Dell_Life_Jacket

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Copyright ?? 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell??? and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.

2013 - 03

Rev. A00

Introduction

Dell OpenManage Server Administrator generates event messages stored primarily in the operating system or Server Administrator event logs and sometimes in Simple Network Management Protocol (SNMP) traps. This document describes the event messages that are created by Server Administrator version 7.1.2 and displayed in the Server Administrator alert log.

Server Administrator creates events in response to sensor status changes and other monitored parameters. The Server Administrator event monitor uses these status change events to add descriptive messages to the operating system event log or the Server Administrator alert log.

Each event message that Server Administrator adds to the alert log consists of a unique identifier called the event ID for a specific event source category and a descriptive message. The event message includes the severity, cause of the event, and other relevant information, such as the event location and the previous state of the monitored item.

The tables in this guide list all Server Administrator event IDs in numeric order. Each entry includes the description, severity level, and cause of the event ID. The message text in angle brackets (for example, (for example, <State>) describes the event-specific information provided by the Server Administrator.

What???s New in this Release

New Alert messages for Instrumentation Service ??? 1015 and 1016.

New Alert messages for Non-Volatile Memory Express (NVMe) ??? 2440, 2441, 2442, 2443 and 2445.

Alert Message Change History

The following table describes the changes made to the Storage Management alerts from the previous release of Storage Management to the current release.

Table 1. Alert Message Change History

Storage Management 4.4

Product Versions to which changes apply

New Alerts

Deleted Alerts

Modified Alerts

Storage Management 4.3

Product Versions to which changes apply

New Alerts

Storage Management 4.4.0

Server Administrator 7.4.0

1015, 1016

1250, 1253, 1255, 1350, 1355, 1450, 1451, 1452, 1453, 1454, 1455, 1500, 1501, 1502, 1503, 1504, 1505, 1600, 1605

None

Storage Management 4.3.0

Server Administrator 7.3.0

2699, 2700, 2701, 2702, 2703, 2704, 2705, 2874, 2875, 2876, 2900, 2901, 2902, 2903, 2904, 2905, 2906, 2907, 2908,

Modified Alerts

Storage Management 3.3

Product Versions to which changes apply

New Alerts

None

Storage Management 3.3.0

Server Administrator 6.3.0

2394, 2395, 2396, 2397, 2398, 2399, 2400, 2401, 2402, 2403, 2404

Messages Not Described in This Guide

This guide describes only event messages logged by Server Administrator and Storage Management that are displayed in the Server Administrator alert log. For information on other messages generated by your system, see one of the following sources:

???The Installation and Troubleshooting Guide or Hardware Owner's Manual shipped with your system

???Operating system documentation

???Application program documentation

Understanding Event Messages

Add your section content here.This section describes the various types of event messages generated by the Server Administrator. When an event occurs on your system, Server Administrator sends information about one of the following event types to the systems management console:

Table 2. Understanding Event Messages

temperature probe in an enclosure) has crossed a warning threshold.

Critical / Failure / A significant event that indicates actual or Errorimminent loss of data or loss of function. For

example, crossing a failure threshold or a hardware failure such as an array disk.

Server Administrator generates events based on status changes in the following sensors:

???Temperature Sensor ??? Helps protect critical components by alerting the systems management console when temperatures become too high inside a chassis; also monitors the temperature in a variety of locations in the chassis and in attached system(s).

???Fan Sensor ??? Monitors fans in various locations in the chassis and in attached system(s).

???Voltage Sensor ??? Monitors voltages across critical components in various chassis locations and in attached system(s).

???Current Sensor ??? Monitors the current (or amperage) output from the power supply (or supplies) in the chassis and in attached system(s).

???Chassis Intrusion Sensor ??? Monitors intrusion into the chassis and attached system(s).

???Redundancy Unit Sensor ??? Monitors redundant units (critical units such as fans, AC power cords, or power supplies) within the chassis; also monitors the chassis and attached system(s). For example, redundancy allows a second or nth fan to keep the chassis components at a safe temperature when another fan has failed. Redundancy is normal when the intended number of critical components are operating. Redundancy is degraded when a component fails, but others are still operating. Redundancy is lost when there is one less critical redundancy device than required.

???Power Supply Sensor ??? Monitors power supplies in the chassis and in attached system(s).

???Memory Prefailure Sensor ??? Monitors memory modules by counting the number of Error Correction Code (ECC) memory corrections.

???Fan Enclosure Sensor ??? Monitors protective fan enclosures by detecting their removal from and insertion into the system, and by measuring how long a fan enclosure is absent from the chassis. This sensor monitors the chassis and in attached system(s).

???AC Power Cord Sensor ??? Monitors the presence of AC power for an AC power cord.

???Hardware Log Sensor ??? Monitors the size of a hardware log.

???Processor Sensor ??? Monitors the processor status in the system.

???Pluggable Device Sensor ??? Monitors the addition, removal, or configuration errors for some pluggable devices, such as memory cards.

???Battery Sensor ??? Monitors the status of one or more batteries in the system.

???SD Card Device Sensor ??? Monitors instrumented Secure Digital (SD) card devices in the system.

Sample Event Message Text

The following example shows the format of the event messages logged by Server Administrator.

EventID: 1000

Source: Server Administrator

Category: Instrumentation Service

Type: Information

Date and Time: Mon Oct 21 10:38:00 2002

Computer: <computer name>

Description: Server Administrator starting

Data: Bytes in Hex

Viewing Alerts and Event Messages

An event log is used to record information about important events.

