KODAK HERO 2.2
Extended User Guide
KODAK HERO 2.2
Extended User Guide
Eastman Kodak Company
Rochester, NY 14650
?? Eastman Kodak Company, 2012
Kodak, Hero and Perfect Touch are trade marks of Eastman Kodak Company.
Specifications are subject to change without notice.
1 Printer Overview
This printer lets you print, copy, scan and fax pictures and documents. In addition, this printer supports networking, letting you access the printer over a wireless
Components
**When lit, signals the printer is connected to a wireless network; blinks when searching for an available
Printer Overview
Control panel
Home Centre Software
KODAK Home Centre Software is installed with your KODAK
:You can choose to install the KODAK AIO Printer Software Essentials, which include the drivers and Printer Tools only.
On a computer with WINDOWS Operating System (OS), you can use Home Centre Software to:
KODAK HERO 2.2
browse, crop, enhance and edit pictures print and scan
make 3D pictures (from picture pairs taken to create 3D pictures) print from video
send images to or print images from FACEBOOK Social Network, FLICKR, PHOTOBUCKET, PICASA Photo Management Systems and GOOGLE Docs
configure your printer install new network printers
upgrade to the latest printer software and firmware order supplies
access the KODAK Tips and Projects Centre access the Online Printer Management Tool
On a computer with MAC OS, you can use Home Centre Software to:
scan
configure your printer
upgrade to the latest printer software and firmware
order supplies
see the status of your printer
access the KODAK Tips and Projects Centre access the Online Printer Management Tool
Ordering supplies
You can order ink cartridges, paper and accessories online. An internet connection is required. To order ink directly from Home Centre Software:
1.Open Home Centre Software.
2.Select Order Supplies (on a computer with WINDOWS OS) or select the Tools tab, then click Order Supplies
(on a computer with MAC OS).
3.Select the item(s) you want to buy, then follow the
To order supplies directly from the Web:
For ink, go to www.kodak.com/go/printingsupplies
For paper, go to www.kodak.com/go/inkjetpaper
Configuring printer settings
: When you first power on the printer, the LCD prompts you to select the Language and Country/Region. To set or change basic printer settings:
Printer Overview
1.Press 
.
2.Press 
to select Printer Settings, then press OK.
3.Press 
to select one of the following settings:
Date and Time
-Press OK, then press 
to select Year, Month, Day, Hour or Minute.
-Press 
or 
to change the values; press OK when you have finished.
-Press 
to return to the Printer Settings menu.
Button Sounds
-Press 
to select Off, Soft or Loud.
Time to Low Power
-To conserve energy, your printer will enter a low power (sleep) mode after being idle for a default delay time of 1 hour. You can increase the delay time to low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
Press 
to change the time to
-Press 
to select Off or On.
Language
-Press OK, press 
to select a language, then press OK.
Country/Region
-Press OK, press 
to select a country or region, then press OK.
Reset All Settings (see Resetting factory defaults, 78)
:Resetting factory defaults does not change the date and time, language, country/region or network settings.
Printer Info
-Press OK to view the Firmware Version number; press OK when you have finished.
4.Press 
to return to the Main Menu.
2 Networking Your Printer
This section explains how to configure or change your wireless network settings.
Connecting to a wireless network
To connect your printer to an 802.11b/g/n wireless
Before you connect
You need:
a wireless router.
to determine whether your wireless router supports
:If you have specific questions about your router, see your router manufacturer's documentation for more information.
Connecting to a wireless network using the
You can use the
Connecting to a
To connect your printer to your wireless network, you need to know the network name, also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation for more information.
If you have enabled security on your network, you also need to know the security string (passphrase or password), which may be a Wired Equivalent Privacy (WEP) or a
Record your network information using the correct uppercase and lowercase letters. Network Name (SSID):
Security String
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.With
:The
The
If there are more networks than can be shown on the LCD, press 
to view them.
Networking Your Printer
4.Press 
to select your network name, then press OK.
If you can't see your network in the list, or if you want to change your network, select Rescan for Wireless Networks, then press OK.
NOTE: If the name of your network is not listed, make sure your wireless router is turned on and within range.
5.If your network requires a password, use the LCD keyboard to enter your Security String. The Security String is
On the control panel, press 
, 
, 
or 
to select the letters and numbers. When you have finished, select DONE, then press OK.
6.When the confirmation message appears, press OK.
When the printer is successfully connected, the
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+xxxx).
7.If you haven't yet installed the KODAK
NOTE: If you do not have the CD:
a.Go to www.kodak.com/go/aiodownloads.
b.In the results list, click the link for KODAK
c.Follow the
Connecting to a WPS wireless router
If your router supports
To connect to a network using WPS:
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.With
:The
4.With WPS Connect selected, press OK.
KODAK HERO 2.2
5.Select one of two methods of connecting:
:Before you press OK on the printer, make sure you know where the router's push button is or where to enter the generated PIN. If necessary, consult your Internet Service Provider or router device manufacturer's documentation for more information.
6.When the confirmation message appears, press OK.
When the printer is successfully connected, the
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+xxxx).
7.If you haven't yet installed the KODAK
NOTE: If you do not have the CD:
a.Go to www.kodak.com/go/aiodownloads.
b.In the results list, click the link for KODAK
c.Follow the
Setting up an IP Address
:You should only need to set up an IP Address for your printer if you are having a problem connecting your printer to a wireless network. Typically, it is not necessary to set up an IP Address. This procedure is for advanced users.
All IP Address entries have the following format: 000.000.000.000. Within each
Networking Your Printer
The address as it may appear in your documentation How to enter the address in the printer menu
To set up your IP Address on the printer:
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.Press 
to select Advanced IP Address
4.Press OK again to continue.
5.Select one of the following, then press OK:
Dynamic (DHCP)
Manual (Static)
6.If you selected Manual (Static), you are prompted to enter an IP Address, a Subnet Mask, a Gateway Address and a DNS Server address. Press OK after each entry. Use the navigation buttons to enter each digit of the numbers.
Consult your Internet Service Provider or network administrator for more information.
Viewing the network configuration
To view the network configuration and verify that you are connected to your wireless network:
1.Press 
.
2.Press 
to select Network Settings, then press OK.
3.Press 
to select View Network Configuration, then press OK.
The wireless or Ethernet network settings appear on the LCD, including:
Connection
IP Address
Printer Name
Printer Hostname
Connected Network SSID
Speed
IP Address Type
Network Subnet
Security
Authentication
Channel
Region
Radio (on/off)
MAC Address
If the printer is connected to your network, you will see the network name and the word CONNECTED.
KODAK HERO 2.2
4.To scroll through the information, press 
.
5.When you have finished, press OK.
Printing the network configuration
To print the current network configuration:
1.Load plain paper into the printer. (See Loading plain paper, 27.)
2.Press Home.
3.Press 
to select Network Settings, then press OK.
4.Press 
to select Print Network Configuration, then press OK.
Installing your printer on additional computers on the network
To add your printer to another computer(s) on your network, install the KODAK
Insert the CD that came with the printer into the computer CD drive, and follow the
NOTE: If you do not have the CD:
a.Go to www.kodak.com/go/aiodownloads.
b.In the results list, click the link for KODAK
c.Follow the
Connecting to another KODAK
If you are connecting to a newer model printer (for example, you have an ESP Office 2150 Printer and now you are adding a HERO 2.2 Printer), you must install the KODAK
:When you install the new software, the printer driver for the ESP Office 2150 Printer will be uninstalled, and updates for the ESP Office 2150 Printer will be installed in addition to the driver for the HERO 2.2 Printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > KODAK Printer
If your wireless printer (example: KodakHERO2.2+xxxx) is not listed:
a.Select No, my printer is not listed, then click Next.
b.From the
c.Select Network - Wireless /
d.When driver installation is complete, click Done.
If your wireless
a.Select the
b.Select Yes, my printer is listed, then click Next.
On a computer with MAC OS:
Networking Your Printer
1.Select Apple > System Preferences.
2.Under Hardware, select Print & Fax (for MAC OS 10.5 and 10.6) or Print & Scan (for MAC OS 10.7).
3.Click + in the dialog box.
4.For MAC OS 10.5 and 10.6: select your printer from the list, then click Add.
Adding a wireless network connection to a
You can change the way you connect to your printer at any time.
Changing from USB to a wireless connection
To change the printer connection type from USB to a wireless
If your printer is connected to a computer with WINDOWS OS:
1.Disconnect the USB cable from your printer and computer.
2.On your computer, disable any firewall you have installed until you have successfully completed the installation.
3.If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, 5.
4.Select Start > All Programs > Kodak > KODAK Printer
If your wireless
a.Select No, my printer is not listed, then click Next.
b.Select your printer from the list.
c.Select Network -
d.When driver installation is complete, click Done.
If your wireless
a.Select the
b.Select Yes, my printer is listed, then click Next.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2 +xxxx).
If your printer is connected to a computer with MAC OS:
1.Disconnect the USB cable from your printer and computer.
2.If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network, 5.
3.Select Apple > System Preferences.
4.Under Hardware, select Print & Fax (for MAC OS 10.5 and 10.6) or Print & Scan (for MAC OS 10.7).
5.Click + in the dialog box.
6.For MAC OS 10.5 and 10.6: select your printer from the list, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2 +xxxx).
