SATELLITE DIGITALAUDIO

CONTROLAND

RECEIVER SYSTEM

??SATELLITE RECEIVER SYSTEM

MODELS SRSIR-001, SRSIR-001FM and SRSIR-001FMR

OWNER'S

MANUAL

Released: 06-18-02.

Revision A: Added Model Number: 08-20-02.

128-6374A

1 of 12

ABOUT SIRIUS??

Congratulations. You are one step closer to experiencing Sirius Satel- lite Radio. Sirius will revolutionize you???re in-vehicle entertainment with:

??100 channels of original programming, including ???

??60 channels of completely commercial-free music ??? guaranteed.

??40 channels of news, sports and entertainment

??Coast-to-Coast reception

??Digital-quality sound

All music content is selected and developed in-house by Sirius??? team of Master Music Programmers ??? talented and seasoned professionals who love the music as much as the listeners. World-class partners such as ESPN, ABC, CNBC, Bloomberg, Discovery and Radio Disney

are developing news, sports and entertainment programming.

WHAT TO DO TO GET SIRIUS??

It???s easy. You have one of two choices to activate your service:

(1)Visit the website at siriusradio.com

Click on the ???JOIN??? section. You will then need to follow some simple directions and provide us with some critical information in order to activate your service.

(2)Call us at 1-877-539-SIRIUS (7474)

One of our friendly Customer Care representatives will take the necessary information and walk you through the activation process.

WHAT DO YOU NEED

There are a couple of pieces of information that you will need when you are ready to activate the service. Please have the following ready:

??Sirius ID number / ESN ??? from the tuner module

??Vehicle Identification Number

Valid Credit Card information

Trademarks

SIRIUS?? is a registered trademark of SIRIUS?? Satellite Radio. All Rights Reserved. www.sirius.com

Other product names mentioned in this manual may be trademarks

or registered trademarks of their respective companies and are hereby acknowledged.

HOW THE SYSTEM OPERATES

Control of system functions is achieved by the wired SCU, which can be conveniently mounted to the dashboard in a number of configurations. In addition, an optional wireless remote (Audiovox P/N SAT-RC) to control SCU functions is also available. The SIRIUS?? Satellite Radio signals are received by the antenna and are routed to the RRU, whose RF output

is supplied to the FM Switching Box.

2

128-6374A

2 of 12

The FM Switching Box, in turn, is capable of transmitting on 7 FM fre- quencies; namely, 88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz, 89.1MHz and 89.3MHz.

The frequency is selected using the FM band of the existing vehicle radio. (The default FM frequency is 88.5MHz.) Select the FM frequency with the least noise or static, and then use the SCU to choose the SIRIUS?? channel for your listening pleasure.

NOTE: When a FM frequency is not desired entering the following code

can be use to mute it: (SFT) + 0928 + (SFT)

Figure 1. SIRIUS?? Satellite Receiver System

SATELLITE SYSTEM CONTROL UNIT (SCU)

The SCU provides for complete control of the system by means of its Liquid Crystal Display (LCD) and associated function buttons.

3

Figure 2. Satellite System Control Unit (SCU)

1.Liquid Crystal Display (LCD): Presents a display of various broad- cast, song title, performer(s), advisory/error messages, etc.

2.Down Directional (W) Button: When momentarily pressed and re- leased, the channel number will decrease with each press; when pressed and held, the channel number will decrease continuously. Release the button when the desired channel number is displayed. When used in conjunction with the Shift (SFT) button, the MUTE function is enabled. (See Mute Function Button section below)

3.Keypad Buttons 0-9: These buttons are used to directly enter a desired channel number. Momentarily press the Shift (SFT) button followed by the desired channel number then the Shift (SFT) Button. They are also used when entering and recalling preset channel numbers into memory.

4.Up Directional (X) Button: When momentarily pressed and released, the channel number will increase with each press; when pressed and held, the channel number will increase continuously. Release the button when the desired channel number is displayed. When used in conjunc- tion with the Shift (SFT) button, the SCAN function is enabled. (Refer to the Scan Function Button section)

5.Infrared Detector: Provides detection of the infrared control signal transmitted by an optional wireless remote control unit (P/N SAT- RC) for remote operation. Make sure no obstructions are blocking the signal path.

6.Shift (SFT) Button: When momentarily pressed, this button pro- vides access to additional functions, such as audio MUTE, Channel SCAN, Direct Channel Access, Category Select, Parental Lock-Out etc.

128-6374A

3 of 12

When pressed and held, this button allows you to switch between pre-set channel groups 1 and 2. This button is also used to invoke the Category

Mode, which can also be achieved by Momentarily Pressing and Releas- ing the (SFT) button then Pressing and Holding the (SFT) button again

for 2 seconds, ???ENTER CATEGORY TUNE??? or ???ENTER CHANNEL TUNE??? will be displayed .

