Owner's Manual

IPS LED MONITOR

(LED MONITOR)

Please read the safety information carefully before using the product.

IPS LED Monitor (LED Monitor) Model List

25UM64

25UM65

34UM65

www.lg.com

2 Table of Contents

ENGLISH

TABLE OF CONTENTS

3 LICENSE

4 ASSEMBLING AND

PREPARING

4Product Composition

5Product and Button Description

6- How to Use the Joystick Button

7- Input Connector

8Moving and Lifting the Monitor

9Installing the Monitor

9 - Assembling the Stand

12 - Detaching the Stand

15- Installing on a Table

16- Adjusting the angle

17- Tidying up Cables

18- Installing the Wall Mount Plate

18- Installing on the Wall

20- Using the Kensington Lock

21 USING THE MONITOR

21Connecting to a PC

21- DVI Connection

22- HDMI Connection

22- DisplayPort Connection

23Connecting AV Devices

23- HDMI Connection

23Connecting Peripherals

23- Connecting Headphones

24 INSTALLING THE LG

MONITOR SOFTWARE

26 USER SETTINGS

26Activating the Main Menu

26- Main Menu Features

27User Settings

27- Menu Settings

28- Ratio

29- Function

30- PBP

31- Picture

32- Color

33- Settings

34- Reset

35- Reader

36TROUBLESHOOTING

38 PRODUCT SPECIFICATION

40Factory Support Mode

(Preset Mode, DVI-D/HDMI/DisplayPort

PC)

40HDMI Timing (Video)

40Power LED

41PROPER POSTURE

41 Proper Posture for Using the Monitor

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

License 3

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

VESA, VESA logo, DisplayPort compliance logo and DisplayPort

compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Standards Association.

ENGLISH

ENGLISH

4 ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Product Composition

Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here.

HDMI cable

25UM65

25UM64

34UM65

CAUTION

yy Always use genuine LG components to ensure safety and product performance.

yy The product warranty will not cover damage or injury caused by the use of unauthorized components.

ASSEMBLING AND PREPARING 5

NOTE

yy The components may look different from those illustrated here.

yy Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.

yy To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.

yy The power cord provided may differ depending upon the region.

Product and Button Description

25UM65 25UM64

Power Indicator yy On Power on yy Off Power off

Joystick

Button

NOTE

ENGLISH

yy The joystick button is located at the bottom of the monitor.

6 ASSEMBLING AND PREPARING

34UM65

ENGLISH

Power Indicator yy On Power on yy Off Power off

Joystick

Button

NOTE

yy The joystick button is located at the bottom of the monitor.

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.

Basic Functions

Input Connector

25UM65 25UM64

ASSEMBLING AND PREPARING 7

ENGLISH

HDMI IN 1

H/P

34UM65

HDMI IN 2

HDMI IN 2

HDMI IN 1

H/P

8 ASSEMBLING AND PREPARING

ENGLISH

Moving and Lifting the

Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe trans- portation, regardless of its shape or size.

yy Place the monitor in the original box or pack- ing material before attempting to move it.

yy Before moving or lifting the monitor, discon- nect the power cord and all other cables.

yy Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

yy When moving the monitor, keep it upright and never turn the monitor on its side or tilt it side- ways.

CAUTION

yy Avoid touching the monitor screen as much as possible.

-- This may result in damage to the screen or some of the pixels used to create images.

yy When holding the monitor, the screen should face toward you to prevent it from being scratched.

yy When transporting the monitor, do not expose the monitor to shock or excessive vibration.

yy If you use the monitor panel without the stand base, its joystick button may cause the moni- tor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

Assembling the Stand

CAUTION

yy Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be cov- ered by the product warranty.

yy If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, result- ing in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

25UM65 25UM64

1 Place the screen face down.

yy To protect the screen from scratches, cover the surface with a soft cloth.

2 Check the direction of the stand body (front,

back) and then mount the stand body onto the stand hinge.

Stand Hinge

Stand Body

ENGLISH

ENGLISH

10 ASSEMBLING AND PREPARING

4Fix the stand base to the stand body. Turn the screws on the stand base to the right.

