VAIO?? Computer
Quick Start
VAIO?? Computer
Quick Start
3
4
Notice to Users
?? 2003 Sony Electronics Inc. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any
SONY ELECTRONICS INC. PROVIDES NO
WARRANTY WITH REGARD TO THIS
MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN
AND HEREBY EXPRESSLY DISCLAIMS
ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE WITH
REGARD TO THIS MANUAL, THE
SOFTWARE, OR SUCH OTHER
INFORMATION. IN NO EVENT SHALL
SONY ELECTRONICS INC. BE LIABLE
FOR ANY INCIDENTAL,
CONSEQUENTIAL, OR SPECIAL
DAMAGES, WHETHER BASED ON TORT,
CONTRACT, OR OTHERWISE, ARISING
OUT OF OR IN CONNECTION WITH THIS
MANUAL, THE SOFTWARE, OR OTHER
INFORMATION CONTAINED HEREIN OR
THE USE THEREOF.
Sony Electronics Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.
This product contains software owned by Sony and licensed by third parties. Use of such software is subject to the terms and conditions of license agreements enclosed with this product. Some of the software may not be
transported or used outside the United States. Software specifications are subject to change without notice and may not necessarily be identical to current retail versions.
Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and credit card information. Financial services may require prior arrangements with participating financial institutions.
As an ENERGY
STAR?? Partner, Sony Corporation has determined that this product meets the
ENERGY STAR?? guidelines for energy efficiency.
The International ENERGY STAR?? Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles and copiers. Their standards and logos are uniform among participating nations. ENERGY STAR is a U.S. registered mark.
5
VAIO?? Computer Quick Start
The Wireless LAN functionality*, which is incorporated into selected models only, has passed Wi- Fi certification and complies with the interoperability specifications established by WECA (Wireless Ethernet Compatibility Alliance).
*Selected models may come with a PC Card.
Sony, DVgate Plus, Handycam, i.LINK, Mavica, MagicGate??? Memory Stick, Memory Stick, VAIO, and the VAIO logo are trademarks of Sony Corporation. Microsoft, Windows Media, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation. Intel, SpeedStep, and Pentium are trademarks or registered trademarks of Intel Corporation. PS/2 is a registered trademark of IBM. Acrobat Reader, Photoshop, Photoshop Elements, and Premiere are trademarks of Adobe Systems Incorporated. PowerPanel is a trademark of Phoenix Technologies Ltd.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights owned by Macrovision Corporation. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software applications, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other. Please refer to the documentation that came with your compatible i.LINK device for information on operating conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, confirm their operating system compatibility and required operating conditions. All other trademarks are trademarks of their respective owners.
End User / Product
Activation Requirements
Certain software product(s) included with this computer may include features such as copy protection and content management technology. Use of the software product(s) requires agreement to applicable end user agreements and full compliance with applicable product activation procedures. Product activation procedures and privacy policies will be detailed during initial launch of the software product(s), or upon certain reinstallations of the software product(s) or reconfiguration of the computer, and may be completed by Internet or telephone (toll charges may apply).
Owner???s Record
The model number and serial number are located on the bottom of your Sony VAIO?? computer. Record the model and serial numbers in the space provided here, and keep in a secure location. Refer to the model and serial numbers when you call your Sony Service Center. Model Number: ______________________
Serial Number:________________________
6
Safety Information
WARNING
???To prevent fire or shock hazard, do not expose your computer to rain or moisture.
???To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
???Never install modem or telephone wiring during a lightning storm.
???Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
???Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the network interface.
???Use caution when installing or modifying telephone lines.
???Avoid using the modem during an electrical storm.
???Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.
???A socket outlet should be as close as possible to the unit and easily accessible.
???i.LINK, PC Card, and USB connectors are not supplied with Limited Power Sources.
Notice to Users
.
To change the backup battery, please contact your nearest Sony Service Center.
Caution: The use of optical instruments with this product will increase eye hazard. As the laser beam used in this product is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
(For optical drive) Danger: Visible and invisible laser radiation when open. Avoid direct exposure to beam.
Caution: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
AVERTISSEMENT
???Pour pr??venir tout risque d???incendie ou d?????lectrocution, garder cet appareil ?? l???abri de la pluie et de l???humidit??.
???Pour pr??venir tout risque d?????lectrocution, ne pas ouvrir le ch??ssis de cet appareil et ne confier son entretien qu????? une personne qualifi??e.
???Ne jamais effectuer l???installation de fil modem ou t??l??phone durant un orage ??lectrique.
???Ne jamais effectuer l???installation d???une prise t??l??phonique dans un endroit mouill?? ?? moins que la prise soit con??ue ?? cet effet.
???Ne jamais toucher un fil t??l??phonique ?? d??couvert ou un terminal ?? moins que la ligne t??l??phonique n???ait ??t?? d??branche de l???interface r??seau.
7
VAIO?? Computer Quick Start
???Soyez tr??s prudent lorsque vous installez ou modifiez les lignes t??l??phoniques.
?????vitez d???utiliser le modem durant un orage ??lectrique.
???N'utilisez pas le modem ni le t??l??phone pour pr??venir d'une fuite de gaz quand vous ??tes pr??s de la fuite.
???L???appareil doit ??tre le plus pr??s possible d???une prise murale pour en faciliter l???acc??s.
???Des connecteurs i.LINK, PC Card, et USB ne sont pas fournis avec des Sources d?????nergie Limit??es.
Pour changer la pile de rechange, veuillez contacter votre centre de service Sony le plus pr??s.
Avertissement: L'utilisation d'instruments optiques avec ce produit augmente les risques pour les yeux. Puisque le faisceau laser utilis?? dans ce produit est dommageable pour les yeux, ne tentez pas de d??sassembler le bo??tier.
(Pour le lecteur optique) Danger: Radiation laser visible et invisible si ouvert. ??vitez l???exposition directe au faisceau.
Attention : Afin de r??duire les risques d'incendie, n'utilisez qu'un cordon de communication N0. 26 AWG ou plus gros.
If you have questions about this product, you can write to the Sony Customer Information Service Center at 12451 Gateway Blvd., Ft.
Myers, FL 33913 or find Sony Customer Service on the Web at: http://www.sony.com/pcsupport.
Regulatory Information
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
8
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
???Reorient or relocate the receiving antenna.