3 Online Printer Management Tool
The KODAK Online Printer Management Tool lets you access your printer through an Internet browser (for example, INTERNET EXPLORER, FIREFOX, SAFARI, CHROME) on any computer that is on the same network as your printer.
:Your computer and your printer must be on the same network. The Online Printer Management Tool is not available if your printer is connected to a computer with only a USB cable.
With the Online Printer Management Tool, you can:
view printer status
configure (or change) printer settings
change fax settings and add entries to the Fax phonebook
create Scan to
add entries to the
set up accounts for GOOGLE Cloud Print and KODAK
Accessing the Online Printer Management Tool
Access the Online Printer Management Tool in one of the ways described below.
Directly from Home Centre Software v7.x or higher:
1.Open Home Centre Software.
2.Select Printer Tools on a computer with WINDOWS OS, or Tools on a computer with MAC OS.
3.Make sure that the name of your wirelessly connected printer appears in the bottom left of the window.
Online Printer Management Tool
:A printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2+XXXX). If a different printer name appears, click Select, then choose your wirelessly connected printer.
4.Under Online Printer Tools, select Online Printer Management. The Online Printer Management Tool opens.
From a computer or mobile device:
: Your computer or mobile device must be connected to the same network as your printer.
1.Get the IP Address of your wirelessly connected printer:
a.On your printer control panel, press Home.
b.Press 
to select Network Settings, then press OK.
c.Press 
to select View Network Configuration, then press OK.
d.Press 
to see the IP Address in the format xxx.xxx.xxx.xxx. (See Viewing the network configuration, 8.)
:If you prefer a printout, press 
to select Print Network Configuration, then press OK. A Network Configuration Page prints, including the IP Address in the format xxx.xxx.xxx.xxx.
2.On your computer, open your preferred Internet browser (for example, INTERNET EXPLORER, FIREFOX, SAFARI, CHROME).
3.Type the printer IP Address in the browser address (URL) bar, then press Enter. The Online Printer Management Tool opens.
Using the Online Printer Management Tool
Configuring printer settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Device > General, Date & Time or Reset, and make any necessary changes.
KODAK HERO 2.2
4.Click Save.
:Select Reset to restore the default settings, if necessary.
Changing the printer name
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Network tab.
3.Select General > Friendly Name.
4.Highlight the text in the Friendly name field and type the name you want, then click Save.
Online Printer Management Tool
Adjusting fax settings
Editing the fax phonebook
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Fax > Phonebook.
To add a phonebook entry:
1.Type the name and fax number, and, optionally, select a quick dial number for your fax entry.
2.Click Add.
To edit a phonebook entry:
1.Select the checkbox for an existing entry in the Phonebook.
2.Click Edit.
3.Make the changes.
4.Click Save, then click OK.
To delete a phonebook entry:
1.Select the checkbox for an existing entry in the Phonebook.
2.Click Delete, then click Yes.
Changing fax settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Fax > Settings.
KODAK HERO 2.2
4.Enter the sender information.
This information appears in the header of faxes you send from your printer. (For more information about sender information, see Entering fax sender information, 58.)
5.Adjust any fax settings, as necessary. (For more information about settings, see Selecting fax settings, 59.)
6.Click Save.
Setting up Scan To
When you scan with your printer, you can send the scans directly from the printer to an
Creating the outgoing
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Scan To
Online Printer Management Tool
4.Click Add New Outgoing
5.In the Profile Name field, type a name that has meaning to you; for example, your initials and your email provider, such as LR Hotmail or LR Gmail.
This name will appear on the printer control panel for you to select when you start a scan to be sent through e- mail.
6.In the From
Although the
7.Under
KODAK HERO 2.2
If your
If your
a.Type the
b.Type the port number of your
:Locate this information in the
c.If your mail server supports secure connection mode, select the Always use a secure connection checkbox.
8.If your
a.Select the The
b.Type the User ID and Password for your
9.If you want to limit who uses your profile (which appears on the printer LCD) to send scans:
a.Select the Enable Access PIN checkbox.
b.Type a
10.If you want a copy of all
11.Click Test Profile to confirm that the printer can access your account.
If the printer can access your account, "Test profile: Successful" appears. Click OK, then click Save.
If the printer cannot access your account, "Test Profile: Failed" appears. Click OK, then make changes to the profile.
Setting up the
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
Online Printer Management Tool
3. Select Scan To
4.For each person:
a.Type the person's Name.
b.Type the person's
c.Click Add.
Setting options for scan to
When you send a scan to an
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Scan To
KODAK HERO 2.2
4.Select and replace the default subject line and body text, if desired.
This subject line and body text will be included with every scan you send to an
5.Select the scan settings that will be used for all scans sent to
:You can enter a Filename Prefix of your choice.
6.Click Save, then click OK.
You can now send a scan to an
Online Printer Management Tool
Setting up Scan To Network Folder
You can scan documents or photos directly to a file in a shared folder on your network.
Before you create a network folder profile
You must identify or create a network shared folder on a computer connected to the same network as your printer. Note the network name of the folder, including the path information, and the name of the computer where it is located. To learn more about sharing folders, see the information in the links below.
For computers with WINDOWS XP OS, see www.microsoft.com/windowsxp/using/networking/maintain/ share.mspx
For computers with WINDOWS VISTA OS, see
For computers with WINDOWS 7 OS, see
Adding a network folder profile
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Scan To Network Folder > Network Folder Profile.
4.Click Add New Network Folder Profile.
5. Enter a Profile Name and a Folder Path.
KODAK HERO 2.2
6.If the computer where the folder is located requires authentication to access its shared folders, type the network login User Name and Password. If you want to limit who uses your profile to scan documents to your network folder, select the Enable Access PIN checkbox and type a
7.Click Test Profile to confirm that the printer can access the network folder.
If the printer can access the network folder, "Test profile: Successful" appears. Click OK, then click Save.
If the printer cannot access the network folder, "Test Profile: Failed" appears. Click OK, then make changes to the network folder profile.
You are now ready to scan a document or photo to your network folder from the printer control panel. See Scanning from the printer control panel, 51.
Setting scan settings for scan to network folder
When you send a scan to a network folder, the printer uses defaults that you set up under scan settings.
1.Select Scan To Network Folder > Scan Settings.
2.Select the scan settings that will be used for all scans sent to a network folder:
:You can enter a Filename Prefix of your choice.
Online Printer Management Tool
3. Click Save, then click OK.
You can now send a scan to a network folder from the printer control panel. See Scanning from the printer control panel, 51.
Changing printer settings for copying and printing
You can change the default printer settings for copying documents and photos, and for printing photos.
Changing Copy Document and Copy Photo settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Copy & Print > Copy Document or Copy Photo.
4.Make the changes you want in the appropriate fields.
5.Click Save, then click OK.
KODAK HERO 2.2
Changing Print Photo settings
1.Open the Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Copy & Print > Print Photo.
4.Make the changes you want in the appropriate fields, then click Save.
Online Printer Management Tool
Setting up Cloud Printing
Registering your printer with Google Cloud Print??? and KODAK
Your printer lets you print from anywhere in the world from your smartphone, tablet or computer that uses Google Cloud Print enabled apps.
KODAK
1.Make sure your printer and computer are connected to the same network (see Networking Your Printer, 5).
2.Make sure you have the latest version of Home Centre Software and printer firmware (see Updating the software and printer firmware, 77).
3.Do one of the following:
Open Home Centre Software, then click Cloud Printing
Depending on your Operating System, use the path below to select Cloud Printing
-WINDOWS XP OS: Select Start > Programs > Kodak > KODAK AIO Printer Tools, then click Cloud Printing
-WINDOWS VISTA and 7 OS: Select WINDOWS icon > All Programs > Kodak > KODAK AIO Home Centre > Printer Tools, then click Cloud Printing
-MAC OS: Select KODAK AIO Home Centre > Tools, then click Cloud Printing
4.In the Google Cloud Print
5.Follow the
:You may need to sign in to your GOOGLE Account during the
6.When you see the "Thanks, you're ready to go!" message, close the window and return to Google Cloud Print
7.Click Claim Address, then click Accept.
:If you want to change the
8.Make sure you have plain paper loaded in the printer. A page will be sent to your printer to indicate that your printer has been successfully set up. This may take a few minutes. The page includes the
For information about printing, see Printing using Google Cloud Print, 40 and Printing using KODAK
Editing a Google Cloud Print??? Account
Once you have successfully registered your printer with Google, you can make edits to various fields.
1.Open the KODAK Online Printer Management Tool (see Accessing the Online Printer Management Tool, 11).
2.Select the Settings tab.
3.Select Cloud Printing > Google Cloud Print.
4.Click Edit Settings.
5.Make the changes you want in the appropriate fields, then click Save.
KODAK HERO 2.2
Editing the settings for KODAK
1. Do one of the following:.
Go to www.kodakeprint.com.
If the Online Printer Management Tool is open, select the Settings tab, then Cloud Printing > KODAK
2.If necessary, sign in to your GOOGLE Account.
3.Click Settings (next to your printer name). Make sure the checkbox next to Enabled is selected.
Changing the
When you registered your printer with KODAK
1.Click edit (next to the Printer
2.Type the new
3.When you have a valid
4.Make sure you have letter or A4 size paper loaded in the printer. A page that includes the new address of your printer will print.
Printer Settings
You can make changes to the default settings, as needed.
1.With the Printer Settings tab selected, make any changes. If you clear the checkbox next to Print
2.Click Save.