Server Administrator generates alerts that are added to the operating system event log and to the Server Administrator alert log. To view these alerts in Server Administrator:

1.Select the System object in the tree view.

2.Select the Logs tab.

3.Select the Alert tab.

You can also view the event log using your operating system???s event viewer. Each operating system???s event viewer accesses the applicable operating system event log.

The location of the event log file depends on the operating system you are using.

???On systems running the Microsoft Windows operating systems, event messages are logged in the operating system event log and the Server Administrator event log.

NOTE: The Server Administrator event log file is named dcsys32.xml and is located in the

<install_path>\omsa\log directory. The default install_path is C:\Program Files\Dell\SysMgt.

???On systems running the Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Citrix XenServer, VMware ESX, and VMware ESXi operating systems, the event messages are logged in the operating system log file and the Server Administrator event log.

NOTE: The default name of the operating system log file is /var/log/messages, and you can view the operating system log file using a text editor such as vi or emacs. The Server Administrator event log file is named dcsys<xx>.xml,where xx is either 32 or 64 bit depending on the operating system. In the Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Citrix XenServer and VMware ESX operating systems, the Server Administrator event log file is located in the /opt/ dell/srvadmin/var/log/openmanage directory. In the VMware ESXi operating system, the Server Administrator event log file is located in the /etc/cim/dell/srvadmin/log/openmanage directory.

Logging Messages to a Unicode Text File

Logging messages to a Unicode text file is optional. By default, the feature is disabled in the Server Administrator. To enable this feature, modify the Event Manager section of the dcemdy <xx>.ini configuration file where xx is 32 or 64 bit depending on the operating system, as follows:

???On systems running Microsoft Windows operating systems, you can locate the configuration file in the <install_path> \dataeng\ini directory and set the property UnitextLog.enabled=true. The default install_path is C:\Program Files\Dell\SysMgt. Restart the DSM SA Event Manager service to enable the setting. The Server Administrator Unicode text event log file is named dcsys32.log and is located in the <install_path>\omsa\log directory.

???On systems running the Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Citrix XenServer and VMware ESX operating systems, you can locate the configuration file in the /opt/dell/srvadmin/etc/ srvadmin-deng/ini directory and set the property UnitextLog.enabled=true. Run the /etc/init.d/ dataeng restart command to restart the Server Administrator Event Manager service and enable the setting. This also restarts the Server Administrator Data Manager and SNMP services. The Server Administrator Unicode text event log file is named dcsys <xx>.log where xx is 32 or 64 bit depending on the operating system and is located in the /opt/dell/srvadmin/var/log/ openmanage directory.

???On systems running the in ESXi operating system the dcemdy32.ini file is located under /etc/cim/ dell/srvadmin/srvadmin-deng/ini/ and the dcsys <xx>.log where xx is 32 or 64 bit depending on the operating system and is located under /etc/cim/dell/srvadmin/log/openmanage/

The following sub-sections explain how to launch the Windows Server 2008, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESX, and VMware ESXi event viewers.

Viewing Events in Microsoft Windows Server 2008

1.Click the Start button, point to Settings, and click Control Panel.

2.Double-click Administrative Tools, and then double-click Event Viewer.

3.In the Event Viewer window, click the Tree tab and then click System Log. The System Log window displays a list of recently logged events.

4.To view the details of an event, double-click one of the event items.

NOTE: You can also look up the dcsys <xx>.xml file, in the <install_path> \omsa\log directory, to view the separate event log file, where the default install_path is C:\Program Files\Dell \SysMgt and xx is 32 or 64 depending on the operating system that is installed.

Viewing Events in Red Hat Enterprise Linux and SUSE Linux Enterprise Server

1.Log in as root.

2.Use a text editor such as vi or emacs to view the file named /var/log/messages.

The following example shows the Red Hat Enterprise Linux and SUSE Linux Enterprise Server message log, /var/log/messages. The text in boldface type indicates the message text.

NOTE: These messages are typically displayed as one long line. In the following example, the message is displayed using line breaks to help you see the message text more clearly.

Feb 6 14:20:51 server01 Server Administrator: Instrumentation Service EventID: 1000

Server Administrator starting

Feb 6 14:20:51 server01 Server Administrator: Instrumentation Service EventID: 1001

Server Administrator startup complete

Feb 6 14:21:21 server01 Server Administrator: Instrumentation Service EventID:

1254Chassis intrusion detected Sensor location: Main chassis intrusion Chassis

location: Main System Chassis Previous state was: OK (Normal) Chassis intrusion

state: Open

Feb 6 14:21:51 server01 Server Administrator: Instrumentation Service EventID:

1252Chassis intrusion returned to normal Sensor location: Main chassis intrusion

Chassis location: Main System Chassis Previous state was: Critical (Failed)

Chassis intrusion state: Closed

Viewing Events in VMware ESX/ESXi

1.Log in to the system running VMware ESX/ESXi with VMware vSphere Client.

2.Click View ??? Administration ??? System Logs.

3.Select Server Log ??? /var/log/messages entry from the drop-down list.

Viewing the Event Information

The event log for each operating system contains some or all of the following information:

???Date ??? The date the event occurred.

???Time ??? The local time the event occurred.

???Type ??? A classification of the event severity: Information, Warning, or Error.

???User ??? The name of the user on whose behalf the event occurred.

???Computer ??? The name of the system where the event occurred.

???Source ??? The software that logged the event.

???Category ??? The classification of the event by the event source.

