Con- straints

Due to internal constraints in Microsoft Windows Embedded Standard, the SuperSign Player???s operating system, the following errors can occur.

If you switch to the full screen by pressing <Alt+Enter> in the DOS window, characters except the Roman alphabet, may not appear properly.

When you select to ???save as??? in the Print window, the menu name appears in English.

When you navigate to submenu items (as in the Control Panel), some appear in English. (Hyper- Terminal, Regional, and Language Options, etc.)

Changing Primary/Secondary Display

To change the primary and auxiliary monitors of the SuperSign Player, go to Control Panel > Appear- ance and Themes > Display > Screen Resolution.???

NOTE

???The Nvidia graphics chipset, a video card installed on the SuperSign media player, does not support changing the primary/secondary monitor in Display Properties of Windows.

APPENDIX 133

Frequently Asked Questions

If the program is not working properly, refer to the information below before contacting the Service Center.

ENGLISH

ENGLISH

134 APPENDIX

APPENDIX 135

List of Monitor/TV Models Supported by Super- Sign

The functions that can control monitor/TV or distribute content via the SuperSign server may vary by monitor/TV.vary per monitor. Refer to the supported functions based on the monitor models below:

1. LIST OF MONITOR MODELS

ENGLISH

ENGLISH

136 APPENDIX

NOTE

???Display devices supported in the Media Player are subject to change without prior notice to improve the product performance.

???Some models may not support the control function depending on the firmware version of the monitor.

APPENDIX 137

2. LIST OF TV MODELS

NOTE

??? The settop box player is not supported by the TV.

Make sure to read the Important Precautions before using the product.

Keep the User???s Guide(CD) in an accessible place for furture reference.

The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.

MODEL

SERIAL

WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Temporary noise is normal when powering ON or OFF this device.