7.Power On/Off ( ) Button: Press this button to apply power to the Satellite Radio Receiver system. The associated radio must be turned on and off separately using its power switch.

This button is also used to back light the number keys when the system is on. To do so, momentarily pressed and release the Power On/Off Button. The back lighting will last for 10 seconds.

8.Mute Function Button: Momentarily press the shift (SFT) button;

then press and hold the Down directional (W) button to enable the audio mute function. When enabled, the audio program is muted and the Mute

icon ( ) appears in the lower right corner of the SCU display. Press any button to exit the mute function.

9.Scan Functions:

Scanning All Channels ??? [enter code (SFT)+0960+(SFT)] Momen- tarily press the Shift (SFT) button; then press and hold the Up directional

button (X) for 2 seconds to enable the Channel Scan function. When enabled, each channel is scanned in the either direction for 10 seconds before moving on to the next active channel. This permits channel preview or introductory sampling of channel programming. The channel (CH) icon on the SCU screen will appear in reverse image (white-on-black) format. Press any button to exit the Scan function.

Scanning Preset Channels - [enter code (SFT)+0961+(SFT)] This function works in the same way as the Scanning All Channels mode, except this mode will only scan the preset channels. You can configure a total of 40 preset channels, 20 in Channel Mode (two groups of 10 chan- nels, upper and lower) and 20 in Category Mode (two groups of 10 channels, upper and lower). Preset channel being previewed are displayed in the lower right corner. A black number on white background indicates that it is part of the upper group of channels and a White number on a Black background indicates that it is part of the lower group. When scanning these channels an indicator will appear in the right corner of the screen.

??(SR1) = Lower Preset Channel Group (first 10 channels)

??(SR2) = Upper Preset Channel Group (next 10 channels) To switch between the two groups of preset channels press and hold the Shift (SFT) button for 2 seconds until a tone is heard indicating the switch was made.

SATELLITE RADIO RECEIVER UNIT (RRU)

The RRU is a central data-receiving unit, which is required to process the satellite signals received by the externally mounted antenna (purchased separately). The RRU contains the processing logic needed to recognize, decode the incoming SIRIUS?? program information and then distribute a recognizable RF signal to the FM Switching Box .

NOTE: The SIRIUS?? signal can be received and processed virtually anywhere as long as there are no obvious Satellite Signal Obstructions such as parking garages, tunnels.

The RRU is typically installed under the seat or in the trunk/rear of the vehicle.

4

128-6374A

4 of 12

Functional Operation

Functional operation of the system is controlled by the buttons on the SCU; i.e., the sequence in which they are pressed and the length of time button activation occurs.

POWERING UP THE SYSTEM

After the system has been properly installed it can be powered on in the following manner:

1.Apply power to the vehicle???s radio.

2.Apply power to the Satellite System Control Unit SCU by momentarily pressing (1 second) the Power On/Off button ( ).

3.Tune the vehicle???s radio to a selected FM frequency between

88.1MHz and 89.3MHz. If you are not sure which frequency to select, use the radio???s SEEK, SCAN or TUNE function to scroll through the frequencies until the satellite signal is played through the speakers.

NOTE: The default FM frequency is 88.5MHz.

4.Enter this frequency into memory using one of the preset buttons on the vehicle???s radio; make note of the FM band and preset number.

5.After the correct frequency is identified and entered into the radio???s memory, the SCU will display the preview channel (CH184) if the SIRIUS?? service is being activated for the first time (see DISPLAYING THE IDENTIFICA TION (ID) CODE). If the SIRIUS?? service was previously activated, the SCU will return to the SIRIUS?? channel used when the system was last turned off.

DISPLAYING THE IDENTIFICATION (ID) CODE

Once the system is installed you must first subscribe to the SIRIUS?? Radio service to activate the system. The SIRIUS?? Radio service uses an ID code to identify your radio. This code is needed to subscribe to SIRIUS?? Radio, and if needed, is also used to report any problems should there be any in the future.

To display the radio ID code, proceed as follows:

1.To display the ID Code enter (SFT)+0+(SFT)

2.Make a note of your radio ID Number

3.Contact SIRIUS?? Radio on the web, or by phone, to

subscribe to the service.

Figure 3. The SIRIUS?? Logo Appears-and-Satellite Program is

Loaded

Figure 4. SIRIUS?? ID Code

SELECTING A SATELLITE CHANNEL

Selecting a satellite channels can be accomplished in four ways;

1.Scrolling Channel-by-Channel

2.Selecting a Group or Category of Channels

3.Scrolling and Selecting a Preset Channel

4.Direct Channel access.

The following subsections describe the procedure for each of the op- tions.