???Event ID ??? The number identifying the particular event type.

???Description ??? A description of the event. The format and contents of the event description vary, depending on the event type.

Understanding the Event Description

Table below lists in alphabetical order each line item that may appear in the event description.

Server Management Messages

The following tables lists in numerical order each event ID and its corresponding description, along with its severity and cause.

NOTE: For corrective actions, see the appropriate documentation.

Server Administrator General Messages

The messages below indicate that certain alert systems are up and working.

Event ID ??? 0000

Event ID ??? 0001

Description Log backup created

SeverityInformation

Event ID ??? 1000

Description Server Administrator starting

SeverityInformation

Event ID ??? 1001

Description Server Administrator startup complete

SeverityInformation

Event ID ??? 1007

Event ID ??? 1008

Description Systems Management Data Manager Started

SeverityInformation

Event ID ??? 1009

Description Systems Management Data Manager Stopped

SeverityInformation

Event ID ??? 1011

Event ID ??? 1012

Description IPMI Status Interface: <the IPMI interface being used>, <additional information if available and applicable >

Severity

Cause

Information

This message is generated to indicate the Intelligent Platform Management Interface (IPMI) status of the system.

Additional information, when available, includes Baseboard Management Controller (BMC) not present, BMC not responding, System Event Log (SEL) not present, and SEL Data Record (SDR) not present.

Event ID ??? 1013

Event ID ??? 1014

Event ID ??? 1015

Description Server Based Management Mode is enabled

SeverityInformation

Event ID ??? 1016

Description Server Based Management Mode is disabled

SeverityInformation

Temperature Sensor Messages

The temperature sensors listed help protect critical components by alerting the systems management console when temperatures become too high inside a chassis. The temperature sensor messages use more variables: sensor location, chassis location, previous state, and temperature sensor value or state.

Event ID ??? 1050

Description Temperature sensor has failed Sensor location: <Location in chassis>

Chassis location: <Name of chassis>

Previous state was: <State>

If sensor type is not discrete:

Redundancy Unit Messages

Redundancy means that a system chassis has more than one of certain critical components. Fans and power supplies, for example, are so important for preventing damage or disruption of a computer system that a chassis may have ???extra??? fans or power supplies installed. Redundancy allows a second or nth fan to keep the chassis components at a safe temperature when the primary fan has failed. Redundancy is normal when the intended number of critical components are operating. Redundancy is degraded when a component fails but others are still operating. Redundancy is lost when the number of components functioning falls below the redundancy threshold. Lists the redundancy unit messages.

The number of devices required for full redundancy is provided as part of the message, when applicable, for the redundancy unit and the platform. For details on redundancy computation, see the respective platform documentation.

Event ID ??? 1300

Memory Device Messages

The memory device messages listed provides status and warning information for memory modules present in a particular system. Memory devices determine health status by monitoring the ECC memory correction rate and the type of memory events that have occurred.

NOTE: A critical status does not always indicate a system failure or loss of data. In some instances, the system has exceeded the ECC correction rate. Although the system continues to function, you should perform system maintenance as described.

NOTE: The <status> can be either critical or non-critical.

Event ID ??? 1400

Event ID ??? 1401

Event ID ??? 1402

Description Memory device status is <status>

Memory device location: <location in chassis>

Possible memory module event cause: <list of causes>

SeverityInformational

Storage Management Message Reference

The Server Administrator Storage Management???s alert or event management features let you monitor the health of storage resources such as controllers, enclosures, physical disks, and virtual disks.

Alert Monitoring and Logging

The Storage Management Service performs alert monitoring and logging. By default, the Storage Management service starts when the managed system starts up. If you stop the Storage Management Service, then alert monitoring and logging stops. Alert monitoring does the following:

???Updates the status of the storage object that generated the alert.

???Propagates the storage object???s status to all the related higher objects in the storage hierarchy. For example, the status of a lower-level object is propagated up to the status displayed on the Health tab for the top-level Storage object.

???Logs an alert in the alert log and the operating system application log.

???Sends an SNMP trap if the operating system???s SNMP service is installed and enabled.

NOTE: Server Administrator Storage Management does not log alerts regarding the data I/O path. These alerts are logged by the respective RAID drivers in the system alert log.

See the Server Administrator Storage Management Online Help for updated information.

Alert Message Format with Substitution Variables

When you view an alert in the Server Administrator alert log, the alert identifies the specific components such as the controller name or the virtual disk name to which the alert applies. In an actual operating environment, a storage system can have many combinations of controllers and disks as well as user- defined names for virtual disks and other components. Each environment is unique in its storage configuration and user-defined names. To receive an accurate alert message, that the Storage Management service must be able to insert the environment-specific names of storage components into an alert message.

This environment-specific information is inserted after the alert message text as shown for alert 2127.

For other alerts, the alert message text is constructed from information passed directly from the controller (or another storage component) to the alert log. In these cases, the variable information is represented with a percent symbol in the Storage Management documentation. An example of such an alert is shown for alert 2334.

Table 3. Alert Message Format

The variables required to complete the message vary depending on the type of storage object and whether the storage object is in a SCSI or SAS configuration. The following table identifies the possible variables used to identify each storage object.

NOTE: Some alert messages relating to an enclosure or an enclosure component, such as a fan or EMM, are generated by the controller when the enclosure or enclosure component ID cannot be determined.

NOTE: A, B, C and X, Y, Z in the following examples are variables representing the storage object name or number.

