Owner???s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product???s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Visit our website at: http://www.harborfreight.com

Email our technical support at: tech@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.

Copyright?? 2012 by Harbor Freight Tools??. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

Sa etf y

Setup

Ope atir on

Table of Contents

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

Addresses practices not related to personal injury.

Important Safety Information

General Tool Safety Warnings

ce

Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

aintenanM

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

3.KEEP WORK AREA CLEAN.

Cluttered areas and benches invite accidents.

4.DON???T USE IN DANGEROUS ENVIRONMENT. Don???t use power tools in damp or wet locations,

or expose them to rain. Keep work area well lighted.

5.KEEP CHILDREN AWAY. All visitors should be kept safe distance from work area.

6.MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys.

7.DON???T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. Don???t force tool or attachment to do a job for which it was not designed.

General Tool Safety Warnings (cont.)

Table A: RECOMMENDED MINIMUM WIRE GAUGE

FOR EXTENSION CORDS

(120 VOLT)

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using

an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table A shows the correct size to use depending on cord length and nameplate ampere rating.

If in doubt, use the next heavier gauge.

The smaller the gauge number, the heavier the cord.

10.WEAR PROPER APPAREL. Do not wear

loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended.

Wear protective hair covering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It???s safer than using your hand and it frees both hands to operate tool.

13.DON???T OVERREACH. Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

15.DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters, and the like.

16.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in

off position before plugging in.

17.USE RECOMMENDED ACCESSORIES. Consult the owner???s manual for recommended accessories. The use of improper accessories may cause risk of injury to persons.

18.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that

it will operate properly and perform its intended function ??? check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

20.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

21.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don???t leave tool

until it comes to a complete stop.

Safety

Setup

Operation

Maintenance

Sa etf y

Grounding Instructions

To prevent electric shock and death from incorrect grounding wire connection Read and follow these instructions:

110-120 V~ Grounded Tools: Tools with Three Prong Plugs

Setup

Ope atir on

1.In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

2.Do not modify the plug provided ??? if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

3.Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor.

If repair or replacement of the electric cord or plug is necessary, do not connect the equipment- grounding conductor to a live terminal.

4.Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.

5.Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool???s plug.

6. Repair or replace damaged or worn cord immediately.

Grounding

Pin

125 V~ 3-Prong Plug and Outlet (for up to 125 V~ and up to 15 A)

7.This tool is intended for use on a circuit that has an outlet that looks like the one illustrated above in

125 V~ 3-Prong Plug and Outlet. The tool has a grounding plug

that looks like the plug illustrated above in 125 V~ 3-Prong Plug and Outlet.

8.The outlet must be properly installed and grounded in accordance with all codes and ordinances.

9.Do not use an adapter to connect this tool to a different outlet.

Cut-Off Saw Safety Warnings

ce

aintenanM

1.For Your Own Safety Read Instruction Manual Before Operating Grinder

2.Wear eye protection.

3.Use grinding wheel suitable for speed of grinder.

4.Replace cracked wheel immediately.

5.Always use guards and eye shields.

6.Do not overtighten wheel nut.

7.Use only flanges furnished with the grinder.

8.Frequently clean grinding dust from beneath grinder.

9.Wear a full face shield over ANSI- approved safety goggles during use.

10.Do not grind with side of wheel unless wheel is specifically designed for that type of grinding.

11.Do not operate with ANY guard disabled, damaged, or removed. Moving guards

must move freely and close instantly.

12.The use of accessories or attachments not recommended by the manufacturer may result in a risk of injury to persons.

13.When servicing use only identical replacement parts.

14.Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area.

Cut-Off Saw Safety Warnings (cont.)

15.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

16.Industrial applications must follow OSHA guidelines.

17.Maintain labels and nameplates on the tool. These carry important safety information.

If unreadable or missing, contact Harbor Freight Tools for a replacement.

18.Avoid unintentional starting.

Prepare to begin work before turning on the tool.

19.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.

20.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

???Lead from lead-based paints

???Crystalline silica from bricks and cement or other masonry products

???Arsenic and chromium from

chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code ?? 25249.5, et seq.)

21.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code ?? 25249.5, et seq.)

22.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Safety

Setup

Vibration Safety

This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

1.Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check???ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud???s Disease should not use this tool. If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible.

2.Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury.

3.Use tools with the lowest vibration when there is a choice between different processes.

4.Include vibration-free periods each day of work.

5.Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.

6.To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately.

Operation

Save these instructions.

Maintenance

Sa etf y

Setup

Ope atir on

ce

Specifications

Setup - Before Use:

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

To prevent serious injury from accidental operation: Release the Trigger and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Functions

Handle

aintenanM

Page 6

Angle Guide

Base

Figure A

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Tool Set Up

To prevent serious injury from accidental operation: Release the pressure and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.

TO PREVENT SERIOUS INJURY:

Do not operate with ANY guard disabled, damaged, or removed.

Installing the Wheel

Safety

1.The Grinding Wheel MUST be:

???rated to at least 5000 RPM.

???no larger than 6" in diameter.

???fitted with a 5/8" round arbor hole.

???suitable for edge grinding, not surface grinding.

???dry and clean.

???proven undamaged by inspection and by the ring-test explained below.

2.Closely inspect the Grinding Wheel before mounting. Perform a ring-test on the wheel

(unless wheel is smaller than 4???) as follows:

a.Suspend wheel using a dowel or finger through the arbor hole.

