Humminbird_Cyclometer

Thank You

Thank you for choosing Humminbird??, America's #1 name in fishfinders. Humminbird?? has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird?? accessories offer the opportunity to upgrade and expand the capabilities of your Humminbird?? product.

Please have your product model name and serial number available before calling the factory. If you contact the factory by e-mail, please include your product model name and serial number in the e-mail, and use Request for Repair Authorization Number for your e-mail subject header. You should include your Repair Authorization Number in all subsequent communications about your unit.

For IN-WARRANTY service, complete the followingsteps:

???Obtain a Repair Authorization Number from the Humminbird?? Customer Resource Center.

???Tag product with your name, street address, phone number and your assigned Repair Authorization Number.

???Include a brief written description of the problem.

???Include a copy of your receipt (to show proof and date of purchase).

???Return product freight prepaid to Humminbird??, using an insured carrier with delivery confirmation.

For OUT-OF-WARRANTY service, complete the followingsteps:

???Obtain a Repair Authorization Number from the Humminbird?? Customer Resource Center.

???Include payment in the form of credit card number and expiration date, money order or personal check. Please do not send cash.

???Tag product with your name, street address, phone number and your assigned Repair Authorization Number.

???Include a brief written description of the problem.

???Return product freight prepaid to Humminbird??, using an insured carrier with delivery confirmation.

(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):

1-800-633-1468

By e-mail

(typically we respond to your e-mail within three business days):

cservice@johnsonoutdoors.com

For direct shipping, our address is:

Humminbird

Service Department

678 Humminbird Lane

Eufaula, AL 36027 USA

WARNING! This device should not be used as a navigational aid to prevent collision, grounding, boat damage, or personal injury. When the boat is moving, water depth may change too quickly to allow time for you to react. Always operate the boat at very slow speeds if you suspect shallow water or submerged objects.

WARNING! Disassembly and repair of this electron ic unit should only be performed by authorized service personnel. Any modification of the serial number or attempt to repair the origina l equipment or accessories by unauthorized individuals will void the warranty.

WARNING! This product contains chemicals known to the State of California to cause cancer and/or reproductive harm.

ENVIRONMENTAL COMPLIANCE STATEMENT: It is the intentio n of Humminbird?? to be a responsible corporate citizen, operating in compliance with known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our products.

WEEE DIRECTIVE: EU Directive 2002/96/EC ???Waste of Electrical and Electronic Equipment Directive (WEEE)??? impacts most distributors, sellers, and manufacturers of consumer electronics in the European Union. The WEEE Directive requires the producer of consumer electronics to take responsibility for the management of waste from their products to achieve environmentally responsible disposal during the product life cycle.

WEEE compliance may not be required in your location for electrical & electronic equipment (EEE), nor may it be required for EEE designed and intended as fixed or temporary installation in transportation vehicles such as automobiles, aircraft, and boats. In some European Union member states, these vehicles are considered outside of the scope of the Directive, and EEE for those application s can be considered excluded from the WEEE Directive requirement.

This symbol (WEEE wheelie bin) on product indicates the product must not be disposed of with other household refuse. It must be disposed of and collected for recycling and recovery of waste EEE. Humminbird?? will mark all EEE products in accordance with the WEEE Directive. It is our

goal to comply in the collection, treatment, recovery, and environmentally sound disposal of those products; however, these requirements do vary within European Union member states. For more information about where you should dispose of your waste equipment for recycling and recovery and/or your European Union member state requirements, please contact your dealer or distributor from which your product was purchased.

?? 2009 Humminbird??, Eufaula AL, USA.

NOTE: Your transducer may not look exactly like the transducer shown in the illustrations, but it will mount in exactly the same way.

Your Humminbird?? is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird?? does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. For complete details, see the Warranty section included in this manual.

Contact our Customer Resource Center at 1-800-633-1468 or visit our web site at www.humminbird.com.

Installation Overview

Following are instructions for the installation of this accessory. Before you start the installation, we encourage you to read these instructions carefully in order to get the full benefit from your Humminbird?? accessory.

If you find that any items are missing from your installation kit, call our Customer Resource Center at 1-800-633-1468 or visit our web site at www.humminbird.com.

In addition to the hardware supplied with your In-Dash Mounting Kit, you will need a reciprocating saw for cutting the dash material and masking tape to hold the mounting template in place.

Installation

Start by placing the components on the surfaces where you intend to install them before installation. Make sure that the surfaces you have chosen provide adequate protection from wave shock, and that all cables can reach the control head.

NOTE: If a cable is too short for your application, extension cables are available. Call the Humminbird?? Customer

Resource Center at 1-800-633-1468 for more information.

1.Locate a suitable, flat area of the dash to mount the control head. The control head requires a depth of at least 3 1/2 inches.

2.Tape the paper In-Dash Mounting template to the desired in-dash mounting location.

3.At a location inside the dotted line on the template, drill a hole large enough to insert blade of reciprocating saw. Carefully begin cutting toward the dotted line, then follow the dotted line around the template. Remove the template when finished.