Allowed Users
To control who can send
1.Click the Allowed Users tab. Next to Access Control, click Edit.
2.From the
3.To add an
4.Type the
:To delete an
History
Click the History tab to see a list of printed
4 Handling Paper
For the best document printing results, use KODAK Document Papers or a paper with the COLORLOK Technology logo on the package. Use only paper that is designed for inkjet printers.
For the best photo printing results, use KODAK Photo Papers, which are optimised to work with KODAK
When handling photo paper:
Hold the paper by the edges; avoid placing your fingerprints on it.
Do not touch the glossy side of photo paper.
Store paper flat, away from direct sunlight and heat.
Paper types
You can use:
Plain paper ??? 16 to 24 lb / 60 to 90 gsm
Photo paper ??? up to 12 mils (up to 290 gsm)
Card stock ??? 110 lb / 200 gsm, max
Envelopes ??? 20 to 24 lb / 75 to 90 gsm
Transparencies ??? all inkjet varieties with white stripe on short edge
Labels ??? all inkjet varieties on 216 x 279 mm (11 x 8.5") or A4 sheets
Paper sizes
The paper tray accepts the following paper sizes:
Metric units 102 x 152 mm 216 x 356 mm
The paper tray accepts the following standard paper sizes:
KODAK HERO 2.2
US letter (11 x 8.5" / 216 x 279 mm)
14 x 8.5" / 216 x 356 mm)
A4 (11.7 x 8.3" / 210 x 297 mm)
A5 (8.3 x 5.8 in. / 148 x 210 mm)
A6 (6 x 4" / 105 x 148 mm)
B5 (10 x 7" / 176 x 250 mm)
: Do not load paper smaller than 6 x 4" / 102 x 152 mm.
Envelope sizes
The printer accepts the following envelope sizes:
C5 (9 x 6.7" / 162 x 299 mm)
C6 (6.38 x 4.49" / 114 x 162 mm)
DL (designated long) (8.66 x 4.33" / 110 x 220 mm)
US #7 (7.5 x 3.9" / 178 x 127 mm)
US #9 (8.9 x 3.9" / 127 x 305 mm)
US #10 (9.5 x 4.12" / 105 x 241 mm)
: Do not load envelopes with cutout or clear windows.
Loading paper
Loading plain paper
The capacity of the paper tray is 100 sheets of plain paper.
Click to view a video that demonstrates loading plain paper. 1. Lift the paper input tray.
2.Move the left
3.Pull out the output tray and the extender until they are fully extended.
Handling Paper
4.Fan and stack the paper.
5.Move the ADF
6. Move the
Loading photo paper
The capacity of the paper input tray is 20 sheets of photo paper.
Click to view a video that demonstrates loading photo paper.
1.Remove any paper from the tray.
2.Move the left
3.Insert the paper (short side first) into the input tray with the logo side facing towards the tray and the glossy side towards you.
:Always load the paper short side first. The printer automatically detects the orientation of the picture, whether it's portrait or landscape, and prints accordingly. If the photo paper is loaded in the wrong direction, the image will be cut off and the paper may jam. If the paper is loaded with the wrong side up, the image quality will be affected.
4.Move the
KODAK HERO 2.2
Loading envelopes
The capacity of the paper input tray is 20 envelopes.
: Do not load envelopes with cutout or clear windows.
1.Remove any paper from the tray.
2.Move the left
3.Insert the envelope(s) into the tray with the flap away from you and the top of the envelope against the right side of the tray.
4. Move the
Loading originals
You can place originals for copying, scanning or faxing on the scanner glass or in the ADF (Automatic Document Feeder). The ADF automatically feeds the originals into the printer when you begin copying, scanning or faxing.
:Keep the scanner glass clean. Any dirt or smudges on the glass will appear as marks on the copy. See Cleaning the scanner glass and document backing, 69.
Using the scanner glass
1.If necessary, remove any originals from the ADF.
2.Lift the scanner lid and place the original face down in the front
Handling Paper
3. Close the scanner lid.
Using the Automatic Document Feeder (ADF)
You can load up to 25 originals (20 to 24 lb / 75 to 90 gsm plain paper) in the automatic document feeder (ADF). The ADF accepts originals in the following sizes:
Minimum size Maximum size
Metric units 176 x 250 mm 216 x 297 mm
:Do not load photographs, cards or any paper stock heavier than 24 lb / 90 gsm or lighter than 16 lb / 60 gsm in the ADF.
1.Remove any originals from the scanner glass.
2.Move the ADF
3.Fan and stack the originals, then insert them face up in the ADF.
:Remove all paper clips and staples from the originals.
KODAK HERO 2.2
4. Move the ADF paper edge guides until they touch the paper.
The ADF automatically feeds the originals into the printer when you begin copying, scanning or faxing.
5 Printing
Print documents and
Printing documents
Printing
The default is for documents to print on one side of the paper.
To print a document from your computer:
1.Open the document.
2.Select File > Print.
3.In the Print dialog box, select your KODAK Printer.
4.Choose the pages to print, number of copies, etc, then click OK (on a computer with WINDOWS OS) or Print (on a computer with MAC OS).
Printing
You can print
Automatic
The duplexer can print
letter (11 x 8.5" / 216 x 279 mm)
A4 (11.7 x 8.3" / 210 x 297 mm) B5 (10 x 7" / 176 x 250 mm)
:The paper width must be 3.9 to 8.5" / 99 to 216 mm. The paper length must be 7 to 11.7" / 178 to 297 mm.
The duplexer cannot print: 
borderless prints
poster layout
Automatic
1.Load plain paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that KODAK HERO 2.2 AIO is selected (printers with a wireless connection have a
4.Select the Layout tab.
5.In the
:You can also select automatic
6.Under "Flip on:", select Long edge or Short edge, then click OK.
7.Click OK to start the print request.
KODAK HERO 2.2
Automatic
1.Load plain paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that Eastman Kodak Company HERO 2.2 AIO is selected (printers with a wireless connection have a
4.In the Copies & Pages
5.In the
6.Click Print.
Manual
You can print
:
Manual
1.Load paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that KODAK HERO 2.2 AIO is selected (printers with a wireless connection have a
4.Select the Layout tab.
5.In the
:You can also select manual
6.Under "Flip on:", select Long edge or Short edge, then click OK.
7.Click OK to start the print request.
8.When a message appears on your computer and control panel, remove the printed pages from the output tray, then follow the instructions on the control panel.
9.Press 
on the control panel.
Manual
1.Load paper into the paper tray.
2.Open the document you want to print, then select File > Print.
3.In the Print dialog box, make sure that Eastman Kodak Company HERO 2.2 AIO is selected (printers with a wireless connection have a
4.In the Print dialog box, select the
5.Click Print.
6.When the even pages have finished printing, follow the instructions on the control panel to reload the printed pages in the paper input tray.
7.Press 
on the control panel to print the
Printing
Printing forms from the control panel
You can print the following forms from the control panel:
Graph Paper
Wide Ruled
Narrow Ruled
Shopping List
Reminder List
Noughts and crosses
Sheet Music (Portrait)
Sheet Music (Landscape)
To print a
1.Press 
.
2.Press 
to select Printable Forms, then press OK.
3.Press 
to select a form.
4.Press 
or 
to select a quantity (up to 99), then press OK.
5.Press 
.
Printing pictures
You can print pictures with your
A memory card inserted into a memory card slot
An iPhone, iPod Touch, iPad, BLACKBERRY Device, ANDROID OS Device or WINDOWS Mobile Device (may not be available with all models). For more information, go to www.kodak.com/go/mobile.
You can also print pictures using Home Centre Software from your computer with WINDOWS OS. Home Centre Software lets you edit and enhance your pictures quickly. Open Home Centre Software, select Edit and Print Pictures, then follow the
On a computer with MAC OS or WINDOWS OS, you can print pictures from any
Viewing pictures on a memory card
When you insert a memory card into the memory card slot a picture appears on the LCD screen. Press 
or 
to scroll through the pictures.
Finding pictures on a memory card
Your printer can help you locate pictures on a memory card by the date the picture was taken or last saved.
1.Insert the memory card into the memory card slot.
2.Press 
.
3.Press 
to select Find Photos, then press OK.
4.Press 
to select Year, Month and Day, then press 
or 
to set the values.
KODAK HERO 2.2
The number of photos found for the date you specified appears under the menu name. 5. Press OK to view the pictures.
Printing from a memory card
You can print pictures from the following cards:
SD Card
SDHC Card
MMC Card
MEMORY STICK
Variations of the memory cards listed above that require an adaptor (for example, MEMORY STICK Duo, miniSD and microSD)
:If you use a memory card with an adapter, make sure you insert and remove the adapter and the memory card as a unit; do not remove the memory card while leaving the adapter in the printer.
Using default settings to print a picture
Unless you change the default settings, the default for printing pictures is one 6 x 4" / 102 x 152 mm picture. (To change the default settings, see Save as Defaults at the bottom of the table under Changing the settings and printing pictures, 35.)
1. Insert the memory card into the memory card slot.
2.Press 
or 
, then press OK to select the picture(s) you want to print.
3.Press 
.
The printer prints a single 102 x 152 mm / 102 x 152 mm picture.
:To prevent loss of data from your memory card, camera or portable drive, do not remove it from the printer while printing.
