THREE WHEEL DOLL

JOGGING STROLLER

MODEL NUMBER: 09960

Assembly

Instructions.

Adult Assembly

Required.

Visit us online at www.badgerbasket.com

Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST) Web: http://www.badgerbasket.com/parts ??? E-mail: parts1@badgerbasket.com

Mail: PO Box 227, Edgar, WI 54426-0227 ??? Phone: 715-352-2311 ??? Fax: 715-352-3163

BEFORE YOU BEGIN ASSEMBLY:

Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store or return the product to them. Contact Badger Basket for assistance. Most problems are resolved without you needing to leave home. When contacting us, please have this instruction manual, your product model number, and

your product version code ready. For fastest service, go to http://www.badgerbasket.com/parts

Your Product Version Code is: 1.0/0508/HF

CARE INSTRUCTIONS:

Wipe metal and plastic parts clean with a damp cloth and mild soap as needed. Spot clean the fabric parts with water and mild detergent as needed.

WARNING - CAUTION

READ ALL INSTRUCTIONS before use of this product. Product and/or Hardware may include small parts. Choking Hazard! Keep unassembled parts out of the reach of small children. Use only the parts and hardware provided by Badger Basket. Keep instructions for future use. Do not use the product if it is damaged or broken. Periodically inspect the product and retighten hardware if needed. This item is a toy for dolls only. It is never to be used for real children or pets.

For children ages three (3) years and older.

STEP 1: Unfold the stroller.

STEP 2: Insert the short axle through the front wheel, and add one SPACER (B) and one frame cap to each side.

STEPS 3 & 4: Attach the front wheel to the stroller frame by sliding it onto the front posts and pushing down on the plastic rings to secure the wheel in place.

STEP 5: Insert the long axle through the rear posts of the stroller frame. Add one SPACER (A) to each end of the axle; then snap the wheels on (squeeze the latch open, slide the wheel onto the axle, and release the latch). Gently tug the wheels to ensure they are snapped on properly.

STEP 6: Adjust the height of the handle by pressing the buttons on either side.

STEP 7: Lock the safety latches.

STEP 8: Fold the stroller by releasing the safety latch and pulling up on the two frame buckles located on both sides of the stroller seat.

1. 2.

3.

4.

5. 6.

7. 8.