Dear Customers

May we take this opportunity to thank you for purchasing this DVD/VIDEO CD/CD player. We strongly recommend that you carefully study the operating instructions before attemting to operate the unit and that you note the listed precautions.

Safety information

Note:

This unit can be used only where the power supply is AC 110V/60Hz ~ AC 240V/50Hz .It cannot be used elsewhere.

CAUTION:

1.DVD PLAYER IS A CLASS 1LASER

PRODUCT:

HOWEVER THIS PLAYER USES A VISIBLE

LASER BEAM WHICH COULD CAUSE

HAZARDOUS RADIATION EXPOSURE IF

DIRCETED. BE SURE TO OPERATE THE

PLAYER CORRECTLY AS INSTRUCTED.

2.WHEN THIS PLAYER IS PLUGGED TO THE

WALL OUTLET, DO NOT PACE YOUR EYES

CLOSE TO THE OPENINGS TO LOOK INTO

THE INSIDE OF THIS PLYER.

3.USE OF CONTROLS OR ADJUSTMENTS

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT ON HAZARDOUS RADIATION

RXPOSURE.

DO NOT OPEN COVER OR ATTEMPT TO REPAIR

THIS PRODUCT BY YOURSELF. ALWAYS REFER

SERVICING TO QUALIFIED PERSONNEL.

WARNING:

1.TO REDUCE THE RISK OF FIRED OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

2.TO REDUCE THE RISK OF FIRE ELECTRIC

SHOCK OR PICTURE & SOUND

INTERFERENCE, USE THE

RECOMMENDED ACCESSORIES ONLY.

Manfactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby laboratories,Confidential Unpublished Works,

c 1992-1997 Dolby laboratories Inc. All rights reserved.

Precaution

Please read these precautions before operating this unit.

Power cord protection

To avoid a malfunction of this product and to protect against electric shock .fire or personal injury, please observe the following.

1.Hold the plug firmly when connecting or disconnecting the AC power supply to this unit.

2.Do not connect or disconnect the AC power supply when your hands are wet.

3.Keep the AC power cord away from heating appliances.

4.Never put heavy Objects on the power cord

5.Do not attempt to repair or reconstruct the power cord in any way.

Placement

Avoid placing the unit in areas of:

1.Direct sunlight.

2.High temperature (over 35c ) or high humidity (over 90%)

3.High levels of dust

The internal parts may be damaged as a result.

Non-use Periods

When not in use, switch off the unit.

When left unused for a long period of time, the unit should be unplugged from the household AC supply.

Foreign Objects

1.Touching internal parts of this unit is dangerous and may damage the player. Never attempt to disassemble the unit.

2.Do not put any foreign objects on the disc tray.

Keep away from water / magnetic fields

1.Keep the unit away from flower vases, tubs, sinks, etc. if liquids are spilled into the unit , serious damage will occur.

2.Do not magnetic objects (such as speakers) close to this unit

Stacking

1.Place the unit in a horizontal position. Do not place anything heavy on top of it.

2.DO not place the unit on amplifiers or other appliances which may generate heat.

Condensation

Moisture may form on the lens in the following conditions:-

1.Immediately after a heater has been turned on.

2.In a steamy or very humid room.

3.When the unit is moved from a cold environment to a warm one .if moisture forms inside this unit, it may not operate properly. In this case, turn o the power and wait about one hour for the moisture to evaporate.

If there is noise interference on your TV channels

Depending on the reception conditions of the broadcast, interference may appear on the TV while you are watching a channel with the DVD player on. This is not a malfunction of the unit or the TV. Should this occur, simply switch off the DVD player.

IMPORTANT:

AS SOON AS THE EQUIPMENT HAS BEEN

CONNECTED, PLEASE REFER TO THE INITIAL

SETTINGS CHAPTER AT PAGE 17.

Features

DVD: a completely new dimension in video entertainment

1.Subtitles may be displayed in one of a maximum of 32 languages.