???Increase the separation between the equipment and the receiver.
???Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
???Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications to the computer not expressly approved in this manual could void your authority to operate this equipment.
Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits may be attached to this computer product. Operation with non- compliant peripherals is likely to result in interference to radio and television reception.
All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception.
FCC Part 68
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to the telephone company.
Notice to Users
This modem uses the USOC RJ11C telephone jack.
A telephone plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
The REN is used to determine the number of devices which may be connected to the telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact
9
VAIO?? Computer Quick Start
NJ 07656. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Repair of this equipment should be made only by a Sony Service Center or Sony authorized agent. For a Sony Service Center near you, call
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
Use a surge arrestor to protect against electrical surges.
FCC Radio Frequency
Exposure (United States)
(Applies to wireless LAN models only) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 inches (20 cm) between the radiator and body (excluding extremities: hands, wrists, and feet).
This device and its antenna(s) must not be co- located or operating with any other antenna or transmitter. Users are not permitted to modify this transmitter device. Any unauthorized change made to this device could void your authority to operate this device.
IC
(Applies to wireless LAN models only) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The term ???IC:??? before the certification / registration number only signifies that the Industry Canada technical specifications were met.
(S???applique aux mod??les sans fil de LAN seulement) L???utilisation de ce dispositif est autoris??e seulement aux conditions suivantes:
(1) il ne doit pas produire de brouillage et (2) l???utilisateur du dispositif doit ??tre pr??t ?? accepter tout brouillage radio??lectrique re??u, m??me si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
Pour emp??cher que cet appareil cause du brouillage au service faisant l???objet d???une licence, il doit ??tre utilis?? ?? l???interieur et devrait ??tre plac?? loin des fen??tres afin de fournir un ??cran de blindage maximal. Si le mat??riel (ou son antenne d?????mission) est install?? a l???exterieur, il doit faire l???objet d???une licence.
L???expression ???IC:??? avant le num??ro d???homologation / enregistrement signifie seulement que les sp??cifications techniques d???Industrie Canada ont ??t?? respect??es.
10
Telephone Consumer
Protection Act of 1991
(United States)
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number
for which charges exceed local or
In order to program this information into your facsimile machine, see your fax software documentation.
Telephone Consumer
Guidelines (Canada)
Please refer to your telephone directory under ???Privacy Issues??? and/or ???Terms of Service.??? For more detailed information, please contact:
CRTC
Terrasses de la Chaudi??re, Tour centrale 1 promenade du Portage, 5 ??tage Hull PQ K1A 0N2.
This Class B digital apparatus complies with Canadian
Cet appareil num??rique de la classe B est conforme ?? la norme
Notice to Users
RECYCLING LITHIUM ION
BATTERIES
RECYCLING
BATTERIES
You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free
Caution: Do not handle damaged or leaking
11
VAIO?? Computer Quick Start
RECYCLAGE DES
ACCUMULATEURS AUX
IONS DE LITHIUM
RECYCLAGE DES
ACCUMULATEU
RS AUX IONS DE
LITHIUM
Les accumulateurs aux ions de lithium sont recyclables.
Vous pouvez contribuer ?? pr??server l???environnement en rapportant les piles us??es dans un point de collection et recyclage le plus proche.
Pour plus d???informations sur le recyclage des accumulateurs, t??l??phonez le num??ro gratuit
Avertissment: Ne pas utiliser des accumulateurs aux ions de lithium qui sont endommag??es ou qui fuient.
Do not handle damaged or leaking lithium ion batteries.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer???s instructions.
The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 140??F (60??C) or incinerate. Dispose of used battery promptly. Keep away from children.
Ne pas utiliser des batteries au lithium ionis?? qui sont endommag??es ou qui fuient.
Une batterie non conforme pr??sente un danger d'explosion. La remplacer seulement par une batterie identique ou de type ??quivalent recommand?? par le fabricant. ??vacuer les batteries us??es selon les directives du fabricant.
La manutention incorrecte du module de batterie de cet appareil pr??sente un risque d'incendie ou de br??lures chimiques. Ne pas d??monter, incin??rer ou exposer ?? une temp??rature de plus de 60??C. ??vacuer promptement la batterie us??e. Garder hors de port??e des enfants.
12
INDUSTRY CANADA NOTICE
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.2. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.
Notice to Users
AVIS D???INDUSTRIE CANADA
REMARQUE: Cet ??quipement est conforme aux Sp??cifications Techniques des ??quipements Terminaux d???Industrie Canada en vigueur.
Le Nombre ??quivalent de Sonneries (REN) de cet ??quipement terminal est 0,2. Le REN attribu?? ?? chaque ??quipement terminal indique le nombre maximum de terminaux que l???on peut connecter ?? une interface t??l??phonique. Il est possible de raccorder ?? une interface plusieurs combinaisons d???appareils, mais la somme des Nombres ??quivalents de Sonneries de tous ces appareils ne doit pas d??passer cinq.
13
VAIO?? Computer Quick Start
14
Setting Up
Congratulations on your purchase of the Sony VAIO?? computer. Sony has combined
15
VAIO?? Computer Quick Start
Unpacking Your Computer
Carton Contents
Power cord
These hardware components are included.
VAIO Computer Documents
???VAIO?? Computer User Guide ??? A searchable
???VAIO?? Computer Quick Start ??? Contains information on unpacking and setting up your computer for immediate use.
???VAIO?? Computer Specifications (Windows?? XP) ??? An
???VAIO?? Computer Specifications (Windows?? 2000) ??? A printed sheet that details your computer's hardware specifications.
16
Unpacking Your Computer
Software CDs
Depending on the model you purchased, additional program CDs may be included with your computer.
Recovery CDs
Only computers equipped with the Microsoft?? Windows?? 2000 Professional operating system come with Recovery CDs. Computers with the Microsoft?? Windows?? XP operating system feature a Hard Disk Drive recovery process that eliminates the need for Recovery CDs.
???For more information on Hard Disk Drive recovery for models with Windows?? XP, see ???VAIO Recovery Options??? on page 39.
???Application Recovery CDs ??? Enables you to reinstall individual programs and device drivers.
???System Recovery CDs ??? Enables you to restore the operating system and programs that shipped with your computer. This CD restores your computer to its original factory settings, so user data and programs installed since you started using your computer will be lost.
