2 - English

Important Safety Instructions

?????? Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

?????? Do not use this product while driving.

?????? Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to flames or dispose of it in a fire: the battery may explode. Check with local authorities for possible battery disposal instructions.

?????? Do not disassemble, modify, or attempt to repair any component of this product.

?????? Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions require.

SAVE THESE INSTRUCTIONS!

BTS150 HIGH-DEFINITION SPEAKER

Uniden???s BTS150 high-definition Bluetooth speaker provides clear stereo sound in a compact, portable package. With Bluetooth V2.0 compatibility, the BTS150 pairs with your cell phone to become a speakerphone for hands free conversations. You can also connect your music player (wired or wireless) for crisp, clear audio.

English - 3

?????? Bluetooth V2.0.

?????? Up to 2 Bluetooth devices can be paired with your speaker.

?????? Supporting A2DP/AVRCP/HFP/HSP profiles.

?????? Portable

?????? Up to 5 hours of play from a fully-charged battery.

?????? Up to 33 ft (10 m).

?????? Call Waiting feature

The BTS150 speaker is not a data storage device; do not attempt to copy files to it.

What???s Included

?????? BTS150 Speaker

?????? AC Adapter (ZDA050100US) with USB cable.

SET UP YOUR BTS150 SPEAKER

Charge the Battery

1.Slide the main power switch to the ON position (see page 8).

2.Insert the adapter???s mini USB connection into your speaker???s USB slot (see page 8).

3.Plug the adapter into your computer.

4 - English

4.The LEDs flash blue while the battery is charging (charge time = 7.5 hours on a completely empty battery). The LEDs turn solid blue when the battery is fully charged.

Your battery must be fully charged before you can use your speaker.

Turn on Your Speaker

When you turn on your speaker for the first time, it automatically goes into pairing mode. The LEDs rapidly flash red and blue while in pairing mode. After you pair Bluetooth devices to your speaker, the next time you turn it on it searches for these paired devices and then moves into a standby state.

1.Slide the main power switch to the ON position.

2.Press and hold for at least 3 seconds. A ???power on??? tone sounds.

3.The LEDs flashes blue and red slowly while looking for Bluetooth devices. It remains steady on (blue) when Bluetooth devices are discovered; otherwise, it keeps flashing.

Pair Bluetooth Devices to Your Speaker

Make sure your speaker has been fully charged and is in pairing mode.

Pair First Bluetooth Device

Pair your first Bluetooth device to your speaker when you turn your speaker on for the first time. Be sure your speaker is in pairing mode (see page 6).

1. Select a Bluetooth V2.0 device (mobile phone or music player) to pair.

English - 5

2.Select the Searching mode on your Bluetooth device (refer to your Bluetooth device???s owner???s manual for details if necessary).

3.Your Bluetooth device should find BTS150; select it and use 0000 for a pairing code if necessary.

4.Verify that you are connected to your speaker. The Bluetooth LED moves to a steady ON state when pairing is complete.

Pair Second Bluetooth Device

When you want to pair the second Bluetooth device:

1.Turn on your speaker.

2.Press and hold until your speaker beeps twice.

3.Release . The BTS150 is ready to pair.

4.Follow the same procedures for pairing your first Bluetooth device (see page 5).

6 - English

GETTING TO KNOW THE BTS150 SPEAKER

BTS150 Top

English - 7

NOTE: This key can also turn your BTS150 speaker on and off.

BTS150 Back

8 - English

LEDs

Two LEDs on the front of your speaker provide visual cues to different processes.

English - 9

BTS150 SPEAKER OPERATION

When you want to turn on your speaker, remember to slide the main power switch to the ON position.

Press and hold for at least 3 seconds.

music playback. Press and release the keys to increase or decrease the volume level one

Your speaker sounds an alert tone when it reaches the maximum upper and lower volume levels.

Basic Cell Phone Operations

When you have an incoming call, the speaker sounds an incoming call tone and the LEDs flash blue. Both the speaker and your cellphone may ring, depending on your cellphone settings.

10 - English

Call Waiting

You can receive call waiting notification when your cellphone is paired to your speaker. The LED flashes and your speaker sounds an alert tone.

Your cellphone must subscribe to Call Waiting service to use these features; contact your telephone provider for more information.

English - 11

Basic Music Operation

When you pair a Bluetooth music player to your speaker, you can control operation through your speaker.

12 - English

SPECIAL FEATURES

Play Music through a Wired Connection

You can still play music through your BTS150 speaker even if your music device is not paired to your speaker. You can physically connect your music device to your speaker with a 3.5 mm minijack cable (not included).

1.Plug one end of the cable into your music device, just like you would a pair of headphones.

2.Plug the other end of the cable into your speaker???s 3.5 mm jack labeled Audio In.

3.Use your music device to start and control music playback and volume through your speaker.

English - 13

The following restrictions apply when you are playing music through a wired connection:

?????? If both a Bluetooth device and a wired device are connected to your speaker, the Bluetooth device will take priority over the wired device.

?????? The BTS150 does not control the wired device; it only plays music through a wired connection.

TROUBLESHOOTING

14 - English

English - 15

SPECIFICATIONS

?????? Total 4W output (2W / Channel)

?????? Full-range (35 mm) driver / Channel + Passive Radiator

?????? Li-Ion Batt: 1180mAh

?????? Playtime: Up to 5 hours in 80% Volume

?????? Recharging Time: 7.5 hours

?????? Range: Class 2, 10 m

Compatibility

?????? Bluetooth 2.0 or above device with A2DP/AVRCP/ HFP / HSP

16 - English

Safety and Handling Information

For maximum product life, do not drop, throw, or crush the speaker. Do not expose it to humidity, dust, or temperatures above 125 F.

FCC Notice

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this product.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user???s authority to operate this device.

English - 17

To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC???s exposure criteria. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.

Industry Canada statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual.

Lithium-Ion battery information

This device contains a non-removable lithium-ion battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.

One-Year Limited Warranty

Evidence of original purchase is required for warranty service.

WARRANTOR: UNIDEN AMERICA CORPORATION (???Uniden???)

ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.

18 - English

WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is a) damaged or not maintained as reasonable or necessary, b) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, c) improperly installed, d) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, e) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or f) installed or programmed by anyone other than as detailed by the owner???s manual for this product.

STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit.

THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN

LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING

BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.

LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada.

English - 19

PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner???s manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:

Uniden America Service

4700 Amon Carter Blvd. Fort Worth, TX 76155

20 - English