Changing the settings and printing pictures
You can change the print photos options for an individual picture or group of pictures, or you can change the settings and save them as the default.
1. Insert the memory card into the memory card slot.
Printing
2.Press 
or 
, then press OK to select the picture(s) you want to print.
3.Press 
for Print Photos Options.
4.Press 
to select an option (see table below), press OK, then press 
or 
to change the setting.
:You can also adjust the print photo settings using the Online Printer Management Tool. When viewing the tool in your browser (see Accessing the Online Printer Management Tool, 11), select the
Settings tab, then select Copy & Print > Print Photo.
5.When you have finished changing settings, press 
.
:To prevent loss of data from your memory card, camera or portable drive, do not remove it from the printer while printing.
Printing tagged pictures
Some digital cameras let you tag (or "mark") pictures on the memory card for printing. This creates a tag that is recognised by the printer. If you choose to print tagged pictures, they will print according to the default settings on your printer (unless otherwise specified by the tag from the camera).
:Refer to your camera user guide to determine whether your camera supports tagged pictures (may also be called "marked" or "DPOF") functionality.
To print tagged pictures:
: Make sure Tagged Images Printing is On (see Configuring printer settings, 3). 1. Insert the memory card into the memory card slot.
2. When the "Print tagged images?" message appears, press 
.
Printing
Printing panoramic pictures
To print a panoramic picture, load 12 x 4" / 102 x 305 mm paper or US letter or A4 paper in the paper tray. 1. Insert the memory card into the memory card slot.
2.Press 
or 
to find the panoramic picture you want to print, then press OK.
3.Press 
for Remote Printing Settings.
4.Press 
to select Print Size, then press 
to select 4 x 12.
5.Press 
.
:To prevent loss of data from your memory card, camera or portable drive, do not remove it from the printer while printing.
Printing from a wireless device
You can print pictures wirelessly at the touch of a button from:
iPhone (iOS 3.0 or later)
iPod Touch (2nd generation) iPad
BLACKBERRY Device (software v4.5 or later)
a device running ANDROID OS v2.0 or later
WINDOWS Mobile Device v7.5 or later
For more information, see Mobile Printing , 40.
Transferring pictures to a computer
You can transfer your pictures from a memory card to your computer. To transfer these files, the printer must be connected to your computer with a USB cable.
:If you have large video files or a large number of pictures (400 or more), we recommend that you transfer them using a memory card reader attached directly to your computer.
KODAK HERO 2.2
Transferring pictures to a computer with WINDOWS OS
1.Insert the memory card into the memory card slot on the printer.
2.Press 
.
3.Press 
to select Transfer to PC, then press OK.
4.Press 
.
5.If your computer is connected to a wireless network and with a USB cable, select the
6.Follow the
Transferring pictures to a computer with MAC OS
1.Insert the memory card into the memory card slot on the printer.
2.Press 
.
3.Press 
to select Transfer to PC, then press OK.
4.Press 
.
5.If your computer is connected to a wireless network and with a USB cable, select the
6.Use iPhoto or Image Capture on your computer to complete the transfer.
:You can also adjust the print photo settings using the Online Printer Management Tool. When viewing the tool in your browser (see Accessing the Online Printer Management Tool, 11), select the
Settings tab, then select Copy & Print > Print Photo.
6 Mobile Printing
Mobile printing lets you print to your
printer is registered to Google Cloud Print???, you can print from anywhere with your mobile device using Google Cloud Print apps.
printer has an
mobile device is connected to the same wireless network as your printer, you can print pictures using a KODAK Pic Flick App or Pic Flick HD App.
When you plan to use mobile printing, make sure that your printer power is on or your printer is in low power mode (for information, see Time to Low Power under Configuring printer settings, 3).
Printing using Google Cloud Print
Print on the go from your smartphone, computer or tablet using Google Cloud Print enabled apps.
Before you can use Google Cloud Print, make sure your printer is set up for Google Cloud Print. See Registering your printer with Google Cloud Print??? and KODAK
Printing varies by application. For more information, go to www.google.com/cloudprint/learn/apps.html.
To print from a Chromebook:
Click the wrench and select Print to print the Web page you are viewing (you can also use the keyboard shortcut
Ctrl+P).
To print from an iOS mobile device (iPhone, iPad, iPod Touch):
From GMAIL:
-
-Attachment: Click the Print button next to the attachment.
From GOOGLE DOCS Program:
-Select the document, then click the menu in the
To print from an ANDROID OS device:
Install the KODAK Document Print App from the GOOGLE PLAY Store.
To print from a computer:
1.Install the latest version of GOOGLE CHROME Web browser.
2.Click the wrench in the upper
3.In the Destination
4.Sign in using your GOOGLE Account as needed, then select your printer.
To print from a BLACKBERRY OS device:
KODAK HERO 2.2
We recommend using KODAK
Printing using KODAK
Printing
KODAK
:Before you can use KODAK
To print using KODAK
1.Make sure that your device or computer is connected to the internet.
2.Open an
3.Address the
4.Send the
The
Printing pictures from a mobile device
When connected to the same
an iPhone (iOS 3.0 or later), iPod Touch device (2nd generation), iPad (may not be available with all models).
a BLACKBERRY Device (software v4.5 or later).
a device running ANDROID OS v2.0 or later.
a WINDOWS Mobile Device v7.5 or later.
Download the KODAK Pic Flick App from the App Store directly from your device, then follow the procedure for your device. For information, go to www.kodak.com/go/mobile.
Printing pictures from an iPhone, iPad or iPod Touch device
: Requires iOS 3.0 or later.
To print a picture from an iPhone, iPad or iPod Touch device (2nd generation):
1.Make sure your device is connected to the same
2.Open the KODAK Pic Flick App on your device.
:For best results with an iPad, use the KODAK Pic Flick HD App.
3.Select the picture(s) you want to print, then select Choose Device.
4.Select your KODAK
5.Select Send.
Mobile Printing
Printing pictures from a BLACKBERRY Device
To print a picture from a BLACKBERRY Device (software v4.5 or later):
1.Make sure your BLACKBERRY Device is connected to the same
2.Open the KODAK Pic Flick App on your device.
3.Select the picture(s) you want to print.
4.Press the Menu key, then select Print.
5.Select your KODAK
:It may take a few minutes for the printer to appear in the Available Printers list.
6.Select the print size and enter the number of copies.
7.Select Print.
Printing pictures and documents from an ANDROID OS Device
: ANDROID OS v2.0 or later required.
To print a picture using KODAK Pic Flick App:
1.Make sure your device is connected to the same
2.Open the KODAK Pic Flick App on your device.
3.Select the picture(s) you want to print.
4.Select View/Edit to edit the picture(s), or go to step 5.
a.Press and hold the screen to enter the edit mode.
b.Rotate, move, pan, zoom or crop the picture.
5.Press Select Device, then select your KODAK
6.Select the print size.
7.Press Back, then select Send.
To print a picture or document using KODAK Document Print App:
:Before you can use KODAK Document Print App, your printer must be registered to Google Cloud Print??? (see Registering your printer with Google Cloud Print??? and KODAK
1.Download and install the app from the GOOGLE PLAY Store.
2.Launch the KODAK Document Print App.
3.Locate the picture or document you want to print.
4.Sign in with your GOOGLE Account, then select OK.
5.Select your printer from the list.
6.Select Print.
7 Copying
You can copy documents and photographs with your
Loading originals for copying
You can copy
:The ADF accepts plain paper originals from 6.9 to 8.5" (175 to 216 mm) wide and 9.8 to 11.7" (249 to 297 mm) long.
To copy a photo, documents on thick paper or a document that is too small or too large to fit in the ADF, place the original face down on the scanner glass.
For more information on loading originals, see Loading originals, 29.
Copying a document
You can copy a document using the default settings, or you can adjust the quantity, size, quality and brightness of your copies.
Using the default settings to copy a document
The default settings are either the factory default settings (see Resetting factory defaults, 78), or defaults that you have set on the printer (see Save as Defaults at the bottom of the table under Adjusting the settings and copying a document, 43).
1.Place the original document in the ADF or on the scanner glass.
2.Press 
.
3.Press 
or 
to select Copy Document.
4.Press OK.
5.Press 
.
:If you load the original document in the ADF, the ADF automatically feeds the document into the printer when you begin copying.
Adjusting the settings and copying a document
1.Place the original document in the ADF or on the scanner glass.
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
to select an option, then press 
or 
to change the setting.
Copying
Changing the number of copies of a document
1.Place the original document in the ADF or on the scanner glass (see Loading originals, 29).
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
or 
to select a number.
5.Press 
to begin copying.
Enlarging or reducing the size of a copy
1.Place the original document on the scanner glass (see Loading originals, 29).
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
to select Copy Size.
5.Press 
or 
to select an enlargement or reduction percentage.
6.Press 
to begin copying.
KODAK HERO 2.2
Darkening or lightening a copy
1.Place the original document in the ADF or on the scanner glass (see Loading originals, 29).
2.Press 
.
3.Press 
to select Copy Document, then press OK.
4.Press 
to select Brightness.
5.Press 
or 
to select a number below zero for a darker copy or select a number above zero for a lighter copy.
6.Press 
to begin copying.
Copying a photo
You can copy a photo using the default settings, or you can make adjustments to the quantity, size, quality and brightness of your copies.