2.The audio soundtrack can be heard in up to 8 languages.

3.The multi-angle function allows you to choose the viewing angle of which scenes were shot from many different angles (limited to DVD discs recorded with multiple camera angles). The number of the languages recorded is dependent on the software.

High quality digital audio

1.The Dolby Digital / MPEG2 audio/Linear PCM decoder is built into the player which makes it possible to enjoy Multi-channel surround sound.

2.With linear PCM sound of a 48 kHz/16 bit through 96 kHz/24 bit, audio quality exceeding that of Audio CD becomes

possible.

3. The unit has a built-in MP3 audio file decoder

May convenient features

1.Direct access of favorite scenes (title/chapter/time/track search).

2.Programming of up to 3 scenes in memory (marker) [DVD only]

3.Parental lock setting to prevent play of discs unsuitable for some audiences. [DVD only]

Compatible with PLA DVD/VCD and NTSC DVD/VCD

1. This player can play discs recorded in either PAL or NTSC format however, the player must be connected to a Multi-system TV to play both PLA DVD/VCD and NTSC DVD/VCD.

The use of Multi-system TV is recommended.

Compatible with video CDs (VCD) and audio CDs as well as DVD.

Disc formats supported by this player

MP3 CD recorded in MP3 file

Selecting the type of disc compatible with your TV

Both DVD discs and Video CDs (VCDs) have material recorded in either PAL or NTSC format. Refer to the table below to select the disc type compatible with your TV.

DIGITAL AUDIO

DVD

(8cm disc/12cm disc)

VCD

(8cm disc/12cm disc)

CD

(8cm disc/12cm disc)

1.POWER ON/OFF

2.DISC TRAY

3.OPEN/CLOSE

4.FAST REWIND

5.CHANNEL SELECT

6.PREVIOUS TRACK

7.FAST FORWARD

8.MIC INPUT1

Remote control????????????unit???

1.POWER button

2.NUMERIC buttons

3.Repeat 1/ALL

4.Repeat A-B

5.MENU button

6.PBC buttons

7.SUBTITLE buttons

8.AUDIO button

9.SKIP button( )

10.PAUSE button

11.CURSOR buttons

12.SLOW button

13.STEP button

14.INFO buttons

15.GAME button

16.SETUP button

17.EJECT button

18.PROGRAM button

19.CLEAR button

20.GOTO button

21.MUTE button

22.TITLE button

23.VOLUME button

24.ANGLE button

25.FAST FORWARD/FAST BACKWARD button

26.STOP button

27.PLAY/SEL button

28.RETURN button

29.ZOOM button

30.TV.SYS button

9.MIC INPUT 2

10.MIC VOL

11.MIC ECHO

12.VFD DISPLAY

13.PLAY

14.PAUSE

15.STOP

16.NEXT TRACK

1

2

3

4

5

6

7

8

9

10

11

12

13

14

POWER GAME SETUP EJECT

PROGRAM

1 2 3

CLEAR

4 5 6

7 8 9 0

REPEAT GOTO MUTE A-B 1/ALL

PBC MENU TITLE

+

SUBTITLE AUDIO ANGLE VOLUME

-

PREV NEXT F.BWD F.FWD

PLAY/SEL

< >

STEP INFO TV.SYS ZOOM

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

Connection to TV and Audio players

IMPORTANT! Ensure that ALL equipment to be connected is SWITCHED OFF before proceeding

We also recommend that you consult with the connecting instructions of any equipment to be connected before you proceed.

Connecting to Stereo TV (configuration [A] )

1.TV set

2.DVD player

3.L/R (Front ) Audio Output

4.S-video Output (Video option 1 )

5.To Audio In on Stereo Amp

6.To S-video input connector on TV (Video option 1 )

7.Video In on TV (Video option 2)

8.Video Out on DVD (Video option 2)

S-video output connector

The S(separate) video output connector separates the color (C) and luminance (Y) signals before transmitting them to the TV set in order to achieve a sharper picture.