17
VAIO?? Computer Quick Start
Applying Ergonomics
Your computer is a portable device and can be used in a variety of environments. Whenever possible, you should apply the following ergonomic considerations:
???Position of your computer ??? Place the computer directly in front of you as you work. Keep your forearms horizontal, with your wrists in a neutral, comfortable position while using the keyboard, touch pad, or external mouse. Let your upper arms hang naturally at your sides. Take breaks during sessions with your computer. Excessive use of the computer may strain muscles or tendons.
???Furniture and posture ??? Sit in a chair with good back support and armrests. Adjust the level of the chair so your feet are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning far backward.
???Viewing angle of the computer???s display ??? Tilt the display to find the best viewing angle. Also try adjusting the brightness setting of the display. Following these suggestions can reduce eye strain and muscle fatigue.
???Lighting ??? Choose a location where windows and lights do not create glare or reflection on the display. Use indirect lighting to avoid bright spots on the display. You can purchase accessories for your display that help reduce glare. Proper lighting adds to your comfort and work effectiveness.
???Placement of an external display ??? When using an external display, set the display at a comfortable viewing distance. Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.
18
Locating Controls and Ports
Locating Controls and Ports
Front
13 14 15 16
12
11
10
* Wireless LAN functionality available on selected models only.
19
VAIO?? Computer Quick Start
Back
Only connect 
Network (Ethernet) port. Do not connect any other type of network cable or any telephone line to this port. Connecting cables other than those listed above may result in an electric current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the unit to a network, refer to your
20
Locating Controls and Ports
Left
21
VAIO?? Computer Quick Start
Right
22
Locating Controls and Ports
Bottom
23
VAIO?? Computer Quick Start
24
Getting Started
This section helps you get your computer running and registered, so you can take advantage of Sony???s many support options. You???ll also learn how to locate your
25
VAIO?? Computer Quick Start
Turning On Your Computer
To use your computer immediately, use the supplied AC adapter as a power source. Your supplied battery is not charged when you unpack it, however, you can begin charging it when you use your AC adapter. See ???Powering Your Computer??? in your
To charge the battery
1Open the computer lid.
2Push the battery bay cover down to open it. The battery bay cover swings out but does not detach from the computer.
Opening the Battery Bay
3Slide the battery (with the logo facing up) into the battery bay. If the computer is on, it automatically detects the battery.
26
Turning On Your Computer
Inserting the Battery
Battery (supplied)
4Push the battery bay cover up until it clicks into place.
5Connect the AC adapter to the computer. See ???To connect the AC adapter.???
Once you connect the AC adapter to the computer, the battery begins to charge whether the computer is on or off. The battery indicator 
shows the battery status. The indicator blinks as the battery charges. See ???Powering Your Computer??? in your
27
VAIO?? Computer Quick Start
To connect the AC adapter
1 Plug the AC adapter cable into the DC IN port.
Connecting the AC Adapter to the Computer
AC adapter
(supplied)
DC IN port 
Power cord 
(supplied)
2 Plug the power cord into the AC adapter and an AC outlet.
.
??? Use only the supplied AC adapter with your computer.
28
Turning On Your Computer
To open and turn on the computer
1Slide the release latch to the right and lift the cover while holding the bottom of the computer firmly.
Opening the Computer
Release latch
2 Press the power button until the green power indicator lights up.
Turning on the Computer
Power button
Power indicator
??? If you hold down the power button, the computer turns off.
29
VAIO?? Computer Quick Start
3If necessary, adjust the brightness controls for the LCD display as follows:
???To increase brightness, press the Fn+F5 keys, and then press the Up Arrow key 
or Right Arrow key 
.
???To decrease brightness, press the Fn+F5 keys, and then press the Down Arrow key 
or Left Arrow key 
.
30
Using the Touch Pad
Using the Touch Pad
The computer contains a pointing device called a touch pad. You can point to, select, drag, and scroll objects on the screen using the
Describing the touch pad
Locating the Touch Pad
31
VAIO?? Computer Quick Start
Moving your finger along the right edge of the touch pad
Equivalent to scrolling vertically. (The scroll function is available only with programs that support a touch pad scroll feature.)
Moving your finger along the bottom to scroll horizontally
Equivalent to scrolling horizontally. (The scroll function is available only with programs that support a touch pad scroll feature.)
Registering Your Computer
???You are prompted to register your computer the first time you turn on the unit. Follow the
Take advantage of Sony???s commitment to quality customer support and receive these benefits by registering your computer:
???Sony Customer Support ??? Talk to a support representative to troubleshoot problems you may have with your computer.
???Limited Warranty Extension ??? Protect your investment. See the Warranty Card for more details.
???Product Information Notification ??? By giving Sony your contact information, you will enable Sony to reach you regarding performance updates and upgrades.
32
Locating Your VAIO Computer User Guide
Locating Your VAIO Computer User Guide
The
???Mice and Keyboards
To open the user guide (Windows XP)
1Click Start on the Windows?? taskbar, and then click Help and Support. The Help and Support Center window appears, displaying information about your VAIO?? computer and Microsoft?? Windows?? operating system.
Locating the VAIO User Guide (Windows XP)
User Guide link
33
VAIO?? Computer Quick Start
2Click VAIO User Guide in the Pick a Help topic column. A second Help and Support Center window appears, which offers information about your computer.
VAIO User Guide Window (Windows XP)
34
Locating Your VAIO Computer User Guide
To open the user guide (Windows 2000)
???Click Start on the Windows?? taskbar, point to VAIO Help Center and click
VAIO User Guide. The VAIO User Guide appears.
VAIO User Guide (Windows 2000)
35
VAIO?? Computer Quick Start
Setting Up A
This section describes the basic steps for setting up your
To set up a
1Connect a telephone cable to your computer. See ???Setting up a
2Click Start, point to All Programs, Accessories, Communications, and then click New Connection Wizard. The New Connection Wizard appears.
New Connection Wizard
3Click Next.
4If it is not already selected, click Connect to the Internet.
5Click Next.
6Follow the
36
Setting Up A
To set up a
1Click Start, point to Programs, Accessories, Communications, and then click Internet Connection Wizard. The Internet Connection Wizard window appears.