Stand Body

Stand Base

ASSEMBLING AND PREPARING 11

1 Place the screen face down.

100 mm

(3.9 inch)

ENGLISH

Stand Hinge

CAUTION

yy To protect the screen from scratches, cover the surface with a soft cloth.

2Mount the stand base onto the stand hinge as shown in the illustration. Fix two screws into the back of the stand base and close the screw cover.

Stand Base

Screw Cover

CAUTION

yy The stand height is adjustable by 20 mm (0.7 inch).

yy When tightening the screws after mounting the stand base onto the stand hinge, be sure to hold the stand base with your hand. Other- wise, the product may fall, causing personal injury or damage to the product.

yy Be careful not to hurt your hand on the edges of the screw covers.

120 mm

(4.7 inch)

ENGLISH

12 ASSEMBLING AND PREPARING

yy Illustrations in this document represent typical procedures, so they may look different from

the actual product.

yy Do not carry the monitor upside down by just Stand Base holding the base. This may cause the monitor

to fall off the stand and could result in personal injury.

yy When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.

yy If you use the monitor panel without the stand base, its joystick button may cause the moni- tor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

25UM65 25UM64

1 Place the screen face down.

CAUTION

yy To protect the screen from scratches, cover the surface with a soft cloth.

3Lift up the screw cover to detach the screw cover from the stand body. Remove the screws from the back of the stand body using a screw- driver and detach the stand body from the stand hinge as shown in the illustration.

Stand Body

Stand Hinge

Screw Cover

ASSEMBLING AND PREPARING 13

ENGLISH

ENGLISH

14 ASSEMBLING AND PREPARING

34UM65

1 Place the screen face down.Stand Base

CAUTION

yy To protect the screen from scratches, cover the surface with a soft cloth.

2Detach the screw cover from the stand base as shown in the illustration and then remove the two screws on the back to detach the stand base from the hinge.

CAUTION

yy When removing the screws to detach the stand base from the hinge, be sure to hold the stand base with your hand. Otherwise, the product may fall, causing personal injury or damage to the product.

Screw Cover

ASSEMBLING AND PREPARING 15

Installing on a Table

1Lift the monitor and place it on the table in an upright position. Place the monitor at least 10 cm away from the wall to ensure sufficient ventilation.

25UM65 25UM64

10 cm (3.9 inch)

10 cm

2Connect the power adapter to the monitor and then plug the power cord into the wall outlet.

25UM65 25UM64

or

ENGLISH

10 cm

34UM65

10 cm

34UM65

10 cm (3.9 inch)

10 cm

10 cm

10 cm

3Press the joystick button on the bottom of the monitor to turn on the monitor.

CAUTION

yy Unplug the power cord before moving or installing the monitor. There is risk of electric shock.

16 ASSEMBLING AND PREPARING

Adjusting the angle WARNING

ENGLISH

1Place the monitor mounted on the stand base in an upright position.

2Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5?? to 20?? for a comfortable viewing experience.

25UM65 25UM64

yy When you adjust the angle, do not hold the stand as shown on the following illustration. You may injure your fingers.

25UM65 25UM64

20 -5

20 -5

34UM65

The angle of the screen can be adjusted forward or backward from -5?? to 15?? for a comfortable viewing experience.

34UM65

15 -5

yy Be careful not to touch or press the screen area when adjusting the angle of the monitor.

25UM65 25UM64

ASSEMBLING AND PREPARING 17

Tidy up cables using the cable holder on the stand base as shown in the illustration.

25UM65 25UM64

yy Cables can get caught in the hinge area as shown in the illustration, so be careful when organizing cables.

34UM65

ENGLISH

34UM65

18 ASSEMBLING AND PREPARING

ENGLISH

Installing the Wall Mount Plate

This monitor meets the specifications for the wall mount plate or other compatible devices.

1Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth.

2Attach the clear sheet to the back of the moni- tor and align it with the screw holes.

(Only 34UM65)

Clear sheet (PET sheet)

3Place the wall mount plate onto the monitor and align it with the screw holes.

4Tighten the four screws to fix the plate to the monitor using a screwdriver.

Wall mount plate

NOTE

yy The wall mount plate is sold separately.

yy For more information on installation, refer to the wall mount plate's installation guide.

yy Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen

Installing on the Wall

Install the monitor at least 10 cm (3.9 inch) away from the wall and leave about 10 cm (3.9 inch) of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instruc- tions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

10 cm (3.9 inch)

10 cm

10 cm

10 cm

To install the monitor to a wall, attach a wall mount- ing bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is se- curely fixed to the monitor and to the wall.