Using the default settings to copy a photo
The default settings are either the factory default settings (see Resetting factory defaults, 78), or defaults that you have set on the printer (see Save as Defaults at the bottom of the table under Adjusting the settings and copying a photo, 45).
1. Lift the scanner lid, and place the original photo face down in the front
:Do not load photos in the Automatic Document Feeder (ADF).
2.Close the scanner lid.
3.Press 
.
4.Press 
to select Copy Photo.
5.Press
.
Adjusting the settings and copying a photo
1. Lift the scanner lid, and place the original photo face down in the front
Copying
:Do not load photos in the Automatic Document Feeder (ADF).
2.Close the scanner lid.
3.Press 
.
4.Press 
to select Copy Photo, then press OK.
5.Press 
to select an option, then press 
or 
to change the setting.
KODAK HERO 2.2
Changing the number of copies of a photo
1. Lift the scanner lid, and place the photo face down in the
:Do not load photos in the Automatic Document Feeder (ADF).
2.Close the lid.
3.Press 
.
4.Press 
to select Copy Photo, then press OK.
5.Press 
or 
to select a number.
6.Press 
to begin copying.
Enlarging or reducing the size of a copy of a photo
1. Lift the scanner lid, and place the photo face down in the
:Do not load photos in the Automatic Document Feeder (ADF).
2.Close the lid.
3.Press 
.
4.Press 
to select Copy Photo, then press OK.
5.Press 
to select Copy Size, then press 
or 
to change the size.
6.Press 
to begin copying.
Copying
Manual
If the original is not on letter or
1.Load the paper into the paper tray.
2.Place your original on the scanner glass (see Using the scanner glass, 29).
3.Press 
.
4.Press 
to select Copy Document, then press OK.
5.If necessary, press 
to make changes to the copy settings.
6.Press 
to begin copying.
7.Remove the printed page from the output tray and rotate it 180 degrees, then place the page into the paper tray
(printed side down).
8.Place the next original on the scanner glass.
9.If necessary, press 
to make changes to the copy settings.
10.Press 
to begin copying.
8 Scanning
Scanning digitises documents and pictures, and sends the digital files to your computer, memory card,
To scan to a computer, the Home Centre Software must be installed on that computer, unless you are using the Online Printer Management Tool. (See Scanning from the Online Printer Management Tool, 54.)
When you scan, the digital file can:
open in Home Centre Software (when Home Centre Software is loaded and the printer is connected to a computer with WINDOWS OS).
open in
be saved in a format and location that you determine (see Changing the scan settings for scanning from the printer control panel, 49).
Scanning from a software program on the computer (such as Home Centre Software) gives you more options, but you can also scan from the printer control panel.
Before you begin scanning
If you are scanning to a computer, make sure that the printer is connected to the computer using a USB cable or wireless network (see Networking Your Printer, 5).
If you want to scan to an
make sure the printer is connected to the computer using a wireless connection.
set up a profile using the Online Printer Management Tool (see Setting up Scan To
Changing the scan settings for scanning from the printer control panel
Before you scan from the printer control panel, you must adjust the scan settings.
:These settings do not apply to Scan to
1.Open Home Centre Software, then select the Printer Tools (WINDOWS OS) or Tools (MAC OS) window.
:To get to Printer Tools without Home Centre Software (WINDOWS OS only), select Start > All Programs > Kodak > KODAK AIO Printer Tools.
2.Under the Tools heading, select Printer Scan Settings.
3.Adjust settings for scanning documents and pictures:
a.To select a program that your scanned images or documents will appear in when you scan from the printer control panel:
(1) Select the General tab.
(2) Under the Program List heading, click 
next to the currently selected program.
(3) From the list, select the program in which you want the scanned files to open.
b.To adjust settings for scanning documents, select the Document tab, then select an option for each setting:
Scanning
c.To adjust settings for scanning pictures, select the Picture tab, then select an option for each setting:
NOTE: Before you save a scanned file in Home Centre Software, you can preview, crop and sharpen the image, and adjust the colour. On a computer with WINDOWS OS, see the Home Centre Software Help (? icon) for instructions.
4.When you have finished making selections, click OK on the bottom right of the Printer Scan Settings window.
5.Close the Printer Tools window.
Loading originals for scanning
You can scan
Automatic Document Feeder (ADF).
:The ADF accepts plain paper originals from 6.9 to 8.5" (175 to 216 mm) wide and 9.8 to 11.7" (249 to 297 mm) long.
To scan a photo, documents on thick or thin paper or a document that is too small or too large to fit in the ADF, place the original face down on the scanner glass.
For more information on loading originals, see Loading originals, 29.
Scanning from the printer control panel
When you scan a document or picture(s) from the control panel, you have the following options:
Scan to Computer - scans to a file or to Home Centre Software on your computer
Scan to Memory Card - scans to a memory card in the memory card slot
Scan to
Scan to Network Folder* - scans to a shared network folder that you designated in the Online Printer
Management Tool
* Before you can use these options, you must set up Scan to
Scanning to a computer
1.Press 
.
2.Press 
to select Scan, then press OK.
3.Press 
to select Scan to Computer, then press OK.
4.Press 
to select an option, then press 
or 
to change the setting.
Scanning
5.Press 
. The scanned file appears at the destination you specified.
6.Follow the
Scanning to a memory card
1.Insert the memory card into the memory card slot on the printer.
2.Press 
.
3.Press 
to select Scan, then press OK.
4.Press 
to select Scan to Memory Card, then press OK.
5.Press 
to select an option, then press 
or 
to change the setting.
6. Press 
. The scanned file appears on the memory card.
Scanning to
You can scan your original and immediately send the scanned file by
:You must first use the Online Printer Management Tool to set up scanning to
1.Press 
.
2.Press 
to select Scan, then press OK.
3.Press 
to select Scan to
4.Select an outgoing
OK.
5.If necessary, enter the
6.Select an
7.Repeat step 5 for each recipient.
8.Press 
.
Scanning to network folder
You can scan your original and immediately send the scanned file to a network folder directly from the printer.
:You must first use the Online Printer Management Tool to set up scanning to network folder options (see Setting up Scan To Network Folder, 19).
1.Press 
.
2.Press 
to select Scan, then press OK.
3.Press 
to select Scan to Network Folder, then press OK.
4.Select Sharing folder, then press OK.
5.If necessary, enter the
6.Press 
.
Scanning from the computer
1. Open Home Centre Software, then:
Scanning
on a computer with WINDOWS OS, select Scan Documents and Pictures, then follow the
on a computer with MAC OS, select the Tools tab, click Scan Application, then follow the
:If you are not using Home Centre Software, open a program that allows you to scan, then follow the instructions.
Scanning multiple pictures simultaneously
Using Home Centre Software, you can scan multiple pictures simultaneously and save them as separate files.
When scanning multiple pictures, leave space between the pictures so that the printer can detect the separate pictures. Any pictures that overlap are interpreted as a single picture.
Scanning multiple pictures when connected to a computer with WINDOWS OS
1.Lift the scanner lid, and place the pictures face down on the glass, leaving space between the pictures.
2.Close the scanner lid.
3.Open Home Centre Software, then select Printer Tools.
4.Under the Tools heading, select Printer Scan Settings, then select the Picture tab.
5.Select Automatically Detect Pictures, if it is not selected, then click OK.
6.Click the X in the
7.In the Home Centre window, select Scan Documents and Pictures.
8.Make sure that Picture is selected and Collage - Combine all pictures is cleared, then follow the
:Click Help (? icon) for additional instructions.
Scanning multiple pictures when connected to a computer with MAC OS
To scan multiple pictures simultaneously and save them as separate files:
1.Lift the scanner lid, and place the pictures face down on the glass, leaving space between the pictures.
2.Close the scanner lid.
3.Open Home Centre Software, then select your printer.
4.Select the Tools tab.
5.Click Scan Application.
6.Select Colour Picture or Black and White Picture.
7.Select Automatically detect multiple pictures, if it is not selected.
8.Click Preview or Scan All, then follow the
:Click Help (? icon) for additional instructions.
Scanning from the Online Printer Management Tool
You can use an Internet browser to initiate a scan from the Online Printer Management Tool on a computer that is connected to the same network as the printer.
KODAK HERO 2.2
1.Open the Online Printer Management Tool in a browser (see Accessing the Online Printer Management Tool, 11).
2.Select the Applications tab.
3.Select Applications > Webscan in the left pane.
4.Load the original (see Loading originals for scanning, 51).
5.Select the type of scan you want.
a.Select Picture or Document.
b.Select Colour or Black & White.
6.Click Preview to see what will be scanned.
If needed, click Clear to reposition the original.
7.When you are satisfied with the preview, click Scan. The scanned file will display in a new browser window.
8.In the new browser window, select File > Save As to save the file as a JPEG image on your computer.
9 Faxing
Your printer can send and receive faxes in either black and white or colour.
Before you begin faxing
Before you can send or receive faxes, you must connect your printer and set up the fax options.
Connecting the printer for faxing
Selecting the country/region
For the fax to work properly, the country or region selected on the printer must match your location. This setting determines how your faxes are sent and received.
1.Press 
.
2.Press 
to select Printer Settings, then press OK.
3.Press 
to select Country/Region, then press OK.
4.Press 
to select your country or region, then press OK.
Determining your telephone system type
The instructions for setting up your printer for faxing differ depending on the type of telephone service you have. Determine the type of telephone service you have, and connect your printer accordingly.