Use the S-video cord when connecting the player to a TV set equipped whit an S-video input connector for optimum picture clarity.

Audio connections

Connecting to a TV amplifier with 5.1ch input connector supporting Dolby Digital decoder

This player contains Dolby Digital decoder.This enables the playback of DVDs recorded in Dolby Digital surround without the need for an external decoder with Dolby Digital processing.

When the player is connected to an AV amplifier with 5.1ch input connectors you can enjoy cinema quality audio in your home when playing discs recorded Digital Surround Sound.

1.TV set

2.DVD/VCD/CD player

3.Video connector

4.Amplifier with 5.1ch input connector

5.Audio cords (optional)

The surround speakers should be installed at an equal distance to (or further away from) the front speakers relative to the listening position.

Remote control preparation?????????

A

Insert the batteries while observing the correct (+) and (-) polarities as illustrated.

Service life of batteries

The batteries normally last for about one year although this depends on how often and for what operations the remote control is used.

If the remote control unit fails to work even when it is operated near the player, replace the batteries.

Use 2*'AAA' type batteries.

Notes:

Do not use rechargeable (Ni-cd) batteries.

Do not attempt to recharge, shot-circuit or disassemble batteries. Never place batteries close to a heat source such as radiators or heaters.

Dispose of batteries in a responsible manner. Never throw batteries on a fire.

Do not drop or step on the remote control unit. This may damage the parts or lead to malfunction.

Do not mix old and new batteries.

If the remote control unit is not going to be used for long time, always remove the batteries to prevent leakage.

Remote control operation range ( B

Point the remote control unit no more than about 7 m from the remote control sensor and within 60 from the front of the unit.

The operating distance may vary according to the brightness of the room.

Notes:

Do not point bright lights at the remote control sensor.

Do not place objects between the remote control unit and the remote control sensor.

Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.

Before enjoying DVD/Video CD/CD

The On-Screen menu language of your player has been factory pre-set to English. There is another available OSD language selected.

Playing Audio CD's

Press the Power button then the OPEN/CLOSE button to open the CD drawer. Place the audio CD on the tray with the label facing up. Press the OPEN/CLOSE button once again to close the CD drawer.

The player will read the disc contents and automatically play.

To view the CD information such as track number and track time on the TV (OSD),press the STOP button twice on the remote control. Press the ENTER button again to play.

You should use PREV/NEXT to choose next or previous song, also you could use number key to select song directly.

Basic operation

.Preparations

. Switch the on the TV and select "Video" as the input source. Switch on the stereo system if the player has been connected to

a stereo audio amplifier.

Basic play

1.Press POWER by the main unit to switch on the power.

2. Press OPEN/CLOSE by the main unit or EJECT on the remote control unit

to open the disc tray.

Open

3.Place a disc onto the disc tray.

Hold the disc without touching either of its surfaces, position it with the printed side facing up, align it with the guides and place it on the

disc tray.

(1)8cm disc

(2)12cm disc

4.Press the OPEN/CLOSE button again or PLAY on the main unit or remote control will close the disc tray and display:

The player will automatically play.

When a menu screen appears on the TV monitor:-

In case of interactive DVDs or VCDs with playback control, a menu screen appears on the TV. With DVDs, you can use CURSOR to select which item you want to enjoy and press ENTER. With VCDs, you will need to press the NUMERIC key, then press ENTER.

Press POWER button on the front panel or remote control to switch the unit from ON to STANDBY mode (or vice versa). In standby mode, the unit is still consuming a small amount of power.

Note:

The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. When no further selections are to be played, be sure to press the STOP button to clear the menu display.

If the disc is placed in the tray upside down (and it is a single sided disc), the DVD display will indic ate "NO DISC".

For your reference:

When appears while a button is being operated, it means that the corresponding operation is prohibited by the player or the disc.