Table 4. Message Format with Variables for Each Storage Object

Virtual Disk

Enclosure

SCSI Power Supply

Message Format: Virtual Disk X (Name) Controller A (Name)

Message Format: Virtual Disk X Controller A

For example, 2057 Virtual disk degraded: Virtual Disk 11 (Virtual Disk 11) Controller 1 (PERC 5/E Adapter)

NOTE: The virtual disk and controller names are not always displayed.

Message Format: Enclosure X:Y Controller A, Connector B

For example, 2112 Enclosure shutdown: Enclosure 0:2 Controller 1, Connector 0

Message Format: Power Supply X Controller A, Connector B, Target ID C

SCSI Temperature Probe

SAS Temperature Probe

Message Format: Temperature Probe X Controller A, Connector B, Target ID

where C is the SCSI ID number of the EMM managing the temperature probe.

For example, 2101 Temperature dropped below the minimum warning threshold: Temperature Probe 1, Controller 1, Connector 0, Target ID 6

Message Format: Temperature Probe X Controller A, Connector B, Enclosure

For example, 2101 Temperature dropped below the minimum warning threshold: Temperature Probe 1, Controller 1, Connector 0, Enclosure 2

Alert Descriptions and Corrective Actions

The following sections describe alerts generated by the RAID or SCSI controllers supported by Storage Management. The alerts are displayed in the Server Administrator Alert tab or through Windows Event Viewer. These alerts can also be forwarded as SNMP traps to other applications.

SNMP traps are generated for the alerts listed in the following sections. These traps are included in the Server Administrator Storage Management, management information base (MIB). The SNMP traps for these alerts use all of the SNMP trap variables. For more information on SNMP support and the MIB, see the SNMP Reference Guide.

To locate an alert, scroll through the following table to find the alert number displayed on the Server Administrator Alert tab or search this file for the alert message text or number. See Understanding Event Messages for more information on severity levels.

For more information regarding alert descriptions and the appropriate corrective actions, see the online help.

Event ID ??? 2048

displayed on the user interface. Perform a rescan after replacing or restoring the disk. If a disk has not been removed from the disk group, then check for problems with the cables. See the online help for more information on checking the cables. Ensure that the enclosure is powered on. If the problem persists, check the enclosure documentation for further diagnostic information.

Related Alert

Information

SNMP Trap

Numbers

Clear Alert Number: 2052

Related Alert Number: 2054, 2057, 2056, 2076, 2079, 2081, 2083, 2129, 2202, 2204, 2270, 2292, 2299, 2369

Local Response Agent (LRA) Number: 2070

903

Event ID ??? 2050

Event ID ??? 2053

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk created.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2055

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk configuration changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2058

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk check consistency started.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2059

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk format started.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: 2086

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2060

Description

Severity

Cause and

Action

Related Alert

Information

Copy of data started from physical disk % 2 to physical disk % 1.

OK / Normal /Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: 2075

Local Response Agent (LRA) Number: None

Event ID ??? 2061

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk initialization started.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: 2088

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2062

Description

Severity

Cause and

Action

Related Alert

Information

Physical disk initialization started.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: 2089

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2063

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk reconfiguration started.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: 2090

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2075

Description

Severity

Cause and

Action

Related Alert

Information

Copy of data completed from physical disk % 2 to physical disk % 1.

OK / Normal / Informational

Cause: This alert is provided for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: 2060

Local Response Agent (LRA) Number: None

Event ID ??? 2081

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk reconfiguration failed.

Critical / Failure / Error

Hardware RAID:

Cause: A physical disk included in the virtual disk has failed or is not functioning. A user may also have cancelled the reconfiguration.

Action: Replace the failed or non-functional disk. You can identify a disk that has failed by locating the disk that displays a red X in the status field.

If the physical disk is part of a redundant array, then rebuild the physical disk. When finished, restart the reconfiguration.

Software RAID:

???Perform a backup with the Verify option.

???If the file backup fails, try to restore the failed file from a previous backup.

???When the backup with the Verify option is complete without any errors, delete the Virtual Disk.

???Recreate a new Virtual Disk with new drives.

???Restore the data from backup.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2081

Related Alert

Information

SNMP Trap

Numbers

Clear Alert Number: Alert 2085 is a clear alert for alert 2058.

Related Alert Number: None

Local Response Agent (LRA) Number: None

1201

Event ID ??? 2086

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk format completed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: Alert 2086 is a clear alert for alert 2059.

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2087

Description

Severity

Cause and

Action

Related Alert

Information

Copy of data resumed from physical disk % 2 to physical disk % 1.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: 2060

Local Response Agent (LRA) Number: None

Event ID ??? 2088

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk initialization completed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: Alert 2088 is a clear alert for alerts 2061 and 2136.

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2089

Description

Severity

Cause and

Action

Related Alert

Information

Physical disk initialization completed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: Alert 2089 is a clear alert for alert 2062.

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2090

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk reconfiguration completed

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: Alert 2090 is a clear alert for alert 2063.

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2091

Description

Severity

Cause and

Action

Related Alert

Information

Virtual disk rebuild completed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: Alert 2091 is a clear alert for alert 2064.

Related Alert Number: None

Local Response Agent (LRA) Number: None

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

OK / Normal / Informational

Cause: A SCSI device experienced an error, but may have recovered.

Action: None

Clear Alert Number: None

Related Alert Number: 2273

Local Response Agent (LRA) Number: None

751, 851, 901

Event ID ??? 2098

Local Response Agent (LRA) Number: None

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: Alert 2105 is a clear alert for alert 2104.

