INSTALLING THE SWITCH
TROUBLESHOOTING
If you have a problem with your Wall Switch, first follow this guide. If the problem persists, call the customer
6109
WARNING: Turn power off at the circuit breaker before wiring.
The length of time that the lights stay on is adjustable from 12 seconds to 30 minutes.
The sensor can be prevented from turning on lights when there is already enough light in the room. Use a small
service hotline at
Motion Sensing
Wall Switch
??? Use a small screw driver to set the time by using the diagram below as a guide.
screw driver to set the light level using this diagram as a guide. In the fully clockwise position, the sensor turns on lights even in full daylight. In the fully
The 6109 Motion Sensing Wall Switch dectects motion to turn on lights for an adjustable amount of time. A
Installation is as easy as replacing a wall switch. However, some codes require installation by a qualified electrician.
Features include:
Pinch
here
Note:
To adjust the photocell:
Adjustment screws found under
SPECIFICATIONS
Included are: ??? The sensor switch ??? Cover plate ??? 3 wire connectors ??? 2 large screws ??? 2 small screws.
INSTALLATION
WARNING: For indoor use only.
SELECT A LOCATION
NEW APPLICATION
Choose a location where the motion sensor has a clear view of the entire area where occupant motion may occur.
RETROFIT APPLICATION
Motion sensing switch will replace existing wall switch. Use only where the existing switch location provides a clear view of the occupied area.
Typical Plan View of Coverage
TYPICAL INSTALLATION
???Mount the detector into the wall box with the mounting screws.
???For test purposes, use a small screwdriver to turn the time control fully
and the light control fully clockwise. Turn the power back on at the circuit breaker.
Complete Installation
???Replace control panel cover and install the decorative wall plate. In installations where the Cooper motion sensor switch is combined with other switches or outlets on an expanded box, a combination wall plate will need to be purchased. Various combination wall plates are available at Home Centers and Electrical Supply Stores.
???Press the push button a couple of times to make sure it operates freely.
USE
MODE Selection Switch
Pressing the pushbutton selects one of three modes of operation: ON, OFF, AUTO
ON: Lights stay on continuously. The ON led is lit.
YOUR COOPER WIRING DEVICES ASSEMBLED PRODUCT TWO YEAR LIMITED WARRANTY
For a period of 2 years from the date of purchase, Cooper Wiring Devices will replace or repair the motion sensing switch provided that it has not been subject to abuse, improper installation or improper use, and is returned prepaid to Cooper Wiring Devices Quality Control Department at 203 Cooper Circle, Peachtree City, GA 30269. If the product has been discontinued, replacement will be made with the nearest available equiva- lent model. This warranty does not cover consumables (such as fuses). Proof of purchase in the form of a bill of sale or receipted invoice that shows that the item is within the applicable warranty period must be pre- sented to obtain the repair or replacement provided by the warranty. Repair or replacement as provided under this warranty is the exclusive remedy of the customer. Cooper Wiring Devices shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on any of its prod-
GENERAL APPLICATION INFORMATION
The detector is more sensitive to motion across the front of the sensor than to motion towards the sensor.
The detector senses heat in motion and possible heat sources that change temperature quickly. Therefore, to avoid false triggering, avoid placing the sensor where it will be aimed at air conditioners, heaters, and other sources of heat or cold.
Questions? Call
- 2 -
OFF: Lights stay off. The AUTO led and the ON led are not lit.
AUTO: Lights come on for time set when motion is detected and the light level is below the set level.
The AUTO led is on and the ON led is off.
*When in the OFF mode, the circuit is still alive. Turn off circuit breaker before
- 3 -
ucts. Except to the extent limited or prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
