Acer Projector

H5360 Series

User's Guide

Copyright ?? 2009. Acer Incorporated.

All Rights Reserved.

Acer Projector H5360 Series User's Guide

Original Issue: 08/2009

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector H5360 Series

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

iii

Information for your safety and comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

???Install the power supply unit before connecting the power cord to the AC power outlet.

???Unplug the power cord before removing the power supply unit from the projector.

???If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings!

???Do not use this product near water.

???Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.

???Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

???Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

iv

???To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

???Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

???This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

???Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

???If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

???Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

???This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

???Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

v

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

???the power cord or plug is damaged, cut or frayed

???liquid was spilled into the product

???the product was exposed to rain or water

???the product has been dropped or the case has been damaged

???the product exhibits a distinct change in performance, indicating a need for service

???the product does not operate normally after following the operating instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

???Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes.

???Turn on the projector first and then signal sources

???Do not place the product in following environments:

???Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary.

???Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

???Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the life span and darkening the image.

???Locations near fire alarms.

???Locations with an ambient temperature above 40 ??C/104 ??F.

???Locations where the altitudes are higher than 10000 feet.

???Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It

vi

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

???Do not keep using this product to break or drop it. In this case contact your dealer for inspection.

???Do not face the projector lens to the sun. It can lead to fire.

???When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power.

???Do not turn off the main power abruptly or unplug the projector during operation. It can lead to lamp breakage, fire, electric shock or other trouble. The best way is to wait for the fan to turn off before turning main power off.

???Do not touch air outlet grille and bottom plate which becomes hot.

???Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust.

???Do not look into the air outlet grille when projector is operating. It may hurt your eyes.

???Always open the lens shutter or remove the lens cap when the projector is on.

???Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.

???The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

???Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions.

???Never replace the lamp assembly or any electronic components unless the projector is unplugged.

???The product will detect the life of the lamp itself. Please be sure to change the lamp when is showing warning message.

???When changing the lamp, please allow unit to cool down, and follow all changing instructions.

???Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module.

???Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

???Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage.

???This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

vii

Operating environment for using wireless function (Optional)

Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G.

Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally, and it and its antenna are positioned at least 1.5 centimeters (5/8 inches) away from your body. It should not contain metal and you should position the device the above- stated distance from your body.

To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available.

Ensure that the above separation distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions.

Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:

???Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker.

???Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it.

viii

Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.

Caution for Listening

To protect your hearing, follow these instructions.

???Increase the volume gradually until you can hear clearly and comfortably.

???Do not increase the volume level after your ears have adjusted.

???Do not listen to music at high volumes for extended periods.

???Do not increase the volume to block out noisy surroundings.

???Decrease the volume if you can't hear people speaking near you.

ix

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/

Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

???Lamp(s) contain Mercury, Dispose Properly.???

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

x

First thing first

Usage Notes

Do:

???Turn off the product before cleaning.

???Use a soft cloth moistened with mild detergent to clean the display housing.

???Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Don't:

???Block the slots and openings on the unit provided for ventilation.

???Use abrasive cleaners, waxes or solvents to clean the unit.

???Use under the following conditions:

???In extremely hot, cold or humid environments.

???In areas susceptible to excessive dust and dirt.

???Near any appliance that generates a strong magnetic field.

???Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

???Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

???To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

???Please do not open or disassemble the product as this may cause electric shock.

???When changing the lamp, please allow unit to cool down, and follow all changing instructions.

???This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.

???Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module.

???When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.

???Turn on the projector first and then the signal sources.

???Do not use lens cap when projector is in operation.

???When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

x x

1

1

2

3

3

4

6

6

7

8

9

9

10

12

14

14

15

16

17

18

21

23

23

24

24

1

Introduction

Product Features

This product is a single-chip DLP?? projector. Outstanding features include:

???DLP?? technology

???Native 1280 x 720 720p resolution

4:3 / 16:9 / L.Box aspect ratio supported

???Acer ColorBoost technology delivers nature's true colors for vivid, life-like images

???High brightness and contrast ratio

???Versatile display modes (Bright, Standard, Movie, Dark Cinema, Game, Sports, User) for optimum performance in any situation

???NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported

???Lower power consumption and economy (ECO) mode extends lamp life

???Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement.

???Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, ePower Management) for easy adjustment of settings

???Advanced digital keystone correction optimizes presentations

???Multi-language onscreen display (OSD) menus

???Manual focus projection lens zooms up to 1.1X

???2X digital zoom and pan move function

???Microsoft?? Windows?? 2000, XP, Vista??, Macintosh?? OS compliant

English

English

2

Package Overview

This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing.

XXXXXX 3V

Carrying case

3

Projector Overview

Projector Outlook

Front / upper side

Rear side

3 4 5 6 7 8 9

RS232

English

English

4

Remote Control and Control Panel Layout

???Confirm your selection of items.

5

Note:

Remote Control Placement

Please refer to the illustration to attach the remote control to the projector.

English

English

6

Getting Started

Connecting the Projector

VGA

DVD player

RS232 D-Sub

HDMI

DVD player,

Set-top Box,

HDTV receiver

R B G

RS232

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

7

Turning the Projector On/Off

Turning on the Projector

1Remove the lens cap.(Illustration #1)

2Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red.

3Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. (Illustration #2)

4Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.

???If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected.

???If the screen displays "No Signal", please make sure the signal cables are securely connected.

???If you connect to multiple sources at the same time, use the "Source" button on the remote control to switch between inputs.

2

Power button

1

English

Lens cap

English

8

Turning off the Projector

1To turn off the projector, press the "Power" button twice. The message below will display onscreen for 5 seconds.

"Please press power button again to complete the shutdown process."

2Immediately after powering off, the Power indicator LED will flash RED rapidly and the fan(s) will continue to operate for about 120 seconds. This is to ensure that the system cools correctly.

3Once the system has finished cooling, the Power indicator LED will turn solid RED which means projector enter standby mode.

4It is now safe to unplug the power cord.

Warning: Do not turn on the projector immediately after powering off.

Note: If you wish to turn the projector back on, you must wait for 60 seconds at least to press the "Power" button to restart the projector.

Warning indicators:

???If the projector automatically shuts down and the Power indicator quick flashing RED and steady BLUE by returns, please contact your local reseller or service center.

???If the projector automatically shuts down and the Power indicator quick flashing RED and steady BLUE by returns, this indicates that the projector has overheated. The message below will display onscreen if this is about to happen:

"Projector Overheated. Lamp will automatically turn off soon."

???If the Power indicator quick flashing RED and steady BLUE by returns and the message below is displayed onscreen, please contact your local dealer or service center:

"Fan fail. Lamp will automatically turn off soon."

9

Adjusting the Projected Image

Adjusting the Height of Projected Image

The projector is equipped with elevator feet for adjusting the height of image.

To raise/lower the image:

1 Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle.

English

1

Tilt adjusting wheel

English

10

How to optimize image size and distance

Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 80" and 87".

Note: Remind as below figure, the space of 122 cm height is required when located at 3m distance.

Height: 122cm

Form base to

top of image Height:

112cm

C

A

3m

Desired Distance

Figure: Fixed distance with different zoom and screen size.

11

Zoom Ratio: 1.1x

English

12

How to get a preferred image size by adjusting distance and zoom

A

50"

Desired image size

D

Height

Form base to top of image

The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom level accordingly.

13

Zoom Ratio: 1.1x

English

14

User Controls

Installation menu

The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen.

The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more .

1Turn on the projector by pressing "Power" button on the control pad.

2Press the "MENU" button on the control pad to launch the OSD for projector installation and maintenance.

3The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more .

4The Installation menu includes the following options:

???Projection method

???Projection location

???Menu location

???Keystone settings

???Language settings

???Reset to factory default function

Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu.

5Push the menu button anytime to exit the menu and return to the Acer welcome screen.

15

Acer Empowering Technology

English

English

16

Onscreen Display (OSD) Menus

The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings.

Using the OSD menus

???To open the OSD menu, press "MENU" on the remote control.

???When the OSD is displayed, use the keys to select any item in the

main menu. After selecting the desired main menu item, press to enter submenu for feature setting.

???Use the keys to select the desired item and adjust the settings by using the keys.

???Select the next item to be adjusted in the submenu and adjust as described above.

???Press "MENU" on the remote control, the screen will return to the main menu.

???To exit OSD, press "MENU" on the remote control again. The OSD menu will close and the projector will automatically save the new settings.

Main menu

Setting

Sub menu

Color

17

English

English

18

Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode.

Image

Projection mode

??? Front: The factory default setting.

???Rear: Reverses the image so you can project from behind a translucent screen.

Projection Location

??? Auto: Automatically adjusts projection location of image.

??? Desktop

???Ceiling: Turns the image upside down for ceiling-mounted projection.

19

English

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under DVI or Video mode.

20

English

Note: "Sharpness" functions is not supported under DVI and Computer mode.

Note: While using NVIDIA 3D Vison, please download and install latest NVIDIA 3D VISION driver from NVIDIA web site for your graphic card to support this projector.

Note: It needs correct settings on graphic card 3D application program for correct 3D display.

Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below,

-NVIDIA Stereoscopic 3D Video Player: http://www.nvidia.com/object/3D_Drivers_Downloads.html

-Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx

-DDD TriDef Media Player (Trial):

http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html Note: "3D Sync L/R" is only available when 3D is enabled.

Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose.

Setting

21

English

22

English

Reset

User password

???Press to setup or change the "User Password".

???Press number keys to set your password on the remote control and press "MENU" to confirm.

???Press to delete character.

???Enter the password when you see "Confirm Password" displayed.

???The password should be between 4 and 8 characters long.

???If you select "Request password only after plugging power cord", the projector will prompt the user to enter the password every time the power cord is plugged.

???If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on.

Administrator Password

The "Administrator Password" can be used in both the "Enter Administrator Password" and "Enter Password" dialog boxes.

???Press to change the "Administrator Password".

???The factory default of "Administrator Password" is "1234".

If you forgot your administrator password, do the following to retrieve the administrator password:

???An unique 6-digit "Universal Password" which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is.