1Use the screws and wall mounting bracket that conform to VESA standards.

2If you use screws longer than the standard length, it may damage the inside of the prod- uct.

3A non-VESA standard screw may damage the product and cause the monitor to fall. LG Elec- tronics is not liable for any accidents relating to the use of non-standard screws.

4VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications.

5Use the wall mount plate and fixing screws that conform to VESA standards as specified below.

yy 784.8 mm (30.9 inch) or less

**Thickness of the wall mount plate: 2.6 mm (0.1 inch)

**Fixing screw: Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm (Diameter 0.15 inch x Pitch 0.02 inch x Length 0.39 inch)

yy 787.4 mm (31.0 inch) or more

**Use the wall mount plate and screws that conform to VESA standards.

yy VESA (A x B)

ASSEMBLING AND PREPARING 19

CAUTION

yy Unplug the power cord before moving or install- ing the monitor to avoid electric shock.

yy Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or quali- fied personnel.

yy Applying excessive force when tightening screws may cause damage to the monitor. Dam- age caused in this way will not be covered by the product warranty.

yy Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty.

yy When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.

Wall Mount Plate

Back of the Monitor

NOTE

yy Use the screws specified by VESA standards. yy The wall mount kit includes the installation guide

and all necessary parts.

yy The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.

yy The length of the screw may differ for each wall mounting bracket. Be sure to use the proper length.

yy For more information, please refer to the user manual for the wall mounting bracket.

ENGLISH

ENGLISH

20 ASSEMBLING AND PREPARING

Using the Kensington Lock

The connector for the Kensington security system is located at the back of the monitor.

For more information on installation and usage, refer to the Kensington lock owner's manual or visit the website at http://www.kensington.com.

Connect the monitor to a table using the Kensing- ton security system cable.

25UM65 25UM64

34UM65

NOTE

yy The Kensington security system is optional. You can obtain optional accessories from most electronics stores.

Using the Monitor 21

USING THE MONITOR Connecting to a PC

yy The following instructions are based on the 25UM65 model. Illustrations in this manual may differ from the actual product.

Press the joystick button, go to Menu ??? Easy con- trol ??? Input, and then select the input option.

CAUTION

yy Do not press the screen for a prolonged time. This may cause image distortion.

yy Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible.

NOTE

yy When connecting the power cord to the out- let, use a grounded (3-hole) power strip or a grounded power outlet.

yy The monitor may flicker when turned on in an area where the temperature is low. This is normal.

yy Sometimes red, green, or blue spots may ap- pear on the screen. This is normal.

yy This monitor supports the *Plug and Play feature.

*Plug and Play: A feature that allows you to add a device to your computer without having to recon- figure anything or install any manual drivers.

DVI Connection

Transmits digital video signals to the monitor. Con- nect the monitor using the DVI cable as illustrated below.

To hear sound in DVI input mode, connect the PC's AUDIO OUT port to the monitor's AUDIO IN (PC) port using the audio cable.

(sold separately)

ENGLISH

CAUTION

yy Connect the input signal cable and turn it in the direction of the arrow as shown in the illustration. To prevent disconnection, secure the cable tightly.

NOTE

yy Using a DVI to HDMI cable may cause com- patibility issues.

22 Using the Monitor

ENGLISH

HDMI Connection

Transmits digital video and audio signals from your PC to the monitor. Connect your PC to the monitor using the HDMI cable as shown in the illustration below.

DisplayPort Connection

Transmits digital video and audio signals from your PC to the monitor. Connect the monitor to your PC using the display port cable as shown in the illus- tration below:

DC

(19 V

HDMI IN 1

H/P

DP IN

HDM

HD

(sold separately)

DP OUT

CAUTION

yy Connecting your PC to the monitor using the HDMI cable may cause device compatibility issues.

yy Using a DVI to HDMI cable may cause com- patibility issues.

NOTE

yy There may be no video or audio output de- pending on the DP (DisplayPort) version of the PC.

