l l

l l

l l l l

1. DO NOT allow children to use or play with any part of the cooktop, or leave them unattended near it. They could be burned or injured.

2.DO NOT store things children might want above the cooktop. Children could be burned or injured while climbing on it.

3.DO NOT allow anyone to touch hot surface units. Dark colored units can still be hot enough to burn severely.

4.KEEP children away from the cooktop when it is on. The cook- top and surrounding area can get hot enough to cause burns.

5.DO NOT use the cooktop to heat a room. Persons in the room could be burned or injured or a fire could start.

6. KEEP pan handles turned in, but not over another surface unit to avoid burns, injury and to prevent the utensil from being pushed

off the cooktop.

7.DO NOT use water on grease

fires. The fire will spread. Cover fire with large lid or smother with baking soda or salt.

8.DO NOT wear loose or hanging garments when using the cooktop. They could ignite if they touch a hot surface unit and you could be burned.

9.DO NOT heat unopened con- tainers. They could explode. The hot contents could burn you and container particles could cause injury

10.MAKE SURE control knobs are in the off position when you are finished cooking or when you are not watching to prevent burns.

,If you need service, or call with a question, have this information ready:

1.Complete Model and Serial Numbers (from the plate located as shown).

2.Purchase date from sales slip.

Model Number

Serial Number

Copy thls Information in these spaces. Keep this book, your warranty and sales slip together in a handy place.

Purchase Date

Servloe Company Phone Number

L LEFT REAR

I CONTROL KNOB

I RIGHT REAR

I CONTROL KNOB

Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.

I LEFT FRONT

F CONTROL PANEL

Sutface Unit Indicators

The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.

-I RIGHT FRONT

/CONTROL PANEL

I SURFACE UNIT

- INDICATOR

I

r SIGNAL LIGHT

Signal light

Thesignal light will glow when a surface unit is on. NOTE: When the light goes off the surface unit will still be hot. Do not leave or store plastic, pans or other Items on surface units.

3. IMPORTANT: After cleaning,

apply a thin coat of salt-free oil to the CCCL surface units, then heat 3-5 minutes. DO NOT leave ele- ments unattended while ON. Oil may smoke slightly when heated. If surface units have dark spots caused by grease and food, the oil treatment will improve their ap- pearance but not eliminate the

spots. NOTE: Optional Eiectroi dressing can be applied to the surtace units to improve their appearance.

2.For best results, wipe off surface units with a damp soft cloth and soapy water after each use. Burned-on food may be removed with a soapy scouring pad. The red spot in the center of the sur- face unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

4.The stainless steel trim rings will gradually yellow from the heat

of the surface units and pans. This is normal. The yellowing can be removed by using stainless steel cleaner or Cook Top Polishing Creme on the trim rings.

To obtain order information for Cook Top Polishing Creme (PN 814009) or Electrol dressing (PN 814030), write to:

Whirlpool Corporation

Attention: Customer Service Dept. 1900 Whirlpool Drive

LaPone, IN 46350s

PART

Control knobs

Control panel

WHAT TO USE

Warm, soapy water and soH cloth.

Warm, soapy water or spray glass cleaner.

HOW TO CLEAN

l Wash, rinse and dry well.

l Do not soak.

9 Wash, rinse and dry well.

. Follow directions provided with cleaner.

Black-glass cooktop

Surface unlts (Solid elements)

SoHcloth ans warm, soapy water.

Nylon or plastic scouring pad for stubborn spots.

SoH cloth and warm, soapy water.

Soapy scouring pad or scouring powder.

. Wipe off regularly when cooktop is cool.

. Do not use abraslve or harsh cleansers.

l Make sure the cooktop and the surface units are cool.

lWipe off the surface unit aHer each use.

9 Use wet soapy scouring pad on hard to remove spots. Rinse Well.

To darken surface unlts

SoH cloth and salt-free oil.

???Electrol dressing, (PN 814030).

After each cleaning, heat surface unit until dry

or to remove rust spots:

l Make sure surface units are cool.

9 AHer each cleaning, apply thin coat of oil to surface units, then heat for 3-5 minutes. Slight smoking of oil will occur.

l Follow the directions on the dressing.

NOTE: This will Improve surface unlt appearance, but not ellmlnate dark spots.

(Trlm rlngs)

*Non-abrasive stainless steel cleaner or Cook Top Polishing Creme, (PN 814009).

NOTE: Yellowlng of trlm of the surface units and

l Make sure surface units are cool.

l Follow directions provided with cleaner or polishing creme.

rlngs Is normal from heat pans.

1. Before calling for

assistance...

Performance problems often result from little things you can find and fix yourself without tools of any kind.

if nothing operates:

l Is the cooktop wired correctly to a live circuit with the proper voltage? (See ???Installation Instructions:???)

l Have you checked your home???s main fuses or circuit breaker box?

if surface units will not operate or seem to cook too slow:

l Have you checked your home???s main fuses or circuit breaker box?

l Is the surface unit control knob turned to a setting other than OFF?

l Are you using the proper cook- ware? See page 6.

l Do the control knobs turn?

if surface unit control knob(s) will not turn:

l Did you push in before trying to turn?

if cooking results aren???t what you expected:

l Is the cooktop level?

l Are the pans the size called for in the recipe?

l Are you following a tested recipe from a reliable source?

l Do the cooking utensils have smooth, flat bottoms and fit the sur- face unit being used?

l Are you allowing time for a longer warm-up and cool-down?

See the Cooklng Guide for more infor- mation on cooking problems and how to solve them.

2.If you need assistance%.

Call Whirlpool COOL-LINE@ serv- ice assistance telephone number. Dial free from anywhere in the U.S.:

I-SOO-25313Ol

and talk with one of our trained Con- sultants. The Consultants can instruct you in how to obtain satisfactory oper- ation from your appliance or, if serv- ice is necessary, recommend a qualified service company in your area.

3. If you need service?..

Whirlpool has a nationwide net- work of franchised TECH-CARE@ Serv- ice Companies. TECH-CARE service

technicians are trained to fulfill the product warranty and provide after- warranty service, anywhere in the United States. To locate TECH-CARE service in your area, call our COOL- LINE service assistance telephone number (see Step 2) or look in your telephone directory Yellow Pages under:

LENGTH OF WARRANTY

FULL ONE-YEAR

WARRANTY

From Date of Purchase

WHIRLPOOL WILL PAY FOR

Replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a franchised TECH-CARE@ service company.