:Use the phone cord that was provided with the printer. If you use any other phone cord, you may not be able to send or receive faxes successfully.
Standard telephone service ??? telephone service that uses dedicated telephone wiring to transmit only phone signals
Cable telephone service ??? telephone service that is delivered by a cable television service
Digital Subscriber Line (DSL) ??? telephone service that uses the wires of a local telephone network to transmit digital data over cables
Internet telephone service
Connecting to a Standard or Cable telephone service
If you have Standard or Cable telephone service, connect one end of the phone cord that came with the printer to the LINE IN port on the back of the printer and the other end to the wall phone jack.
KODAK HERO 2.2
Connecting to a Digital Subscriber Line (DSL)
If you have DSL telephone service, connect one end of the phone cord that came with the printer to the LINE IN port on the back of the printer and the other end to the DSL filter (available from your DSL provider), which is connected to the wall phone jack.
: You must use a DSL filter to transmit fax signals properly to your printer.
Connecting to Internet telephone service
If you have Internet telephone service, you should already have a cable modem/router connected to the cable socket with a coaxial cable. You will also need an Analogue Telephone Adaptor (ATA) to connect your printer for faxing.
:Sometimes the cable modem/router has a
1.Connect an
2.Connect one end of the phone cord that came with the printer
Determining whether your phone line is dedicated or shared
To connect your printer for faxing correctly, you need to determine whether your phone line is shared or dedicated.
A dedicated phone line is one that has only this printer and no other devices connected to it. If you have a dedicated line, connect your printer as described for your type of phone service (see Connecting to a Standard
Faxing
or Cable telephone service , 56, Connecting to a Digital Subscriber Line (DSL) , 57 or Connecting to Internet telephone service
A shared phone line is one that has several devices connected to it, such as a phone and/or answering machine as well as the printer. If you have a shared line, connect your printer in one of the following ways, based on the devices you have connected to the same phone line.
If you share the line with an answering machine or telephone:
1.Connect one end of the phone cord that came with the printer to the LINE IN phone port on the back of the printer.
2.Connect the other end of the phone cord to either a wall phone jack or a DSL filter, depending on the type of telephone service you use.
3.Connect one end of the phone cord for your answering machine to the EXT OUT phone port on the back of the printer.
4.Connect the other end of the phone cord to the answering machine or telephone.
:If you have an answering machine, set the number of rings to answer on the printer to a higher number than the rings to answer for the answering machine (see Rings to Answer in the table under Selecting fax settings, 59).
If you have an answering service:
If you have an answering service that uses a computerised system for recording messages remotely for the same phone line that you use for your
If you do not set up a distinctive ring, you can still receive faxes manually (see Receiving a fax manually , 67).
Entering fax sender information
Fax sender information appears in the header of any fax that you send from your
: If you do not enter fax sender information, the header on faxes that you send will be blank.
KODAK HERO 2.2
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Fax Sender Information, then press OK.
4.Use the numeric keypad on the control panel to enter:
your name or business name
your fax number
your phone number
See Using the numeric keypad on the control panel to enter text and/or numbers, 63.
5.When you have finished entering information in a field, press 
to move to the next field.
6.Press OK to save the information.
Selecting fax settings
Before sending or receiving faxes, set the fax settings.
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
or 
to select a setting, then press 
or 
to change the option.
Faxing
To adjust fax settings from the Online Printer Management Tool:
1.Open the Online Printer Management Tool in a browser (see Accessing the Online Printer Management Tool,
11).
2.Select the Settings tab, then select Fax > Settings.
3.Change the Sender Information and/or fax Settings as needed.
4.Click Save to update the settings.
Setting the answer mode (auto answer or manual)
The default setting is for Auto Answer to be on. When Auto Answer is on, the printer picks up all incoming faxes automatically.
To answer calls manually, turn off Auto Answer. (See Receiving a fax manually , 67.)
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
Faxing
3.Press 
to select Fax 
to select Off.
4.Press OK to save the setting.
Working with the phonebook
You can enter up to 60 fax numbers in the phonebook.
You can create and manage the phonebook from the printer LCD, or if connected to a computer with WINDOWS OS, you can use Home Centre Software.
You can also use the Online Printer Management Tool to edit the Fax Phonebook. See Using the Online Printer Management Tool to edit the Fax Phonebook, 64.
Using symbols in phonebook entries
The following symbols are used in phonebook entries:
Adding a new phonebook entry
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press OK to select Fax Options.
4.Select Edit Phonebook, then press OK.
5.Press 
to select Add New Entry, then press OK.
6.Press 
to select Number, then press OK.
7.Use the numeric keypad on the control panel to enter a fax number, then press OK.
8.Select Name, then press OK.
9.Use the LCD keyboard to enter a name:
a.On the control panel, press 
, 
, 
or 
to select the letters.
b.When you have finished, select DONE, then press OK.
10.Optional: Assign a Quick Dial number.
Set up your ten most frequently used fax numbers as Quick Dial numbers. You will be able to dial them quickly, and they will be displayed at the top of your phonebook.
KODAK HERO 2.2
a.Press 
to select Quick Dial, then press OK.
b.Using the numeric keypad on the control panel, enter a number from 0 to 9, then press OK.
11.Press 
to select DONE, then press OK.
Editing a phonebook entry
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press OK to select Fax Options.
4.Select Edit Phonebook, then press OK.
5.Press 
to select Edit Entry, then press OK.
6.Press 
to select the entry you want to edit, then press OK.
7.Press 
to select the field you want to edit, then press OK.
8.Use the LCD keyboard and/or numeric keypad to make your change(s).
9.Press 
to select DONE, then press OK.
Deleting a phonebook entry
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press OK to select Fax Options.
4.Select Edit Phonebook, then press OK.
5.Press 
to select Delete Entry, then press OK.
6.Press 
to select the entry you want to delete, then press OK.
:If you do not want to delete the entry, press 
.
7.To delete the entry, press OK.
The entry is deleted from the phonebook.
8.Repeat steps 4 ??? 5 to delete more entries; when you have finished, press 
.
Using the numeric keypad on the control panel to enter text and/or numbers
The number keys on the numeric keypad represent a number and several characters. For example, the number 2 key also represents the letters A, B, C and a, b and c. You must press the 2 key multiple times to enter a corresponding letter. For example, to enter the letter "B" as the first letter of a name, press the 2 key twice; to enter the lowercase "b" at the beginning of a name, press the 2 key five times. If the lowercase "b" is not at the beginning of a name or word, press the 2 key twice.
If you need to use the same key for more than one letter in a row (for example, to type "Cab"), you need to pause between letters. To type "Cab", press the 2 key three times to enter "C", then pause for 3 to 4 seconds; press the 2 key once to enter "a", then pause for 3 to 4 seconds; and press the 2 key twice to enter "b". You do not need to pause if the next letter is on a different key.
Note that the Symbols (*) key and the Space (#) key also cycle through several different symbols when you press the key multiple times.
To make a correction to your entry, press 
BKSP (navigation button) on the control panel to erase the
Faxing
Using the Online Printer Management Tool to edit the Fax Phonebook
1.Open the Online Printer Management Tool in a browser (see Accessing the Online Printer Management Tool, 11).
2.Make changes to your fax phonebook (see Adjusting fax settings, 14).
Preparing a fax for transmission
Before you send a fax, prepare a cover page (if needed), load the original(s) and change the resolution and brightness (if needed).
Printing a fax cover page
If you need a fax cover page, you can print one with your printer, then manually complete the information (person to whom you are sending, fax number, your name etc.).
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Cover Page, then press OK.
4.Load letter or A4 paper, then press 
.
Loading originals for faxing
To fax documents (up to 35 pages) that are on plain paper, load the original(s) face up in the automatic document feeder (ADF).
:The ADF accepts plain paper originals from 6.9 to 8.5" (175 to 216 mm) wide and 9.8 to 11.7" (249 to 297 mm) long.
To fax a photo, documents on thick or thin paper or a document that is too small or too large to fit in the ADF, place the original face down on the scanner glass. You can fax only one page at a time from the scanner glass.
For more information on loading originals, see Loading originals, 29.
Changing resolution and brightness
Before sending your fax, change the resolution and brightness settings, as needed, based on your original.
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Select Fax Options, then press OK.
4.Press 
to select Resolution.
The resolution setting determines the amount of detail that is transmitted. Select:
Standard (default) for most documents
Fine for documents with fine print
Photo for photographs
5.Press 
to select Colour or Black & White.
6.Press 
to select Brightness.
Adjust the brightness setting according to how light or dark your original is. Select:
KODAK HERO 2.2
Normal (default) for most documents +1 to +3 to lighten dark originals
:If you do not want to save these settings, send your fax. The settings will apply only to the current transmission. If you want to save these settings as defaults:
a.Press 
to select Save as Defaults, then press OK.
b.Select Yes, then press OK.
Sending a fax
You can send your fax in several ways. You can use:
the phonebook
Quick Dial
the numeric keypad the Redial button
Using the phonebook to send a fax
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press 
to select the desired number.
4.Press 
.
: If the receiver's fax machine is not set up to print colour, the fax will print in black and white.
Using Quick Dial to send a fax
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press the number on the keypad that corresponds to the desired Quick Dial entry.
4.Press 
.
: If the receiver's fax machine is not set up to print colour, the fax will print in black and white.
