4-275-583-14(1)

Digital Still Camera

Instruction Manual

DSC-HX9/HX9V

English

Owner???s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.

Model No. DSC-HX9/DSC-HX9V

Serial No. ______________________________

Model No. AC-UB10/UB10B

Serial No. ______________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE

INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.

CAUTION

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

???Do not disassemble.

???Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.

???Do not short circuit and do not allow metal objects to come into contact with the battery terminals.

???Do not expose to high temperature above 60??C (140??F) such as in direct sunlight or in a

GB car parked in the sun.

2 ??? Do not incinerate or dispose of in fire.

[Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-HX9V

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

???Reorient or relocate the receiving antenna.

???Increase the separation between the equipment and receiver.

???Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

???Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

GB

4

For Customers in Europe

Hereby, Sony Corporation, declares that this DSC-HX9V Digital Still Camera is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/

[ Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

[Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,

please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

GB

5

[Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.

On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent

potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

GB

6

Refer to ???Cyber-shot User Guide??? (HTML) on supplied CD-ROM

For details on advanced operations, please read ???Cyber-shot User Guide??? (HTML) on the CD-ROM (supplied) using a computer.

Insert the CD-ROM into the CD-ROM drive.

For Windows users:

1 Click [User Guide] t [Install].

2 Start ???User Guide??? from the shortcut on the desktop.

For Macintosh users:

1 Select the [User Guide] folder and copy [eng] folder stored in [User Guide] folder to your computer.

2 After copying is complete, double-click ???index.html??? in [eng] folder.

Checking the supplied items

???Camera (1)

???Rechargeable battery pack NP-BG1 (1)/Battery case (1)

???Multi-use terminal USB cable (1)

???AC Adaptor AC-UB10/UB10B (1)

???Power cord (mains lead) (not supplied in the USA and Canada) (1)

???Wrist strap (1)

???CD-ROM (1)

???Cyber-shot application software

??????Cyber-shot User Guide???

???Instruction Manual (this manual) (1)

GB

7

Identifying parts

C For shooting: W/T (Zoom) lever For viewing: (Playback zoom) lever/ (Index) lever

D Self-timer lamp/Smile Shutter lamp/AF illuminator

E CUSTOM (Custom) button F Power/Charge lamp

G ON/OFF (Power) button H Flash

??? Do not hold your fingers near the flash.

??? When using the flash, the flash pops up automatically.

??? The flash goes down automatically when the power is turned On/Off, the camera is switched to playback mode or the shooting mode is changed.

I Microphone J Lens

K LCD screen

L (Playback) button M Control wheel

N GPS sensor (built-in, DSC- HX9V only)

O MOVIE (Movie) button P Speaker

Q HDMI connector R Hook for wrist strap

S / (In-Camera Guide/Delete) button

T MENU button

U Battery insertion slot

A Shutter button

B Mode dial

GB

8

VTripod receptacle

???Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

W Battery eject lever X Access lamp

Y Memory card slot

Z Battery/memory card cover wj (TransferJet???) mark wk Multi connector (Type3b)

GB

9

Inserting the battery pack

Eject lever

Charging the battery pack

For customers in the USA,

Canada

GB

10

Notes

???When the Power/Charge lamp on the camera does not lit even if the AC Adaptor is connected to the camera and the wall outlet (wall socket), it indicates that the charging stops temporarily on standby. The charging stops and enters the standby status automatically when the temperature is outside of the recommended operating temperature. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10??C to 30??C (50??F to 86??F).

???Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If any malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect the power source.

???When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket).

???Be sure to use only genuine Sony brand battery packs, multi-use terminal USB cable (supplied) and AC Adaptor (supplied).

GB

11

x Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using a multi-use terminal USB cable.

Note

???Note the following points when charging via a computer:

???If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not charge for an extended period of time.

???Do not turn on/off or restart the computer, or wake the computer resume from sleep mode when a USB connection has been established between the computer and the camera. The camera may cause a malfunction. Before turning on/off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer.

???No guarantees are made for charging using a custom-built computer or a modified computer.

x Charging time

The charging time is approximately 270 min. using the AC Adaptor (supplied).

Note

???The above charging time applies when charging a fully depleted battery pack at a temperature of 25??C (77??F). Charging may take longer depending on conditions of use and circumstances.

GB

12

xBattery life and number of images you can record and view

Notes

???The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use.

???The number of images that can be recorded is for shooting under the following conditions:

???Using Sony ???Memory Stick PRO Duo??? (Mark2) media (sold separately)

???The battery pack is used at an ambient temperature of 25??C (77??F).