Stopping play

Press STOP

For you convenience;

Memory Stop DVDs and VCDs (without PBC), can utilize a function called Memory Stop. This allows you to temporarily stop a movie and restart it from the same point later. While playing a disc, pressing STOP once will set the player into Memory Stop mode. At this point, pressing PLAY re-starts the movie from the same point. Pressing STOP a second time will stop the disc completely (i.e. the Stop Memory is lost). Note that some DVD discs will not allow the use of Memory Stop.

PREV/NEXT

NEXT

press NEXT during play.

A chapter (DVD) or a track (VCD / CD) is skipped each time the button is pressed.

PREV

Press PREV during play.

When the button is pressed once midway through a chapter/track, play returns to the start of that chapter/track. When it is pressed again, a chapter/track is skipped each time the button is pressed.

.For your reference:

When PREV/NEXT is pressed during menu play of VCD, a menu screen may sometimes be recalled

Fast FWD/BWD

Using either the Remote Control or the Front Panel controls, press FAST FWD( )or FAST BWD( )during play.

For you reference:

Press FAST FWD or FAST RWD button once, the disc will be played forward or backward at double (x 2) speed. With each subsequent press, the disc will be played back at x4, x8, x16 or x32 speed and PLAY. Press PLAY button to return to normal play.

Pause picture

Press PAUSE during play

.For your reference:

When playing, pressing the PAUSE button pause playback. Press the PAUSE button again to enter step status. The picture will go ahead frame by frame. To return to normal play, press the PLAY button.

Step picture

Press STEP during play

For your reference:

When playing,pressing the STEP button step playback. Press PLAY button to return to normal play.

SLOW PLAY

Press SLOW button when playing, you can play the disc at 1/2. 1/4, 1/8, 1/16,1/32 of normal speed. If you want stop it, you can press PLAY button to play normally again.

MENU and TITLE

Press. MENU or TITLE by the remote control unit

DVD discs usually are divided into several titles and subdivided into chapters. VCD / CD discs are divided into tracks.

.Press TITLE on the remote and the disc playing will automatically return to the title program. Press the CURSOR buttons on the remote to select the option, then press ENTER button to play it. Note it is possible that some DVD discs will not have this function

.Press MENU button on the remote, the disc playing will automatically return to the chapter menu. Press CURSOR buttons on the controller to select chapter and then press the ENTER button to play,

.For and VCD with PBC, pressing MENU will turn the PBC function off. Pressing MENU again turns the PBC back on.

.Changing SUBTITLE language [DVDs only]

it is possible to change the subtitle language from the one selected, if available This operation works only with discs on which multiple subtitle

.languages have been recorded).

Press the SUBTITLE button on the remote. The alternative language subtitle will appear wffh each press, <SUBTILE 1>, <SUBTILE 2>, (The different disc have different display.)

screen

.For your reference:

If the power is reset or the disc is removed, subtitles will appear in the default language set by the DVD player. If this language is not recorded on the disc, they will appear in the disc's default language.

.Changing the audio soundtrack language

It is possible to change the audio soundtrack language from the default standard to another, if available. This operation works only with discs

.on which different audio soundtrack languages are recorded.

DVD:

Some DVDs have multi-audio output function. Pressing the AUDIO button on the controlrer repeatedly selects the available audio tracks.

When no audio soundtrack language are recorded, "" will be displayed

.on the TV screen.

VCD,CD, MP3:

For VCD pressing the AUDIO button on the controller repeatedly selects the available audio tracks.

< >

STEP INFO TV.SYS ZOOM

.Viewing from another ANGLE [DVDs only]

Some DVDs may contain scenes that have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. The recorded angles will differ depending on the disc being

.played.

When playing a DVD with multi-angle viewing, " / " will appear on the screen. For example, if the disc has two angles available, pressing the ANGLE button on the controller will step you through all available views. The screen OSD will show 1/3 then 2/3 then 3/3 and then back to 1/3 again etc.

screen.