Using the numeric keypad to send a fax
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Enter a fax number using the numeric keypad.
4.Press 
.
: If the receiver's fax machine is not set up to print colour, the fax will print in black and white.
Faxing
Dialling a recently faxed number
1.Press 
.
2.Press 
to select Send Fax, then press OK.
3.Press 
to select Recent, then press OK.
4.Select the fax number, then press OK.
5.Press 
.
If there is no number to redial, press OK. The phonebook opens.
Sending a fax from your computer
To send a fax from your computer, you must have Home Centre Software installed on your computer.
Sending a fax from a computer running WINDOWS OS:
1.Open the document you want to fax, then select File > Print.
2.In the print dialog box, make sure that KODAK HERO 2.2 AIO Fax is selected, then click Properties or
Preferences.
3.Select a paper size (letter or A4) from the
4.Enter the fax number in the Enter Fax Number field, then click OK.
5.Click OK to send the fax.
Sending a fax from a computer running MAC OS:
1.Open the document you want to fax, then select File > Print.
2.Expand the print dialog box, if necessary.
3.Select Fax Options from the
4.Select a paper size (US Letter or A4 only) from the
5.Check the Send as Fax checkbox, then enter the fax number in the To field.
6.Select a fax quality (Standard or Best).
7.Click Print to send the fax.
Receiving a fax
You can set up your printer to receive faxes automatically or manually. Even if your printer is set up to receive faxes automatically, you can still receive them manually at any time.
Receiving a fax automatically
1.Load letter (11 x 8.5" / 216 x 279 mm) or A4 (11.7 x 8.3" / 210 x 297 mm) plain paper into the paper tray (see Loading plain paper, 27).
2.Make sure Fax
The printer will receive all incoming faxes automatically.
:Whenever there is an incoming fax, the printer LCD shows the message "Incoming Call. Press START to Answer". If the Auto Answer LED is on, you do not need to press START to receive the fax. The printer will automatically receive the fax after the number of rings that you selected for the fax settings (see Rings to Answer in the table
KODAK HERO 2.2
under Selecting fax settings, 59). However, you may choose to receive the fax sooner by pressing either START button. (Whether the fax is colour or black and white is determined by the sender.)
Receiving a fax manually
If Auto Answer is turned off for your printer, you can receive incoming faxes manually. : You can receive any incoming fax manually, even if Auto Answer is turned on.
To receive a fax manually:
When you hear the phone ring, press 
.
If your printer is connected to the same phone line as another telephone and you are using tone dialling (see Dialling Mode near the bottom of the table under Selecting fax settings, 59), you may receive an incoming fax manually from another phone. When you hear the distinctive ring of your fax line or know that the incoming call is a fax:
Pick up any phone and dial 234 (the remote access code).
Printing fax reports
You can set up the printer to print certain reports automatically. You can also print reports manually at any time.
Fax settings report
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Settings, then press OK.
4.Load letter (11 x 8.5" / 216 x 279 mm) or A4 (11.7 x 8.3" / 210 x 297 mm) plain paper, then press 
.
Fax confirmation page
The Fax Confirmation Page contains the time and date of transmission, the number that you called and the number you called from, and whether the transmission was successful. To print the Fax Confirmation Page, you must select the option to print it before you transmit the fax. The default setting is to never print the Fax Confirmation Page.
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Conf. Page.
4.Press 
or 
to select Always (to print a confirmation page after sending every fax) or After Fail Only to print only if the fax transmission fails.
5.Press OK.
:The name and fax number of receivers will not appear on your confirmation page if the receivers have not set up that information on their fax machines.
Fax activity log
The Fax Activity Log provides detailed information for approximately the last 30 faxes sent or received. The log contains information such as date, time, duration of transmission, to/from and number of pages.
Faxing
1.Press 
.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Activity Log, then press OK.
4.Load letter (11 x 8.5" / 216 x 279 mm) or A4 (11.7 x 8.3" / 210 x 297 mm) plain paper, then press 
.
:The name and fax number of receivers will not appear on your Fax Activity Log if the receivers have not set up that information on their fax machines.
Cancelling a fax
You can cancel a fax that you are sending or receiving at any time.
To cancel sending or receiving a fax, press 
.
10 Maintaining Your Printer
Your printer requires little maintenance. However, Kodak recommends cleaning the scanner glass and lid regularly to remove dust and fingerprints, which affect the quality and accuracy of scanning.
Except while cleaning the printer, keep the printer plugged into an AC power outlet. If you use a power strip, don't turn off the power strip. (The printer does not need to be turned on but should be plugged in.)
Keep the printhead and ink cartridges in the printer at all times to help prevent damage to the printhead.
For recycling and/or disposal information, contact your local authority. In the US, go to the Electronics Industry Alliance at www.eia.org or go to www.kodak.com/go/recycle.
General care and cleaning
:
Always disconnect the power to the printer before cleaning it. Do not use harsh or abrasive cleaners on any part of the printer.
To clean the printer, wipe the outside with a clean, dry cloth.
Keep the surrounding area vacuumed and
Protect the printer from tobacco smoke, dust and liquid spills. Do not place objects on the printer.
Keep the input tray free of dust, dirt and other foreign objects.
Keep the printer supplies away from direct sunlight and out of
Cleaning the scanner glass and document backing
The scanner glass can get smudged and minor debris can accumulate on the white document backing under the scanner lid. Periodically clean the scanner glass and document backing.
:
Do not use harsh or abrasive cleaners on any part of the printer. Do not spray liquid directly onto the glass. Do not use
To clean the scanner glass and document backing under the scanner lid:
1.Turn off the printer and unplug it from the power outlet.
2.Lift the scanner lid.
Maintaining Your Printer
3. Wipe the glass with a soft cloth or sponge, slightly moistened with a
4.Dry the glass with a
5.Gently clean the document backing with a soft cloth or sponge, slightly moistened with mild soap and warm water.
6. Dry the document backing with a chamois or soft,
KODAK HERO 2.2
:If the document backing needs further cleaning, use surgical spirit alcohol on a soft cloth, then wipe thoroughly with a cloth moistened with water to remove any residual alcohol.
7.When you finish cleaning, plug in the printer.
Replacing ink cartridges
Your printer uses black and colour ink cartridges. You can check the approximate ink levels on the LCD (see Checking ink levels, 78) or in Home Centre Software. When an ink cartridge is out of ink, the printer LCD displays a message stating that the black or colour ink cartridge needs replacing.
: Do not use
Click to view a video that demonstrates replacing the ink cartridges.
To replace an ink cartridge:
1.Make sure the printer is on.
2.Lift the access door, and wait for the carriage to move to the access position.
The ink cartridges are located in the printhead.
3. Pinch the tab on the ink cartridge.
Maintaining Your Printer
4. Lift the ink cartridge out of the printhead.
5. Remove the new ink cartridge from its bag.
:To prevent the printhead from drying out, insert the ink cartridge into the printhead immediately.
6.Remove the cap.
KODAK HERO 2.2
7. Insert the ink cartridge into the printhead.
8. Press down on the ink cartridge tab until you hear a click.
9. Close the access door.
Replacing the printhead
:Replacing the printhead is not a regular maintenance procedure. Replace the printhead only if you receive a new printhead from Kodak.
Click to view a video that demonstrates replacing the printhead.
To replace the printhead:
1.Make sure the printer is on.
2.Lift the access door, and wait for the carriage to move to the access position.
Maintaining Your Printer
3. Remove both ink cartridges and set them aside.
4. Unlatch the existing printhead by lifting the button.
5. Lift the printhead out of the carriage.
KODAK HERO 2.2
6. Remove the new printhead from its bag.
7. Remove the cap.
8. Install the new printhead in the carriage.
Maintaining Your Printer
9. Push firmly against the target label of the printhead until you hear a click.
10. Insert the black ink cartridge into the printhead.
11. Press down on the ink cartridge until you hear a click.
12. Repeat steps 10 - 11 for the colour ink cartridge.
KODAK HERO 2.2
13.Close the access door.
The printer detects the new printhead. Follow the instructions on the LCD to calibrate your printer.
Updating the software and printer firmware
Using the latest software and firmware helps ensure optimal performance of your printer.
: Firmware is the software that runs on the printer.
Although there is an automatic check for software and firmware updates when your computer is connected to the Internet, you can update manually using the following procedure.
Updating if your printer is connected to a computer with WINDOWS OS
To update the software:
1.Make sure that your computer is connected to the internet.
2.Open Home Centre Software, then select Printer Tools.
:If you do not have Home Centre Software, select Start > All Programs > Kodak > KODAK AIO Printer Tools.
3.Under Printer Resources, click Check for Software Updates to check whether software updates are available.
4.If there are updates, click Next and follow the
To update the printer firmware:
1.Make sure that your computer is connected to the internet.
2.Connect the printer to the computer with a USB cable or Ethernet cable or wirelessly (if not currently connected).
3.Open Home Centre Software, then select Printer Tools.
:If you do not have Home Centre Software, select Start > All Programs > Kodak > KODAK AIO Printer Tools.
4.Make sure that KODAK HERO 2.2 AIO - Connected (or a similar name with "Connected") appears in the lower
:If KODAK HERO 2.2 AIO - Connected does not appear in the lower
5.Under Printer Resources, select Check for Printer (Firmware) Updates.
