VENTILATION
Built-In Island/Classic Chimney Island Hood
Standard Features & Accessories
All models include
???Must also purchase interior or exterior ventilator kit, sold separately (see
Installation Notes & Accessories for recommended Viking ventilator products
???30???D.
???Heat sensor turns the ventilator on full power when cooking temperatures reach uncomfortable levels
???Variable speed controls for custom venting???separate on/off switch allows you to leave ventilator at favorite/most-used setting
???Heavy-duty construction; professional- type size, design, and styling
o Virtually seamless stainless steel design with no visible screws
???Easy cleanup
o Design of low-profile filter system means less interior hood space to be cleaned
o Canopy interior is completely lined in stainless steel for increased rigidity, seamless appearance, and easy cleaning
???50-watt halogen lights with dimmer control
o Power switch and dimmer control are separate, allowing you to leave dimmer at favorite position
o See Dimensions & Specifications table for number of lights per model
Professional models include
???18"H.
???Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercial- type products
???See Dimensions & Specifications table for number of filters per model
???Removable trough catches liquefied grease
???Adjustable duct cover (for 8 ??? 9??? ceilings) is standard (see Dimensions & Specifications table)
Designer models include
???14"H.
???12-hour timer built into ventilator controls
???Dishwasher-safe, stainless steel mesh filters efficiently remove grease and heated vapors from the air, and are easily removed for quick cleaning
(frame and mesh are stainless steel); especially designed for use with commercial-type products
???See Dimensions & Specifications table for number of filters per model
???Delay feature allows you to set the ventilator to shut off on its own from 10 ??? 30 minutes later
???Duct cover must be ordered separately (see Installation Notes & Accessories)???covers available for installations with 8???, 9???, or 10'??? ceilings
Model numbers
VIH ISLAND HOODS
???VIH3608???36"W.
???VIH4208???42"W.
???VIH5408???54"W.
???VIH6608???66"W.
VCIH CLASSIC CHIMNEY ISLAND HOODS
???VCIH3608???36"W.
???VCIH4208???42"W.
???VCIH5408???54"W.
???VCIH6608???66"W.
DCIH CLASSIC CHIMNEY ISLAND HOODS
???DCIH3604???36"W.
???DCIH4204???42"W.
???DCIH5404???54"W.
VIH Professional
Island Hood*
FINISH DETAILS FOR VIH/VCIH MODELS
???Stainless Steel (SS), Black (BK), White (WH), Metallic Silver (MS), Graphite Gray (GG), Stone Gray (SG), Taupe (TP), Biscuit (BT), Cotton White (CW), Oyster Gray (OG), Golden Mist (GM), Lemonade (LE), Sage (SA), Mint Julep (MJ), Sea Glass (SE), Iridescent Blue (IB), Viking Blue (VB), Pumpkin (PM), Racing Red (RR), Apple Red (AR), Burgundy (BU), Plum (PL), Chocolate (CH), and Cobalt Blue (CB).
???Finish designates front, back, and sides.
VCIH Professional Classic
Chimney Island Hood*
EXTRA FINISH DETAILS FOR VIH/VCIH MODELS
???Accessory Rail Option???front/back or front/back/sides (must be ordered factory installed)
o Stainless Steel/Chrome (CR)???Stainless steel rail with chrome supports/brackets and hooks (included)
???CR2???front/back
???CR4???front/back/sides
o Brass Trim Option (BR)???nameplate, rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use.
???BR2???front/back
???BR4???front/back/sides
DCIH Designer Chimney
Island Hood**
EXTRA FINISH DETAILS FOR DCIH MODELS
???Accessory Rail Option???around entire hood (must be ordered factory installed) o Stainless Steel/Chrome (CR4)???
Stainless steel rail with chrome supports/brackets and hooks (included)
o Brass Trim Option (BR4)???rail, supports/brackets, and hooks (included). Brass components have a durable protective coating for maintenance-free normal use.
*Shown throughout with duct cover, included.
**Shown throughout with duct cover, sold separately (see Installation Notes & Accessories).
ORDERING INSTRUCTIONS
First specify model number, followed by color code (VIH3608SS). If ordering optional decorative rail(s), specify code at end (VIH3608SSCR).
VENTILATION
Built-In Island/Classic Chimney Island Hood
Dimensions & Specifications
CLEARANCE DIMENSIONS
DESIGNER CHIMNEY
ISLAND HOOD
VENTILATION
Built-In Island/Classic Chimney Island Hood
Installation Requirements
Proper installation/ducting is extremely important to ensure maximum performance. Use a qualified and trained installer.
DUCTING
???Check with a qualified and trained installer or local codes for makeup air requirements, if any.
???Max. duct run
o For 300 ??? 1,200 CFM???50??? (152.4 m)
o For 1,500 CFM???75??? (22.9 m) o Duct run length is for general reference only; for longer
duct runs, increase duct size and contact a qualified and trained installer.
o Straight runs and gradual turns are best; for example, each 90?? elbow is equivalent to 5??? ??? 10??? (1.52 ??? 3.05 cm) of straight run.
???7??? (17.8 cm) round duct for 300 ??? 600 CFM; 10??? for 900 ??? 1500 CFM
o Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance.
GAS
Not applicable
ELECTRICAL
???Hardwire direct with two-wire with ground
???120 VAC/60 Hz
???Max. amp usage (rating includes rec. ventilator kit rating)
PLUMBING
Not applicable
Note: All CFMs are based on tests with 0.1 static pressure. Without applying static pressure (some brands do not), CFM could be greatly overstated.
*A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.
**It is recommended that the 1,500 CFM ventilator be used with longer duct runs.
Note: Maximum amp rating for hoods includes recommended ventilator kit rating. All products must be hard wired with two-wire ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18???H. hoods.
VENTILATION
Built-In Island/Classic Chimney Island Hood
??? Installation Notes & Accessories
Ventilator Kits
???See Installation Requirements table for recommendations for each hood model
???One ventilator, one duct run for any size hood/ventilator
???A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilator should be used over ranges/rangetops with gas grill
???Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty
VENTILATION
Built-In Island/Classic Chimney Island Hood
??? Installation Notes & Accessories
Duct Covers
???12???D.
???DCI for VIH models
o Extend height of hood by 12???; conceal duct
???VCCI for VCIH models
o For 8???, 9???, or 10??? ceilings
???DCCI for DCIH models
o For 8???, 9???, or 10??? ceilings
???Professional covers (DCI & VCCI) available in Stainless Steel (SS), Black (BK), White (WH), Almond (AL), Biscuit (BT), Stone Gray (SG), Graphite Gray (GG), Burgundy (BU), Lemonade (LE), Mint Julep (MJ), Forest Green (FG), Viking Blue (VB), Cobalt Blue (CB), and Eggplant (EP).
???Designer covers (DCCI) available in Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG).
???When ordering, specify finish code following accessory model number (for example, DCI36-SS)
Compliance Information
WARRANTY SUMMARY*
???One-year full warranty???complete product
???Five-year limited warranty???all ventilator motors
???Ninety-day limited warranty???cosmetic parts such as glass, painted, and decorative items
*Must use Viking ventilator kits with Viking hoods; use of non-Viking kits voids product warranty. For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada.