On screen DISPLAY

During playback, you can press the INFO button on the remote to

.show the various information available.

For DVDs, the INFO function button will allow you to view: Press INFO on the remote once, you will see three lines on the 'IV

screen: At the first line they are disc type, subtitle and audio playing from left to right; at the second line it is playing time; at third line they are TITLE and CHAPTER playing,

Press INFO twice, you will see more information on the TV screen: At the first llne are TITLE and CHAPTER (numbers of playing/total); at the second line it is playing time; at the third line the output TV format of DVD and AUDIO (numbers of playing/total); at the fourth line the SUBTITLE and ANGLE (numbers of playing/total); at the fifth line it is output audio format.

.Press the INFO button to no display and cancel this function.

For VCD & CD discs, the DISPLAY functions allows you to view on the screen: at the first line is disc type and track(numbers of playing/total); at the second line is playing time; at the third line is output TV format.

.How to use CLEAR button

If you enter a wrong number in selecting a track, title, or passwords etc, you can press CLEAR to delete the number you have entered.

.TV.SYS setting

This function is TV TYPE If you press this button it will allow you to select three TV types:

REPEAT

If you play a DVD disc, the screen will display:

REP CANCEL

If you play a VCD(PBD OFF) or CD disc, the screen will display:

Program

To the VCD & CD, if you want to play songs such as 5, 6, 3, etc, press PROGRAM button on the remote, and then number key 5, 6, 3, you'll see on the TV screen like:

etc.

Up to 9 tracks can be programmed, and at last press ENTER to start program play,

Repeat A-B (allows you to play a small section of

.the disc repeatedly)

press the A-B button on the remote at the point where you wish the repeat play to start. The display will show REP A. Press A-B button again at the point where you wish the repeat play to finish. The display will show REP A-B. The A-B segment will now repeat continuously until the A-B button is pressed for a third time.

GOTO function

You may directly enter a time, title or chapter number to search fast

.on a disc, the player plays from that point.

For DVD discs, press GOTO button on the remote, the display will show the following:

1.GO to a title or a chapter. For example, to chapter 6 in title 2.

(1) Press GOTO on the remote, the screen shows:

: 1 / 8 :9 / 12

(2)Press the CURSOR (left or right) button and move. The cursor to illuminate the title number. Press button 2 to select title 2, the screen

shows:

: 1 / 8 :6 / 12

Repeat the steps above, select chapter 6, and then press ENTER to selected point.

2.TIME SEARCH

(1)Press GOTO button twice on the remote until the screen shows:

: 1 / 8 --:--:--

(2) Press number buttons to enter hour, minute and second. For example, enter 1,2,2,2,2.then press ENTER, After setting, the disc is played from 1:22:22

.NOTE: some DVD disc will not TIME SEARCH.

For VCD(PBC off status) & CD discs, press GOTO button on the controller, the following will be displayed: -

GO --:--:--

For the GOTO option, enter the digits on the remote for the required start time, Press ENTER button to start playback.

.RETURN function

For Video CD with PBC and multiple menus, press RETURN button on the controller, playback will return to the previous menu automatically.

.ZOOM picture

Depending on the disc being played, you can press the ZOOM button repeatedly allowing the picture to increase accordingly: ZOOM1.5, ZOOM2 and ZOOM OFF,

.In the ZOOM mode, you can use CURSOR buttons to move the picture for optimum viewing.

.VOLUME control

Press VOLUME + on the controller continuously to increase volume. Press VOLUME - continuously to decrease volume.