Using the Monitor 23

Connecting AV Devices

HDMI Connection

HDMI transmits digital video and audio signals from your AV device to the monitor. Connect your AV device to the monitor using the HDMI cable as shown in the illustration below.

DC

(19 V

HDMI IN 1

H/P

NOTE

yy Using a DVI to HDMI cable may cause compatibility issues.

Connecting Peripherals

Connecting Headphones

Connect peripherals to the monitor via the head- phones port. Connect as illustrated.

(sold separately)

NOTE

yy Peripheral devices are sold separately.

yy If you use Angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recom- mended to use Straight earphones.

ENGLISH

AngledStraight

yy Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited.

ENGLISH

24 Installing the LG Monitor Software

INSTALLING THE LG MONITOR SOFTWARE

Insert the Software CD included in the product packaging into your PC's CD drive and install the LG Monitor Software.

4 Check the "I accept the terms of the agree-

ment" checkbox on the License Agreement screen and then click the Next button.

2Click LG Monitor Software on the CD's main screen. When the file download window ap- pears, click Run. (Although the screen below may differ depending on your operating system or Internet Explorer version, the installation methods are the same.)

5 Select the program that you want to install.

CAUTION

yy Windows 7 must be updated to Service Pack 1 or higher.

Installing the LG Monitor Software 25

NOTE

yy Screen Split: This program automatically splits the program window as desired.

yy Auto Resolution: This is a program that auto- matically changes the resolution to the optimal settings when connecting the monitor to the PC in PBP mode.

??????This program is not supported in Clone Mode.

??????Extended Mode is not supported when using a single display.

6The LG Monitor Software starts the installation as shown below:

7The program you selected on the FUNCTION page will install automatically.

8When the installation is complete, restart the system.

NOTE

yy When you run Screen Split, the Screen Split

icon [] appears in the system tray at the bottom right of the PC screen.

yy Right-click the Screen Split icon and select the desired layout.

ENGLISH

ENGLISH

26 User Settings

USER SETTINGS

Activating the Main Menu

1Press the joystick button on the bottom of the monitor.

2Move the joystick up/down (???/???) and left/right(???/???) to set the options.

3Press the joystick button once more to exit the main menu.

Main menu disabled Adjusts the monitor volume level.

???

Main menu enabled Enters the menu features.

Main menu disabled Adjusts the monitor volume level.

???

Main menu enabled Enters the PBP feature.

Main menu disabled Enables the main menu.

???

Main menu enabled Enters the reader feature.

Main menu disabled Enables the main menu.

???

Main menu enabled Turns off the monitor.

Main Menu Features

Long press: Monitor off

User Settings 27

User Settings

Menu Settings

1To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the

Menu.

2Configure the options by moving the joystick up/down/left/right.

3To return to the upper menu or set other menu items, move the joystick to ??? or pressing ( / OK) it.

4If you want to exit the OSD menu, move the joystick to ??? until you exit.

yy When you enter the menu, instructions on how to use the button will appear in the bottom right corner of the screen.

Easy control Function PBPScreen Settings Reset

Each option is described below.

ENGLISH

28 User Settings

ENGLISH

Ratio

1To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.

2Go to Easy control > Ratio by moving the joystick.

3Configure the options following the instructions that appear in the bottom right corner.

4To return to the upper menu or set other menu items, move the joystick to ??? or pressing ( / OK) it.

5If you want to exit the OSD menu, move the joystick to ??? until you exit.

Easy control

NOTE

yy The display may look the same for Wide, Original, and 1:1 options at the recommended resolution (2560 x 1080).

yy The ratio is disabled in the interlaced signal.

User Settings 29

5If you want to exit the OSD menu, move the joystick to ??? until you exit.

Settings

Reset

Each option is described below.

ENGLISH

30 User Settings

ENGLISH

PBP

1To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.

2Go to PBP by moving the joystick.

3Configure the options following the instructions that appear in the bottom right corner.

4To return to the upper menu or set other menu items, move the joystick to ??? or pressing ( / OK) it.

5If you want to exit the OSD menu, move the joystick to ??? until you exit.

PBP

Settings

PBP Preview

Reset

DVI-D

Each option is described below.

NOTE

yy When the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled. The Main/Sub options for Ratio become disabled if there is no signal.

