Parts Manual
Leaf Vacuum
Series
6.5HP Product
Mfg. No. Description
1694489 Leaf Vacuum,
Stratton
Rev. 04/2004
TP
Parts Manual
Leaf Vacuum
Series
6.5HP Product
Mfg. No. Description
1694489 Leaf Vacuum,
Stratton
Rev. 04/2004
TP
Engine, Impeller, Housing & Wheels Group
The above parts group applies to the following Mfg. Nos.:
1694489 - Leaf Vacuum
Engine, Impeller, Housing & Wheels Group
Footnotes
* See your local Briggs & Stratton distributor for parts and service.
The above parts group applies to the following Mfg. Nos.:
1694489 - Leaf Vacuum
Handles, Controls & Bag Group
The above parts group applies to the following Mfg. Nos.:
1694489 - Leaf Vacuum
Handles, Controls & Bag Group
Footnotes
* Bag components are not sold seperately.
The above parts group applies to the following Mfg. Nos.:
1694489 - Leaf Vacuum
Decal Group
75804
DANGER
DANGER FL YING MA TERIAL
DANGER
KEEP HANDS and FEET A WAY
4
The above parts group applies to the following Mfg. Nos.:
1694489 - Leaf Vacuum
Decal Group
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694489 - Leaf Vacuum
Hardware Identification & Torque Specifications
Common Hardware Types
Standard Hardware Sizing
When a washer or nut is identified as 1/2???, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2???, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ?? 20%)
NOTES
1.These torque values are to be used for all hardware excluding: locknuts,
2.Recommended seating torque values for locknuts:
a.for prevailing torque locknuts - use 65% of grade 5 torques.
b.for flange whizlock nuts and screws - use 135% of grade 5 torques.
3.Unless otherwise noted on assembly drawings, all torque values must meet this specification.
Wrench & Fastener Size Guide
MANUFACTURING, INC.