Related Alert Number: None

Local Response Agent (LRA) Number: None

1151

Event ID ??? 2106

Local Response Agent (LRA) Number: 2071

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Cause: One or more of the enclosure components has failed.

For example, a fan or power supply may have failed. Although the enclosure is currently operational, the failure of additional components could cause the enclosure to fail.

Action: Identify and replace the failed component. To identify the failed component, select the enclosure in the tree view and click the Health subtab. Any failed component is identified with a red X on the enclosure???s Health subtab. Alternatively, you can select the Storage object and click the Health subtab.

The controller status displayed on the Health subtab indicates whether a controller has a Failed or Degraded component.

See the enclosure documentation for information on replacing enclosure components and for other diagnostic information.

Clear Alert Number: 2124

Related Alert Number: 2048

Local Response Agent (LRA) Number: 2090

1305

Event ID ??? 2123

Related Alert

Information

SNMP Trap

Numbers

CAUTION: Removing a physical disk that is included in a non-redundant virtual disk causes the virtual disk to fail and may cause data loss.

If the disk is part of a redundant virtual disk, then any data residing on the corrupt portion of the disk is reallocated elsewhere in the virtual disk.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

903

Event ID ??? 2127

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Cause: The controller driver is not a supported version.

Action: Install a supported version of the driver. If you do not have a supported driver version available, you can check with your support provider for information on how to obtain the most current driver.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2060

753

Event ID ??? 2135

NOTE: This is not supported on Server Administrator version 6.0.1.

Event ID ??? 2145

Description

Severity

Cause and

Action

Related Alert

Information

Controller battery low.

Warning / Non-critical

Cause: The controller battery charge is low.

Action: Recondition the battery. See the online help for more information.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2100

Event ID ??? 2147

Description

Severity

Cause and

Action

Related Alert

Information

Bad block sense error.

Warning / Non-critical

Cause: A portion of a physical disk is damaged.

Action: See the Server Administrator Storage Management online help for more information.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2060

Event ID ??? 2150

Description

Severity

Cause and

Action

Related Alert

Information

Bad block extended medium error.

Warning / Non-critical

Cause: A portion of a physical disk is damaged.

Action: See the Server Administrator Storage Management online help for more information.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2060

Event ID ??? 2172

Description

Severity

Cause and

Action

Related Alert

Information

The controller battery temperature is normal.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: Alert 2172 is a clear alert for alert 2171.

Related Alert Number: None

Local Response Agent (LRA) Number: None

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Warning / Non-critical

Cause: An unsupported configuration was detected.

Action: Replace one of the EMMs with the matching SCSI rate EMM.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2090

853

Event ID ??? 2174

Event ID ??? 2182

Description

Severity

Cause and

Action

Related Alert

Information

An invalid SAS configuration has been detected.

Critical / Failure / Error

Cause: The controller and attached enclosures are not cabled correctly.

Action: See the hardware documentation for information on correct cabling configurations.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2061

102

Event ID ??? 2193

Description

Severity

Cause and

Action

Related Alert

Information

The virtual disk reconfiguration has resumed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2194

Description

Severity

Cause and

Action

Related Alert

Information

The virtual disk Read policy has changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2195

Description

Severity

Cause and

Action

Related Alert

Information

Dedicated hot spare assigned. Physical disk % 1

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: 2196

Related Alert Number: None

Local Response Agent (LRA) Number: None

106

Event ID ??? 2196

Description

Severity

Cause and

Action

Related Alert

Information

Dedicated hot spare unassigned. Physical disk % 1

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2197

Description

Severity

Cause and

Action

Related Alert

Information

Physical disk Replace Member Operation stopped for rebuild.

Warning

Cause: This alert is provided for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: 2060

Local Response Agent (LRA) Number: None

Event ID ??? 2198

Description

Severity

Cause and

Action

Related Alert

Information

The physical disk is too small to be used for Replace member operation.

Warning

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

107

Event ID ??? 2199

Description

Severity

Cause and

Action

Related Alert

Information

The virtual disk cache policy has changed.

Informational

Cause: User has provided invalid input for the chosen operation.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Warning/ Non-critical

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

903

Event ID ??? 2201

108

Event ID ??? 2210

Description

Severity

Cause and

Action

Related Alert

Information

Battery requires reconditioning. Initiate the battery learn cycle.

Warning / Non-critical

Cause: Battery is in warn only mode and requires reconditioning.

Action: Initiate the battery learn cycle.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

111

Event ID ??? 2212

Description

Severity

Cause and

Action

Related Alert

Information

The controller battery temperature is above normal.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2214

Description

Severity

Cause and

Action

Related Alert

Information

Battery charge in progress.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

112

Event ID ??? 2215

Description

Severity

Cause and

Action

Related Alert

Information

Battery charge process interrupted.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2216

Description

Severity

Cause and

Action

Related Alert

Information

The battery learn mode has changed to auto.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2217

Description

Severity

Cause and

Action

Related Alert

Information

The battery learn mode has changed to warn.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

113

Event ID ??? 2218

Event ID ??? 2219

Description

Severity

Cause and

Action

Related Alert

Information

Abort Check Consistency on Error, Replace Member Operation, Auto Replace Member Operation on Predictive Failure and Loadbalance changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2220

Description

Severity

Cause and

Action

Related Alert

Information

Replace Member Operation, Auto Replace Member Operation on Predictive Failure and Loadbalance changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