User Settings 31

5If you want to exit the OSD menu, move the joystick to ??? until you exit.

Settings

Reset

Each option is described below.

ENGLISH

32 User Settings

ENGLISH

Color

1To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.

2Go to Screen > Color by moving the joystick.

3Configure the options following the instructions that appear in the bottom right corner.

4To return to the upper menu or set other menu items, move the joystick to ??? or pressing ( / OK) it.

5If you want to exit the OSD menu, move the joystick to ??? until you exit.

Reset

Each option is described below.

5If you want to exit the OSD menu, move the joystick to ??? until you exit.

Settings

Reset

Each option is described below.

yy All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings, and the Exit button.

ENGLISH

34 User Settings

ENGLISH

Reset

1To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu.

2Go to Reset by moving the joystick.

3Configure the options following the instructions that appear in the bottom right corner.

4To return to the upper menu or set other menu items, move the joystick to ??? or pressing ( / OK) it.

5If you want to exit the OSD menu, move the joystick to ??? until you exit.

Reset

Do you want to reset your settings?

Easy control

Reset

Cancel

Function

PBP

Screen

Settings

Reset

Each option is described below.

User Settings
Reader Mode

35

Reader

Each option is described below.

ENGLISH

36 Troubleshooting

TROUBLESHOOTING

The OSD Locked message is being displayed.

Are some functions not avail- yy The OSD is locked. Go to Menu > Settings and set OSD Lock to Off. able when you press the Menu

button?

The screen retains an image.

Does image sticking occur even yy Displaying a still image for a prolonged time may cause damage to when the monitor is turned off? the screen, resulting in the retention of the image.

yy To extend the lifetime of the monitor, use a screensaver.

Screen display is unstable and shaky / Images displayed on the monitor leave shadow trails.

Did you select the appropriate resolution?

yy If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080P or the recommended resolution.

NOTE

yy Vertical Frequency In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by Hz.

yy Horizontal Frequency The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second. This is called horizontal frequency and is represented by Hz.

Troubleshooting 37

NOTE

yy Check if the video card's resolution or frequency is within the range allowed by the monitor and set it to the recommended (optimal) resolution in Control Panel > Display > Settings.

yy Not setting the video card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.

yy The setting methods may be different depending on the computer or operating system, and some reso- lutions may not be available depending on the performance of the video card. If this is the case, contact the manufacturer of the computer or video card for assistance.

yy Some video cards may not support 2560 x 1080 resolution. If the resolution cannot be displayed, con- tact the manufacturer of your video card.

The display color is abnormal.

ENGLISH

ENGLISH

38 Product Specification

PRODUCT SPECIFICATION

Specifications are subject to change without notice.

Specifications are subject to change without notice.

ENGLISH

ENGLISH

40 Product Specification

Factory Support Mode

(Preset Mode, DVI-D/HDMI/DisplayPort PC)

** DVI: DTV Mode is not supported (interlace mode)

HDMI Timing (Video)

Power LED

PROPER POSTURE 41

PROPER POSTURE

Proper Posture for Using the Monitor

Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye level.

yy Take a break for approximately 10 minutes every hour to reduce any fatigue caused by prolonged usage.

yy The stand of the touch monitor allows the product to be used in the optimum position.

yy Adjust the stand angle from -5?? to 15?? (34UM65) / -5?? to 20?? (25UM65 / 25UM64) to obtain the best view of the screen.

ENGLISH

You should be looking slightly down at the screen.

Place your hands gently on the keyboard,

keeping your arms bent at the elbows

and extended horizontally in front of you.

Stand Angle

-5?? to 15?? (34UM65) / -5?? to 20?? (25UM65 / 25UM64)

Adjust the position of the screen to mini- mize reflections.

Declaration of Conformity

Trade Name: LG

Model: **

Responsible Party: LG Electronics Inc.

Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A

TEL: 201-266-2534

(** 25UM64, 25UM65, 34UM65)

This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions. Read the owner's manual (CD) carefully and keep it at hand. Please note that the label attached to the product provides information for technical support.

Model

Serial No.

ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency (EPA).

As an ENERGY STAR Partner LGE U. S. A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Refer to ENERGY STAR.gov for more information on the ENERGY STAR program.