6.If there are updates, click Next and follow the
Maintaining Your Printer
:Do not turn off or unplug your printer or your computer during the update. Doing so may cause the printer to become inoperable. If the printer is connected wirelessly, make sure you have a stable connection when you perform the update. During the upgrade, your printer will restart. Wait for the message, "Update complete! You may now use your Kodak Printer" to appear on your computer.
Updating if your printer is connected to a computer with MAC OS
To update the software:
1.Make sure that your computer is connected to the internet.
2.Open Home Centre Software.
3.Select the Tools tab.
4.Click Check for Software Updates.
5.If there are software updates, follow the
To update the firmware:
1.Make sure that your computer is connected to the internet.
2.Connect the printer to the computer with a USB cable or Ethernet cable or wirelessly (if not currently connected).
3.Open Home Centre Software.
4.Select the Tools tab.
5.Click Check for Printer (Firmware) Updates.
6.If there are updates, follow the
:Do not turn off or unplug your printer or your computer during the update. Doing so may cause the printer to become inoperable. Your printer will restart during the update.
Monitoring and adjusting printer performance
From the control panel, you can perform tasks to help keep the printer functioning well.
Checking ink levels
1.Press 
.
2.Press 
to select Maintenance, then press OK.
3.With Check Ink Levels selected, press OK.
The LCD shows approximate levels of ink in the cartridges so you know when it's time to order replacement cartridges. Use 30 Series ink cartridges.
NOTE: You can order ink cartridges online. Open Home Centre Software and select Order Supplies or go to www.kodak.com/go/printingsupplies.
Resetting factory defaults
1.Press 
.
2.Press 
to select Printer Settings, then press OK.
KODAK HERO 2.2
3.Press 
to select Reset All Settings, then press OK.
4.When you see the message "This will reset printer settings to factory defaults", press OK.
:Resetting factory defaults does not change the date and time, language or country/region.
11 Troubleshooting
Basic troubleshooting
If you experience an error with your printer, restarting your printer will sometimes fix the problem. Turn off your printer, wait five seconds, then turn on your printer.
If you are still experiencing a problem, use the following information to help troubleshoot your printer.
Troubleshooting
Getting help on the Web
For more troubleshooting information:
KODAK HERO 2.2
Status lights
The status lights indicate the condition of the printer. There are two status lights on the printer: one indicates power, the other indicates
Power status light
Blinks continuously The
Blinks intermittently The
To find and connect to an available wireless network within range, press OK, turn the
12 Product and Safety Specifications
The following specifications are subject to change without notice.
Features and Specifications
Print performance
Black print speed 8.5 ipm
Colour print speed 5.8 ipm
Print technology
Print quality modes Draft, Normal and Best on plain paper Photo quality mode on photo paper
Photo printing features
Optimise image quality for KODAK Photo Papers with barcode
Image enhancement KODAK PERFECT TOUCH Technology with Home Centre Software (from the computer only)
Copy document features
KODAK HERO 2.2
Copy photo features
Scanning features
Input paper tray
Paper capacity 100 sheets of 20 lb plain paper
20 sheets of photo paper, up to 12 mil (290 gsm) 20 envelopes
Tray size 6 x 4" to 14 x 8.5" / 102 x 152 mm to 216 x 356 mm
Output paper tray
Paper capacity 50 sheets of 20 lb plain paper
20 sheets of photo paper, up to 12 mil (290 gsm)
Product and Safety Specifications
Automatic document feeder (ADF) for originals
Paper capacity 35 sheets of 20 lb plain paper
Paper size limitations 6.9 to 8.5" wide / 176 to 216 mm wide 9.8 to 11.7" long / 250 to 297 mm long
Fax system
Fax phonebook 60 numbers
Paper types supported
Paper sizes supported
11 x 8.5" / 216 x 279 mm)
Index card stock 6 x 4" index cards (102 x 152 mm) 7 x 5" index cards (127 x 178 mm)
US Letter (11 x 8.5") (216 x 279 mm)
Envelopes C5 (9 x 6.38" / 162 x 299 mm)
C6 (6.38 x 4.49" / 114 x 162 mm)
DL (designated long) (8.66 x 4.33" / 110 x 220 mm)
US #10 (9.5 x 4.12" / 105 x 241 mm)
US #7 (7.5 x 3.9" / 178 x 127 mm)
US #9 (8.9 x 3.9" / 127 x 305 mm)
KODAK HERO 2.2
Ink cartridges
Ink handling
Ink life
Connectivity
Software support
Application support
Media support Plain paper, photo paper, envelopes, greeting cards, card stock and labels
Scanner support TWAIN and WIA, WIA2 (VISTA OS and WINDOWS 7), ICA (MAC OS) and TWAIN (on MAC OS 10.5), including segmentation scanning
Update support Software and firmware updates available through Web support
Physical specifications
Product and Safety Specifications
Warranty
Product One year from purchase (with proof of purchase)
Printhead One year from purchase (with proof of purchase)
System requirements
Computer with WINDOWS OS
Safety information
KODAK HERO 2.2
KODAK HERO 2.2
Always follow all warnings and instructions marked on the product. Use only the power source indicated on the product regulatory label.
Use only the power cord that comes with the product (or an approved power cord greater than or equal to H05W- F, 2G, 0.75 mm2). Using another power cord may cause fire and/or shock. Do not use the included power cord with any other equipment.
If you do not use this product for a long period of time, unplug it from the electrical outlet.
Always turn this product off by using the On/Off button. Wait until the On/Off button stops flashing before removing the power plug from the outlet.
Do not allow the power cord to become damaged or frayed.
If you need to use an extension cord with this product, make sure that the ampere rating of the product does not exceed the ampere rating of the extension cord.
Place the product on a flat, stable surface that extends beyond the product's base in all directions. This product will not operate properly if tilted or at an angle.
When storing or transporting this product, do not tilt or stand it on its side. Never turn this product upside down (ink can leak out of the product).
Avoid placing this product in an environment that is subject to rapid changes in temperature or humidity, mechanical shocks, vibration or dust. Do not place near radiators, heating vents or in direct sunlight.
Leave enough room around this product for sufficient ventilation.
Do not block this product's covers or openings, or insert any objects through slots. Do not use aerosol products inside or around this product.
Do not spill any liquid on this product.
Do not attempt to repair or service this product.
If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged or if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.
For Service Personnel:
:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to local instructions.
LCD screen safety
Use only a dry, soft cloth to clean the LCD screen. Do not use any liquid or chemical cleaners. If the LCD screen is damaged, contact Kodak immediately. If any of the solution from the display gets on your hands, wash them thoroughly with soap and water.
Ink cartridge safety
Keep all ink cartridges out of the reach of children.
If ink gets on your skin, wash with soap and water. If ink gets into your eyes, flush immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately.
For MSDS information on inks, go to www.kodak.com/go/MSDS.
:You will need the catalogue number from the ink package.
Product and Safety Specifications
Regulatory compliance
FCC statement
The United States Federal Communications Commission (in CFR 47 Part 15.105) has specified that the following notice be brought to the attention of the users of this product:
:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the product into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
:
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this product not expressly approved by Eastman Kodak Company might cause harmful interference and void the FCC authorisation to operate this product. The radiated energy from this product is well below the FCC radio frequency exposure limits. Nevertheless, the product shall be used in such a manner that the potential for human contact during normal operation is minimised. This product and any attached external antenna, if supported, shall be placed in such a manner as to minimise the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC exposure limits, human proximity shall not be less than 20 cm (8 inches) during normal operation.
Canadian statements
This product meets the applicable Industry Canada technical specifications.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian
Industry Canada (IC) Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your person.
European compliance statement
Hereby, Eastman Kodak Company declares that this KODAK
KODAK HERO 2.2
German compliance statement
:
This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflections at visual display workplaces, this device must not be placed in the direct field of view.
:
Das Ger??t ist nicht f??r die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen. Um st??rende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren Gesichtsfeld platziert verden.
Noise emissions for this equipment do not exceed 70 dB(A).
This equipment is not intended for use in the workplace in accordance with BildscharbV regulations. Das Ger??t ist nicht f??r die Benutzung am Bildschirmarbeitsplatz gem???? BildscharbV vorgesehen.
REACH Article 33 declarations
Go to www.kodak.com/go/REACH for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).
Power supply information
Certified External Power Supply that can be used with this product: Hipro
Waste electrical and electronic equipment labelling
In the European Union, do not discard this product as unsorted municipal waste. Contact your local authorities or go to www.kodak.com/go/recycle for recycling programme information.
ENERGY STAR?? Qualified
To conserve energy, this printer will enter a reduced power (sleep) mode automatically after 1 hour. You can adjust the delay time (in 0.5 hour increments) up to 4 hours. Increasing the delay time may result in reduced energy savings.
ENERGY STAR and the ENERGY STAR mark are registered U.S. service marks. As an ENERGY STAR partner, Kodak has determined that this product meets ENERGY STAR Guidelines for energy efficiency. For more information on the ENERGY STAR program, see www.energystar.gov.
Product and Safety Specifications
Warranty Information
Warranty
Kodak warrants Kodak consumer electronic products and accessories ("Products"), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Warranty Coverage
Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions stated herein. Warranty service will include all labour as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.
This warranty does not apply when failure is due to accident, alteration, modification, unauthorised service, misuse, abuse, use with incompatible accessories or attachments (such as
Your statutory rights are not affected.
Declaration of Conformity