?? 2009 Humminbird??, Eufaula AL, USA.

900 Series??? In-Dash Mounting Kit

4.Insert and tighten the two threaded rods into the two threaded inserts located on the back side of the control head. Peel off the adhesive-backed foam pads and place them on the back of the control head; make sure you notice the difference between the longer top/bottom and shorter side pads.

1-YearLimited Warranty

We warr an t the origina l re tail purc ha se r that produ ct s mad e by Humminbird?? have been manufactured free from defects in materials and workmanship. This warranty is effective for one year from the date of original

Humminbird?? Service Policy

Even though you'll probably never need to take advantage of our incredible service policy, it's good to know that we back our products this confidently. We do it because you deserve the best. We will make every effort to repair

Expansion ports -

use for future accessories

Foam Pads

Threaded

Insert

Threaded Rod

Cut Away

Dash

In-Dash

Bracket

Washers

Wing Nut

Cable Collector

Insert

retail purchase. Humminbird?? products found to be defective and covered by this warranty will be replaced or repaired free of charge at Humminbird?? option and returned to the customer freight prepaid. Humminbird?? sole responsibility under this warranty is limited to the repair or replacement of a product that has been deemed defective by Humminbird??. Humminbird?? is not responsible for charges connected with the removal of such product or reinstallation of replaced or repaired parts.

This warranty does not apply to a product that has been:

???Improperly installed;

???Used in an installation other than that recommended in the product installation and operation instructions;

???Damaged or has failed because of an accident or abnormal operation;

???Repaired or modified by entities other than Humminbird??.

your unit within three business days from the receipt of your unit at our factory. This does not include shipping time to and from our factory. Units received on Friday are typically shipped by the following Wednesday, units received Monday are typically shipped by Thursday, etc.

All repair work is performed by factory-trained technicians to meet exacting factory specifications. Factory-serviced units go through the same rigorous testing and quality control inspections as new production units.

After the original warranty period, a standard flat rate service charge will be assessed for each repair (physical damage and missing parts are not included). Any repairs made after the original warranty will be warranted for an additional 90 days after service has been performed by our factory technicians. You can contact our Customer Resource Center or visit our web site to verify the flat rate repair fee for your product (visit the Product Support section):

5.Insert the control head through the mounting hole from the front side of the dash. From the back side of the dash, align the two threaded rods on the rear of the housing with the two holes on the in-dash mounting bracket. Place a washer onto each threaded rod, then secure bracket by placing a wing nut onto each threaded rod and tighten fully.

6.Insert cable connectors into the proper recesses on the cable collector insert. The cable connectors are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong slots. If you don???t have a cable for every hole in the insert, install the blank plugs to protect the unit from the weather.

7.While holding cables in place in the cable collector insert, thread the cables through the slot in the bottom of the cable collector cover, line up the cable collector insert and cover, then slide the cover into place on the insert.

NOTE: The tab on the cable collector insert goes into the slot on the cover.

8.Attach the cable collector insert to the cable collector cover using the 2 Phillips screws provided.

9.Plug the cable collector assembly into the back of the control head. Cable connectors and cable sockets are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong sockets. Once the cable collector and all cables are plugged into the back of the control head, lock the assembly into place by threading the knurled screw into the threaded insert on the back of the housing. (Cable ties are provided to help you secure the cables in place by threading them through the available holes on the in-dash bracket).

NOTE: It is very important that the cable collector is used and secured in place in the In-Dash installation.

Plug Cable Connector Assembly to Back of Control Head

Knurled

Screw

Tab on

Insert

Slot on

Cable

Cover

Collector

Cover

Please retain your original receipt as a proof of the purchase date. This will be required for in-warranty service.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES,

OBLIGATIONS OR LIABILITIES ON THE PART OF HUMMINBIRD?? AND WILL

BE THE CUSTOMER'S EXCLUSIVE REMEDY, EXCEPT FOR ANY APPLICABLE

IMPLIED WARRANTIES UNDER STATE LAW WHICH ARE HEREBY LIMITED

IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. IN

NO EVENT WILL HUMMIN BIRD?? BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED

WARRANTY RELATING TO THE PRODUCTS.

Some states do not allow limitations on an implied warranty, or the exclusion of incidental or consequential damages, so the above exclusions may not apply to you. You may also have other rights, which vary from state to state.

http://www.humminbird.com

We reserve the right to deem any product unserviceable when replacement parts are no longer available or impossible to obtain. This Service Policy is valid in the United States only. This applies only to Humminbird?? products returned to our factory in Eufaula, Alabama. This Service Policy is subject to change without notice.

DOMESTIC (USA) CUSTOMERS:

PLEASE DO NOT RETURN THIS PRODUCT TO STORE FOR SERVICE

For all technical issues please call 1-800-633-1468 or visit www.humminbird.com, click SUPPORT.

Please reference product serial number and model number when contacting Humminbird??.

?? 2009 Humminbird??, Eufaula AL, USA.