NOTE: If the SIRIUS?? signal reception appears to be noisy or contains audible background static, try switching to another FM frequency. Refer to Direct FM Frequency Selection for details on how to select another FM frequency.

5

128-6374A

5 of 12

A typical channel display will appear as shown below.

CHANNEL

NAME PRESET GROUP INDICATOR

Confirmation Tone(s) Function

There are two basic functions of this feature; the Command Confirmation Tone, the Station Pre-Set Program Confirmation Tones. The following is

ARTIST

NAME

SONG TITLE

SR1 -or - SR2

a description of each of these functions:

Figure 5. Sample SIRIUS?? Display

USING THE UP/DOWN BUTTONS

This section describes two ways the Down (W) and Up (X) directional buttons are used to select an SIRIUS?? channel. Proceed as follows:

1.To advance one channel at a time in the chosen direction (Up or

Down), momentarily press and release either directional button (WX) until a desired channel is reached.

2. To advance rapidly in the chosen direction (Up or Down), press and hold either directional button (WX). Release the directional

button when a desired channel is reached.

Figure 6. Using the UP / Down Buttons

NOTE: When an invalid (no broadcast) channel is encountered, the channel is automatically skipped.

6

DIRECTLY ACCESSING A CHANNEL

This section describes the procedure used to directly access a specific channel, this is different then making direct access in Category mode (see SELECTING CHANNEL CATEGORIES)

1.With the system powered up, momentarily press the Shift (SFT) button causing the first channel number in the current category to flash for 5 seconds. The flashing number indicates the Channel number in Channel mode.

2.While the number is flashing, use the number buttons on the keypad to enter the channel desired. The selected channel number will flash for 5 seconds and then remain steady.

The flashing number indicates the value of the Category in

Category mode.

NOTE: If the selected channel is not available within the band, a ???In- valid Channel??? message will appear on the display and the system will remain tuned to the previous channel.

128-6374A

6 of 12

PRESS KEYPAD BUTTONS

TO SELECT DESIRED

CHANNEL

Figure 7. Accessing Channels

SELECTING CHANNEL CATEGORIES (only in Category Mode)

This section describes the procedure used to select a specific group or category of entertainment. Entering into category mode can be accom- plished either by Pressing (SFT)+0981+(SFT) or to quickly shift between Category mode and Channel mode, momentarily Press and release (SFT) then Press and Hold (SFT) for 2 seconds, ???ENTER CATEGORY TUNE??? or ???ENTER CHANNEL TUNE??? will be displayed .

1.With the system powered up, momentarily press the Shift (SFT) button causing the first channel number in the current category to flash for 5 seconds.

2.While the number is flashing, momentarily press and release either directional button (WX) a desired category is reached. The category will advance one at a time and will also flash for 5 seconds. If no further advance is made, the flashing will stop and the category will then remain steady.

3.To advance rapidly in the chosen direction (Up or Down) and while the channel number is flashing, momentarily press and release either directional button (WX) in a rapid manner. Re- lease the directional button when a desired channel is reached.

Figure 8. Selecting Channel Categories

The channel tuning will automatically wrap around from the last to the first channel in that category or vice-versa. When a new category is chosen, the radio will automatically select the first channel in that category.

NOTE: If a directional button is Pressed and Held channels will begin to scroll in numerical sequence through all categories until the button is released. This navigation mode will continue to function in the same manner in the new category. The user must exit this mode before attempting to perform any other function. To exit this mode, enter Shift (SFT) 0980 Shift (SFT).

PRESETTING DESIRED CHANNELS

This section describes how to preset up to 20 channels on your SCU (two groups of 10 channels, upper and lower) for rapid and easy access. Proceed as follows:

1.Select the desired channel you wish to save in memory by using the directional buttons (WX), direct access method, or category select tuning method.

2.With the desired channel displayed, press and hold any one of the numbered keypad buttons until the confirmation tone (or second tone) is heard

(Refer to Confirmation Tone(s) Function). Continue with this process until the first group of 10 preset channels is loaded (lower group).

NOTE: There is a preset channel group indicator icon located in the top right corner of the SCU display. This is used to determine which group you are in.

??(SR1) = Lower Preset Channel Group (first 10 channels)

??(SR2) = Upper Preset Channel Group (next 10 channels)

3.Repeat the procedure in steps 1 and 2 to save nine other desirable channels for quick access.

Figure 9. Setting Preset Channels

7

128-6374A

7 of 12

Each category or group is assigned a sequential block of channels. To navigate within a category, enter Shift (SFT) 0981 Shift (SFT). This mode will allow the user to switch between channels within a chosen category.C

CODE SELECTION

2588.9MHz

2689.1MHz

2789.3MHz

Continue with this process until the second group of 10 preset channels is loaded (upper group).

