Table of Contents

www.CasablancaFanCo.com 1.888.227.2178

Congratulations on purchasing your new Casablanca?? ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan, please visit: www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

What to Expect with Your Installation

30 inches

Hanging the Fan

Switch Housing

10 PA GE

? ?

1

What to Expect with Your Installation

www.CasablancaFanCo.com 1.888.227.2178

Must be able to secure the fan to building structure or fan-rated outlet box

You may need a

friend to help you.

If you are unfamiliar with wiring, use a qualified electrician.

Know your wiring

Assess location

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of fire, electrical shock, or motor damage, use only Casablanca Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Check box to see fan weight

2

c.2 - Use only Casablanca replacement parts.

Tools Needed

www.CasablancaFanCo.com 1.888.227.2178

Ceiling Bracket

www.CasablancaFanCo.com 1.888.227.2178

Bumper

OFF

Make sure all four bumpers are still attached.

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location.

Refer to warning w.1 on pg. 2

www.CasablancaFanCo.com 1.888.227.2178

Hanging the Fan

While holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling bracket. Be sure the ground wire attached to the hanger faces out of the large opening in the ceiling bracket.

Once the motor is in the ceiling bracket, use the two locking screws

found in the hardware bag to secure the motor to the ceiling bracket.

6

www.CasablancaFanCo.com 1.888.227.2178

Note: Fan style may vary.

Wiring

Motor Housing

www.CasablancaFanCo.com 1.888.227.2178

Raise the motor housing up over the motor and ceiling bracket. Turn the motor housing so the screw holes align and the indentation in the housing locks into place with the notch in the ceiling bracket. The motor housing is not secured until the next step is complete.

Do not leave unattended.

Motor

Housing

Screw

With a Phillips head screwdriver, install the four motor housing screws found in the hardware bag. Tighten all four screws securely.

Insert grommets found in thehardware bag into the holes in the blades, then secure each blade to a blade iron with screws found in thehardware bag.

Lightly attach the blade irons to the motor with screws found in

the hardware bag, then securely tighten after both screws are attached.

9

Switch Housing

www.CasablancaFanCo.com 1.888.227.2178

10

Insert the third screw, found in the hardware bag, into place and

then tighten all three screws.

Make sure the upper switch housing is securely attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling.

Connect the plugs from the upper and lower switch housings. Make sure to line up the colored markings on

the connectors.

Want to install your fan without a light kit?

Go to www.CasablancaFanCo.com/FAQs and click ???How do I install my fan without the light kit????

Lift the lower switch housing up until the holes line up with the screw holes in the upper switch housing.

11

M6016-01 ??? 06/25/15 ??? ?? 2013???2015 Casablanca Fan Company

Insert three switch housing screws found in the hardware bag.

Make sure the lower switch housing is securely attached to the upper switch housing. Failure to properly secure all three assembly screws could result in the light fixture falling.

Light Kit (continued)

www.CasablancaFanCo.com 1.888.227.2178

To install the shade, first loosen the thumb screws. Raise the shade to the light fixture. Tighten all thumbscrews securely.

Install a bulb into each of the sockets. When necessary, replace with bulbs of the same wattage.

Connect the appropriate pull chain pendant to each of the short chains coming from the switch housing.

See next page for fan operation instructions.

Maintenance, Operation & Cleaning

ON

Reverse

Switch

The fan pull chain controls the speed: from high to off.

The light pull chain controls the light fixture: on and off.

For questions regarding removing a light kit, call customer service 1-888-227-2178.

To switch the direction of air flow, move the reverse switch to the opposite position.

13

For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

Fan doesn???t work

???Make sure power switch is on.

???Pull the pull chain to make sure it is on.

???Push the motor reversing switch firmly left or right to ensure that it is engaged.

???Check the circuit breaker to ensure the power is turned on.

???Make sure the blades spin freely.

???Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on page 7.

???Check the plug connection in the switch housing.

Excessive wobbling

???Tighten all of the blade and blade iron screws until they are snug.

???Use the provided balancing kit and instructions to balance the fan.

Noisy Operation

???Tighten the blade and blade iron screws until they are snug.

???Check to see if any of the blades are cracked. If so, replace all of the blades.