TOSHIBA AMERICA INFORMATION SYSTEMS

STORAGE DEVICE DIVISION

IRVINE, CALIFORNIA

MK6006GAH (HDD1544) 1.8-INCH HARD DISK DRIVE

USER MANUAL

INTRODUCTION ??? MK6006GAH (HDD1544) HARD DISK DRIVE

General Features

???1.8" sized drive

???2 Platter

???60 Gigabytes

???8mm High

???15ms Average Seek Time

???ATA-6 Interface

???Ultra DMA 100

???2MB Buffer

???Rotational speed of 4,200rpm

???MTTF 300,000 Hours

1

SETUP ??? MK6006GAH (HDD1544) HARD DISK DRIVE

Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive.

Figure 1. MK6006GAH Side View

Installation Notes

???Do not apply any force to the top cover, except the screw areas on top cover. Maximum force to the specified area is 2N.

important Note: Disconnect power from your computer system before beginning installation

2

USING THE HARD DISK DRIVE ??? MK6006GAH (HDD1544)

HARD DISK DRIVE

Backing up Data Files

To avoid data loss, regularly back up the data files on the hard disk drive.

3

SPECIFICATIONS ???MK6006GAH (HDD1544) HARD DISK DRIVE

4

Regulatory

The drive satisfies the following standards:

5

DRIVE CONNECTORS ???MK6006GAH (HDD1544) HARD DISK DRIVE

Figure 1. MK6006GAH HDD - INTERFACE CONNECTOR

6

Interface Signals

DRIVE INTERFACE SIGNALS

Note: Symbol () in front of signal indicates negative logic.

7