Preset channels being previewed are displayed in the lower right corner. A black number on white background indicates that it is part of the upper group of chan- nels and a White number on a Black background indicates that it is part of the

lower group.

SPECIAL FUNCTIONS USING THE SHIFT BUTTON

There are a number of user preference functions that can be adjusted simply by using the Shift (SFT) button with a specific number code. These functions are explained in the following paragraphs.

In general, a shift/code is entered in the following manner:

(SFT) represents Shift button activation and XX represents the specific function code. (The 4-digit code always starts with 09.)

DIRECT FM FREQUENCY SELECTION

The selection of a specific FM frequency can be directly accessed us- ing the appropriate code; these codes are presented as follows:

8

Figure 10. Modulator Frequency Codes

NOTE: The default frequency is 88.5MHz

SYSTEM DEFAULT SHIFT CODE

Defaults refer to the settings that are entered at the factory. When code 31 is entered, the system is reset to the following defaults:

1.All channel presets cancel and revert to channel 184.

2.The LCD backlighting reverts to Green

3.Button confirmation tone is turned on.

4.All channels that were previously Skipped are reinstated.

5.Previously Locked Out Channels are released by entering

(SFT)+0994+(SFT).

LCD CONTRAST SHIFT CODE

To change the LCD contrast:

1.Enter code 35.

2.Use the Up and Down directional buttons to increase or decrease display contrast, respectively.

3.Press the SFT button to exit LCD contrast mode.

128-6374A

8 of 12

LCD BACKLIGHT DIMMING SHIFT CODE

To enable the LCD backlight dimming feature:

1. Enter shift code 36, ???DIMMING ADJUST??? will be displayed. 2. Use the Up and Down directional buttons to increase or

decrease display dimming, respectively.

3. Press the (SFT) button to exit LCD backlight dimming mode.

BUTTON CONFIRMATION TONE SHIFT CODE

. Normally, a beep confirmation tone is heard each time a button is pressed on the SCU. To silence this confirmation tone:

1. Enter code 40.

2. To turn the beep tone on again, enter code 41.

LCD BACKLIGHT COLOR SHIFT CODES

The backlight color for the LCD display can be either Green or Amber; to select the desired color, enter one of the following codes:

1. Green-51

2. Amber-52

SCAN SET SHIFT CODES

To invoke the Scanning mode of Normal Preset or Normal Non-Preset channels:

1. Normal Channel Scan-60 ???ENTER CHANNEL TUNE??? will be displayed: Operation in normal mode, whereby channels can be scanned in sequential order, up or down.

2. Preset Channel Scan-61 ???ENTER PRESET CHANNEL TUNE??? will be displayed: Operation in this mode makes channel scanning possible only within the same category or group.

CHANNEL/CATEGORY SELECTION SHIFT CODES

To invoke the Channel(Normal)/Category selection mode:

1. Normal (Default Mode)-80: Operation in normal mode, whereby channels can be selected in sequential order, up or down.

???SIRIUS??? Will be displayed in the lower portion of the LCD Screen.

2. Category-81: Operation in this mode makes channel changing possible only within the same category or group.

CHANNEL SKIP SHIFT CODE

PARENTALCONTROLCODES

1.Current Channel Parental Lock Out----92: Lock Out the current

channel so that it may only be accessed with a chosen password.

(SFT+0992+SFT) NOTE: This function can only be selected when

directly accessing the channel(s) to be locked out.

2. Parental Lock Out Security Code Change----93: This code allows the user to change the Lock Out Security Code . (SFT+0993+SFT)

3.Release Parental Lock Out----94: This code is used to Release the current Locked channel. (SFT+0994+SFT)

4.Initialize Security Code ----98: This code is used to set and use a

security code (password) into memory. (SFT+0998+SFT) When this

codeis entered, ???ENTER MASTER CODE??? will be displayed.

NOTE: DEFAULT SECURITY CODE = 0000

SYSTEM MASTER CODE = 5246

128-6374A

9 of 12

DISPLAY MESSAGES

When problems are encountered during SIRIUS?? system operation, a message may appear on the display. The following table outlines the most common problems and provides a probable cause(s) for each and a suggested corrective action(s) to restore normal operation.

10

Troubleshooting Considerations

The following table presents a few possible causes of system operating faults, their probable causes and the remedial action suggested to re- store the system to normal operating conditions.

Troubleshooting Considerations

128-6374A

10 of 12

Specifications

FM Switching Box (For SRSIR-001FM)

Usable Frequencies 88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz, 89.1MHz, 89.3MHz

11

128-6374A

11 of 12

If you need help, just call Audiovox???s toll-free telephone assistance line at 1-800-645-4994

?? 2002 AUDIOVOX ELECTRONICS CORP., HAUPPAUGE, N.Y.

12

128-6374A

128-6374A

12 of 12