Internet Connection Wizard
2Follow the
37
VAIO?? Computer Quick Start
Turning Off Your Computer
Using the power button to turn off your computer may result in loss of data. Follow the steps below to properly turn off your computer and avoid losing data.
To turn off your computer
1Close all operations.
2Click Start on the Windows?? taskbar.
3(Windows XP) Click Turn Off Computer at the bottom of the Start menu to display the Turn off computer window, and select Turn Off. (Windows 2000) Click Shut Down at the bottom of the Start menu to display the Shut Down Windows window, and select Shut Down.
???Respond to any prompts warning you to save documents.
4Wait for your computer to turn off automatically. The computer is off when the power indicator turns off.
???During a period of inactivity, you can conserve battery life by using power saving modes. See ???Conserving Battery Power??? in the VAIO?? Computer User Guide for more information.
???If you are unable to turn off the computer, press the power button and hold it. This operation may result in data loss.
38
Expanding Your Computing
Power
This section helps you get started upgrading computer memory and locating information about preinstalled programs.
39
VAIO?? Computer Quick Start
Upgrading Memory
Depending on the configuration you purchased, your computer may accept additional memory modules. For information about installation procedures, refer to the
The specifications supplied with your computer (either
Locating Preinstalled Programs
Your computer comes with a variety of preinstalled audio/video programs. The following sources offer a list of preinstalled programs, descriptions, and information:
???VAIO?? Computer Specifications (Windows XP) ??? The
???All Programs (Windows XP) ??? The All Programs menu, which you can access from the Start menu, contains a list of all the preinstalled programs on your computer.
???Programs (Windows 2000) ??? The Programs menu, which you can access from the Start menu, contains a list of all the preinstalled programs on your computer.
40
Caring for Your Computer
This section provides information on how to safely use your Sony computer.
41
VAIO?? Computer Quick Start
Storing Your Computer
???Do not use or store your computer in a location subject to:
???Heat sources, such as radiators or air ducts
???Direct sunlight
???Excessive dust
???Moisture or rain
???Mechanical vibration or shock
???Strong magnets or speakers that are not magnetically shielded
???Ambient temperature higher than 95??F (35??C) or less than 40??F (5??C)
???High humidity
???Do not place electronic equipment near your computer. When running, the computer???s electromagnetic field may cause other electronic equipment in close proximity to malfunction.
???Provide adequate air circulation to prevent internal heat buildup. Do not place your computer on porous surfaces such as rugs or blankets, or near materials such as curtains or draperies that may block ventilation. Leave a space of at least 8 inches (20 cm) behind the back of the computer.
???If the computer is brought directly from a cold location to a warm one, moisture may condense inside your computer. In this case, allow at least one hour before turning on your computer. If any problems occur, unplug your computer, and contact your Sony Service Center.
???The computer uses
???Do not drop the computer or place heavy objects on top of the computer.
Using Cables and Connections
???Use only specified peripheral equipment and interface cables.
???Do not use cut or damaged connection cables.
???If the telephone company makes a service call to your home or office and determines that your computer is responsible for a problem, the telephone company may bill you for the service call. Also, if you do not disconnect your computer when it is adversely affecting a telephone line, the telephone
42
Cleaning Your Computer
company has the right to disconnect your service until you correct the problem.
Cleaning Your Computer
???Clean the computer with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. You can use canned compressed air specifically for computers to remove dust.
???If a solid object falls onto the computer or a liquid leaks into the computer, immediately turn off and unplug the computer. It is best to have the computer checked by qualified personnel before you use it again.
???Avoid rubbing the LCD screen as this can damage the screen. Use a soft, dry cloth to wipe the LCD screen or canned compressed air.
???Always disconnect the power cord before cleaning the computer.
Handling the LCD Screen
???Direct sunlight can damage the LCD. Be careful when using the computer near a window.
???Do not scratch the LCD or exert pressure on it. This can cause a malfunction.
???Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
???The screen becomes warm during operation. This is normal and does not indicate a malfunction.
???The LCD is manufactured using
43
VAIO?? Computer Quick Start
44
VAIO Recovery Options
The VAIO?? Recovery Wizard enables you to recover preinstalled software programs and the operating system on your computer. You can also use this utility to create a Recovery Media Kit. The Recovery Media Kit enables you to reclaim hard drive space and return your computer to normal operation.
???This program repairs or replaces software. For any hardware problems, contact a Sony authorized repair facility.
39
VAIO?? Computer Quick Start
About Recovery Options
You have several options when recovering software or your computer???s operating system.
When you recover drive C, drive D, or perform a complete recovery, the VAIO Recovery Wizard deletes and replaces all the files on the selected drives.
Sony recommends backing up your personal data to storage media or to another computer before proceeding with system recovery.
Accessing the VAIO Recovery Wizard
You can start the VAIO Recovery Wizard utility from the Microsoft?? Windows?? XP Start menu, from the Recovery Media Kit, or from using the F10 key1 on notebook computers. Depending on how you access the VAIO Recovery Wizard, you have different system and software recovery options.
System and software recovery options
???Create the Recovery Media Kit
You can create a Recovery Media Kit, consisting of CDs and DVDs, which enable you to recover your computer at a later date if the software stops working properly. You can start the VAIO Recovery Wizard from the Windows XP Start menu, and create a Recovery Media Kit.
Return your computer???s operating system to a previous working state by performing a System Restore. You can access this recovery option by starting the VAIO Recovery Wizard, or by using the Windows XP System Restore Wizard.
Returns the drive C to its original
Return drives C and D to their original
1 This feature is available for VAIO?? notebook computers only.
40
About Recovery Options
option, you lose all data and settings on both drives. To recover drives C and D, start the VAIO Recovery Wizard from the Windows XP Start menu, the Recovery Media Kit, or by using the F10 key on notebook computers.
???Recovering drives C and D with the Recovery Media Kit is the only way to restore the hidden recovery drive.
Recover specific
???Perform a complete hard disk drive recovery
Completely recover your computer???s hard disk drive. This option recovers drives C and D, and the hidden recovery drive. To perform a complete hard disk drive recovery, start the VAIO Recovery Wizard from your Recovery Media Kit.