114

Event ID ??? 2221

Description

Severity

Cause and

Action

Related Alert

Information

Auto Replace Member Operation on Predictive Failure, Abort CC on Error and Loadbalance changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2222

Description

Severity

Cause and

Action

Related Alert

Information

Loadbalance and Auto Replace Member Operation on Predictive Failure changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2223

Description

Severity

Cause and

Action

Related Alert

Information

Abort Check Consistency on Error, Replace Member Operation and Loadbalance changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

115

Event ID ??? 2224

Description

Severity

Cause and

Action

Related Alert

Information

Replace Member Operation and Loadbalance changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2225

Description

Severity

Cause and

Action

Related Alert

Information

Abort Check Consistency on Error and Load balance changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2226

Description

Severity

Cause and

Action

Related Alert

Information

Load balance changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

116

Event ID ??? 2227

Description

Severity

Cause and

Action

Related Alert

Information

Abort Check Consistency on Error, Replace Member Operation and Auto Replace Member Operation on Predictive Failure changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2228

Description

Severity

Cause and

Action

Related Alert

Information

Replace Member Operation and Auto Replace Member Operation on Predictive Failure changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2229

Description

Severity

Cause and

Action

Related Alert

Information

Abort Check Consistency on Error and Auto Replace Member Operation on Predictive Failure changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

117

Event ID ??? 2230

Description

Severity

Cause and

Action

Related Alert

Information

Auto Replace Member Operation on Predictive Failure changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2231

Description

Severity

Cause and

Action

Related Alert

Information

Replace Member Operation and Abort Check Consistency on Error changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2232

Description

Severity

Cause and

Action

Related Alert

Information

The controller alarm is silenced.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

118

Event ID ??? 2233

Description

Severity

Cause and

Action

Related Alert

Information

The Background initialization (BGI) rate has changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2234

Description

Severity

Cause and

Action

Related Alert

Information

The Patrol Read rate has changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2235

Description

Severity

Cause and

Action

Related Alert

Information

The Check Consistency rate has changed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

119

Event ID ??? 2236

Description

Severity

Cause and

Action

Related Alert

Information

Replace Member Operation modified.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2237

Description

Severity

Cause and

Action

Related Alert

Information

Abort Check Consistency on Error modified.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: Change at least one controller property and run the command again.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

120

Event ID ??? 2242

Event ID ??? 2244

Description

Severity

Cause and

Action

Related Alert

Information

A virtual disk blink has been initiated.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

122

Event ID ??? 2248

Description

Severity

Cause and

Action

Related Alert

Information

The controller battery is executing a Learn cycle.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2249

Description

Severity

Cause and

Action

Related Alert

Information

The physical disk Clear operation has started.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2250

Description

Severity

Cause and

Action

Related Alert

Information

Redundant Path is broken.

Warning /Non-critical

Cause: The redundant path is broken.

Action: Check the connection to the enclosure, which is degraded.

Clear Alert Number: 2370

Related Alert Number: 2370

Local Response Agent (LRA) Number: None

124

Event ID ??? 2251

Description

Severity

Cause and

Action

Related Alert

Information

The physical disk blink has initiated.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2252

Description

Severity

Cause and

Action

Related Alert

Information

The physical disk blink has ceased.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2253

Description

Severity

Cause and

Action

Related Alert

Information

Redundant path restored.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

125

Event ID ??? 2254

Description

Severity

Cause and

Action

Related Alert

Information

The Clear operation has cancelled.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2255

Description

Severity

Cause and

Action

Related Alert

Information

The physical disk has been started.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: 2048, 2050, 2065, 2099, 2121, 2196, 2201, 2203

Local Response Agent (LRA) Number: None

126

Event ID ??? 2258

Event ID ??? 2259

Description

Severity

Cause and

Action

Related Alert

Information

An enclosure blink operation has initiated.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: 2260

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2260

Description

Severity

Cause and

Action

Related Alert

Information

An enclosure blink has ceased.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

127

Event ID ??? 2261

Description

Severity

Cause and

Action

Related Alert

Information

A global rescan has initiated.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2262

Description

Severity

Cause and

Action

Related Alert

Information

SMART thermal shutdown is enabled.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2263

Description

Severity

Cause and

Action

Related Alert

Information

SMART thermal shutdown is disabled.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

128

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

901

Event ID ??? 2270

131

Event ID ??? 2272

Event ID ??? 2274

Description

Severity

Cause and

Action

Related Alert

Information

The physical disk rebuild has resumed.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

132

Event ID ??? 2284

Description

Severity

Cause and

Action

Related Alert

Information

A redundant path has been restored.

OK / Normal / Informational

Cause: This alert is provided for informational purposes.

Action: None

Clear Alert Number: Alert 2284 is a clear alert for alert 2283.

Related Alert Number: None

Local Response Agent (LRA) Number: 2071

Event ID ??? 2285

Description

Severity

Cause and

Action

Related Alert

Information

A disk media error was corrected during recovery.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2286

Description

Severity

Cause and

Action

Related Alert

Information

A Learn cycle start is pending while the battery charges.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

136

Event ID ??? 2291

Description

Severity

Cause and

Action

Related Alert

Information

An enclosure management module (EMM) has been discovered.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

138

Event ID ??? 2296

Description

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

An EMM has been inserted.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

951

Event ID ??? 2297

140

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Critical / Failure / Error

Cause: The enclosure or an enclosure component is in a Failed or Degraded state.

