TUBE AMP MODELER TM300
Thank you for showing your confidence in us by purchasing the BEHRINGER TUBE AMP MODELER TM300. This high-quality effects pedal provides 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds from clean, crunch to super-fat distortion.
Thanks to its high-performance features you can achieve the typical hard rock or heavy metal distortion sounds.
1. CONTROLS
Top view
The LEVEL control adjusts the output level.
The LOW control allows you to boost/cut the low-frequency range.
The HIGH control allows you to boost/cut the high-frequency range.
The DRIVE control adjusts the amount of overdrive effect.
The MIC switch simulates the microphone placement (orientation and distance) in relation to the cabinet. Select CLSIC (Classic: distant mic placement without ambience) to achieve high mid-range content and a greater definition of notes like with classic early tube amps. In CNTR (Center: close miking at the center of a cone) you get greater high mid-range content and increased low-end for mega crunchy results. OFF X (Off Axis: close miking at the edge of a cone) is very similar to CNTR, but produces a smoother, softer sound with less upper mid-range content; perfect in combination with MODE position HOT.
Use the MODE switch to dial up one of 3 gain settings (HOT, HI G, CLN) that you want to combine with the amp setting.
Use the AMP switch to select one of 3 great classic tube amps. You will recognize these classic amp tones as soon as you hear them. For crystal-clear, transparent sounds with dynamic bass select TWEED. For aggressive mids and incredible sustain select BRIT(ISH). Rounder and more evened-out (yet still sophisticated) sounds can be dialed up if you select CALIF(ORNIAN); it???s perfect for leads.
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
TUBE AMP MODELER TM300
The TM300 has no on/off switch. As soon as you insert the plug into the IN connector, the TM300 is on. When not in use, remove the plug from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.
2. WARRANTY
For our current warranty terms, please refer to our website at http://www.behringer.com.
BEHRINGERisconstantlystrivingtomaintainthehighestprofessionalstandards.Asaresultoftheseefforts,modificationsmaybemade fromtimetotimetoexistingproductswithoutpriornotice.Specificationsandappearancemaythereforedifferfromthoselistedorshown.
4. SAFETY INSTRUCTIONS
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice s??lo accesorios y aditamentos autorizados. No intent?? reparar el producto usted mismo. Contacte a nuestro personal t??cnico cualificado para servicio y reparaciones, especialmente cuando la fuente o el cable de alimentaci??n est??n da??ados.
???? ???????????????????????????? ???????????? ???????????? ???? ???????????????????? ???????? ?? ??????????. ???????????????????? ???????????? ???????????????????????????? ???????????????????????????? ????????????????????. ?????????????? ???? ???????????????????????? ???????????? ????????????????????????????. ???????????? ?????????? ?????????????????????? ???????????? ?????????????????????????????????? ???????????????????????????????????? ????????????????, ???????????????? ?????? ???????????????????????? ???????????????? ?????????????? ?????? ?????????????? ??????????.
Die deutsche Anleitung ist erh??ltlich @ www.behringer.com
Manuel francophone en t??l??chargement sur www.behringer.com
Manual en espa??ol disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com
?????????????????????????? ?????????????????????? @ www.behringer.com
Polska instrukcja dost??pna jest pod adresem @ www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen k??ytt??ohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillg??nglig p?? www.behringer.com
Dansk vejledning findes p?? @ www.behringer.com
Manual portugu??s dispon??vel @ www.behringer.com
???????????????? ???????????????????? ?????????????? ?????????????????? ?????? ?????????????????? www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER, the BEHRINGER logo and JUST LISTEN are trademarks of BEHRINGER. ALL RIGHTS RESERVED. ?? 2006 BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-M??nchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