41
VAIO?? Computer Quick Start
About the Recovery Media Kit
The Recovery Media Kit is created using your own CDs and/or DVDs. You can create the Recovery Media Kit, or purchase it from Sony.
Recovery Media Kit overview
Confirm that you have sufficient CD and/or DVD recordable media available before you begin creating the Recovery Media Kit. You should also have a permanent marking pen ready, to label each CD and/or DVD media.You can create your kit using a single type of media or by combining media types, as follows:
???One recordable CD
(Your VAIO?? computer must be equipped with a
???Up to 12 recordable CDs
(Your VAIO computer must be equipped with a
Before you begin creating the Recovery Media Kit, prepare your computer for the process, as follows:
???Close all open programs.
???Disconnect all network connections.
???Disconnect all peripheral devices.
???Do not interrupt the power.
???Disable any virus protection software.
???Disable your screen saver.
Creating the Recovery Media Kit
The Recovery Media Kit can be used to start the VAIO Recovery Wizard, in the event your system is unable to start normally. You can reclaim the portion of your hard drive that is allocated to system recovery using the Recovery Media Kit.
1 A
42
About the Recovery Media Kit
To create the Recovery Media Kit
1Click Start in the Windows?? taskbar, point to All Programs, and then click the VAIO?? Recovery Wizard.
The VAIO Recovery Wizard appears.
???You can start the VAIO Recovery Wizard by
VAIO Recovery Wizard
2Read the
3Select Create Recovery Media Kit (Strongly Recommended), and click Next.
43
VAIO?? Computer Quick Start
VAIO Recovery Wizard ??? Selecting Create Recovery Media Kit
4Select the Recovery Media Kit that you want to create.
You can create your kit using a single type of media or by combining media types, as follows:
???One recordable CD
(Your VAIO?? computer must be equipped with a
???Up to 12 recordable CDs
(Your VAIO computer must be equipped with a
5Click Next. Your computer???s optical drive tray opens automatically.
6Insert a blank disc into the drive and close the drive. Click Next.
The CD creation process begins. A window with a progress bar appears.
1 A
44
About the Recovery Media Kit
???The time required to create each CD or DVD may vary, depending on your optical drive???s recording speed.
7When prompted, eject the disc. Label the top of the disc with a permanent marker according to the
8Repeat steps step 6 through step 7 for each CD or DVD.
9When the text, The Recovery Media Kit is complete appears, click OK.
10Click Finish. Store the Recovery Media Kit in a safe location.
To order the Recovery Media Kit
1Go to the Sony Direct Accessories and Parts Center Web site at http://servicesales.sel.sony.com.
2Enter your computer???s model number (for example,
List Parts and accessories.
3Follow the online instructions to order the Recovery Media Kit.
???If you are not able to access the Sony Direct Accessories and Parts Center Web site, contact a customer service representative at
45
VAIO?? Computer Quick Start
Using the VAIO Recovery Wizard
The VAIO?? Recovery Wizard provides recovery options for your computer. You can access this tool from Windows?? XP Start menu, your Recovery Media Kit, or by pressing the F10 key1 on your notebook computer.
Starting the VAIO Recovery Wizard
To access the VAIO Recovery Wizard from Windows XP
1Click Start in the Windows?? taskbar, point to All Programs, and click
VAIO Recovery Wizard.
???Using the VAIO Recovery Wizard may require you to restart your computer, even if you cancel and exit the wizard.
2From the Welcome window, click Next.
3Choose one of the available menu options.
To access the VAIO Recovery Wizard from the Recovery Media Kit
1Press the power switch on the computer to turn on the power.
2Open the optical drive, and place the Startup Recovery Disc in the optical drive.
3Close the drive.
4Turn off your computer.
5Wait for approximately 30 seconds, and then turn on the computer.
6When prompted, insert the Recovery Disk 1 into the optical drive, and then click OK.
The VAIO Recovery Wizard appears.
7Click Next.
8Choose one of the available menu options.
1 This feature is available for VAIO?? notebook computers only.
46
Using the VAIO Recovery Wizard
To start the VAIO Recovery Wizard using the F10 Key (for notebook computers only)
1Turn off your notebook computer.
2Press the power switch on the computer to turn on the power.
3When you see the VAIO logo appear on the computer???s screen, briefly press the F10 key.
4Click Next.
5Choose one of the available menu options.
Using the VAIO Recovery Wizard
To use Windows System Restore from the VAIO Recovery Wizard
1Start the VAIO?? Recovery Wizard, and click Next.
2Select Proceed with System Recovery, and click Next.
3Select Windows?? System Restore, and click Next.
4Follow the
47
VAIO?? Computer Quick Start
VAIO Recovery Wizard ??? Selecting Windows System Restore
To recover drive C
1Start the VAIO Recovery Wizard, and click Next.
2Select Proceed with System Recovery, and click Next. If using the Recovery Media Kit, skip this step.
3Select C Drive Recovery, and click Next.
48
Using the VAIO Recovery Wizard
VAIO Recovery Wizard ??? Selecting C Drive Recovery
4Read the
5The wizard begins the drive C recovery. When it is finished, click Next.
6Click Finish. Your computer restarts.
To recover drives C and D (and reclaim all space on the hard disk drive)
1Start the VAIO?? Recovery Wizard, and click Next.
2Select Proceed with System Recovery, and click Next. (If you are using the Recovery Media Kit, skip step 2.)
3Select Custom Recovery (for Advanced Users), and click Next.
4Select C and D Drive Recovery, and click Next.
If you are using the Recovery Media Kit, you have two choices for this recovery option:
??? Keep the Recovery Drive (Recommended)
49
VAIO?? Computer Quick Start
???Remove the Recovery Drive.
VAIO Recovery Wizard ??? Selecting the C and D Drive Recovery option
5Choose the size of drive C. Any remaining disk space is allocated to drive D (minus the space allocated for the recovery drive). Click Next.
???Computers that come equipped with Giga Pocket software do not allow you to set the drive D to zero.
6The wizard starts implementing recovery. When it is finished, click Next.
7Click Finish, and the computer restarts.
To recover software applications
1Start the VAIO?? Recovery Wizard, and click Next.
2Select Proceed with System Recovery, and click Next. If using the Recovery Media Kit, skip this step.
50
Using the VAIO Recovery Wizard
3Select Custom Recovery (for Advanced Users), and click Next.
