IBM_Computer_Drive

2X/4X/24X CD-ReWritable

Internal IDE Option Kit

OPTIONS

Contents

iii

Part 3: Appendixes

. . . . . . . . . . . . . . . . . . . . . . . . . .3-1 . . .

iv IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Safety: Read first

vi IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Part 1: Quick installation guide

1-1

environment.

1-2 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Part 1: Quick installation guide 1-3

1-4 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Part 1: Quick installation guide 1-5

4. Reconnect all devices. Make sure that the keyboard, mouse, and monitor cables are firmly attached.

5. Reconnect all ac power cords and turn on the computer.

3. Reinstall the computer cover.

To complete the installation of the drive:

Step 6. Completing the hardware installation

If you have a sound adapter, connect one of the included audio cables 1 to the device audio-out connector. Use the audio cable that has

connector that fits your sound adapter. Keep the other cable in case you use a different sound adapter in the future.

Be sure that the cables will not be pinched or crowded by the computer cover and that all other cable and power connections are secure.

Connect the drive to an available 40-pin connector on the IDE

interface cable, as shown 2 . Align the cable so that the color-coded edge is closest to the power-cable connector 3 . The interface cable

can have up to three connectors. For the best signal quality when you

are connecting only one device to the IDE cable, attach the connector

on one end of the cable to the IDE port and the connector on the other 1. Verify that the drive is securely mounted and the connectors are end of the cable to the device. Do not use the middle connector. Use firmly attached.

the IDE cable provided with this option if there is no cable attached to 2. Verify that the cables do not interfere with the computer cover the computer IDE port, or if there is only one device connector on the and do not block the power-supply fan blades or air-flow paths. computer IDE cable.

If you are connecting two devices to the IDE cable, attach the connector on one end of the cable and the remaining cable connectors

to the Master and Slave devices. Many computers have two cables for attaching up to four ATA devices. For best performance, attach fast

Step 5. Attaching the cables to the drive

The diagram below shows where to connect cables to the drive.

1-6 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Step 8. Updating your computer configuration

Part 1: Quick installation guide 1-7

4 Some CDs, such as multisession CDs, do not require formatting. For more information, see the online manual.

1-8 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Part 1: Quick installation guide 1-9

1-10 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Part 1: Quick installation guide 1-11

1-12 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Part 2: User???s guide

???Excessive dust

Using the drive controls and connectors

Front view of the drive

This button opens and closes the CD tray when you push it.

Rear view of the drive

1Reserved

2Audio-out connector

2-2 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Caring for a CD

computers.

Photo CD (single and multisession)

This format records Kodak Photo CDs.

Video CD

format.

2-4 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

4. Close the tray, either by pushing the Eject/Load button again, or by gently pushing on the tray.

Securing a CD in a tray with pullout clips

2-6 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Using the audio-CD program for Windows 3.x

To use the Windows 3.x audio utility:

4. Follow the on-screen instructions.

2-8 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

To read a data CD in OS/2:

Using a data CD in DOS

To read a data CD in DOS:

1. Turn on the computer.

10 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Part 3: Appendixes

Appendix A.

Safety Information

3-2 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

3-4 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

3-6 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

3-8 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

3-10 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Appendix B.

Product specifications

Physical specifications

Power requirements

Environmental requirements

Drive write/read speeds

Drive performance

Physical specifications

Environmental requirements

Write/Read speeds

Drive-performance specifications

7 The formatted capacity of 1 MB is approximately 1 000 000 bytes of data.

3-12 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

/T:n

3-14 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

Expanded Memory not present or not usable.

3-16 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

2. Allow SMARTDRV to cache CD-ROM accesses.

BASEDEV=IBMIDECD.FLT [Options]

The following parameter is available:

/V Instructs the computer to display installation details.

Changing the OS/2 installable file system driver

3-18 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit

If you have an IBM Micro Channel computer, an IDE device driver is available for Micro Channel architecture on the IBM Web site (http://www.ibm.com). Use the Web site search utility, and look for

IBM2IDE.ADD.

95desktop:

1.ClickStart .

2.Select Settings .