Tap

Wheel

HereC

E

N

T

E

R

45??45??

b.Tap the flat side of the wheel with a light non- metallic object, such as a screwdriver handle, at a point 45?? from the vertical center line on each side of the wheel and 1 ??? 2 inches from the edge of the wheel (see Illustration).

c.Rotate the wheel 90?? and repeat the test until the entire wheel has been checked.

d.An undamaged wheel will give a clear tone. If cracked, there will be a dead sound

and not a clear ring.

3.Release the Safety Chain and guide the Housing to rest at its full upward position.

Moveable Guard

Swing open

Nut

Figure B

4.Loosen the Knob on the Moveable Guard and swing it open, exposing the Blade and Flange.

5.Using the included wrenches, hold the Spindle in place with the flat Wrench and loosen

the Outer Flange with the Pin Wrench.

6.Remove the Outer Flange and Blade, noting the orientation of each.

7.For wheels with paper gaskets (blotters) or metal gaskets: Slip the grinding wheel onto the

Spindle with the gasket first. The gasket should be centered on the grinding wheel and the wheel and gasket should rest flat against the Inner Flange.

WARNING: To prevent serious injury, gaskets must be used for all grinding wheels they are provided with.

Gaskets help prevent grinding wheel damage and wheel slippage, causes of wheel failure.

8.Thread the Outer Flange onto the Spindle and tighten in place with the Wrenches.

9.Swing the Moveable Guard back in place and tighten the Knob.

10.Lower the Housing and replace the Safety Chain.

Setup

Operation

Maintenance

Sa etf y

Two Locations

Quick Release

Figure C

The Clamp and Angle Guide are used together to hold the workpiece securely in place. The Angle Guide can be adjusted from 0 to 45?? for straight or angled cuts. Adjust the Angle Guide first, then secure the workpiece in place with the Clamp.

Setup

Ope atir on

ce

aintenanM

1.To adjust the Angle Guide:

a.Loosen both Bolts.

b.Turn the Angle Guide to the desired angle.

c.Retighten the bolts.

Note: The Angle Guide can be positioned in either pair of holes in the Base.

2.To secure a workpiece in the Clamp:

a.Turn the Handle counterclockwise a quarter turn.

b.Flip up the Quick Release.

c.Slide the clamp out as far as needed.

d.Position the work piece against the angle Guide.

e.Flip the Quick Release down onto the Clamp threads.

f.Push the Clamp against the workpiece.

g.Tighten the Handle clockwise to secure the workpiece.

Work Piece and Work Area Set Up

1.Designate a work area that is clean and well???lit. The work area must not allow access by children or pets to prevent distraction and injury.

2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to allow free movement while working.

3.Secure loose work pieces using the clamp to prevent movement while working.

Safety

General Operating Instructions

CAUTION! Friction from cutting will heat both the Wheel and the workpiece. Be careful when handling the workpiece and do not overwork the Cut-Off Saw as the Wheel can become damaged from overheating.

1.Release the Safety Chain and guide the Housing to rest at ifs full upward position.

2.Adjust the Angle Guide as needed.

3.Place the workpiece against the Angle Guide and the Clamp in place.

4.Plug the Power Cord into a 120V~ grounded, electrical outlet.

5.Squeeze and hold the Trigger to start the Saw.

6.With one hand on the Handle and the other hand clear, slowly bring the Saw down, letting the Saw do the work. Do not apply excessive force.

7.After making the cut, release the Power Switch and raise the Saw.

8.Wait until the unit comes to a complete stop then remove the workpiece.

9.To prevent accidents, turn off the tool and disconnect its power supply after use. Lower the Housing

and secure with the Safety Chain. Clean, then store the tool indoors out of children???s reach.

Setup

Operation

Maintenance

Sa etf y

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury from accidental operation: Release the Trigger and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

Setup

1.BEFORE EACH USE, inspect the general condition of the tool. Check for:

???loose hardware,

???misalignment or binding of moving parts,

???cracked or broken parts,

???damaged electrical wiring, and

???any other condition that may affect its safe operation.

2.After Use, wipe external surfaces of the tool with clean cloth.

3.Check and change the Carbon Brushes as needed.

4.WARNING! If the supply cord of this

power tool is damaged, it must be replaced only by a qualified service technician.

on

Changing Carbon Brushes

Ope atir

ce

Carbon Brush location

Cap

Figure D

1.The two Carbon Brushes are located on either side of the back of the Saw near the Base.

2.Remove the Caps with a Screwdriver (sold separately).

3.Slide out the Carbon Brushes, noting the direction of wear of each brush.

4.If they are worn to 3mm or less they need to be replaced.

5.Insert new Carbon Brushes and secure in place with the Caps.

6.If they are still in good condition, replace the brushes in the same orientation and secure in place with the Caps.

Note: When replacing Carbon Brushes, always replace both brushes.

aintenanM

Cut-off Wheel Storage and Handling

Troubleshooting

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.

Safety

Setup

Operation

Maintenance

Sa etf y

Setup

Ope atir on

ce

aintenanM

PLEASE READ THE FOLLOWING CAREFULLY

The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.

Record Product???s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.

Safety

Setup

Operation

Maintenance

Page 13

etf y

Parts List and Diagram

Parts List

Sa

Setup

Ope atir on

ce

aintenanM

Assembly Diagram

Safety

Setup

Operation

Maintenance

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. This warranty is expressly in lieu of all other

warranties, express or implied, including the warranties of merchantability and fitness.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

3491 Mission Oaks Blvd. ??? PO Box 6009 ??? Camarillo, CA 93011 ??? (800) 444-3353