Firmware Update Information for Owners of Toshiba HD DVD Players: Models HD-E1, HD-XE1 and HD-EP10.
Firmware Update Version: 2.7
Applicable Models: HD-E1, HD-XE1 and HD-EP10
Overview:
As part of our commitment to provide world-class service to our customers, Toshiba is supplying this firmware update for use by purchasers of the applicable models of Toshiba HD DVD Player. This firmware update covers the following items.
-High Bit Rate Audio functionality ( for HD-XE1)
-Improves support for 1080p/24Hz OUTPUT (for HD-XE1 and HD-EP10)
-Additional OSD languages, improved network connectivity supporting the download of web-enabled network content associated with certain HD DVD discs
-Addresses certain disc playback and HDMI/DVI related issues identified by Toshiba.
Important Note:
Certain HD DVD discs may contain or have the capability of downloading studio-provided, web-enabled network content. To minimize any potential compatibility and/or connectivity issues, before viewing such content, it is recommended that you perform the firmware update process to ensure that your HD DVD player is using the latest firmware version.
How to obtain and install the update:
1. If you have a broadband internet service
You may obtain the firmware update over the internet using the Ethernet port on the back of your HD DVD Player. Instructions for configuring the Ethernet port and downloading the firmware update can be found in the owner's manual and Update Procedure sheet for your HD DVD Player. Set out below is an overview of the process:
- BEFORE BEGINNING THE FIRMWARE UPDATE PROCESS, BE SURE TO REMOVE ANY DISCS
FROM YOUR HD DVD PLAYER.
-Please configure the Ethernet port. You may need to turn on DHCP and DNS.
-After you have configured the Ethernet port, follow the directions in the owner???s manual to check for a firmware update.
-If a firmware update is available for your player, it will take about 30 - 60 minutes to download and install.
When the later version of FW is available for your player, then:
1.A message will appear and the firmware update will automatically start.
2.When the firmware update is completed, the player will automatically turn itself off.
In case of model: HD-XE1:
Please also follow steps 3 through 6
3.Power up the player again.
4.The player will display a message that another update will start.
5.Read the message and press OK. The message will disappear, and the second firmware update will automatically start. Please be patient during this process. (During the update, "VERUP" will flash on the display of the player.)
6.When the firmware update is completed, the player will automatically turn itself off.
-DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the player to be halted and the player may no longer operate properly. If the player stops working, please contact Toshiba Customer Service for your country.
-If no firmware update is available, the player will quickly exit the firmware update process.
-Please refer to the owner's manual and Update Procedure sheet for additional details.
2. If you have a PC with a CD-RW drive that is connected to the internet
You may be able to download an ISO image file of the firmware update to your PC and copy it to a blank CD-R or CD-RW disc. For more information, and to download an ISO image file of the firmware update "click here" (English Language Site).
3. If you are unable, or prefer not to obtain the firmware update by one of the methods described above
You may contact Toshiba Customer Service for your country and request that a firmware update disc be sent to you by mail.
-You can update the firmware using this update disc by following the instructions provided with the disc.
-DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the player to be halted and the player may no longer operate properly. If the player stops working, please contact Toshiba Customer Service for your country.
Please note, Toshiba???s terms and conditions that applied to your acquisition, ownership, possession and use of the HD DVD player will apply (with the appropriate changes) to the firmware updates. By uploading the firmware updates to your HD DVD player, you expressly agree to the same.
Frequently Asked Questions:
Q1. What does this update do?
A1. This firmware update covers the following items.
-Support for 1080p/24Hz output to the HD-XE1 and HD-EP10 player.
-Additional on-screen language display options, improved network connectivity for supporting the download of web- enabled network content associated with certain HD DVD discs
-and also addresses certain disc playback and HDMI/DVI related issues identified by Toshiba.
Q2. Why do I need to turn on DHCP and DNS?
A2. Turning on DHCP causes the player to automatically detect its IP address and other network information from your internet service provider's DHCP server. Turning on DNS causes the player to automatically detect the DNS server address associated with your internet service provider.
Q3. I purchased an HD DVD disc that contains/has the capability of downloading web-enabled network content. What do I need to do to view this content?
A3. First, be sure that you have properly configured the player's Ethernet port. If your Ethernet port is properly configured, perform the firmware update process to update the player's firmware to the latest firmware version. Once you have updated the player with the latest firmware, follow the directions that came with the HD DVD disc or that appear in the menu of the HD DVD disc. Should you experience problems viewing such content, please contact Toshiba Customer Service for your country.
Q4. When I connect my HD DVD Player to my HDTV or HD Monitor using a HDMI to DVI adaptor cable or a HDMI to DVI adaptor, the output resolution of the player remains fixed at 480i. Does the new firmware address this issue?
A4. This firmware update addresses the issue. Should you continue to experience problems, please contact Toshiba Customer Service for your country.
Q5. The HDMI output does not work or works intermittently with the HDMI or DVI input on my HDTV or monitor. Does the new firmware address that issue?
A5. The firmware update addresses and improves HDMI and DVI connectivity issues. If you still experience such issues, try disconnecting and reconnecting the HDMI cable. Make sure your display input is set to HDMI (or DVI). If your display has more than one HDMI/DVI input, make sure that all connected HDMI/DVI source devices are powered on (even if not in use). If none of these solve the issue, please turn off the TV and the HD DVD player. Check all connections. Disconnect and reconnect the HDMI cable. Turn on the TV first and then turn on the HD DVD player. Should you continue to experience issues, please contact Toshiba Customer Service for your country.
Q6. During HD DVD playback I sometimes experience pixelization, block noise or audio dropouts. Sometimes playback freezes or stops. Sometimes, playback is not smooth. Does the new firmware address these issues?
A6. This firmware update addresses various playability issues. You should also check to be sure that the disc is clean and, if the disc will not operate at all, that you are inserting the disc with the right side up. In the event that playback freezes or stops, press and hold the ON/STANDBY button on the front of the HD DVD player for approximately ten seconds. This will cause the HD DVD player to turn off. After the player turns off, turn the HD DVD player back on by pressing the ON/STANDBY button, and then press the OPEN/CLOSE button to remove the disc. Should you continue to experience issues, please contact Toshiba Customer Service for your country.
Q7. Do I need to install prior firmware updates before installing the current firmware update?
A7. No. The current firmware update includes all of the prior firmware updates.