Action: Check the health of the enclosure and its components. Replace any hardware that is in a Failed state. See the hardware documentation for more information.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2091

854

Event ID ??? 2302

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

851

142

Event ID ??? 2304

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: 2211

Local Response Agent (LRA) Number: None

751

Event ID ??? 2305

Action: Back up your data. Replace the disk generating this alert and restore from back up.

143

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Warning / Non-critical

Cause: The battery or the battery charger is not functioning properly.

Action: Replace the battery pack.

Clear Alert Number: None

Related Alert Number: 2188

Local Response Agent (LRA) Number: 2100

1153

Event ID ??? 2319

147

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

751

Event ID ??? 2340

155

Event ID ??? 2342

Event ID ??? 2344

Description

Severity

Cause and

Action

Related Alert

Information

The virtual disk initialization terminated.

Warning / Non-critical

Cause: A user has cancelled the virtual disk initialization.

Action: Restart the initialization.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2080

156

Cause and

Action

Hardware RAID: Cause and Action

Cause: You are attempting to rebuild data that resides on a defective disk.

Action: Replace the source disk and restore from backup.

Software RAID:

???Perform a backup with the Verify option.

???If the file backup fails, try to restore the failed file from a previous backup.

???When the backup with the Verify option is complete without any errors, delete the Virtual Disk.

???Recreate a new Virtual Disk with new drives.

???Restore the data from backup.

158

Event ID ??? 2351

Description

Severity

Cause and

Action

Related Alert

Information

A physical disk is marked as missing.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None.

Clear Alert Number: 2352

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2352

Description

Severity

Cause and

Action

Related Alert

Information

A physical disk that was marked as missing has been replaced.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Status: Alert 2352 is a clear alert for alert 2351.

Related Alert Number: None

Local Response Agent (LRA) Number: None

159

Event ID ??? 2358

Description

Severity

Cause and

Action

Related Alert

Information

The battery charge cycle is complete.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2360

Description

Severity

Cause and

Action

Related Alert

Information

A user has discarded data from the controller cache.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

162

Event ID ??? 2361

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Warning

Cause: This alert is for informational purposes.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

753

Event ID ??? 2362

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

751

Event ID ??? 2364

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Warning

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

753

163

Event ID ??? 2366

Severity

Cause and

Action

Warning / Non-critical

Cause: The physical disk is using an incompatible technology.

Action: All physical disks in the virtual disk must use the same technology. You cannot use both SAS and SATA physical disks in the same virtual disk. Remove the physical disk and insert a new physical disk that uses the correct technology. If the rebuild does not start automatically after you have inserted a suitable physical disk, then run the Rebuild task.

Event ID ??? 2368

Description

Severity

Cause and

Action

Related Alert

Information

The SCSI Enclosure Processor (SEP) has been rebooted as part of the firmware download operation and is unavailable until the operation completes.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: 2049, 2052, 2162, 2292

Local Response Agent (LRA) Number: None

164

Event ID ??? 2369

Description

Severity

Cause and

Action

Related Alert

Information

Virtual Disk Redundancy has been degraded.

OK / Normal / Informational

Cause: A physical disk in a RAID 6 virtual disk has either failed or been removed.

Action: Replace the missing or failed physical disk.

Clear Alert Number: 2121

Related Alert Number: 2048, 2049, 2050, 2076, 2346

Local Response Agent (LRA) Number: None

Event ID ??? 2370

Description

Severity

Cause and

Action

Related Alert

Information

Redundant Path View cleared.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2371

Description

Severity

Cause and

Action

Related Alert

Information

Attempted import of Unsupported Virtual Disk type RAID%1.

OK / Normal / Informational

Cause: This alert is for informational purposes.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

165

Event ID ??? 2378

Event ID ??? 2379

Description

Severity

Cause and

Action

Related Alert

Information

An overflow of the foreign configuration has occurred. You can import the foreign configuration in multiple attempts.

Warning

Cause: This alert is provided for informational purposes.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2380

Description

Severity

Cause and

Action

Related Alert

Information

Foreign configuration has been partially imported. Some configuration failed to import.

OK / Normal / Informational

Cause: This alert is provided for informational purposes.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

168

Event ID ??? 2388

Description

Severity

Cause and

Action

Related Alert

Information

The Controller Encryption Key is destroyed.

OK / Normal / Informational

Cause: The Controller Encryption Key is destroyed.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

171

Event ID ??? 2389

Description

Severity

Cause and

Action

Related Alert

Information

The virtual disk bad block medium error is cleared.

OK / Normal / Informational

Cause: Virtual disk bad blocks are cleared.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2392

Description

Severity

Cause and

Action

Related Alert

Information

The drive Encryption Key is invalid.

Warning / Non-critical

Cause: The controller failed to verify the specified Passphrase.

Action: Enter a correct Passphrase.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: 2060

172

Event ID ??? 2393

Event ID ??? 2394

Description

Severity

Cause and

Action

Related Alert

Information

Persistent Hot Spare is enabled.

OK / Normal / Informational

Cause: The Persistent Hot Spare option is enabled.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2395

Description

Severity

Cause and

Action

Related Alert

Information

Persistent Hot Spare is disabled.

OK / Normal / Informational

Cause: The Persistent Hot Spare option is disabled.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

173

Event ID ??? 2396

Event ID ??? 2398

Description

Severity

Cause and

Action

Related Alert

Information

The Manage Physical Disk Power property(s) changed.

OK / Normal / Informational

Cause: The Manage Physical Disk Power properties are changed.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

174

Event ID ??? 2400

Description

Severity

Cause and

Action

Related Alert

Information

Physical disk configuration data updated as it was stale.

