Compaq 2 Port PS/2 KVM Switch

CPQ10KVM

FCC STATEMENT

CPQ10KVM

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and the receiver.

???Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

???Consult a service representative for help.

Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Micro Innovations is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user???s authority to operate the equipment.

Responsible party: Micro Innovations 400 Clearview Ave. Edison, NJ 08837

Telephone: 1(877) 550-5534

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil num??rique de classe B est conforme ?? la norme NMB- 003 du Canada.

2

Table of Contents

3

Welcome

Congratulations on your purchase of your new Compaq 2 Port PS/2 KVM Switch. The Compaq 2 Port PS/2 KVM Switch allows you to control two PCs from one keyboard, mouse and video monitor.

Package Contents

???2 Port PS/2 Mini KVM Switch

???2 Built-in 6ft KVM cables with mouse, keyboard and VGA port

???User???s Manual

???Warranty Information

Features and Benefits

???Use one keyboard, monitor and mouse to control two computers

???Easy to Install ??? No software required ??? connecting the KVM switch cables to the computers is all it takes

???Easy to operate ??? PC select via keyboard

???LED display to show which PC is active

???No need for external power supply

???Video Quality up to 2048x1536

???Caps Lock, Num Lock and Scroll Lock states are saved and restored when switching

???Auto Scan Mode for monitoring PCs

4

Using the KVM Switch

Switching PCs:

On the KVM Switch, you will see two LED lights. The LED that is lit is the selected PC to be displayed on the monitor. In order to switch from one PC to the other, simply hit the SCROLL LOCK key twice on your keyboard, then hit either the UP ARROW or DOWN

ARROW.

[Scroll Lock] + [Scroll Lock] + [???]

or

[Scroll Lock] + [Scroll Lock] + [???]

Auto Scan Mode:

With the KVM Switch in Auto Scan mode, you can monitor the activity of the connected computers without taking the trouble of switching PCs yourself. To initiate Auto Scan mode, simply hit the SCROLL LOCK key twice, then hit the S key. This will make the KVM Switch alternate between the two PCs every 8 seconds. To exit Auto Scan mode, press any key.

[Scroll Lock] + [Scroll Lock] + [S]

6