Common Functions & Commands

Model PT-1600

??

1.Cut

1 (1 = cut-pause; no chain print)

2 (2 = no cut-pause; no chain print)

3 (3 = cut-pause; chain print)

4 (4 = no cut-pause; chain print)

2.Contrast

+ 2 to ???2 ( 0 = default, + = darker,

???= lighter)

3.Auto Reduction

??2003 Brother International Corporation, 100 Somerset Corporate Boulevard, Bridgewater, NJ 08807. All rights reserved. All trademarks and registered trademarks referenced herein are the property of their

1.Copies

1-99

3. Block No.

Choose the block numbers (start/end) to print.

4.Mirror (print text in reverse order)

Off

On

1. GLB (Global) Size

Set font size for label.

Auto

1mm

2mm

3mm

4mm

6mm

9mm 12mm

2. GLB (Global) Wide

Set label font width.

Minimum

Narrow

Format Normal

Wide

3. GLB (Global) Style

Set label font style - individual line style overrides settings.

Normal

Bold

Outline

Italic

Italic + Bold Italic + Outline

4. Align

Specify text alignment.

Left

Justify

Right

Center

General

Name

Badge

1.Press ??? until Normal. Press to select.

2.Type Text ( for new line, or

to place a block of text to the right).

3.To change text style or size per specific line, use to place cursor on line to be

??? to specify different font sizes.

to choose. Press to enter.

4.

1.Press ??? until Normal. Press to select.

2.Set label length ??? use number pad to type length or to specify. Press to enter.

3.Type Name. Press for new line.

4.Type Company.

5.To change text style or size per specific line, use

to place cursor on line to be changed. Use

??? to specify different font types.

to choose. Press to enter.

??? to specify different font sizes.

to choose. Press to enter.

4.

1.Press ??? until Rot-Rep. Press to select.

2.Set the length of the label with (BLK LEN ), use number pad to type length or arrows

4.Type Text.

5.To change text style or size per specific line, use to place cursor on line to be

??? to specify different font sizes.

to choose. Press to enter.

1.Press ??? until Flag. Press to select.

2.Set the diameter of the cable/wire (FLAG OI )

arrows to select, arrow to next option.

3.Set the length of the label (FLAG LEN), use

number pad to type length or arrows

to select, arrow to the next option.

6.Type text.

7.To change text style or size per specific line, use

to place cursor on line to be changed. Use

??? to specify different font types.

to choose. Press to enter.

??? to specify different font sizes.

to choose. Press to enter.

8.

1.Press ??? until Port. Press to select.

Port

Label (cont.)

2

Panel

Label

7C-A01 7C-A02

5.To change text style or size per specific line, use to place cursor on line to be changed. Use

??? to specify different font types.

to choose. Press to enter.

??? to specify different font sizes.

to choose. Press to enter.

6.

4.Type Text.

(continue to next column)