User Manual

F5D4078 8820ea00814

English

Fran??ais

Deutsch

Nederlands

Espa??ol

Italiano

??eSky

These adapters also use xtendnet??? technology to ensure the most robust powerline network in the market.. Each additional Belkin Play Powerline HD or Surf Powerline Adapter that is plugged in is capable of repeating the data signal for maximum coverage of your home..

The installation of the Adapter only requires that a 10/100/1000Mbps Ethernet port is available on your device.. This makes the Play Powerline HD Networking Adapter compatible with any device, including Mac, Windows, and UNIX machines.. Note that you need at least two adapters to create a powerline network..

For security, all HomePlug devices are equipped with 128-bit AES encryption.. The private home power grid plus encryption makes HomePlug significantly more secure than competing technologies..

The Play Powerline HD Networking Adapter provides the best solution for no-new-wires home networking.. With easy plug-and-play installation, and the reliability of HomePlug, the Play Powerline HD Networking Adapter is the best solution for high-speed networking..

Power LED

System Requirements

???At least 2 HomePlug AV-compatible devices

???Available Ethernet port on each computer or network device

???Available power outlet

???Standard home powerline wiring

???CD-ROM drive

Package Contents

???Play Powerline HD Networking Adapter(s)

???HomePlug User Manual (on CD)

???CD-ROM

???RJ45 Ethernet Cable(s)

CONFIGURATION

Overview

The Adapter uses 128-bit AES encryption to block access from the outside.. By default, the protection is enabled.. However, it is

recommended that you change the default network password with the ???Encryption??? button located on the units..

Changing the Network Password

1.With both Adapters plugged into the wall, press the ???Encryption??? button on both units for 10 seconds.. The password on these Adapters has now been changed to a random value..

2.Next, press the ???Encryption??? button on one unit for more than 1 second, but less than three seconds..

3.Within two minutes, press the ???Encryption??? button on the second unit for more than 1 second, but less than three seconds..

4.The new network password has now been saved to the second unit.. The password will not be lost, even if the Adapters are unplugged from the wall..

1.If the default network password has been changed, a new Adapter will have to load the new password before it can join the network..

2.Press the ???Encryption??? button on an encrypted unit for more than 1 second, but less than three seconds..

3.Within two minutes, press the ???Encryption??? button on the new unit for more than 1 second, but less than three seconds..

4.The new device has now been loaded with the network password and added to the current powerline network..

Using a pointed object, press and hold the ???Reset??? button for one second to restore defaults.. This procedure resets the network password to the default out-of-box value..

Free Tech Support* *National call rates may apply www.belkin.com

You can find additional support information on our website www..belkin.. com through the tech???support area.. If you want to contact technical support by phone, please call the number you need from this list*..

We, Belkin International, Inc.., of 12045 East Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device,

F5D4078v1,

to which this declaration relates, complies with Part 15 of the FCC Rules.. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation..

Caution: Exposure to Radio Frequency Radiation

The radiated output power of this device is far below the FCC radio frequency exposure limits.. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation.. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation..

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.. These limits are designed to provide reasonable protection against harmful interference in a residential installation..

This equipment generates, uses, and can radiate radio frequency energy.. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna..

???Increase the distance between the equipment and the receiver..

???Connect the equipment to an outlet on a circuit different from that to which the receiver is connected..

???Consult the dealer or an experienced radio/TV technician for help..

Modifications

The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin International, Inc.., may void the user???s authority to operate the equipment..

What this warranty covers.

Belkin International, Inc.. (???Belkin???) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship..

What the period of coverage is.

Belkin warrants the Belkin product for two years..

What will we do to correct problems?

Product Warranty.

Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product)..

What is not covered by this warranty?

All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin???s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with..

The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i..e.. brownouts or sags), non-authorized program, or system equipment modification or alteration..

How to get service.

To get service for your Belkin product you must take the following steps:

1.Contact Belkin Limited using the details provided on page 8..

2.Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim..

Belkin reserves the right to review the damaged Belkin product.. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser.. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser.. Damaged equipment must remain available for inspection until the claim is finalized.. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have..

How state law relates to the warranty.

THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN..

THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS

REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY

OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,

ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY..

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you..

IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,

DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH

AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING

OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES..

This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you..