???If you select the Application Recovery option, you cannot return to the system recovery portion of the VAIO?? Recovery Wizard without restarting your computer.
4Select Application Recovery, and click Next.
VAIO Recovery Wizard ??? Selecting Application Recovery
5Click to select the check box for each software program you want to recover. Click Next.
You may need to use the scrollbar to view all available software programs.
51
VAIO?? Computer Quick Start
VAIO Recovery Wizard ??? Selecting applications
6As your computer prepares to install each application, a status indicator appears. You may see installation wizards, messages, and prompts. Follow the instructions provided in each wizard, and respond to each prompt or message.
When the selected software has been recovered, the Application Recovery Complete window appears.
7If you want to recover additional software, click Back. The Application Recovery window appears with a listing of the available software titles.
8Click Finish. Your computer restarts.
???If the recovered software does not function properly or you see an installation error message, try recovering the software again.
52
Using the VAIO Recovery Wizard
To perform a complete hard disk drive recovery
You must use the Recovery Media Kit to perform a complete hard disk drive recovery.
1Press the power switch on the computer to turn on the power.
2Open the optical drive, and place the Startup Recovery Disc in the optical drive.
3Close the drive.
4Turn off your computer.
5Wait for approximately 30 seconds, and then turn on the computer.
6When prompted, insert the Recovery Disk 1 into the optical drive, and then click OK.
The VAIO Recovery Wizard appears.
7Click Next.
8Select Custom Recovery (for Advanced Users), and click Next.
9Select Complete Recovery, and click Next.
10You may see installation wizards, messages, and prompts. Follow the instructions provided in each wizard, and respond to each prompt or message. Your computer may restart.
11When the optical drive ejects, remove the disc. Close the drive, and click Next. Your computer may restart several times.
Additional Information
???Certain software, such as DVgate??? Plus software, automatically saves data to drive D. If you choose not to have a drive D partition, you must change the software settings to enable file saving to drive C.
???Resizing your hard disk drive partitions with
???Giga Pocket??? software requires a drive D in order to operate. For VAIO?? computers with Giga Pocket software preinstalled, you cannot set the drive D size to zero.
53
VAIO?? Computer Quick Start
54
Using the Application Recovery
and System Recovery CDs
(For Windows?? 2000 models only) You can restore your system, individual programs, or drivers, using the Application Recovery and System Recovery CDs.
61
VAIO?? Computer Quick Start
Application and System Recovery CDs
Your computer comes with the following Application Recovery and System Recovery CDs. You will need an optical drive to use these recovery CDs. If your computer does not come with an optical drive, use an external optical drive.
Application Recovery CDs
Sony Electronics Inc.
These CDs enable you to reinstall individual programs and device drivers if they become corrupted or are erased.
System Recovery CDs
Sony Electronics Inc.
These CDs enable you to restore the operating system and programs that shipped with your computer if they become corrupted or are erased. These CDs restore your computer to its original factory settings, so user data and programs installed since you started using your computer will be lost.
Using Your Recovery CDs
The following sections describe how to use the Application Recovery and System Recovery utilities.
Using the Application Recovery CDs
The Application Recovery CDs enable you to reinstall individual programs and device drivers, and to repair programs if they become corrupted or are erased. Reinstalling an individual program or device driver may correct a problem you are experiencing with your computer, peripheral hardware, or software. You may not need to reinstall the entire contents of your hard disk. To reinstall all the programs that shipped with your computer, use the System Recovery CDs. See ???Using the System Recovery CDs??? for more information.
???Your computer must have a Microsoft?? Windows?? operating system to run the Application Recovery CD utility.
62
Using Your Recovery CDs
To reinstall programs with the Application Recovery CDs
???Your system may include one or more Application Recovery CDs. If you have more than one Application Recovery CD, insert the first CD (CD No. 1) to run the Application Recovery program. You may be prompted to insert the next CD, depending on the application you wish to restore.
1Turn on your computer. If your computer is already on, close all open programs.
2Logon to the Microsoft?? Windows?? desktop.
3Insert Sony Application Recovery CD No. 1 into your computer???s optical drive. The Application Recovery utility starts automatically.
4Click OK in the VAIO welcome window. The Sony Application Recovery Program window appears.
5
6
7Follow the
To reinstall device drivers using Windows XP operating system
(For Windows?? XP systems only) The Microsoft?? Windows?? XP operating system is capable of reinstalling the original
1Click Start in the Windows taskbar, then
2Click Properties. The System Properties dialog box appears.
3From the Hardware tab, click the Device Manager button.
4
*Unknown devices are identified by a yellow question mark. A device that has a driver problem is identified by a yellow exclamation mark.
63
VAIO?? Computer Quick Start
5Follow the
???If Windows?? XP does not reinstall the device driver(s), follow the steps in the next section to reinstall the device driver(s) using the Application Recovery CD(s).
To reinstall device drivers with the Application Recovery CDs
???Your system includes one or more Application Recovery CDs. Insert Application Recovery CD No. 1 to start the application or driver recovery process. You are prompted to insert the next CD(s), depending on the application or driver you want to restore.
1Logon to the Microsoft?? Windows?? desktop.
2Insert Application Recovery CD No. 1 into your computer???s optical drive. The VAIO welcome window appears. Click OK, then click Quit to close the Sony Application Recovery utility. (Leave the CD in the optical drive.)
3Click Start on the Windows?? taskbar, and
4Click Properties. The System Properties dialog box appears.
5Click the Hardware tab, and click Device Manager.
6
7In the Hardware Update Wizard, click to select Install from a list or specific location (Advanced).
8Click Next.
9Click to cancel the Search removable media (floppy,
10Click to select the Include this location in the search check box.
11Click Browse. The Browse For Folder dialog box appears.
*Unknown devices are identified by a yellow question mark. A device that has a driver problem is identified by a yellow exclamation mark.
64
Using Your Recovery CDs
12Navigate to the optical drive, and click to select the Application Recovery CD. The CD contents are displayed.
13Click the folder name of the device in which you want to reinstall, and click
OK. The Hardware Update Wizard appears.
14Click Next, and select the device folder. The Microsoft?? Windows?? operating system automatically reinstalls the device driver(s) from the Application Recovery CD.