Informational

Cause: The physical disk configuration data is updated because it was outdated.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2401

Description

Severity

Cause and

Action

Related Alert

Information

Configuration command could not be committed to disk. Configuration has to be re applied.

Failure / Error

Cause: The virtual disk configuration command did not succeed.

Action: Check for the recent configuration that has not taken effect. Re-apply the configuration.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

175

Event ID ??? 2402

Description

Severity

Cause and

Action

Related Alert

Information

Changing the Physical Disk Power status from 1% to 2% failed.

Failure / Error

Cause: When changing the Physical Disk Power status fails.

Action: Replace the physical disk.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2404

Description

Severity

Cause and

Action

Related Alert

Information

Virtual Disk is not available.

OK / Normal / Informational

Cause: The operating system does not detect the newly created virtual disk.

Action: Wait for some time.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

176

Event ID ??? 2407

Description

Severity

Cause and

Action

Related Alert

Information

Controller Encryption mode is enabled in LKM.

Informational

Cause: The Local Key Management (LKM) encryption mode is enabled.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2411

Description

Severity

Cause and

Action

Related Alert

Information

Controller LKM Encryption key is changed.

Informational

Cause: Using Manage Encryption Key operations, encryption key is changed.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

177

Event ID ??? 2412

Description

Severity

Cause and

Action

Related Alert

Information

Controller CacheCade is resized.

Informational

Cause: This alert is provided for informational purposes.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2413

Description

Severity

Cause and

Action

Related Alert

Information

Controller CacheCade is created.

Informational

Cause: This alert is provided for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2414

Description

Severity

Cause and

Action

Related Alert

Information

Controller CacheCade is deleted.

Informational

Cause: This alert is provided for informational purposes.

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

178

Related Alert

Information

SNMP Trap

Numbers

NOTE: If the unrecoverable medium error has not been corrected, it may be reported again by the system. This error can be fixed by writing data on the affected area or deleting and recreating the Virtual Disk as demonstrated in the following procedure.

1.Back up the data.

2.Delete the Virtual Disk.

3.Recreate the Virtual Disk using the same parameters like size, RAID level, disks, etc.

4.Restore data.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

1204

Event ID ??? 2418

180

Event ID ??? 2426

Description

Severity

Cause and

Action

Related Alert

Information

State change on Physical disk from Non- RAID to READY.

Informational

Cause: User triggered action.

Action: Configure the drive to be ready using CLI/GUI.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2429

Description

Severity

Cause and

Action

Related Alert

Information

Drive Prepared for Removal.

Informational

Cause: User triggered action.

Action: Execute "Prepare to Remove" task from UI in a PCIeSSD setup

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2430

Description

Severity

Cause and

Action

Related Alert

Information

Physical Device Log Exported.

Warning

Cause: User triggered action.

Action: Execute export log for physical device.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

181

Event ID ??? 2434

Description

Severity

Cause and

Action

Related Alert

Information

Physical Device has reached or exceeded its warranted device wear-out limit.

Warning

Cause: User triggered task.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2435

Description

Severity

Cause and

Action

Related Alert

Information

Physical Device is approaching read-only mode.

Informational

Cause: User triggered task.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2436

Description

Severity

Cause and

Action

Related Alert

Information

Physical Device is in read-only mode.

Critical

Cause: User triggered task.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

183

Event ID ??? 2437

Description

Severity

Cause and

Action

Related Alert

Information

The physical device blink has initiated.

Informational

Cause: User triggered task.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2438

Description

Severity

Cause and

Action

Related Alert

Information

The physical device blink has ceased.

Informational

Cause: User triggered task.

Action: None.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2440

Description

Severity

Cause and

Action

Related Alert

Information

The physical device volatile memory backup device failed.

Error

Cause: None

Action: None

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

184

Event ID ??? 2441

Severity

Cause and

Action

Related Alert

Information

SNMP Trap

Numbers

Error

Cause: None

Action: Contact your service provider.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

904

Event ID ??? 2442

Severity

Cause and

Action

Error

Cause: None

Action: Back up the data on the device, and contact your service provider for further instructions.

Event ID ??? 2443

Description

Severity

Cause and

Action

Related Alert

Information

The volatile memory backup device on the PCIe solid state device identified in the message is no longer functional. Data loss is possible.

Error

Cause: None

Action: Back up the data on the device, and contact your service provider for further instructions.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

185

Event ID ??? 2444

Description

Severity

Cause and

Action

Related Alert

Information

The Patrol Read operation was manually stopped before completion.

Informational

Cause: User Triggered Task

Action: If desired, restart the Patrol Read operation at a later time.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

Event ID ??? 2445

Description

Severity

Cause and

Action

Related Alert

Information

Cryptographic Erase operation is successfully completed on the physical disk drive identified in the message.

Informational

Cause: User Triggered Task

Action: No response action is required.

Clear Alert Number: None

Related Alert Number: None

Local Response Agent (LRA) Number: None

186

System Event Log Messages for IPMI Systems

The tables in this chapter list the system event log (SEL) messages, their severity, and cause.

NOTE: For corrective actions, see the appropriate documentation.

Temperature Sensor Events

The temperature sensor event messages help protect critical components by alerting the systems management console when the temperature rises inside the chassis. These event messages use additional variables, such as sensor location, chassis location, previous state, and temperature sensor value or state.

Table 5. Temperature Sensor Events

201