Note: This is the line level output to TV or connected Amplifier

Playback of MP3 Files

This unit is compatible for the reproduction of recorded pieces in MP3 format. Refer to the following instructions for a correct use:

1)Press the Power button and then the OPEN/CLOSE button to open the drawer. Insert the disc containing the recorded passages in MPg format with the label facing upwards. Press the OPEN/CLOSE button again to close the drawer. After some seconds, on the TV screen will appear

MP3 LIST menu

2)In this menu, the first line is current page/total pages of current directory; the second line is current directory name and the numbers current directory/total directories; the third line is the number of current song/total songs of disc and time of current song; next five lines are the name of 10 songs.

3)Press the CURSOR button you can move the hightlight to the song you want and press ENTER to play it. You can use UP and DOWN CURSOR to gate previous or next page You can also press PREV/NEXT button to play the previous or next song.

4)Another way to select songs is acting directly on the numerical keyboard of the remote control. Input number and press play button.

5)Press RETURN button you can gate MP3 FOLDER menu. In this menu, the first line is current page/total page of the folders; the second line is the song's number of the disc; next five lines is the name of the folder, you can operate it as at MP3 LIST menu. If you select one folder you may enter MP3 LIST menu.

NOTE:

Some button could not be used when playing MP3 disc, they are FAST BWD, FAST FWD, MENU, GOTO, SLOW, TITLE, A-B, PROGRAM, DISPLAY etc.

SUBTITLE AUDIO ANGLE VOLUME

-

PREV. NEXT F.BWD F.FWD

PLAY/SEL

< >

STEP INFO TV.SYS ZOOM

VOLUME

RETURN

ZOOM

Initial settings

Once the initial setting have been set, the player will always operate with the same parameters. The setting will be retained in the memory even after switching off the power.

Initial settings must be in the setup mode, but function can be set in all mode.

Using the setup menu, you may choose the play mode setting, the various outputs, etc.

During STOP or PLAY mode, press SETUP button on the remote, you will see on the screen like picture 1. In the PLAY mode or different disc some item could not be choosed.

Select the menu item desired by using up/down CURSOR button, and then press the ENTER button. You should see such as picture 2. In each menu page, the menu items are showed on the left. Use the right CURSOR button on the remote to the option list or setting on the right. Use the left CURSOR button to go back to the left menu item.

Press the button SETUP to leave the setup menu and return to the TV

DISPLAY.

NOTE:

When you select the function on the Menu, the notation of the function is showed at left bottom.

LANGUAGE SETUP

Press SETUP on the remote control, the screen shows SETUP MENU- MAIN PAGE. Press LANGUAGE SETUP to select OSD, MENU, AUDIO, SUBTITLE setup menu(picture 2). If you choose one language, the OSD, MENU, AUDIO, SUBTITLE's language will be this one first. If the disc has not it, the DVD player will use default language of the disc.

SCREEN SETUP

TV TYPE(picture 3)

4:3 PS~4X3 Pan Scan

Choose this setting you will see the movie fill the entire screen of your TV, But you won't see part of the picture (particularly the right and left edge).

4:3 LB--4x3 Letterbox

Choose this setting if you want to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will occupy a smaller portion of the screen.

16:9 --16x9 Wide screen

Choose this setting if your DVD player is connected to a widescreen TV.

SCRN SAVER (picture 4)

You can choose turn on or off the screen saver.

TV SYSTEM (picture 5)

According to the system of TV to be connected, set the type of the video output to match the TV:

1.Ifthe TV used is PAL, select PAL output signal;

2.If it is NTSC, select NTSC output signal;

3.Or select AUTO if TV is multi-system

Note:

To obtain the best DVD picture, it is strongly recommended to use Multi-system TV to play DVD movie at 'Auto' mode

BRIGHTNESS (picture 6)

You can choose the brightness of the video output.

CONTRAST (picture 7)

You can choose the contrast of the video output. 0 is normal.

AUDIO SETUP ???

OUTPUT (picture 8)

2 CH : the output signal is Analogue 2 ch format. You should select this when you are playing the disc through the AUDIO OUT Right & Left jacks on your DVD player. In this format CENTRE, REAR and SUBWOOFER will not be heard.

