3

G60

489

G30

W650

G650

MIG II

GENERATOR PROTECTION

The G60 Generator Protection System, a member of the UR Family of protection relays, provides protection for AC generators. It may be used on any size of generator driven by steam, gas, hydraulic or other turbines.

The G30 Generator Protection System, part of the UR family of protection relays, provides protection for small to medium sized generators and for applications needing combined generator and transformer protection.

The 489 Generator Protection System, a member of the SR Family of protection relays, provides economical protection, monitoring, and metering functions. It can be used as primary or backup protection on synchronous or induction generators of 25, 50, or 60 Hz. It may be applied in primary, backup and co-generator applications.

The G650 Generator Protection System, a member of the 650 Family of protection relays, provides protection and management capabilities for small to medium sized generators. It combines protection with external communications and a distributed I/O capability.

The W650 Generator Protection System, a member of the 650 Family of protection relays, is a machine controller management device. It may be used to protect and control wind generating machines, and can operate as a packaged generator sets mains failure detector.

The MIGII, a member of the M II Family of protection relays, provides protection for small generators.

www.GEMultilin.com

15

GENERATOR Product Selector Guide

G60

3

489

G650

W650

MIG II

G30

16

* For the most current comparison list, access us online at: www.GEMultilin.com/selector/generator.pdf