GE Appliances

AZ38H09E ??? GE Zoneline?? Deluxe Series Heat Pump Unit

Electrical Wiring

All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.

A

C

B

RAB71 Wall Sleeve

Heavy-gauge galvanized steel, with insulation. A ??? 42 B 13-3/4 C 16"

RAB77 Wall Sleeve

Molded SMC fiberglass-reinforced polyester compound.

A ??? 42-1/8 B 13-7/8 C 16-1/4

Wall Opening Di ensions

Add 1/4" to A and C dimensions for all cut-out size.

Note: Aluminum wiring may pose special problems ??? consult a qualified electrician.

Grille Options

Stamped Aluminum Grille ??? RAG60

Exterior Architectural Louvers Durable Polycarbonate:

Retrofit Kits:

RAK901L ??? Wall Case Insulation for use with heat pumps.

RAK40 ??? Deflector Kit to adapt chassis for use with existing exterior architectura louvered grilles.

Ducted Applications

2800 and 3800 series can be used with ductwork to heat or cool more than n room. RAK6052 Duct Adaptor is applied to top of case over air discharge/ RAK60 Duct Extension is applied to right or left of adaptor. Locally fabricated ductwork may be added to extend to maximum recommended distance of 15 feet.

265 Volt Sub-Base Connected Units

Specification Created 9/04

Electrical Connection

230/208 volt units may be plugged into a receptacle. 265 volt units are provided with a junction box and require direct connection. (NEC Requires 265V Direct Connection) See

Architects and Engineers Design Data Manual for electrical connection information including use of sub-base for direct connected units. Installation must comply with local electrical codes and regulations.

Power Connection kits required on all Zoneline chassis.

For answers to your Monogram ?? GE Profile or GE?? appliance questions, visit our website at

.com or call GE Answer Center?? service,

800.626.2000