5.1 CH: the output signal is ANALIGUE 5.1 CH format. When you play a disc with Dolby Digital, you should choose this in this format, you can turn CENTRE, REAR and SUBWOOFER on or off.

SPDIF/RAW: select this when the DVD player is connected with a power amplifier though DIGITAL OUT coaxial or optical port. The power amplifier to be connected must have Dolby Digital decoding.

SPDIF/PCM: Select this when the DVD player is connected with a 2-CHANNEL DIGITAL MODE OR STEREO AMPLIFIER. When a Dolby Digital or MPEG disc is played, the coaxial port will output in PCM 2-channel format. These program features an uncompressed digital stereo sound track for improved fidelity, when played, discrete stereo sound will be heard from the front right and left speakers.

KARAOKE (picture 9)

Press CURSOR button on the remote to select KARAOKE, you can choose turn off KARAOKE (select OFF item),or turn on KARAOKE (select KARAOLE item).If you turn on KARAOKE function, insert MIC1 MIC2 and adjust MIC VOLUME or MIC ECHO button on the front panel, you can enjoy yourself now.

RETURN

OUTPUT

PICTURE 8

AUDIO SETUP

OUTPUT

CENTER

REAR

SUBWOOFER

DNRON

KARAOKE ???OFF

KARAOKE

PICTURE 9

CUSTOM SETUP

PARENTAL CONTROL(picture 10)

When selecting PARENTAL CONTL items, the screen will be changed to the PASSWORD INPUT page Input the correct password, you will enter PARENTAL CHANGE page(picture 11). When playing

disc with parent lock function, you may select an age control grade according to grade of disc and your desired. For example: Select PG13, and then you cannot play DVD video disc rate higher the PG13 grade. Parental control grades are listed from Iow to high, 1 is lowest grade adults is the highest grade.

CHANGE PASSWORD(the default password Is 8888)(picture 12)

CUSTOM SETUP

PARENTAL CONTL8

CHANGE PASSWORD

ANGLE MARK

DEFAULT

RETURN

PARENTAL CONTROL

PICTURE 10

CUSTOM SETUP

Select CHANGE PASSWORD item, you wfil see picture like right, you enter old password first and press ENTER, and then you you will see another picture, input new password and press ENTER. Now you change the password.

Notes:

The original password is 8888 when the unit is first time turned on.

ANGLE MARK(picture 12)

You can choose display ANGLE character or not.

DEFAULT (picture 13)

INPUT PASSWORD

THEN PRESS ENTER

CANCEL: RETURN KEY

INPUT NEW PASSWORD

WITH NUMBERS

CANCEL: RETURN KEY

LEVEL

PICTURE 11

CUSTOM SETUP

PARENTAL CONTL8

CHANGE PASSWORD

ANGLE MARK >> ON

DEFAULT OFF

RETURN

ANGLE MARK DISPLAY

If you select the READ, each function setting returns to the initial status setting by the factory.

PICTURE 12

CUSTOM SETUP

PARENTAL CONTL8

CHANGE PASSWORD

ANGLE MARK

DEFAULT >> READ

RETURN

DEFAULT VALUE

PICTURE 13

For Your Reference: ?????????????????????????????????????????????

Disc handling and maintenance

Handling precautions

Hold the disc by the edges so the surface will not soiled with fingerprints.(A)

Fingerprints, dirt and scratches can cause skipping and distortion.

Do not write on the lable side with a ballpoint pen or other writing utensils

Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

Be careful not to drop or bend the disc.

Do not install more than 1 disc on the disc tray.

Do not try to close the disc tray when the disc is not installed properly.( B )

Be sure to store the disc in its exclusive case when not in use .

If the surface is soiled ( C )

Wipe gently with a soft, damp (water only ) cloth.

When wiping discs, always move the cloth from the center hole toward the outer edge.