15Click Finish, and remove the Application Recovery CD from the optical drive.
16Turn off your computer by clicking Start, and then Turn off computer.
17Wait 30 seconds, and turn on your computer.
If you have any questions about using the Application Recovery CD(s), visit http://www.sony.com/pcsupport.
Using the System Recovery CDs
The System Recovery CDs enable you to format your hard disk drive and restore the operating system and all original, preinstalled programs. If the operating system or programs become corrupted or are erased, you can restore your computer to the original factory settings.
The System Recovery process removes all programs that you may have installed since you started using your computer. Reinstall any program that was not included with the computer when you purchased it.
You may not need to reinstall the entire contents of your hard drive. If you experience a problem with your computer, reinstalling an individual device driver or program may correct the problem. Use the Application Recovery CDs to reinstall individual programs and device drivers. See ???Using the Application Recovery CDs??? for more information.
The System Recovery CDs contain a backup copy of all the programs originally installed on your hard disk. It can be used only to recover the hard disk of the Sony computer you purchased.
When you successfully complete your system recovery, you are prompted to complete the Windows?? registration process.
65
VAIO?? Computer Quick Start
System Recovery options
???Default System Drive Recovery ??? All data on Drive C is deleted. The factory default settings and programs are restored on this drive only.
???Change Partition Size and Recover ??? All partitions, custom installations, and changes are removed from the hard drive. You can set the partition sizes for both Drive C and Drive D. The original, preinstalled operating system and programs are restored.
???Factory Default Settings Recovery ??? All data and partitions are removed from the hard drive. All original factory settings, the operating system, and preinstalled programs are restored.
The System Recovery utility does not back up your system???s data. If you wish to retain your system data, perform a backup to an external media.
To use the System Recovery CDs
Your system may take a few minutes to load necessary files. A blue screen may appear during the downloading process.
Your system may include one or more System Recovery CDs. If you have more than one System Recovery CD, insert the first CD (CD No. 1) to run the System Recovery program. You will be prompted to insert the next CD(s) once the information from the first CD has been installed.
1Press the disc eject button to open the optical disc drive and extend the disc tray.
2Insert the Sony System Recovery CD No. 1 into the optical drive, and close the drive. The first CD must be in the drive before you restart your computer.
3(Windows XP) Turn off your computer by clicking Start, Turn off computer, and selecting Turn Off.
(Windows 2000) Turn off your computer by clicking Start, Shut Down, and selecting Shut Down.
4Wait at least 30 seconds, and turn on your computer. The System Recovery utility restarts from the optical drive. Your screen displays the downloading progress, ???Starting VAIO Recovery Utility.???
5When the VAIO System Recovery Utility wizard appears, click Next.
6The Notes on Use window appears. Click Next.
66
Using Your Recovery CDs
7On the Main Menu - Product Recovery window, select the appropriate option to recover your system.
8Follow the
???The recovery process takes approximately 30 to 60 minutes to complete.
After recovering your system using the System Recovery CD(s), you may be prompted to insert your Application Recovery CD(s) after restarting Windows. Use the Application Recovery CD(s) to complete full restoration of your system.
If your computer does not start from the Recovery CD
1Press the power button and hold it for more than four seconds to turn off the computer.
2Turn on the computer. When the Sony logo is displayed, press the F2 key. The BIOS Setup Utility appears.
3Press the right arrow key 
to select the Exit menu.
4Press the down arrow key 
to select Get Default Values, and press Enter. The Setup Confirmation window appears.
5Press Enter again to select Yes.
6Make sure Exit (Save Changes) is selected, and then press Enter. The Setup Confirmation window appears again.
7Make sure Yes is selected, and press Enter. The computer restarts from the Recovery CD.
???If you have more than one System Recovery CD, insert the first CD to run the System Recovery program. You are prompted to insert the second CD once the information from the first CD has been installed.
The recovery process takes 30 to 60 minutes to complete.
After recovering your system using the System Recovery CDs, you may be prompted to insert your Application Recovery CDs after restarting the Windows operating system. Insert the Application Recovery CD to automatically complete recovery of your system.
67
VAIO?? Computer Quick Start
68
Troubleshooting
Computer
What do I do if my computer won???t start?
???Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on.
???Make sure the battery is inserted properly and charged.
???Make sure the floppy disk drive (if applicable) is empty.
???If the computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS is turned on and working.
???If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness and contrast controls are adjusted correctly. See the guide that came with your display for details.
???Disconnect the AC adapter and remove the battery. Wait one minute. Reattach the AC adapter and reinsert the battery. Turn on the power.
???Condensation may cause the computer to malfunction. If this occurs, do not use the computer for at least one hour.
???If the computer still does not turn on, follow these steps:
1 Unplug the power cord and remove the battery.
2 Use a thin, straight object (such as a paper clip) to press the reset button.
???See ???Locating Controls and Ports??? on page 19 to locate the reset button.
3 Reinsert the power cord and the battery.
4 Turn on the computer.
69
VAIO?? Computer Quick Start
What do I do if a BIOS error appears when my computer starts?
If the message ???Press <F1> to resume, <F2> to setup??? appears at the bottom of the screen, follow these steps:
1Press the F2 key. The BIOS Setup menu appears.
2Set the date (month/day/year). Press Enter.
3Press the Down Arrow key 
to select System Time, and then set the time (hour: minute: second). Press Enter.
4Press the Right Arrow key 
to select the Exit tab, and then press the
Down Arrow key 
to select Get Default Values. The message Load default values for all SETUP items appears.
5Press Enter. The Setup Confirmation window appears.
6Select Yes, and press Enter.
7Select Exit (Save Changes), and press Enter. The Setup Confirmation window appears again.
8Select Yes, and press Enter. The computer restarts.
???If this occurs on a regular basis, contact Sony Computing Support (http://www.sony.com/pcsupport).
What do I do if the message ???Operating system not found??? appears when my computer starts, and why won???t Windows start?
???Make sure the computer does not have a
???If a
1 Remove the floppy disk.
2 Restart the computer and confirm that the Microsoft?? Windows?? operating system starts properly.
???If Windows still does not start, follow these steps to initialize the BIOS:
1 If there is a disk in the floppy disk drive, then remove it.
70
Computer
2Turn off the computer.
3Remove any peripheral devices connected to the computer.
