User guide
Bluetooth?? Music Receiver
BM10
User guide
Bluetooth?? Music Receiver
BM10
2
This is an Internet version of this publication. ?? Print only for private use.
Accessory overview
Press to disconnect from the currently connected phone.
Press to reconnect to the most recently connected phone.
3
This is an Internet version of this publication. ?? Print only for private use.
Basics
To power on the music receiver
1Plug one end of the charger cable into the charger.
2Plug the other end of the cable into the Micro USB port of the music receiver. A white notification light illuminates briefly to indicate that the device is powered on.
The music receiver only works when connected to a power source.
To connect the music receiver to a stereo
1Plug one end of the stereo cable into the relevant stereo connectors (Left/ Right) on your music receiver.
2Plug the other end of the cable into the stereo.
4
This is an Internet version of this publication. ?? Print only for private use.
Pairing and connecting
Before you can use your music receiver to play music through a stereo system, you need to first pair the music receiver with your phone. You can pair the devices manually, or you can use NFC. Once paired, the music receiver automatically establishes a connection to your phone.
The internal memory of your music receiver can save and remember up to eight pairings with other phones at any given time.
To manually pair the music receiver with your phone
1Make sure your phone has the Bluetooth?? function turned on.
2Music Receiver: If you are pairing the music receiver with a phone for the first time, the music receiver enters pairing mode automatically. If not, press and hold the Pair/Connect button until the notification light flashes blue.
3Phone: Scan for Bluetooth?? devices, then select BM10 in the available devices list.
4Follow the pairing instructions that appear on your phone. If a PIN code is required, enter "0000".
To pair the music receiver with a phone using NFC
1Make sure that the phone has the NFC function turned on and that the screen is active and unlocked.
2Place the phone over the music receiver so that the NFC detection area of each device touches the other.
5
This is an Internet version of this publication. ?? Print only for private use.
Disconnecting and reconnecting
There are three ways to disconnect your phone from or reconnect it with the music receiver:
???Deselect or select BM10 in the list of paired Bluetooth?? devices in your phone.
???Place your phone over the music receiver so that the NFC detection area of each device touches the other.
???Press the Pair/Connect button.
6
This is an Internet version of this publication. ?? Print only for private use.
Smart Connect
You can use the Smart Connect application on your phone to automatically stream music to the music receiver when the phone is connected with the receiver.
Setting up such an action in the Smart Connect application is known as creating an event. For example, you could create an event that sets the music player to stream music to the music receiver every day at a certain time, for example, while you are taking a tea or coffee break.
Before you can create music events in Smart Connect, you must install the Smart Connect application on your phone.
To install the Smart Connect application on your phone
1From the main application menu of your phone, find and tap Play Store to open the Google Play??? application.
2Tap the search icon at the top right corner and enter "Smart Connect" in the search field, then tap the search icon again.
3Tap Smart Connect.
4Tap Download, then tap Accept & Download.
5Follow the instructions that appear on the screen of your phone to install the application.
To create a Smart Connect event
1Start the Smart Connection application. If you are opening Smart Connect for the first time, tap OK to close the introduction screen.
2Tap 
.
3Give the event a name, then tap Create.
4Under WHEN, add either the accessory or a time interval, or both.
5Under DO THIS, add what you want to happen in your phone.
6Under AT THE END, add what you want to happen when you disconnect the accessory or when the time interval comes to an end. If both these conditions are set, the actions start either when you disconnect the accessory, or when the time interval comes to an end.
7To save the event, press 
.
To add a Bluetooth?? accessory, you have to first pair it with your phone.
7
This is an Internet version of this publication. ?? Print only for private use.
Legal information
Music Receiver BM10
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide.
All rights reserved.
??Sony Mobile Communications AB, 2013
Publication number:
All product and company names mentioned herein are the trademarks or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners.
Visit www.sonymobile.com for more information.
All illustrations are for illustration only and may not accurately depict the actual accessory.
Declaration of Conformity for BM10
We, Sony Mobile Communications AB of
Nya Vattentornet
declare under our sole responsibility that our product
Sony type
and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.7.1, EN 301
Lund, July 2013
Anders Grynge
Director, Head of Global Type Approval
We fulfil the requirements of the R&TTE Directive (1999/5/EC).
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
???Reorient or relocate the receiving antenna.
???Increase the separation between the equipment and receiver.
???Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
???Consult the dealer or an experienced radio/TV technician for help.
8
This is an Internet version of this publication. ?? Print only for private use.
Industry Canada Statement
This device complies with
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian
Cet appareil num??rique de la classe B est conforme ?? la norme
Avis d???industrie Canada
Le pr??sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autoris??e aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et, and (2) l'utilisateur de l'appareil doit accepter tout brouillage radio??lectrique subi, m??me si le brouillage est susceptible d'en compromettre le fonctionnement.
9
This is an Internet version of this publication. ?? Print only for private use.