???[GPS setting] is set to [Off] (DSC-HX9V only).

???The number for ???Shooting (still images)??? is based on the CIPA standard, and is for shooting under the following conditions:

(CIPA: Camera & Imaging Products Association)

???DISP (Display Setting) is set to [ON].

???Shooting once every 30 seconds.

???The zoom is switched alternately between the W and T ends.

???The flash strobes once every two times.

???The power turns on and off once every ten times.

???The battery life for movies applies shooting under the following conditions:

???Movie quality: AVC HD HQ

???When continuous shooting ends because of set limits (page 24), press the MOVIE (Movie) button again and continue shooting. Shooting functions such as the zoom do not operate.

GB

13

x Supplying power

The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied). You can import images to a computer without worrying about wearing down the battery pack by connecting the camera to a computer using the multi-use terminal USB cable.

Notes

???Power cannot be supplied when the battery pack is not inserted in the camera.

???Power supply from the wall outlet (wall socket) is available only when the camera is in playback mode or when a connection is made between the camera and a computer. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable.

???If you connect the camera and a computer using the multi-use terminal USB cable when the camera is in playback mode, the display on the camera is changed from

the playback screen to the USB connection screen. Press (Playback) button to switch to the playback screen.

Inserting a memory card (sold separately)

Ensure the notched corner faces correctly.

3 Close the cover.

??? Closing the cover with the battery inserted incorrectly may damage the GB camera.

14

x Memory cards that you can use

???In this manual, products in A are collectively referred to as ???Memory Stick Duo??? media, and products in B are collectively referred to as SD card.

x To remove the memory card/battery pack

Memory card: Push the memory card in once.

Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

Note

???Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory.

GB

15

Setting the clock

ON/OFF (Power)

Power/Charge lamp (green)

Control Wheel

Select items: v/V/b/B

Set the numeric value of date and time:/

Set: z

1 Press the ON/OFF (Power) button.

Date & Time setting is displayed when you press the ON/OFF (Power) button for the first time.

??? It may take time for the power to turn on and allow operation.

2 Select a desired language.

3 Select the desired area following the instructions on the screen, then press z.

4 Set [Date & Time Format], [Daylight Savings] or [Summer Time] and [Date & Time], then select [OK] t [OK].

??? Midnight is indicated as 12:00 AM, and noon as 12:00 PM.

5 Select the desired display color and the GPS setting (DSC-HX9V only), following the instructions on the screen.

???The battery pack will run out quickly if you set [GPS setting] to [On] (DSC-HX9V only).

6 When an [In-Camera Guide] introductory message is appeared on the screen, select [OK].

GB

16

Shooting still images/movies

Shutter button

Shooting still images

1 Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z indicator lights.

2 Press the shutter button fully down.

Shooting movies

1 Press the MOVIE (Movie) button to start recording.

??? Use the W/T (zoom) lever to change the zoom scale.

2 Press the MOVIE button again to stop recording.

Notes

???The sound of the lens and lever operating will be recorded when the zoom function operates while shooting a movie. The sound of the MOVIE button operating may also be recorded when movie recording is finished.

???Continuous shooting is possible for approximately 29 minutes at one time at the camera???s default settings and when the temperature is approximately 25??C (77??F). When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop to protect the camera depending on the ambient temperature.

GB

17

Viewing images

W: zoom out

T: zoom in

Control wheel

(Playback)

/ (Delete) Select images: B (next)/b (previous) or turn the control wheel

Set: z

1 Press the (Playback) button.

???When images on a memory card recorded with other cameras are played back on this camera, the registration screen for the data file appears.

x Selecting next/previous image

Select an image by pressing B (next)/b (previous) on the control wheel or by turning the control wheel. Press z in the center of the control wheel to view movies.

x Deleting an image

1 Press / (Delete) button.

2 Select [This Image] with v on the control wheel, then press z.

x Returning to shooting images

Press the shutter button halfway down.

GB

18

In-Camera Guide

This camera contains an internal function guide. This allows you to search the camera???s functions according to your needs.

/ (In-Camera Guide)

1 Press the / (In-Camera Guide) button.

???When viewing images, [Delete/In-Camera Guide] is displayed. Select [In-Camera Guide].

2 Select a search method from [In-Camera Guide].

Shoot/ playback guide: Search for various operation functions in shooting/viewing mode.

Icon guide: Search the function and meaning of displayed icons.

Troubleshooting: Search common problems and their solution.

Objective guide: Search functions according to your needs.

Keyword: Search functions by key words.

History: Display the last 12 items displayed in [In-Camera Guide].