4Restart the computer.
5Press the F2 key when the Sony logo appears. The BIOS Setup window appears.
6Press the Right Arrow key 
to select the Exit menu.
7Press the Down Arrow key 
to select Get Default Values. The message Load default values for all SETUP items appears.
8Press Enter. The Setup Confirmation window appears.
9Select Yes, and press Enter.
10Select Exit (Save Changes), and press Enter. The Setup Confirmation window appears again.
11Select Yes, and press Enter. The computer restarts.
Why does my computer stop responding? Why can???t I turn off my computer?
It is best to turn off your computer using the Turn Off Computer option on the Microsoft?? Windows?? Start menu, located on the taskbar. Using other methods, including those listed below, may result in loss of unsaved data.
???Click Start on the Windows?? taskbar, select Turn Off Computer, and then click Turn Off.
???If your computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously. When the Windows Task Manager dialog box appears, click Turn Off from the Shut Down menu.
???If your computer still does not turn off, press and hold the power button or slide and hold the power switch until the computer turns off.
???If your computer stops responding while playing a CD or DVD, press the Ctrl+Alt+Delete keys simultaneously. You can turn off the computer from the Windows Task Manager.
???Pressing the Ctrl+Alt+Delete keys simultaneously or turning off the computer with the power button or switch may cause loss of data.
???Remove the AC adapter and battery.
71
VAIO?? Computer Quick Start
Why won???t my computer enter Standby or Hibernate mode?
Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or Hibernate.
To restore the computer to normal operating stability:
1Close all open programs.
2Restart the computer. Follow these steps:
1Press the Windows key 
.
2Press U.
3Press R to select restart.
3If the computer does not restart, follow these steps:
1Press the Ctrl+Alt+Delete keys simultaneously. The Windows Task Manager window appears.
2Press and release Alt to highlight the menu bar, and press the Right Arrow 
key to select Shut Down.
3Press Enter.
4Press R to select restart.
4If this procedure does not work, press and hold the power button or slide and hold the power switch until the computer turns off.
Why is the sound of my computer???s fan so loud?
The computer???s fan may be running at a high speed to cool the CPU. By lowering the CPU speed, you also lower the speed and noise level of the computer???s fan. If your computer comes with the PowerPanel??? utility*, use it to lower the CPU speed. If your computer does not come with the PowerPanel utility, use the power schemes to lower the CPU speed.
* Available on selected models.
72
Computer
To lower the CPU fan speed using the PowerPanel utility:
1On the Windows?? taskbar, 
or Profile icon 
, depending on the model you purchased.
2Select Edit/Create Profiles. The AC Power - Profile Editor window appears.
3
4
5Restart your computer.
???See PowerPanel Help for more information.
To lower the CPU speed using the power schemes:
1Click Start on the Windows?? taskbar, and click Control Panel.
2Click Performance and Maintenance, and click Power Options. The Power Options Properties window appears.
3Select Portable/Laptop in the Power schemes box.
4Click Apply.
5Click OK.
Why does the System Properties dialog box display a slower CPU speed than the maximum?
This is normal. Because your computer???s CPU utilizes a type of CPU speed controlling technology for power conservation purposes, System Properties may display the CPU???s current speed instead of the maximum speed.
Why don???t my changes appear on the computer screen (LCD)?
You may need to refresh the computer screen. Press and hold the Windows key 
, and press D twice.
73
VAIO?? Computer Quick Start
Support Options
If you have questions about your computer or the preinstalled programs, refer to the following sources for answers in the sequence listed below.
1VAIO?? Computer User Guide
The
2Program Guides and Help Files
The preinstalled programs on your computer may come with individual help guides. These guides are stored on the hard disk as
3Operating System Online Support
Your computer comes preinstalled with a Microsoft?? Windows?? operating system. For operating system support, you can visit Microsoft?? customer support at: http://support.microsoft.com/directory/.
4Sony Computing Support
This service provides instant access to information on commonly encountered problems. Type a description of the problem and the Knowledge Database searches for the corresponding solutions online. You can visit Sony Computing Support at: http://www.sony.com/pcsupport.
74
Index
A
Application Recovery CD 62 applications
software programs 56
B
battery
charging 26 indicator 19 brightness control 30
buttons left 19
C
caps lock 19 complete recovery 59 computer
controls and connectors 19 LCD screen 43
online support 74 specifications 16 specifications (online) 34 storage 42 troubleshooting 69 turning off 38
turning on 26
connecting
creating
Recovery Media Kit 49
D
DC IN port 20
E
Electronic Flyer 34, 35 Energy Star 5
Ethernet port 20
F
F10
recovery 53 faxes
laws governing 11
H
handling the LCD screen 43 hard disk drive
indicator 19
hard drive recovery 45 headphone jack 20 help 33
I
i.LINK port 21 indicators
battery 19
75
VAIO?? Computer Quick Start
caps lock 19
hard disk drive 19 Memory Stick media 19 num lock 19
input devices 9 interference 9 internal speaker 19 Internet connection 36
J
jacks
headphone 20 microphone 20 modem jack 20
K
keyboard 19
L
LCD screen handling 43
M
Memory Stick media indicator 19 slot 21
microphone jack 20 modem
laws governing 11 modem jack 20 Monitor (VGA) port 20 Monitor port 20
N
network connector 20 num lock 19
O
ordering
Recovery Media Kit 51 output devices 9
P
partition recovery 55
PC Card slot 21 phone
laws governing 11 ports
VGA (monitor) 20 power
indicator light 19 power button 29 power source 26 programs
R
radio interference 9 recovering 56
applications 56 complete system 59 drive C 54
drive C and D 55 recovery partition 55 software programs 56
76
Index
Recovery Wizard starting 52
regulatory information 8 reset button 23 restoring data 62
S
scroll lock indicator 19 shutting down computer 38 software
software programs 56 applications 56
specifications 16 specifications (online) 34 starting
Recovery Wizard 52 starting computer 26 startup problems 38 System Recovery CD 65
T
telephone line jack 20 touch pad
using 31 touchpad 19 troubleshooting 69
startup 38
turning off computer 38 turning on computer 26
TV
interference 9
U
unpacking the computer 16 updates 34, 35
W
Windows System Restore 53
77
http://www.sony.com/vaio