(if the wipe the discs using a circular motion, circular scratches are likely to occur, which will cause noise.)

If the disc is brought from a cold to a warm environment, moisture may form on the disc.

Wipe this moisture off with a soft, dry, lint-free cloth before using the disc.

Improper disc storage

You can damage discs if you store them in the following places:

Areas exposed to direct sunlight

Humid or dusty areas

Areas directly exposed to a heat outlet or heating appliance

Do not try to play Photo CD best

Maintenance

Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit.

Wipe this unit with a dry soft cloth.

If the surfaces are extremely dirty, wipe clean with a cloth, which has been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe again with a dry cloth.

Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do not use compressed air to remove dust.

Symptom(Video CD)

Angle

Recorded onto some DVD discs are scenes, which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.).With such discs, the ANGLE button can used to view the scene from different angles.

Chapter number

These numbers are recorded on DVD discs. A title is subdivided into many sections, each of which is numbered, and specific parts of video presentations can be searched quickly using these numbers.

DVD

This refers to a high-density optical disc on which high-quality pictures and sound have been recorded by means of digital signals. lncorporating a new video compression technology(MPEG)

and high-density recording technology, DVD enables esthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded).

PBC(playback control)

This is recorded on a video CD (VERSION 2.0).the scenes or information to be viewed (or listened to ) can be selected interactively with the TV monitor by looking at the menu shown on the TV monitor.

Subtitle

These are the printed lines appearing at the bottom of the screen, which translate or transcribe the dialogue. They are recorded on DVD discs.

Time number

This indicates the playtime recorded on DVD discs. When a disc contains two or more movies, these movies these movies are numbered as title 1, title 2,etc.

Track number

These numbers are assigned to the tracks which are recorded on video CDs and CDs. They enable specific tracks to be located quickly.

Video CD

This contains recordings of pictures and sound whose quality is on a par with that of videotape. This player also supports video CDs with playback control (version 2.0 ) .

Power Requirements: AC 110V/220V, 60Hz/50Hz

Power Consumption: 25w(approx.3.5W when power is OFF by the power button or the remote control)

Signal system: PAL/NTSC

Weight:

Dimensions: 290(W)X430(D)X95(H)mm(excluding protrusions)

Operating temperature range: +5 to 35 C

Operating humidity ranger: 5 to 90%(no condensation)

Discs played :

(1)DVD-VIDEO disc

12cm single-sided, single-layer 12cm single-sided, double-layer

12cm double-sided,double-layer(one layer per side ) 8cm single-sided, single-layer

8cm single-sided, double-layer

8cm double-sided, double-layer (one layer per side )

(2)compact disc (CD-DA,VIDEO CD)

12cm disc 8cm disc

S-video output:

Y output level: 1 Vp-p(75)

C output level: 0.300Vp-p(75)(PAL) 0.286 Vp-p(75)(NTSC)

Output connector: S terminal (1 system) Video output: Output level: 1 Vp-p(75 )

Output connector: pin jack (2 systems) Audio output: Output level: 2 Vrms (1kHz,0dB)

Output connector: Pin jack 5.1ch mixed output:1 system (2ch)

5.1ch discrete output:1 system (5.1ch.)

Audio signal output characteristics:

(1)Frequency response : DVD (linear audio); 4Hz-22kHz(48kHz sampling)

4Hz-22kHz(96kHz sampling) CD audio:

2Hz-20kHz(EIAJ)

(2) S/N ratio:

CD audio:115dB(EIAJ)

(3) Dynamic range: DVD(linear audio):102dB CD audio:99dB(EIAJ)

(4)Total harmonic distortion: CD audio:0.0025%(EIAJ)

Digital audio output:

Optical digital output: Optical connector

Coaxial digital output: Pin jack

Pickup: Wave length:655nm

Phone Jack : Stero,3.5jack

Laser power: CLASS1

Specifications are subject to changer without notice Weight and dimensions approximate.