GB

19

Introduction of other functions

Other functions used when shooting or playing back can be operated using the control wheel or MENU button on the camera. This camera is equipped with a Function Guide that allows you to easily select from the functions. While displaying the guide, try the other functions.

Control wheel

MENU

Function Guide

x Control wheel

DISP (Display Setting): Allows you to change the screen display. (Self-Timer): Allows you to use the self-timer.

(Burst Settings): Allows you to use the burst shooting mode. (Flash): Allows you to select a flash mode for still images.

x Menu Items

Shooting

GB

20

GB

22

x Setting items

If you press the MENU button while shooting or during playback, (Settings) is provided as a final selection. You can change the default

settings on the (Settings) screen.

*1DSC-HX9V only

*2If a memory card is not inserted, (Internal Memory Tool) will be displayed and only [Format] can be selected.

GB

23

Number of still images and recordable time of movies

The number of still images and recordable time may vary depending on the shooting conditions and the memory card.

x Still images

(Units: Images)

x Movies

The table below shows the approximate maximum recording times. These are the total times for all movie files. Continuous shooting is possible for approximately 29 minutes. The maximum size of an MP4-format movie file is up to approximately 2 GB.

Notes on using the camera

Functions built into this camera

???This manual describes each of the functions of TransferJet compatible/ incompatible devices, 1080 60i-compatible devices and 1080 50i-compatible devices.

???To determine whether your camera supports the GPS function, check the model name of your camera.

GPS-compatible: DSC-HX9V

GPS-incompatible: DSC-HX9

???To check if your camera supports the TransferJet function, and whether it is a 1080 60i-compatible device or 1080 50i-compatible device, check for the

following marks on the bottom of the camera.

TransferJet-compatible device: (TransferJet)

1080 60i-compatible device: 60i

1080 50i-compatible device: 50i

???This camera is compatible with 1080 60p or 50p-format movies. Unlike standard recording modes up to now, which record in an interlacing method, this camera records using a progressive method. This increases the resolution, and provides a smoother, more realistic image.

???In an airplane, make sure to turn off the camera following cabin announcements.

???Do not watch 3D images shot with this camera for extended periods of time on 3D-compatible monitors.

???When you view 3D images shot with this camera on a 3D-compatible monitor, you may experience discomfort in the form of eye strain, fatigue, or nausea. To prevent these symptoms, we recommend that you take regular breaks. However, you need to determine for yourself the length and frequency of breaks you require, as they vary according to the individual. If you experience any type of discomfort, stop viewing the 3D images until you feel better, and consult a physician as necessary. Also refer to the operating instructions supplied with the device or software you have connected or are using with this camera. Note that a child???s eyesight is still at the development stage (particularly children below the age of 6). Consult a pediatrician or ophthalmologist before letting your child view 3D images, and make sure he/she observes the above precautions when viewing such images.

On GPS-compatible devices (DSC-HX9V only)

???Use GPS in accordance with regulations of countries and regions where you use it.

???If you do not record the direction or location information, set [GPS setting] to [Off].

On use and care

Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping, or stepping on the product. Be particularly careful of the lens. GB

25

Notes on recording/playback

???Before you start recording, make a trial recording to make sure that the camera is working correctly.

???The camera is neither dust-proof, nor splash-proof, nor water-proof.

???Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired.

???Do not aim the camera at the sun or other bright light. It may cause the malfunction of the camera.

???If moisture condensation occurs, remove it before using the camera.

???Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

Do not use/store the camera in the following places

???In an extremely hot, cold or humid place

In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.

???Under direct sunlight or near a heater

The camera body may become discolored or deformed, and this may cause a malfunction.

???In a location subject to rocking vibration

???Near a location that generates strong radio waves, emits radiation or is strongly magnetic place. Otherwise, the camera may not properly record or play back images.

???In sandy or dusty places

Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired.

On carrying

Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera.

Notes on the LCD screen and lens

The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

Notes on the flash

???Do not carry the camera by the flash unit, or use excessive strength on it.

???If water, dust or sand get into the open flash unit, it may cause a malfunction.

On camera???s temperature

Your camera and battery may get hot due to continuous use, but it is not a GB malfunction.

26

On the overheat protection

Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera.

A message will be displayed on the LCD screen before the power turns off or you can no longer record movies. In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool enough, the power may turn off again or you may be unable to record movies.

On charging the battery

If you charge a battery that has not been used for a long time, you may be unable to charge it to the proper capacity.

This is due to the battery characteristics, and is not a malfunction. Charge the battery again.

Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing:

???Do not expose the camera to chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide.

GB

27

GB

28

29

GB

30

GB

31