???If losing this security card and number, please contact with an Acer service center.

???Press the button and choose "Yes" to return the parameters on all menus to the factory default settings.

Management

23

English

Audio

???Press to increase the volume.

English

24

Timer

Language

25

Appendices

Troubleshooting

If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center.

Image Problems and Solutions

English

26

27

English

English

28

OSD Messages

Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used.

Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon.

29

LED & Alarm Definition Listing

LED Messages

English

English

30

Replacing the Lamp

Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.

The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp.

Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp.

1

2

4

To Change the Lamp

3

1Turn off the projector by pressing the Power button.

2Allow the projector at least 30 mins to cool down.

3Disconnect the power cord.

4Use a screwdriver to remove the screw from the cover. (Illustration #1)

5Push up and remove the cover.

6Remove the two screws that secure the lamp module (Illustration #2) and pull up the lamp bar.(Illustration #3)

7Pull out the lamp module by force. (Illustration #4)

To replace the lamp module, reverse the previous step.

Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

31

Ceiling Mount Installation

If you wish to install the projector using a ceiling mount, please refer to the steps below:

1Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base.

Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling.

2 Secure the ceiling rod using the appropriate type of four-cylinder screws.

Ceiling Mount Base

- Attach to ceiling

English

Medium Rod

English

32

3Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket.

Screw Type B

Smaller Washer

Large Washer

Projector Bracket

Supports projector and allows - for adjustments

Spacer

- For heat dissipation

Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary.

4 Attach the ceiling bracket to the ceiling rod.

33

5 Adjust the angle and positioning as necessary.

Tightening Screw

Allen Key

3

Allen Key

Tightening Screw

Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack.

SCREW SPEC. M3 x 25 mm

82.30 mm

English

English

34

Specifications

The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications.

???VGA cable x1

???Composite video cable x1

???Remote control x1

???Battery x1 (for remote control)

???User's guide (CD-ROM) x1

???Quick start guide x1

???Security card x1

???Carrying case x1

*Design and specifications are subject to change without notice.

35

English

English

36

Compatibility modes

A. VGA Analog

1 VGA Analog - PC Signal

37

2 VGA Analog - Extended Wide timing

3 VGA Analog -Component Signal

B. HDMI Digital

(1) HDMI - PC Signal(same as DVI)

English

38

(3) HDMI - Video Signal

English

40

Regulations and safety notices

FCC notice

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the device and receiver.

???Connect the device into an outlet on a circuit different from that to which the receiver is connected.

???Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

41

Remarque ?? l'intention des utilisateurs canadiens

Cet appareil num??rique de la classe B est conforme a la norme NMB-003 du Canada.

Canada ??? Low-power license-exempt radio communication devices (RSS-210)

aCommon information

Operation is subject to the following two conditions:

1.This device may not cause interference, and

2.This device must accept any interference, including interference that may cause undesired operation of the device.

bOperation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing.

Declaration of Conformity for EU countries

Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Compliant with Russian regulatory certification

Radio device regulatory notice

Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). The below information is for products with such devices.

English

English

42

European Union (EU)

R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:

???Article 3.1(a) Health and Safety

???EN60950-1:2001 + A11:2004

???EN50371:2002

???Article 3.1(b) EMC

???EN301 489-1 V1.6.1

???EN301 489-3 V1.4.1 (Applicable to non-bluetooth wireless keyboard mouse set)

???EN301 489-17 V1.2.1

???Article 3.2 Spectrum Usages

???EN300 440-2 V1.1.2 (Applicable to non-bluetooth wireless keyboard mouse set)

???EN300 328 V1.7.1

???EN301 893 V1.4.1 (Applicable to 5GHz high performance RLAN)

List of applicable countries

EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use.

Acer America Corporation

333 West San Carlos St., San Jose

CA 95110, U. S. A.

Tel : 254-298-4000

Fax : 254-298-4147

www.acer.com

Federal Communications Commission

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The following local Manufacturer / Importer is responsible for this declaration:

Acer Incorporated

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih

Taipei Hsien 221, Taiwan

Declaration of Conformity

We,

Acer Incorporated

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan

Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw

And,

Acer Europe SA

Via Cantonale, Centro Galleria 2 6928 Manno Switzerland

Hereby declare that:

Product: Projector

Trade Name: Acer

Model Number: H7P0901

Machine Type: H5360 series

Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.

EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:

-. EN55022, AS/NZS CISPR22, Class B

-. EN55024

-. EN61000-3-2 Class A

-. EN61000-3-3

Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard:

-. EN60950-1: 2001 + A11: 2004

RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment

-. The maximum concentration values of the restricted substances by weight in homogenous material are:

Directive 2005/32/EC of the European Parliament and of the Council with regard to Eco-design Requirements.

The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse.

R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:

zArticle 3.1(a) Health and Safety

-. EN60950-1 -. EN62311

zArticle 3.1(b) EMC

-. EN301 489-1 -. EN301 489-17

zArticle 3.2 Spectrum Usages

-. EN300 328

-. EN301 893 (Applicable to 5GHz high performance RLAN).

Year to begin affixing CE marking 2009.

Regulation Center, Acer Inc.